Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_677
id	caadria2007_677
authors	Anbusivan, R.
year	2007
title	Automation of Passive Solar Design System
doi	https://doi.org/10.52842/conf.caadria.2007.x.l5x
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research, focus on the automation of passive solar design system using computational method. The quantitative nature of passive solar design system makes the automation possible. The automation is done in stages, because implementing the passive solar design system is not an isolated process, but intertwined with the overall design process. The first phase of automation concentrates in conceptual stage, to avoid major deviations in later stages of the design. The conceptual stage use Eco-grammar (A preset Design guidelines for corresponding climate) and user inputs for initial form generation. The second stage of automation is done after the user finalize the model with respect to its position rotation and arrangements. In this stage manipulation of vertex, edges and faces of the forms were manipulated using genetic algorithm. The value of mutation or crossover done in genetic algorithm is suggested by knowledge engine (preloaded design knowledge). Until the form obtains or reach closer to the desired values of performance the loop between analysis and mutation, crossover will be continued. On the basis of analysis result further manipulations may change from the previous which is guided by the knowledge engine.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_233
id	caadria2007_233
authors	Hoseini, Ali Ghaffarian; Rahinah Ibrahim
year	2007
title	Using Social Network Analysis for Visualising Spatial Planning During Conceptual Design Phase
doi	https://doi.org/10.52842/conf.caadria.2007.x.i8r
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Spatial diagramming exercises with clients are difficult when most clients are not able to visualize the end results of their requirements. This paper would like to introduce a computational tool—Social Network Analysis (SNA)—commonly used in the communications field to study relationships between people we believe can resolve this visualization problem. Our research intent is to affirm whether or not we can use SNA as a spatial planning tool during conceptual building design. We posit that since the nodes and structural relationships between the nodes may have similar architectural characteristics, the tool would enable architects to make changes by moving any spaces on a floor plan while safely maintaining their spatial relationships to other spaces. In this paper, we would like to develop a proof-of-concept model using an available SNA tool to facilitate spatial diagramming visualization during conceptual design phase. We tested the use of a SNA tool at four levels. The first level determined whether we could develop spatial relationship between functional spaces (such as the living room must be adjacent to the front entry). The second level is on setting priorities values for the different nodes and the linkages. The third level determined whether we could develop grouping relationship between several functional spaces that have a common characteristic (such as public versus private spaces) on one horizontal plane. The final fourth level determined whether we could develop multiple layers that are connected by one common connector (such as a staircase in a double-story house). Our models are validated intellectually by visual comparison between our model and another diagramming by Nooshin (2001) that was developed manually. We are most interested in the fourth level because complexity in the spatial diagramming exercises is caused by multi-layered spatial arrangements at the horizontal and vertical planes. We expect our study to provide us guidelines in developing a prototype for a spatial diagramming tool using SNA, which architects can use to resolve visualization problems when conducting the exercise with their clients.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_222
id	ecaade2007_222
authors	Turkienicz, Benamy; Bellaver, Bábara; Grazziotin, Pablo
year	2007
title	CityZoom
doi	https://doi.org/10.52842/conf.ecaade.2007.375
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 375-382
summary	In the last twenty years, computer tools have progressively enabled the modeling of buildings and cities in lesser time and cost, along with an increase in the results quality. A city modeled according to planning regulations usually present a correlation between plots and buildings dimensions. The representation of such correlation for a large number of plots requires repetitive work, thus suggesting the use of a computational tool to perform the task. Existing CAD, GIS, and VR software can generate accurate representations of the reality, but have no capabilities to simulate the impact of alternative urban regulations for large number of plots in a short period of time. CityZoom is a Decision Support System for urban planning, with a specific built-in city model, where data is represented in an object-oriented model representing the urban structure. CityZoom not only provide CAD tools, but a shell where different performance models can operate iteratively. It can simulate given urban regulations applied to a set of urban plots, as well as address environmental comfort issues such as shadow casting between buildings. Results can be displayed as tables, graphs, and in a 3D preview of the whole city or part of it. It’s also possible to export them to commercial GIS tools, to perform different data analysis. The graphical outputs make for an easy understanding of the results by laymen, an important feature for participatory planning, while the display of the correspondent numerical data enable correlations with indicators and parameters of urban quality.
keywords	CityZoom, urban planning, building simulation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	bsct_senses
id	bsct_senses
authors	Senses, Nilufer
year	2007
title	Foam Structures: A Comparative Structural Efficiency Analysis Based on the Building Case "Watercube"
source	Vienna University of Technology; Building Science & Technology
summary	Foam structure in macro-scale has arisen as a new type of large span building structure recently which is a product of cooperation of advanced structural design, radical architectural design approach, and computer and software technology, and efficiency of foam structure became an important question to answer which could help further structural improvements. This study analyses efficiency of large span foam structure relative to conventional large span building structures with a parametric simulation method. Space frames are a special case of conventional large span structures one compared with foam structures, because it satisfies criteria such as being lightweight and three-dimensional as foam structure. Analysis is based on the comparison of base cases of foam model and space frame model, which are developed on light of real projects the Water Cube and the Symbol Zone of Expo’70, based on the parameters structural depth, weight and displacement, and vertical and horizontal load cases. During the analysis structural behavior of base cases were simulated by using a special structural behavior simulation program. It was found that foam model is more efficient than space frame model in terms of structural depth which is an important issue for large span building structures from both architectural and engineering point of view. Capability of spanning large distance with significantly less structural depth makes foam structure a preferable, new generation, steel structure for large spans. Moreover, the development process of base case foam model demonstrated the critical importance of geometrical design concerns of foam structure. Structural behavior simulations were exposed that structural optimization is one of the vitally important process of structural design of the foam structure.
keywords	Foam structure, space frame, geometrical optimization, structural optimization, structural behavior simulation
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ecaade2007_011
id	ecaade2007_011
authors	Tessmann, Oliver
year	2007
title	Structural Analysis as Driver in Surface-based Design Approaches
doi	https://doi.org/10.52842/conf.ecaade.2007.109
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 109-115
summary	This ongoing research argues for novel strategies to integrate structural analysis data in an architectural design approach. Instead of a linear procedure of synthesis, analysis and post-rationalisation a synthesis/analysis loop is installed that uses structural analysis data as design driver from early on. The approach is not aiming for a pure force-driven form-finding or optimization process but regards structural performance as one design criteria among others. Equilibrium between multiple parameters is aspired instead of a single-parameter-optimum. The research is conducted by a custom-made digital interface between a 3d modelling software and an application for structural analysis of space frames structures. Surfaces are translated into meshes with supports at user-defined nodes and then exposed to its dead load in the structural analysis software. The resulting nodal deviation is feed into an algorithm that steers the appropriate reaction towards the local stresses and deviations, taking into account the mesh topology, its supports and their position in the mesh. The initial mesh is optimized in shape transformed back into a double-layer surface model in the 3d software which evolves into an interconnected two-layer space frame. An instant feedback from synthesis to analysis and vice versa is installed. Analysing techniques migrate into the realm of synthesis.
keywords	Optimization, collaborative design, structure and surface
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2007_030
id	ecaade2007_030
authors	Colakoglu, Birgul
year	2007
title	Design by Grammar:
doi	https://doi.org/10.52842/conf.ecaade.2007.919
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 919-925
summary	The use of shape grammars in the context of architectural design project has not been widely explored. This paper describes hybrid analysis/original design applications of grammars in conjunction with student design projects and the issues in creating hybrid grammars that respond to a specific context.
keywords	Computational design methods, shape grammars, hybrid grammars, precedent base design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2007_186
id	ecaade2007_186
authors	Economou, Athanassios; Grasl, Thomas
year	2007
title	Sieve_n
doi	https://doi.org/10.52842/conf.ecaade.2007.947
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 947-953
summary	A computational approach for the generation of all partial lattices of two-dimensional shapes with an n-fold symmetry axis is presented and an application in formal analysis in architectural design is presented in the end.
keywords	Shape studies, generative design, group theory, graph theory, shape grammars, central buildings
series	eCAADe
email
last changed	2022/06/07 07:55

_id	c2f9
id	c2f9
authors	Friedrich E, Derix C and Hannah S
year	2007
title	Emergent Form from Structural Optimisation of the Voronoi Polyhedra Structure
source	Proceedings of the Generative Arts conference, Milan, 2007
summary	In the course of the exploration of computational means in the architectural design process, in order to investigate more complex, adaptive geometries, the Voronoi diagram has recently gained some attention, being a three-dimensional space-filling structure which is modular but not repetitive. The project looks at the Voronoi diagram as a load-bearing structure, and whether it can be useful for structural optimisation. Hereby the edges of the Voronoi polyhedra are regarded as structural members of a statical system, which then is assessed by structural analysis software. Results seem to indicate that the Voronoi approach produces a very specific structural as well as spatial type of order. Through the dislocation of the Voronoi cells, the statical structure becomes more complex through emergent topology changes, and the initially simple spatial system becomes much more complex thorough emerging adjacencies and interconnections between spaces. The characteristics of the emerging form, however, lie rather in the complexity how shifted spaces and parts are fitted together, than in a radical overall emergent geometry. Spatially as well as a structurally, the form moves from a simple modular repetitive system towards a more complex adaptive one, with interconnected parts which cannot stand alone but rather form an organic whole.
keywords	complex geometry, emergence, adaptive topology, voronoi diagram
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:25

_id	ecaade2007_177
id	ecaade2007_177
authors	Kaijima, Sawako; Michalatos, Panagiotis
year	2007
title	Discretization of Continuous Surfaces as a Design Concern
doi	https://doi.org/10.52842/conf.ecaade.2007.901
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 901-908
summary	The increasing trend in architecture to create unconventional forms opened up a new area of investigations in the employment of computational methods in design and construction. Our investigation is undertaken within a structural engineering firm, Adams Kara Taylor and focuses on finding ways to design structural solutions that respect criteria of efficiency, architectural intentions as well as intrinsic properties of the geometry. In this paper, we present various approaches on discretization where a project is presented as a continuous form, envelope or skin that must be subsequently subdivided in order to yield a framing or cladding solution compatible with different manufacturing, design and engineering considerations. The first part of this paper illustrates such a project where we applied and developed one of our discretization approaches. The second part of the paper focuses on generalization where we present a series of methodologies and corresponding software tools developed for the purpose.
keywords	Discretization, framing solution, structural analysis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	cf2007_557
id	cf2007_557
authors	Lai, Ih-Cheng
year	2007
title	Idea Hitchhiking in the Idea Association Process
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 557-570
summary	Idea association is an important behavior to generate diverse ideas during the conceptual design stage. In the idea association process, the designer links and generates related ideas in conjunction with other participants by idea hitchhiking. By looking for combinations, more novel and useful ideas are found. For understanding how ideas are hitchhiked and combined, we apply a computational tool called DIM and conduct a design experiment to approach this research. Through the analysis of the generated graph-like structure (called idea map), some observations are found and discussed in this paper.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ecaade2007_021
id	ecaade2007_021
authors	Mannan, Ashik Vaskor; Uddin, M. Saleh
year	2007
title	Natural Behavior and Computational Logic for Optimization of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2007.493
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 493-498
summary	In recent years much avant-garde architectural work has been dominated by a process based theoretical paradigm, inspired largely by various thinkers, critics, and philosophers. This particular ‘process practice’ attempts to address the paradox at the heart of contemporary production, by looking dialectically at the relationship between structure and ornament in nature with brainstorming and use of computer simulation. The goal of this paper is to develop a computer optimized system that can generate solutions for defining spaces involving a number of contextual relationships of activities. In particular, this research undertakes a pilot study (working team: Ashik Vaskor Mannan, Masrur Mamun Mithun, Lau Hon Yee Damien) on pattern and behavior in nature and implements the findings in to an architectural problem. The Initial Research focuses on Theory of emergence, Analysis of swarm behavior, and Analysis of ant system. Specific urban sites with different behavior patterns are chosen in Barcelona where this process is implemented to examine how they response to this course of action. This Bottom up method provides an optimum solution instead of a top down solution for an architectural problem
keywords	Design optimization, computational logic, natural behavior
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2017_265
id	ecaade2017_265
authors	Motalebi, Nasim and Duarte, José Pinto
year	2017
title	A Shape Grammar of Emotional Postures - An approach towards encoding the analogue qualities of bodily expressions of emotions
doi	https://doi.org/10.52842/conf.ecaade.2017.2.485
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 485-492
summary	This paper is concerned with the translation of analogue qualities of human emotions into digital readings. Human body postures are considered as one of the main behavioral conduits for non-verbal communication and emotional expressions (Shan et.al., 2007). This research is the first step towards identifying and detecting emotions through posture analysis of users moving through space; leading towards generating real time responses in the form of spatial configurations to users' emotions. Such spatial configurations would then help inhabitants reach certain emotional states that would enhance their life quality. In order to achieve this goal, we propose a methodology for developing a comprehensive shape grammar algorithm that could evaluate and predict bodily expressions of emotions. The importance of this study lies under the embodied interactions (Streech et.al., 2011) in space. As the circumfixed space impacts the embodied mind, the body impacts its surrounding including the architectural space.
keywords	Shape Grammar; Computation; Emotion; Posture; Interactive Architecture
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ijac20075405
id	ijac20075405
authors	Oxman, Neri
year	2007
title	Get Real Towards Performance-Driven Computational Geometry
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 663-684
summary	In historic design conventions geometry has traditionally promoted descriptive manifestations of form. Beyond the realm of geometry, the concept of performance which may inform such manifestations also carries important potential for design generation. This work explores the relation between geometry and performance from a computational-geometry perspective. It does so by revisiting certain analytical tools offered in most of today's 3-D modelers which support the evaluation of any generated surface geometry specifically curvature and draft angle analysis. It is demonstrated that these tools can be reconstructed with added functionality assigning 3-D geometrical features informed by structural and environmental performance respectively. In the examples illustrated surface thickness (as a function of structural performance) is assigned to curvature values, and transparency (as a function of light performance) is assigned to light analysis values. In a broader scope this work promotes a methodology of performance-informed form generation by means of computational geometry. Vector and tensor math was exploited to reconstruct existing analytical tools adapted to function as design generators.
series	journal
email
last changed	2008/02/25 20:30

_id	caadria2007_309
id	caadria2007_309
authors	Schoch, Odilo
year	2007
title	The Categorisation of Data from Smart Buildings for a positive Sustainable Application
doi	https://doi.org/10.52842/conf.caadria.2007.x.h3i
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper describes an architecture oriented approach of a categorization of information in so called computer integrated buildings (CIB). It follows an approach which seeks for the suitability of information categorization in order to achieve an energetically sustainable operation of CIBs. The CIB and its environment may exist as physical objects or as a simulation. The underlying question of this paper is: how can data of high temporal and spatial density be made accessible within a CIB with the goal of quickly delivering the most suitable answers for a specifical application. The subtitle „Google™ in the House“ was chosen due to the achievable relation of a model with simple user interfaces, extendable pre-valuable data basis and high quality answers is being developed. The model’s foundation is the potential of any built context that it is very easy to position data in physical space by adding its position by Cartesian coordinates. This architectural way of pre-sorting data is defined as logical arranging. Further on, known mechanisms of information retrieving and mapping are added to the model. A preliminarily summary concludes that energetically sustainable operations are backed through means of computational categorization models.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia16_254
id	acadia16_254
authors	Sharmin, Shahida; Ahlquist, Sean
year	2016
title	Knit Architecture: Exploration of Hybrid Textile Composites Through the Activation of Integrated Material Behavior
doi	https://doi.org/10.52842/conf.acadia.2016.254
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 254-259
summary	The hybrid system in textile composites refers to the structural logic defined by Heino Engel, which describes a system that integrates multiple structural behaviors to achieve an equilibrium state (Engel 2007). This research explores a material system that can demonstrate a hybrid material behavior defined by the differentiated tensile and bending-active forces in a single, seamless knitted composite material. These behaviors were installed during the materialization phase and activated during the composite formation process. Here, the material formation involves two interdependent processes: 1) development of the knitted textile with integrated tensile and reinforced materials and 2) development of the composite by applying pre-stress and vacuuming the localized area with reinforcements in a consistent resin-based matrix. The flat bed industrial weft knitting machine has been utilized to develop the knitted textile component of the system with a controlled knit structure. This enables us to control the material types, densities, and cross sections with integrated multiple layers/ribs and thus, the performance of the textile at the scale of fiber structure. Both of these aspects were researched in parallel, using physical and computational methods informed and shaped by the potentials and constraints of each other. A series of studies has been utilized to develop small-scale prototypes that depict the potential of the hybrid textile composite as the generator of complex form and bending active structures. Ultimately, it indicates the possibilities of hybrid textile composite materials as self-structuring lightweight components that can perform as highly articulated and differentiated seamless architectural elements that are capable of transforming the perception of light, space, and touch.
keywords	form-finding, programmable materials, composite forming processes, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2007_049
id	caadria2007_049
authors	Singh, Vishal; John S. Gero
year	2007
title	Computational Modeling of Temporary Design Teams
doi	https://doi.org/10.52842/conf.caadria.2007.x.b6s
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper presents a framework for a computational model of temporary design teams (TDTs). The framework is based on the situated Function-Behaviour-Structure (FBS) ontology, which is used to describe the different aspects of a TDT. This paper demonstrates how TDTs can be represented and reasoned about in terms of the FBS variables. A situated social agent’s architecture is introduced. At the agent level the social attributes that are considered include agent’s motivation, threshold point, attitude and beliefs. This agent is built on the idea of constructive memory. Constructive memory gives the situated agent the ability to adapt to the changing environment, which in this case is the team structure, team goals, and the other agents. This allows the framework to be used for studying the social aspects of changing team structures and team composition, which are characteristic of TDTs and the changing work culture that are facilitated by improved communication and IT tools. This research aims to lay the computational foundation for a means of studying temporary design team behaviour.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20075404
id	ijac20075404
authors	Wierzbicki, Madalina N.; de Silva, Clarence W.
year	2007
title	Design Tools for Foldable Structures with Application of Fuzzy Logic
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 645-662
summary	Rigidly foldable shells offer tremendous potential for developing kinetic architectural structures. However, the added element of motion poses new design challenges. Initially, sketchy shell geometry is constructed to reflect the intended form. Further steps involve assuring an error free folding within a range that satisfies desired functional requirements. The kinematics of a parallel topology of the shell's geometry is difficult to express algorithmically what prevents from developing of automated adjustment tools based on computational methods. The geometry can be adjusted manually based on intuitive observations; however the process is tedious, time consuming and unpredictable. This paper develops automated adjustment tools based on the intuitive approach of a human designer. The study applies the fuzzy logic formalism as a computational interface between human approach and structured adjustments to the geometry. The advantages of fuzzy logic stem from its natural ability to represent human knowledge and effectiveness in reconciling ambiguities, uncertainties and redundancies that the intuitive human approach brings along. The development steps of fuzzy logic based algorithm are presented. Performed evaluation tests and the results are discussed.
series	journal
last changed	2008/02/25 20:30

_id	caadria2007_283
id	caadria2007_283
authors	Ambrose, Michael A.
year	2007
title	BIM and Integrated Practice as Provocateurs of Design Education
doi	https://doi.org/10.52842/conf.caadria.2007.x.l3j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Building Information Modeling (BIM) obfuscates the role of composition, scale and abstraction by displacing the primacy of abstract conventions of representation with a methodology based on simulation. BIM subverts, while simultaneously clarifying, the holistic relationships of the parts to the whole in the architectural design of form and space. Architectural design education has great opportunity and risk in how it comes to terms with re-conceptualizing design education pedagogy as the profession struggles to redefine the media and methods of architectural deliverables in the age of BIM. The paper examines the foundation issues proposed by Integrated Practice. The paper questions how BIM and modeled simulation of architectural assemblage might transcend current definitions of convention in design and construction representation. This paper explores how the academy might prepare students of architecture for a digital practice that focuses on the virtual building model and database management. BIM and Integrated Practice viewed as provocateurs of design education provide great potential for critical analysis of how architectural design is taught. The associated pedagogies are transforming the way in which architectural education engages issues of design and representation and creates opportunities to question the roles and rules of traditional conventions. The paper seeks to engage issues of design specificity and ambiguity related to the assets and liabilities of digital modeling as the primary means of design and representation that BIM represents.
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: