Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2007_038
id	ecaade2007_038
authors	Campbell, Cameron
year	2007
title	The Kino-eye in Digital Pedagogy
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 543-550
doi	https://doi.org/10.52842/conf.ecaade.2007.543
summary	“I am the kino-eye” states Dziga Vertov in his classic movie The Man with the Movie Camera (1929). The relationship of the cameraman, the subject, and audience is a dynamic that he investigates through cinema. It is also a dynamic that inspires an innovative way for advanced digital media to be explored in architecture pedagogy. This paper is focused on three ways to translate the cinematic relationship developed in Dziga’s work to digital media in architecture: the way designers capture and manipulate digital media to make architecture; how the discourse of film and architecture can be informed by an understanding of the manipulation of digital media; and the role of digital media production as a form of research for architecture. The film is noteworthy because it is not a typical narrative screenplay, rather it is a visual experiment. In standard films the perceptions of space are manipulated through the camera and through other means, but the audience is rarely aware of it. However, Vertov is acutely aware of this dynamic and engages the audience by self-consciously using what would otherwise be considered a mistake – the viewer is aware that the camera looks at his/her own relationship with film not just the relationship of camera and scene. The translation of this into the classroom is that the same tools allow designers to be critical of their relationship with the medium and the way media is used to make architecture. This concept can be applied to any medium, but in this class it is applied to how students relate with produced motion images and editing that into a video production. The three elements described in this text are key aspects of not simply producing short films, but an opportunity to actually be introspective of architecture through an alternative media. Student projects include video montages that develop a cultural perspective on design and projects that are self-conscious of technology and how it impacts the production. The film-work necessary to achieve these productions is simultaneously conscious of the way in which the author relates to the scene and conscious of how that scene is edited in the context of the production.
keywords	Pedagogy, video, hyperspace, film
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2007_329
id	caadria2007_329
authors	Jacobs, Zhya
year	2007
title	Capturing the Infinite: Bottom up CAD - CAM Technology for Regenerative Development
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.b0l
summary	In most design practices there is a division between the generation of information to describe buildings and the production of information to construct them. Today architects are in charge of the design of the building (aesthetics) while the contractor is accountable for the means of construction (tectonics). The advent of digital technologies within the field of architecture however has begun to cause and will continue to cause fundamental changes within the AEC industry. The Paper describes a possible scenario where a Bottom – Up, part to whole approach to architecture can be adopted using the freedom afforded by Parametric Design within the CAD-CAM environment. This approach is explored through the design of a smart block in concrete that is integrated into a wall system.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20075214
id	ijac20075214
authors	Kalay, Yehuda E.; Grabowicz, Paul
year	2007
title	Oakland Blues: Virtual Preservation of Seventh Street's 1950'5 Jazz Scene
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 438-453
summary	Digital technologies are becoming a popular vehicle for the re-creation and dissemination of cultural heritage, in the form of modeling buildings, people, and their activities. Video game engines can be used to let user virtually "inhabit" the digitally recreated worlds made accessible via the Internet, opening them up to people who otherwise would never be exposed to these cultural sites. Yet, like every medium ever used to preserve cultural heritage, digital media is not neutral: it impacts the represented content and the ways the audience interprets it. Perhaps more than any older technology, it has the potential to affect the very meaning of the represented content in terms of the cultural image it creates. This paper examines the applications and implications of digital media for the recreation and communication of cultural heritage, drawing on the lessons learned from a project to recreate the thriving jazz and blues club scene in West Oakland, California, in the 1940s and 1950s.
series	journal
last changed	2007/08/29 16:23

_id	acadia07_096
id	acadia07_096
authors	Kalay, Yehuda E.; Grabowicz, Paul
year	2007
title	Oakland Blues: Virtual Presentation of 7th Street’s 1950’s Jazz Scene
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 96-103
doi	https://doi.org/10.52842/conf.acadia.2007.096
summary	Digital technologies, in the form of modeling buildings, people, and their activities, are becoming a popular vehicle for the re-creation and dissemination of cultural heritage. Together with video game engines, they can be used to let users virtually “inhabit” the digitally recreated worlds. Yet, like every medium ever used to preserve cultural heritage, digital media is not neutral: perhaps more than any older technology, it has the potential to affect the very meaning of the represented content in terms of the cultural image it creates. This paper examines the applications and implications of digital media for the recreation and communication of cultural heritage, drawing on the lessons learned from a project that recreates the thriving jazz and blues club scene in West Oakland, California, in the 1940s and 1950s.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	sigradi2007_000
id	sigradi2007_000
authors	Maganda Mercado, Adriana Gómez (et. al)
year	2007
title	Sigradi 2007: Communication in the Visual Society [La Comunicación en la Comunidad Visual]
source	Proceedings of the 11th Iberoamerican Congress of Digital Graphics Graphics / ISBN 13 978-968-7451-15-2] México D.F. - México 23-25 October 2007, 467 p.
summary	In a simple communication model we must talk about the understanding between participants. This is the result of a continuing connection and a dialog of agreements and disagreements in order to arrive at sharing an idea. However, society today is in an evolutionary lapse at an accelerated pace that interjects itself in this process. It is here where social forces distend and generate important ruptures between generations and individuals that fight to prevail or impose new languages and lifestyles. Today's society has become a visual society whose effect has been reinforced through technology in the devices that we use on a daily basis. The daily use of technology and its new languages has marked a disconnection between individuals that must be closed by using a new acculturation and teaching models. Disconnection is a omnipresent modern phenomenon that can be felt as the main effect in what specialists call the digital gap. This gap not only separates generations, but also ideologies with respect to the form in which we perceive, transmit and teach in our society today. This disconnection can be easily understood through a school system that has been designed for a manufacturing and agricultural world. However, many sectors within our society have been in state of constant change and evolution. This situation generates many opportunities where an agile society is required in response to these new local and global challenges. The students of today have, for example, multi-tasking abilities that better assimilate these changes. The researchers, Ian Jukes and Anita Dosaj refer to this disconnection as the result of poor communication between digital natives (our present-day students) and digital immigrants (many present-day adults). This phenomenon results in the fact that parents and educators speak the digital dialect as a second language, and because of that are lacking in their models of communication. For example, digital natives prefer a variety of sources with rapid access, while the digital immigrants prefer slower, more controlled sources that are limited and regulated. Nowadays, our educational or production activities in which we find ourselves immersed on a daily basis cause us to participate in a wide range of processes of production, dissemination and analysis of visual forms as part of our final product or service. Much of the work that we elaborate in movies, video and photography explore meaning, perception and communication in context as well as anthropological and ethnographic themes. Using this framework for our society today, the importance of the search for the promotion of the study of visual representation and the media for the greatest development and generation of benefits is brought to the fore. Through the use of images we can describe, analyze, communicate and interpret human behavior. All these settings, full of digital disconnections and reencounters, impact on all the visual aspects of culture, including art, architecture and material objects, influencing the bodily expressions of human beings. We have created a visual society when we put emphasis on the meaning and interpretation of all we receive through our visual sense. Wherever we look, we find objects that have been modified beyond their primary function to communicate messages. In this ecosystem we are consumers and suppliers. The communication and research needed to achieve reconnection, as well as the creation of new forms of production and visual understanding, are the themes on which the works contained in this edition are centered.
series	SIGRADI
type	normal paper
more	http://www.sigradi.org
last changed	2016/03/10 09:55

_id	sigradi2007_af06
id	sigradi2007_af06
authors	Chiarella, Mauro; Underlea Bruscato; Rodrigo Garcia Alvarado; María Elena Tosello; Hernán Barría Chateau
year	2007
title	3x1 Digital Hybrids: International workshops and videoconferences about digital architecture [3x1 Híbridos Digitales: Talleres y videoconferencias internacionales sobre arquitectura digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 135-140
summary	Through the creation of an inter-text of different discursive levels, although for “natives as for digital immigrants”, it has developed a teaching experience in three Latin American scenarios (Chile, Argentina, Brasil), through two pedagogical modalities: international videoconferences and in person practical workshops. The videoconferences facilitated the general theoretical discussion, stating multiples contents, anticipating and framing the later activity of the in person workshop, and returning in discussions and critical insights at the end of each workshop. In the in person workshops, new design strategies of generation of spaces and surfaces were entered upon, through analog-digital resources of ideation and representation.
keywords	Hybrid; videoconference; workshop; fold
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2007_af56
id	sigradi2007_af56
authors	Dorta, Tomás
year	2007
title	Ideation and Design Flow through the Hybrid Ideation Space [Ideación y flujo de Diseño a través de un Espacio de ideas Hibrido]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 418-422
summary	This study assesses an innovative immersive sketching and model making system: the Hybrid Ideation Space (HIS). The system enables designers to sketch and make models all around them in real-time and real scale using a digital tablet (sketches), image capture (physical models) and a spherical projection device (immersion). We carried out an experiment to evaluate this system using the concept of Design Flow and workload with industrial design students working in teams during the ideation stage of the design of a car. The HIS was compared to analog tools and hybrid techniques.
keywords	Ideation; Flow; Sketches; Models; Immersion
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia07_056
id	acadia07_056
authors	Dritsas, Stylianos; Becker, Mirco
year	2007
title	Research & Design in Shifting from Analog to Digital
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 56-65
doi	https://doi.org/10.52842/conf.acadia.2007.056
summary	In this paper we track the evolution of computational design from its analog origins to its contemporary digital regime. Our long term goal is to qualify and quantify the implications of digital computation on design thinking and its influence on the architectural practice. Meanwhile, we present the results of our past few years of collaborative research in design and computation that illustrate the nature of the intellectual engagement required for appreciating the potential of digital design thinking and making. In a temporal frame, these results are expressed as a constellation of punctuated innovations emerging sporadically during the painstaking process of tackling architectural problems using digital means. In the long run, they hopefully amount to an approach to fleshing out a paradigm shift from analog to digital and building a knowledge foundation of architectural methods.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	cf2007_061
id	cf2007_061
authors	Stavric, Milena; Heimo Schimek and Albert Wiltsche
year	2007
title	Didactical Integration of Analog and Digital Tools into Architectural Education
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 61-70
summary	This paper describes the new syllabus of the course “Methods of representation” that has evolved in the first year of architectural study at our university. Due to the rapidly growing digital possibilities students need to know/learn the new topics and tools which are relevant in modern architectural design practice. Our students should be empowered rather than overwhelmed by the arsenal of digital tools available today. In this course we try to define the essential skills in representation which we achieve through the synthesis of digital and analog methods and tools. Digital and analog methods and tools we use are: study and construction of complex geometry, observation and analysis of organic forms and their representation through hand drawing, collaborative work through peer-to-peer learning on our web interface, NURBS-modelling, rapid prototyping and desktop publishing.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ascaad2007_006
id	ascaad2007_006
authors	Afify, H.M.N. and Z. A. Abd ElGhaffar
year	2007
title	Advanced Digital Manufacturing Techniques (CAM) in Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 67-80
summary	Building projects today are not only born out digitally, but they are also realized digitally through "file-to-factory" processes of computer aided manufacturing (CAM) and computer numerically controlled (CNC) technologies. It was the challenge of constructability that brought into question, what new instruments of practice are needed to take advantage of the opportunities opened up by the digital modes of production, instead of whether a particular form is buildable. In this case of building construction, architects could design with attention to innovative details, afforded by unique shapes and sizes, knowing that whatever they created on their computer screen could be fabricated digitally for an affordable price. The aims of the research are to discuss and analyze the digital manufacturing techniques (CAM) in architecture and its fabrication, production process. To understand how these technologies fit within a broader context of architectural practice. The research begins with defining, what is digital manufacturing in architecture, its potentials, components and influences in the contemporary architecture. Further more it discusses the digital fabrication, Two- dimensional cutting, subtractive fabrication, additive fabrication and formative fabrication. The assembly technique, building skin, new materials and mass- customization in digital manufacturing techniques (CAM). That will be a hand in analyzing several case studies.
keywords	Digital technology in architecture, Digital manufacturing, Formative fabrication, New materials, Fabrication machines and software.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	acadia07_276
id	acadia07_276
authors	Anders, Peter
year	2007
title	Designing Mixed Reality: Principles, Projects and Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 276-283
doi	https://doi.org/10.52842/conf.acadia.2007.276
summary	Mixed Reality is an increasingly prevalent technology that merges digital simulations with physical objects or environments. This paper presents principles for the design of mixed reality compositions. The principles are illustrated by projects and experiments by the author involving architecture and robotics.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ascaad2007_039
id	ascaad2007_039
authors	Bakr, A.F.; I. Diab and D. Saadallah
year	2007
title	Detecting Inefficient Lighting Solutions: Step-by-Step Geographic information system (GIS) Technique
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 491-504
summary	Outdoor lighting is used to illuminate roadways, parking lots, yards, sidewalks, public meeting areas, signs, work sites, and buildings. It provides us with better visibility and a sense of security. When well designed and properly installed, outdoor lighting can be and is very useful in improving visibility and safety and a sense of security, while at the same time minimizing energy use and operating costs. But, because nobody thought at this, most street lights shine light not only on the nearby ground, where is needed, but also miles away and skywards. Thus a large fraction of the light is lost, at consumer expense and without his/her consent. In the other hand, shortage in street light may cause more crimes as well as accidents. Most of the wasted or short light comes from the poorly designed street lights. Billboards, decorative lights, poorly shielded security lights are part of the problem too, but the main culprit for the waste and ugly glow one sees above one's head at nights is from the streetlights. Thus, recent computer technology gives us tools to be employed for testing the quality of light. Geographic Information System (GIS) software could be utilized to achieve that mission through applying mapping technique. This technique could analyze digital photographs and define light polluted areas as well as bad lighted. This paper reveals that step by step technique, which employs hybrid technologies to solve such problem for better planning decisions.
series	ASCAAD
last changed	2008/01/21 22:00

_id	sigradi2007_af101
id	sigradi2007_af101
authors	Barci Castriota, Leonardo; Carla Viviane da Silva Angelo
year	2007
title	Digital technology and accessibility: The Rede Latino-americana de Acervos de Arquitetura e Urbanismo (RELARQ) [Tecnologia digital e acessibilidade: A Rede Latino-americana de Acervos de Arquitetura e Urbanismo (RELARQ)]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 200-204
summary	The new digital technologies offer new possibilities of interconnection and re-connection that are reconfiguring the diverse areas of knowledge and the diverse fields of human action. In this direction, this work reflects on the proposal of the creation of the Latin American Network or Architectural Archives (RELARQ), pioneering initiative in our continent that aims to create a basis of cooperation between the diverse Brazilian and Latin-American institutions, with the objective to congregate, in an online catalogue, accessible to all, the information contained in hundreds of institutions distributed all over the continent, that will count with a common methodological basis for digital treatment and access to the images. With the RELARQ, the area of the History of Architecture will have a new, powerful tool in as far as the researchers will be able to access archives in the most distant places of our continent.
keywords	Architecture; digitalization; photography; accessibility; internet
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2007_301
id	caadria2007_301
authors	Barrow, Larry; Shaima Al Arayedh
year	2007
title	Emerging Technololgy – Dilemma and Opportunities in Housing
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.d7c
summary	Digital Technology has transformed industrial manufacturing and production; and an array of Industrial Design products provide increasing comfort and benefit to millions of global citizens via ergonomic and mass production/customization strategies. Yet, housing needs of a rapidly growing global population are rarely affected by digital technology. Shifts in societal demographics, from rural to urban city centres, and concurrently Global Warming and ecological changes are exacerbating the world housing situation. Millions are homeless, live in inadequate shelter, or as in the US Manufactured Housing (MH) market, live in nondurable poor quality “manufactured” houses that are detrimental to health, at best, or during extreme weather events, suffer catastrophic damages often resulting in death to occupants. Nevertheless, housing concepts and related living units have benefited very little when compared to architecture’s related manufacturing industries counter-parts (i.e. automotive, aerospace, marine industries, etc). While Technology has vividly expanded the shape language of architecture (i.e. Free-Form-Design), some may argue that Free-Form- Design buildings generally have beauty that is only “skin deep” and typically focus on providing signature statements for both the designer and elite clientele. In this paper, we will briefly review the role of the architect in the US Manufactured Housing industry; additionally, we will identify the major problems that plaque the US Manufactured Housing Industry. Further, we will review how architects and Industrial Designers use technology in their respective fields and draw larger designmanufacture principals for issues of global housing. Our findings and analysis suggest that an Industrial Design approach, applied in architecture for mass housing, offers a means of improving the architect’s role and technology in manufactured housing for the masses.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_045
id	ascaad2007_045
authors	Bazlamit, R. and M. Verma
year	2007
title	Nature Replay: An immersive installation
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 571-586
summary	This project aims at addressing playgrounds and their utilization in current urban scenarios, in developing and under-developed countries. It experiments with digital technology to re-create a play space wherein children can actively engage with each other and the space utilizing upon a unique medium of play. As playgrounds have traditionally always been situated within a natural habitat or environment, this further reinforces the concept of developing the idea- based on something closely related to nature. Working around notions related to nature, music and how can children play around them; conceptualized ‘Nature rePlay”; an immersive environment making use of interactive digital media in both real urban settings and performing arts.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_088
id	ecaade2007_088
authors	Bechthold, Martin
year	2007
title	Teaching Technology: CAD/CAM, Parametric Design and Interactivity
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 767-775
doi	https://doi.org/10.52842/conf.ecaade.2007.767
summary	The paper discusses a project-based approach to technology teaching, and examines the case of the mobile information unit (MIU) for Harvard University and its art museums. A student competition was held to explore design alternatives for this unit. The winning entry proposed an interactive, pixilated fiber-optics display as well as touch screens. Parametric digital modeling was used in the design and design development of the scheme. Research included the study of structural alternatives, fabrication methods and the modes of interaction between users and the MIU.
keywords	Computer-aided design and manufacturing, fabrication, simulation, prototype, fiber optics
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_095
id	ecaade2007_095
authors	Benton, Sarah
year	2007
title	Mediating between Architectural Design Ideation and Development through Digital Technology
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 253-260
doi	https://doi.org/10.52842/conf.ecaade.2007.253
summary	Negroponte (Negroponte 1969) described how the creative thinking of a designer can become affected by the ‘machine’ urging the designer to draw a distinction between ‘heuristics of form’ and ‘heuristics of method’. This ensured that by taking advantage of digital technology a symbiotic relationship was maintained between both of these. To date architects have investigated digital tools for generating form and imagery with increasing success, but have arguably fallen short of using those tools for advancing their design methods. The research presented here explores questions not solely focusing on the use of the tools, but on heuristic methods of the profession, to examine the interconnectiveness of the design method and the tool in a symbiotic fashion; to examine the nature of creativity. This paper is taking a critical standpoint about the place of digital tools in an architect’s method in the pursuit of poetic architecture and, in particular, its representation, to enable speculation, as opposed to prediction, of ideas in the design process from the early phases. The issue is discussed through the findings of my doctoral research case studies that have proved germane to my particular enquiry, that is, digital mediationbetween design ideation and design development.
keywords	Ideation, development, design process, digital techniques, animation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20075307
id	ijac20075307
authors	Bessone, Miriam; Miro, Ricardo Perez
year	2007
title	Music and Architecture: Bonds, Interrelations, Transductions
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 551-569
summary	Digital technology and knowledge integration between musicians and architects enable us to explore and redefine links between music and architecture. This paper describes the experience and results of the creative processes undertaken by music and architecture students and academics to achieve a hyper-medial composition. The processes embrace the simultaneous construction from music to visual form and vice-versa. This exploration is originated from electro-acoustic music works, written ad-hoc, and based on specific assignments especially designed and framed within two types of situations and links with digital technologies: independent actions and interrelated actions. The intention of this work is to obtain constants and/or variables capable of allowing a certain type of graphic conventionalization that will make possible the mathematic representation previously necessary to create specific software tools.
series	journal
last changed	2007/11/20 18:06

_id	ijac20075305
id	ijac20075305
authors	Cabral, Claudia Pianta Costa
year	2007
title	ZOOM-IN, ZOOM-OUT: Architectural scale and digital technology
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 523-534
summary	This paper aims at contributing to the study of the relationship between technology, knowledge and representation. It is based on previous studies on architecture, art and technology in modernity and its development, as well as on studies about scale in architectural design. In despite of the fact that scale can be technically considered indifferent for computer-aided design, I intend to discuss how digital tools intercede in the process of clipping that selecting a specific scale eventually implies sustaining that, for architectural design, the concept of scale has to do both with representation and with knowledge of reality.
series	journal
last changed	2007/11/20 18:06

For more results click below: