Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e145a
id	sigradi2006_e145a
authors	Heiss, Leah
year	2006
title	Empathy over distance: Wearables as tools for augmenting Remote Emotional Connection
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 66-69
summary	Mainstream communication modes emphasise network speed, connection access, resolution, portability, and aesthetic design as primary to the success of their products. Within this vision a three by four centimetre screen and high resolution display are deemed adequate to emulate the intensities and complexities of face-to-face connection with loved ones. They allow us to ‘be there with you’ from wherever we might be. Yet interpersonal communication is a massively complex phenomenon. It involves a plethora of micro-activities which occur at a physical, physiological, and psychological level allowing us to recognise at a cellular scale intention, motive and emotional authenticity. Our conscious and non-conscious involvement in spatially collocated communication is substantial due to these myriad channels of real-time bi-directional information transfer. While contemporary communications technologies have the capacity to mediate our relationships, they fall short of encouraging the richness of spatially co-present interaction. The research discussed in this paper investigates the potential expansion of remote connection when electronically enhanced apparel is incorporated into the communications mix. Rather than pursuing the manifold functionalities of traditional communications media the garments discussed focus solely on the goal of enhancing empathy between physically distant individuals. This paper reports on the development and testing of a range of garments that conduct presence information between remotely located people. The garments sense, process, transmit and receive the heartbeat wavelength (ECG). They are enabled with ECG sensors, signal processing equipment, small vibration motors, and radio transceivers which allow users to ‘feel’ the heartbeat of a remote friend/lover/relative as vibration through their garment. The prototypes aim to enrich the remote communications experience through reintroducing an embodied, tactile dimension that is present in face-to-face communication. A range of user testing trials will be discussed which have been undertaken to assess the impact of the garments at a conscious and a non-conscious level. Conscious experiences were gauged through qualitative testing, by way of interviews and unsolicited written reactions, which have provided a range of engaging emotional responses. Non-conscious physiological reactions were assessed by recording ECG throughout user-testing periods. This data has been processed using HRV (heart rate variability) analysis software, running on MatLab. Preliminary results suggest that users have strong conscious and non-conscious reactions to the experience of wearing the prototype garments. The paper will describe the data processing techniques and findings of the user testing trials. The development of biosignal sensing garments has raised a range of issues including: innovative potentials for embedded peripheral awareness media; the expansion of the classical body to incorporate remotely sensed information; the issue of data semantics and the development of intensely personal non-verbal languages; and the issue of corporeal privacy when one’s biological information is exposed for potential download. They also bring into question how our bodily experiences might change when we incorporate remote sensory systems.
keywords	Enabled apparel; emotional tools; biosignals
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2006_413
id	caadria2006_413
authors	Bhatt Anand; Martens, Bob
year	2006
title	ON-TO-CAAD: Investigating the Knowledge Contained within the Corpus of CAAD Research
doi	https://doi.org/10.52842/conf.caadria.2006.x.s6g
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 413-424
summary	The work presented here discusses an ongoing research in constructing a knowledge representation system founded on CAAD document repositories and investigating the network of concepts constructed by CAAD research. The approach does not rely on conceptual models or theories about CAAD research, rather a formal semantics amenable to decidable reasoning on the corpus of research in CAAD. A web-based demonstration application is illustrated in the paper in which we discuss two propositions about CAAD research discovered in the process of our investigations.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2006_e068d
id	sigradi2006_e068d
authors	Catovic-Hughes, Selma
year	2006
title	Digital Storytelling: "Memory….. Sarajevo, my personal story"
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 337-340
summary	“It was a fresh summer night, sky deprived of stars, and hardly any signs of life. After hours of waiting, well passed midnight, they finally allowed us to enter. I couldn’t see or hear much, except movements of those in front of me, but judging by intense scent of mildew and worm-like smell of earth, I realized my mile long underground adventure had begun. There was no looking back, only the brave steps ahead into my new, and hopefully, safe and fruitful future.” [ from diary95 ] Just like many teens around the world, I too kept a journal. It began with playful thoughts of a teenage girl, living in Sarajevo, enjoying life. On my fifteenth birthday, those carefree moments were soon replaced with brutal facts of life under siege: Sarajevo and its citizens had been surrounded by the Serbs who took over all the roads leading in and out of the city. Three years later, I was weeks away from graduating high school, and instead of getting excited, I wondered about my future…”Yesterday was awesome -- we had both electricity and water for eight straight hours…hooray!! You could see the lights miles away…the entire city was awake, making pies and bread, washing clothes, watching movies.” [ from diary93 ] Was I going to spend the rest of my life anticipating the restricted electric and water timetable? Would I wake up the next day to see all my family alive? Would I ever have a chance to fulfill my dreams? This project captures the process of [re]tracing steps of my personal journey of leaving Sarajevo to come to the United States and [re]constructing memories as a sequence of spatial events using the artifacts and the text from my war journals. The intent of my project is to define that line between the old and the new, and intertwine and merge its current condition with the facts and memories from the past. Although there was never a permanent “Berlin-wall-like” divider, the natural contours of the river and invisible screens of the snipers served as impermeable walls and divided the city for four years. The implied boundary seemed to be more powerful than the massiveness of the concrete barricades. Is it possible to re-condition something [building, space, soul] to be and feel the same when it had been destroyed and deeply scarred on the inside? Instead of placing banal memorials engraved with the bare facts, how can we make a tribute to a series of events—a time period that changed the fabric of the city—in a more three-dimensional experience? How can we integrate digital phenomenon in the process of the post-war reconstruction to re-trace the past while creating necessary advanced improvements for the new contemporary society? The impact that social conditions have on architecture, art, culture, and ultimately, people can be told in a universal language – digital storytelling, containing pieces of history and personal memories to create representations of time and space of the past, present or future.
keywords	memory; postwar; retrace; reconstruction; memorial
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ascaad2006_paper20
id	ascaad2006_paper20
authors	Chougui, Ali
year	2006
title	The Digital Design Process: reflections on architectural design positions on complexity and CAAD
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	These instructions are intended to guide contributors to the Second Architecture is presently engaged in an impatient search for solutions to critical questions about the nature and the identity of the discipline, and digital technology is a key agent for prevailing innovations in architectural design. The problem of complexity underlies all design problems. With the advent of CAD however, Architect’s ability to truly represent complexity has increased considerably. Another source that provides information about dealing with complexity is architectural theory. As Rowe (1987) states, architectural theory constitutes “a corpus of principles that are agreed upon and therefore worthy of emulation”. Architectural theory often is a mixed reflection on the nature of architectural design, design processes, made in descriptive and prescriptive terms (see Kruft 1985). Complexity is obviously not a new issue in architectural theory. Since it is an inherent characteristic of design problems, it has been dealt with in many different ways throughout history. Contemporary architects incorporate the computer in their design process. They produce architecture that is generated by the use of particle systems, simulation software, animation software, but also the more standard modelling tools. The architects reflect on the impact of the computer in their theories, and display changes in style by using information modelling techniques that have become versatile enough to encompass the complexity of information in the architectural design process. In this way, architectural style and theory can provide directions to further develop CAD. Most notable is the acceptance of complexity as a given fact, not as a phenomenon to oppose in systems of organization, but as a structuring principle to begin with. No matter what information modelling paradigm is used, complex and huge amounts of information need to be processed by designers. A key aspect in the combination of CAD, complexity, and architectural design is the role of the design representation. The way the design is presented and perceived during the design process is instrumental to understanding the design task. More architects are trying to reformulate this working of the representation. The intention of this paper is to present and discuss the current state of the art in architectural design positions on complexity and CAAD, and to reflect in particular on the role of digital design representations in this discussion. We also try to investigate how complexity can be dealt with, by looking at architects, in particular their styles and theories. The way architects use digital media and graphic representations can be informative how units of information can be formed and used in the design process. A case study is a concrete architect’s design processes such as Peter Eisenman Rem Koolhaas, van Berkel, Lynn, and Franke gehry, who embrace complexity and make it a focus point in their design, Rather than viewing it as problematic issue, by using computer as an indispensable instrument in their approaches.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	caadria2006_111
id	caadria2006_111
authors	DAVID HARRISON, MICHAEL DONN
year	2006
title	USING WEB 2.0 TECHNOLOGIES TO PRESERVE DESIGN HISTORY AND IMPROVE COLLABORATION
doi	https://doi.org/10.52842/conf.caadria.2006.x.a7m
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 111-117
summary	This paper describes ongoing research into how emerging Internet concepts used in conjunction with existing Information Technologies (IT) can improve inter-project communication and understanding. The emphasis of the research is to use technology as an enabler to share personal thoughts and enhance the conversation that takes place within a development team. It stems from the observation that the emphasis of many new Architecture, Engineering and Construction (AEC) technologies is to minimise and diffuse project conversation with highly complex, machine interpretable building information models.Project teams are usually brought together for a relatively short but intense period of time. Following project completion these unique teams are dissolved just as quickly and often are never formed again. As a consequence it is difficult to justify the investment in time and resources required to implement complex IT-based collaboration solutions. A further barrier to adoption is the differential application of IT skills across the AEC industry. Therefore in order for a new technology to gain broad acceptance and be most beneficial it must be applicable to the broadest audience with the minimum investment required from all parties. The primary objective of this research is to preserve the rich design history of a project from conception to completion. Submitted information can be intelligently searched using the meta-data sourced from syndicated data feeds about team members, project timelines, work diaries and email communication. Once indexed users can tag documents and messages in order to provide a further, far richer layer of meta-data to assist in searching, identification of issues and semantic clarification. This strategy of defining AEC semantics through social interaction differs greatly from that of more complex, computer interpretable solutions such as Industry Foundation Classes. Rather than abstracting information to suit a generic yet highly intelligent building model, the emphasis is on preserving the participant’s own thoughts and conversation about decisions and issues in order to create a forum for intelligent conversation as the design evolves.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	32b4
id	32b4
authors	Heylighen, Ann; Casaer, Mathias; Neuckermans, Herman
year	2006
title	UNAWARE: SUPPORTING TACIT DESIGN KNOWLEDGE EXCHANGE
source	International Journal of Web-Based Communities, Volume 2, Number 1, Jan 2006, pp.31-44
summary	DYNAMO (Dynamic Architectural Memory Online) is an interactive platform to share ideas, knowledge and insights in the form of concrete building projects among designers in different contexts and at different levels of expertise. Interaction with various user groups revealed two major thresholds: submitting project material to the platform takes time, effort, and specific skills; in addition, designers tend to sense a psychological threshold to share their ideas and insights with others. In response to this ‘free-ridership’, the paper proposes to conceive DYNAMO as an associative network of projects, and develops ideas about how the links in this network can be determined and updated by exploiting insights implicitly available in project documentation and user (inter)actions. This should allow DYNAMO to learn from the insights of all designers using the platform, active contributors and ‘free-riders’ alike, without any awareness on their side and to apply these insights to continuously enhance its performance.
keywords	architectural design; self-organisation; usage logs; connectionism
series	other
type	normal paper
email
last changed	2006/02/01 14:28

_id	acadia06_555
id	acadia06_555
authors	Kudless, A., Vukcevich, I.
year	2006
title	Flexible Formwork Research (FPR)
doi	https://doi.org/10.52842/conf.acadia.2006.x.r8t
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] p. 555
summary	FFR investigates the self-organization of plaster and elastic fabric to produce evocative visual and acoustic effects. Inspired by the work of the Spanish architect Miguel Fisac and his experiments with flexible concrete formwork in the 1960-70s, FFR continues this line of research by exploring aspects of pattern generation and recognition in relation to self-organized form. In line with the theme of the current exhibition, Digital Exchange, the work can be understood as a dialog between physical and digital computation. The form is a result of a negotiation between the digital manipulation of images and the physical deformations of materials under stress. Both digital and physical processes play an equal role in the final form of the plaster tiles.Reflecting on Miguel Fisac’s flexible concrete formwork, there was a desire to investigate the potential for more differentiated patterns while still using the same basic fabrication technique. This was accomplished through the use of a custom-designed script in Rhino that analyzes a given image and translates it into a field of points. These points establish areas of constraint in the elastic membrane of the mould. Through numerous physical tests, the minimum and maximum distances between constraint points was determined and these were entered into the script as limits for the point creation. If the points are too close, large wholes with very thin and weak plaster form whereas if the points are too far apart the amount of elastic deformation is so great that the weight of the plaster can cause failures to occur in the fabric mould. One of the most important aspects of the project is its resonance with the body and our natural attraction and repulsion for certain forms. Through exploring the natural self-organization of material under stress, FFR unintentionally reminds us of our own flesh. The plaster tiles resonate with our own body’s material as it sags, expands, and wrinkles in relationship with gravity, structure, and time.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	2006_244
id	2006_244
authors	Lee, Ji-Hyun and Shu-Feng Pan
year	2006
title	eCAADe: An Educational Commendation Mechanism for the Adaptive Semantic Web to Use in the Architectural Design Environment
doi	https://doi.org/10.52842/conf.ecaade.2006.244
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 244-251
summary	The “Case Studies in Architecture” phase of a course in architectural design includes in-depth comparisons and analyses of architectural precedents. However, with the large number of cases now readily available, Web searching and navigation is a time-consuming, low precision activity. In the work described in this paper, we built eCAADe, an educational commendation system for the adaptive semantic Web to allow students to query and retrieve semantically for architectural cases during the case study phase of an architectural design process. In our suggested system, we built a Semantic Web for design knowledge representation to make query and retrieval efficient. We also applied a hybrid recommendation mechanism, which is combining both content-based filtering and collaborative filtering to help for students to find relevant cases more efficient and precise with their preferences. We illustrate our concepts with several concrete examples.
keywords	Recommendation mechanism; adaptive; semantic Web; architectural cases; ontology
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia06_356
id	acadia06_356
authors	Lonsway, Brian
year	2006
title	The Argument for the Argument Revisiting the Architecture Machine
doi	https://doi.org/10.52842/conf.acadia.2006.356
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 356-371
summary	The argument for the argument, that is, the defense of the computable quantity, has had a profound impact on the contemporary understanding of design practice. In this paper, I explore the history of the architectural-computational ‘argument’ to uncover a generally accepted yet poorly understood collusion between architectural and urban theory, structuralist semantics, and computation. From arguments about the machine to the mechanics of language, and from the language of architecture to the architecture machine, the argument for the argument has radically transformed contemporary design practices, but neither the history nor the theory behind these developments has been critically examined. My own argument seeks to build upon this nexus a hypothetical construct – a post-structuralist computer – as a provocation of sorts: a challenge to contemporary computational work in architecture to critically and philosophically address its current trajectories.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia06_064
id	acadia06_064
authors	Luhan, Gregory A.
year	2006
title	Synthetic Making
doi	https://doi.org/10.52842/conf.acadia.2006.064
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 64-67
summary	Various approaches of virtual and physical modeling have led to a synthetic form of making that is plastic and scalable in nature. This shift from traditional forms of representing and generating architecture now offers a better possibility of full-scale construction and fabrication processes and links transparently to industry. Architects are beginning to dynamically inform the visioning processes of assemblies and design through a range of precise subassemblies. Further to this end, the synthetic techniques and materials are opening up avenues for designers to investigate a range of fibers and fabrics that radically transform light and color renditions, and texture. Investigations in the realm of traditional materials such as stone, wood, and concrete continue to evolve, as do their associated methods of making. As a result of synthetic technologies, architects today have the possibility to work along side industry engineers and professionals to design castings, moldings, patterns, and tools that challenge not only the architectural work of art, but industrial and product design as well. This cultural shift from physical space to virtual space back to physical space and the combination of hand-, digital-, and robotic-making offers a unique juxtaposition of the built artifact to its manufacturing that challenges both spatial conventions and also the levels of precision and tolerance by which buildings are assembled. Traditional forms of documentation for example result typically in discrepancies between the drawn and the actualized which are now challenged by the level of precision and tolerance at the virtual level. It is within this context that leading-edge architects and designers operate today. Yet, how the profession and the academy respond to these opportunities remains an open line of inquiry and addressing these concerns opens up the rich potential enabled through synthetic making.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	acadia06_461
id	acadia06_461
authors	Martens, Bob
year	2006
title	Exploring the Design and Fabrication of Inflatables: “The Taming of the Shrew”
doi	https://doi.org/10.52842/conf.acadia.2006.461
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 461-470
summary	The building materials that help designers or architects achieve their goal of defining and enclosing space are usually concrete, steel, glass or wood. For these materials designers have both empirical data gained from experience and at times complex calculation methods enabling them to use them in their designs in a tangible, reckonable and, consequently, almost risk-free manner. It seems obvious that creating a design with well-known building materials will lead to more or less predictable outcomes. This is a good reason for investigating a design process dealing with air-filled building-elements. Architectural structures look completely different when one employs a “building material” which has not been subjected to either detailed investigations or sophisticated calculations. The “Smart_Air” Design Studio was devised to take a closer look at the unusual building material “air,” which we have only just begun to explore, and to make it the centre of a focused design exercise. The objective was to use “air” or, rather, pneumatic technologies, to arrive at structurally sound solutions for enclosing space, which could be considered a “roof” in the widest sense of the term.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	2006_358
id	2006_358
authors	McMeel, Dermott
year	2006
title	Carnival and Construction - Towards a Scaffolding for the Inclusion of ICT in the Construction Process
doi	https://doi.org/10.52842/conf.ecaade.2006.358
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 358-363
summary	In this paper we explore the process of construction, we consider the construction site as a mediated collaborative environment in which many specialist crafts and esoteric skills are present and negotiated. Concrete information when pass onto a construction site becomes part of a fluid morphing object, the validity and meaning of information can change—or be lost—depending on where and when it is. We look at current models of construction and actual construction process and we explore the notion of Carnival as a tool to reconcile the concrete and fluid aspects to communication dynamics of mediated group working in general and of construction site practice specifically.
keywords	Carnival; ICT; Construction; Mediation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2006_p058c
id	sigradi2006_p058c
authors	Pratschke, Anja; Ribeiro, Clarissa; La Rocca, Renata and Januário, Fernanda
year	2006
title	Da ars mnemônica à ‘ars generativa’: uma reflexão critica sobre a produção arquitetônica na era glocal [From Ars mnemonic to Ars generative: A critical review about the architectural production in a glocal time]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 308-311
summary	The aim of this article is to show the complementarity and actuality of the use of design methods as Mnemonic Structures, Cybernetic and Complexity, for the conception of virtual, mixed or concrete knowledge spaces. The ideas presented in this article inscribe themselves in a larger questioning about the relation of architectural design process and digital culture, discussed in our research group nomads.usp [Center for Interactive Living Studies, http://www.eesc. usp.br/nomads].
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	caadria2006_605
id	caadria2006_605
authors	RICHARD DANK, ANDREAS GRUBER
year	2006
title	RYUGYONG.ORG: Other Levels to the Ryugyong Hotel: An idea on architecture and geopolitics
doi	https://doi.org/10.52842/conf.caadria.2006.x.d2g
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 605-607
summary	The prestigious international monthly architecture periodical Domus opens its June 2005 issue with the lines: "A ruin of the future? The 330-metre-tall skeleton of an unfinished hotel towers like a concrete pyramid over North Korea's capital, Pyongyang." The magazine's call "to transform the Ryugyong Hotel into a worldwide antenna for ideas" (Boeri et al. 2005, cover) was a pronunciamento we could not resist.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2006_c012b
id	sigradi2006_c012b
authors	Rodriguez Barros, Diana and Carmena, Sonia
year	2006
title	Estudio Descriptivo de Prácticas Padagógicas Mediadas por Tecnologías Digitales en Facultades de Arquitectura y Diseño asociadas a la buena Enseñanza [Descriptive study of pedagogical practices mediated by digital technologies in school of architecture and design, associated to the good education]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 191-194
summary	It is presented a descriptive type study link to the documentary investigation. It is considers to understand, interpretate and critically reconstruct the present practices of proyectual education in studio of school of architecture and design of the region in virtual surroundings, tie to good education. It was used the Burbules & Callister (2001) new emergent postecnocratic approach. It is boarded from the perspective of the authors, in its natural scenes, in its all complexity and its implicances. One worked with a quanti-qualitative methodology, where revision techniques, analysis, evaluation and interpretation of documental textual and visual materials from primary sources were integrated. One has been based on the selection of exposed works in Sigradi congresses, since its creation in 1997 to the present, with extended and updated versions of the authors. As conclusions are recognized professors that show expertise and disciplinar control, that develop investigation tasks tie to the education practices, that incorporate technologies valuating limitations and advantages, and that has recognized the multiple implicit effects in the technologically mediated practices.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	acadia06_538
id	acadia06_538
authors	Senagala, Mahesh
year	2006
title	Light Exchange
doi	https://doi.org/10.52842/conf.acadia.2006.538
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 538-539
summary	The notions of collaborative exchanges, leadership, and entrepreneurialism that cross disciplinary boundaries were promoted in a digital design-build studio taught in spring 2005. With the starting funds of one dollar, the studio took up the challenge of building two full-scale tensile fabric structures that mark the entrances to a downtown San Antonio building. Structures of 1200 square feet total surface area were successfully designed, engineered, and executed within a semester framework at a final cost of $102,490. Collaborations were fostered with 24 industry partners from Asia, Europe, Australia, and USA, including four structural engineers. Innovative pedagogical, collaborative and project management methods were employed. The studio was structured as a self-organized design “firm.” Positions were created and students were “hired” into the firm to play different roles. The studio utilized web-based communication and project management tools. After a four-week warm-up project that established an innovative studio culture, professional schedules were prepared and the engineers were engaged in the collaborative process of designing the anchors, cables, connections and PTFE/PVC membranes. The peculiarities of digitally designing, fabricating and erecting tensile fabric structures were comprehensively explored. The studio completed all the CNC fabrication, concrete footings and membrane fabrication at local workshops through special partnerships.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	68f0
id	68f0
authors	Talbott K, Snyder G and Dicker J
year	2006
title	Design + Virtual Modeling: Course Integration on a Large Scale
source	Marjanovic I and Robinson C (eds) Intersections: Design Education and Other Fields of Inquiry, Proceedings of the 22nd National Conference on the Beginning Design Student, Ames, Iowa, April 2006, 309-313
summary	Starting in 2001 a group of faculty at the University of Wisconsin – Milwaukee School of Architecture and Urban Planning undertook a three year effort to integrate introductory studio with introductory computer-aided design. Each year 160 incoming sophomores begin their first design studio. They also receive a laptop computer and begin concurrent enrollment in an introductory computer course entitled Virtual Modeling. Students participate in studio projects, computer assignments, hand drawing tutorials, computer tutorials, studio course lectures and computer course lectures. This takes the dedicated effort of four faculty members and five graduate teaching assistants. The goals of this paper are 1) to describe the evolution of this large-scale integration effort, 2) to identify key success factors, and 3) to describe the impact on our students’ beginning design education. The paper provides a balanced perspective by discussing both benefits and challenges. It begins with more concrete information and moves gradually into deeper issues.
keywords	pedagogy, design studio, collaboration, curriculum
series	other
type	normal paper
email
last changed	2006/08/13 06:49

_id	caadria2006_007
id	caadria2006_007
authors	TOYO ITO
year	2006
title	CHANGE THE GEOMETRY TO CHANGE THE ARCHITECTURE
doi	https://doi.org/10.52842/conf.caadria.2006.x.e8f
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 7-18
summary	Over these last hundred years since the beginning of the twentieth century, the world's population has increased from 1.6 billion to 6 billion. At the same time, people have concentrated in urban areas in ever greater numbers. As a result, society has suddenly been obliged to construct quantities of buildings rapidly and economically. In responding to this challenge, the demand has been for architecture independent of any special regional or environmental character, simple homogeneous spaces that could be factory-produced. Modernist architecture gave theoretical bases to societal demands as well as a normalized aesthetic mean. Under the ideological banner of Mies van der Rohe's dictum "Less is more," the Modernists drew up beautiful continuous spaces on a uniform grid. While Le Corbusier's assertion that "The house is a machine for living in" found concrete expression in an idealized architecture of pure geometric forms--circles, cubes, cylinders.
series	CAADRIA
last changed	2022/06/07 07:49

For more results click below: