Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_006
id	ascaad2007_006
authors	Afify, H.M.N. and Z. A. Abd ElGhaffar
year	2007
title	Advanced Digital Manufacturing Techniques (CAM) in Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 67-80
summary	Building projects today are not only born out digitally, but they are also realized digitally through "file-to-factory" processes of computer aided manufacturing (CAM) and computer numerically controlled (CNC) technologies. It was the challenge of constructability that brought into question, what new instruments of practice are needed to take advantage of the opportunities opened up by the digital modes of production, instead of whether a particular form is buildable. In this case of building construction, architects could design with attention to innovative details, afforded by unique shapes and sizes, knowing that whatever they created on their computer screen could be fabricated digitally for an affordable price. The aims of the research are to discuss and analyze the digital manufacturing techniques (CAM) in architecture and its fabrication, production process. To understand how these technologies fit within a broader context of architectural practice. The research begins with defining, what is digital manufacturing in architecture, its potentials, components and influences in the contemporary architecture. Further more it discusses the digital fabrication, Two- dimensional cutting, subtractive fabrication, additive fabrication and formative fabrication. The assembly technique, building skin, new materials and mass- customization in digital manufacturing techniques (CAM). That will be a hand in analyzing several case studies.
keywords	Digital technology in architecture, Digital manufacturing, Formative fabrication, New materials, Fabrication machines and software.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_283
id	caadria2007_283
authors	Ambrose, Michael A.
year	2007
title	BIM and Integrated Practice as Provocateurs of Design Education
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.l3j
summary	Building Information Modeling (BIM) obfuscates the role of composition, scale and abstraction by displacing the primacy of abstract conventions of representation with a methodology based on simulation. BIM subverts, while simultaneously clarifying, the holistic relationships of the parts to the whole in the architectural design of form and space. Architectural design education has great opportunity and risk in how it comes to terms with re-conceptualizing design education pedagogy as the profession struggles to redefine the media and methods of architectural deliverables in the age of BIM. The paper examines the foundation issues proposed by Integrated Practice. The paper questions how BIM and modeled simulation of architectural assemblage might transcend current definitions of convention in design and construction representation. This paper explores how the academy might prepare students of architecture for a digital practice that focuses on the virtual building model and database management. BIM and Integrated Practice viewed as provocateurs of design education provide great potential for critical analysis of how architectural design is taught. The associated pedagogies are transforming the way in which architectural education engages issues of design and representation and creates opportunities to question the roles and rules of traditional conventions. The paper seeks to engage issues of design specificity and ambiguity related to the assets and liabilities of digital modeling as the primary means of design and representation that BIM represents.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2007_153
id	cf2007_153
authors	Benrós, Deborah; José P Duarte and Fernando Branco
year	2007
title	A System for Providing Customized Housing
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 153-166
summary	This paper describes a system for generating customized mass housing. The aim is to provide dwellings at an affordable cost with recourse to mass production and yet guarantee that they are tailored to their users. It combines two systems, a rule-based design system and a prefabricated building system. The integration of both systems is achieved through the development of a computer tool to assist designers in the various stages of the housing design process. This tool produces three kinds of outputs: three dimensional models, construction drawings, and a list of construction elements, including their cost and information for manufacturing.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2007_084
id	ecaade2007_084
authors	Cenani, Sehnaz; Cagdas, Gulen
year	2007
title	Representation of User Movements with Multi Agent Systems: Shopping Malls
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 559-565
doi	https://doi.org/10.52842/conf.ecaade.2007.559
summary	This study aims to analyze relationships of users and spatial configurations using agent-based simulation systems under certain circumstances in a virtual environment with agents that represent users of a shopping mall. Multi-agent simulation methods are used to study emergent behavior patterns. A computer model is generated to simulate user movements in a shopping mall. Today, it is feasible to simulate the movement patterns of human societies at catastrophes like fire and earthquake within the buildings. In this study, exposing the dynamics of user-space relationship will help both students in architectural design education and professionals in practice, to observe and solve design problems before the construction of malls.
keywords	Artificial intelligence, agents, agent-based simulation, shopping mall, user movements
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia07_104
id	acadia07_104
authors	Chen, Chien-Lin; Johnson, Brian R.
year	2007
title	DVIN: A Dual View Information Navigation System
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 104-109
doi	https://doi.org/10.52842/conf.acadia.2007.104
summary	Differences in the preferred modes of representation of architects and their clients create challenges to their collaboration in the design process. Traditional two-dimensional drawings such as plans, sections and elevations form the backbone of architectural representation, anchoring text labels to record relevant non-graphical information. Nominally geometric “slices” through the proposed building volume, these drawings employ abstractions and conventions unique to professional practice. In contrast, non-architects think about building configuration largely through experiential or photographic perspective. This challenge increases over the life of the project. Simple drawings, such as those used in schematic design, are easily understood by all parties. However, as the building design develops the architects encode more and more design detail through the drawing conventions of construction documents, inadvertently making this detail less and less accessible to non-architects. We present DVIN, a prototype system that uses coordinated plan and perspective views for navigation of building information models, linking the information to an individual’s spatial navigation skills rather than their document navigation skills. This web-based application was developed using Java and VRML. The prototype makes it easier for naive users to locate and query building information, whether they are a client, a facility manager, or possibly an emergency responder. * NOTE: two pages missing from the printed proceedings have been appended to the PDF version of this paper and numbered 'erratum page 1' and 'erratum page 2' *
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2007_136
id	ecaade2007_136
authors	Dohmen, Philipp; Rüdenauer, Kai
year	2007
title	Digital Chains in Modern Architecture
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 801-804
doi	https://doi.org/10.52842/conf.ecaade.2007.801
summary	The “digital chain” is a continuous digital organization process, from the draft right into the manufacturing. Now one of these chains is applied on a mountain shelter. The individual steps are programmed and connected by universal interfaces. The computer is used not as passive digital drawing board, but as self-dependent tool that exerts influence on. Rules, dependence and aims, are formulated by the architect the computer can optimize due to its computing power. The role of the architect shifts thereby from the form designer to the role of a process designer. The aesthetics of the results is exciting and unusually, organically and self-evident - it is however always the result of given parameters. One topic is the complexity. The constructional modeling of the computers is a substantial support and easement. With programming techniques and parameterized construction, a high degree of individualizing becomes possible. A further point is efficiency. Construction with individual units, which former on was just realizable with high time and cost, become economically in this manner today. Furthermore computer-controlled machines work with precision and a detailing, which would be by workmanship neither temporally nor technically obtainable.
keywords	Digital chain, mass customization, one of a kind production
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2007_231
id	ecaade2007_231
authors	Díaz, Joaquin
year	2007
title	Holistic Cost-Information Management in Building and Construction
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 533-539
doi	https://doi.org/10.52842/conf.ecaade.2007.533
summary	In the building and construction industry the need for a more holistic enterprise-overlapping information exchange is obvious. Especially the management of cost-information from the very beginning design-phase to the point of controlling and billing is a very important task. Co-operation between architects, construction companies, engineering consultants, and authorities using digital information exchange becomes a strategic success factor. Solutions which cover all stages of the value creation chain such as e-tendering, cost-estimation, cost-determination, and production must be anytime accessible and platform independent. While the basic conditions of IT-infrastructure (digital networks) are today fully sufficient, the compatibility between the systems and the information to be exchanged represent the largest problem. The main problem is in the range of different systems and various information domains. Transformations and adjustments of the exchanged information still cost nearly 40 % of design and engineering time. Efficient information exchanges require a universal exchange format, which makes the existing systems compatible. This paper describes the German approach for a holistic information exchange in the building and construction industry. Furthermore the new approach to integrate the German GAEB Standard and the Industrial Foundation Classes (IFC) and the possibilities that can be obtained out of this integration will be explained.
keywords	GAEB standard, e-tendering, cost-estimation and cost management, bidding and billing procedures, integration of cost and graphical information (BIM)
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2007_049
id	ecaade2007_049
authors	Gane, Victor; Haymaker, John
year	2007
title	Conceptual Design of High-rises with Parametric Methods
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 293-301
doi	https://doi.org/10.52842/conf.ecaade.2007.293
summary	This paper describes the use of parametric methods in generating conceptual designs of high-rise buildings. We first assess current conceptual design practice at a leading AE firm and illustrate the challenge of satisfying a complex set of requirements with the tools currently used by the AEC industry. Few design options are generally developed and analyzed; better design solutions are most likely being overlooked. Parametric tools can potentially help address this problem by allowing designers to formalize and generate solution spaces that can be explored. But few case studies exist to document the construction and impact of these models. We present such a case study. We describe the variables, constraints, components, and rules in the model. We discuss the costs and benefits, and conclude with recommendations for expanding the use of parametric methods.
keywords	Conceptual, rule-based, parametric design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2007_001
id	ascaad2007_001
authors	Germen, M.
year	2007
title	Virtual Architecture: Reconstructing Architecture Through Photography
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 1-16
summary	The concept of construction in architectural design process is a temporary action that exists for a while and transforms itself into another product; i.e. the final building to be inhabited. Construction site can be taken as a podium where a play-to-remain-incomplete is being staged. The incompleteness causes us to dream, due to the fact that a complete building loses its narrative potential as it informs us about all the necessary pieces that constitute the whole: There is no puzzle to solve... Construction in this sense is like a historical ruin; Paul Zucker asserts that "ruins have held for a long time a unique position in the visual, emotional, and literary imagery of man. They have fascinated artists, poets, scholars, and sightseers alike. Devastated by time or willful destruction, incomplete as they are, they represent a combination of man-made forms and of organic nature." Architectural photography has the potential of re-creating this puzzle back again in order to bring an alternative representation to architecture. The architectural photographer is sometimes offered the freedom of reinterpreting, reconstructing architecture in order to be able to present a novel virtual perception to the audience. The idea here is to get some spatial clues that can later be used in other architectural projects. I was personally invited to two different concept exhibits in which I was given the freedom of inventing a virtual architecture through photography. The concept text written for one of these exhibits goes as follows: “I went, saw, stopped, attempted to grasp and enter it, looked at construction process and workers with respect, tried to internalize, wanted to claim it for a while, dreamed of creating a microcosm out of the macrocosm I was in, shot and shot and shot and finally selected: The created world, though intended for all, was probably quite a personal illusion...” Virtual architecture is a term used for architecture specifically created in the computer environment and never used in the realm of architectural photography. People like Piranesi, Lebbeus Woods, M.C. Escher, Marcos Novak, etc. previously dreamed about architectures that could exist virtually on paper, screen, digital environments. This paper will try to prove that this practice of (re)designing architecture virtually can be transferred to one of the most important realms of visuality: Photography. Various digital processes like stitching multiple photos together and mirroring images in image editing software like Photoshop, allow this virtual architecture to take place in the computer environment. Following this, I propose to raise the term “snap architecture” to connect it to the frequently referred concept of “paper architecture.”
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	acadia07_066
id	acadia07_066
authors	Gün, Onur Yüce ; Wallin, Nicholas J.
year	2007
title	Composing the Bits of Surfaces in Architectural Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 66-73
doi	https://doi.org/10.52842/conf.acadia.2007.066
summary	Emergent design tools, with enhanced modeling and parametric manipulation capabilities, are encouraging the exploration of new geometric typologies in the field of architecture. Designers are not only finding more opportunities to work with geometries of higher complexities but are also becoming able to manipulate their designs with simple formulations. After a decade of familiarity with free form modeling tools, architects must now become more aware of the critical relationship between design and construction. When a design is performed without taking the constraints of construction into account the inefficient method of geometric post-rationalization becomes necessary. Thus, the knowledge of the rationale should be applied from the very beginning of the design processes, and digital models should be informed and controlled while being developed. This paper will present analytical strategies and methods for working with nonstandard geometries in a geometrically and parametrically controlled environment. Each method is supported with custom scripts which run in both parametric and non-parametric computer aided design (CAD) platforms. Each script and method is manipulated for the next project and the computational tools created build up a library of surface generation, manipulation, and subdivision tools. This library later becomes a source for office-wide use of surface manipulation.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade2007_009
id	ecaade2007_009
authors	Gün, Onur Yüce
year	2007
title	Composing the Bits of Surfaces in Architectural Practice
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 859-868
doi	https://doi.org/10.52842/conf.ecaade.2007.859
summary	Emergent design tools; with enhanced modeling and parametric manipulation capabilities are encouraging the exploration of new geometric typologies in the field of architecture. Designers are not only finding more opportunities to work with geometries of higher complexities but also becoming able to update their designs with simple formulations. After a decade of proximity with free form modeling tools, architects now have to become more aware of the critical relationship of design and construction. When the design is performed without taking the constraints of the construction the inefficient method of geometric post-rationalization unavoidably has to take place. So, the knowledge of the rationale should be applied from the very beginning of the design processes, and the digital models should be informed and controlled while being developed. This paper will present analytical strategies and methods developed for working with non-standard geometries in a geometrically and parametrically controlled environment. Each method is supported with custom scripts which run in both parametric and non-parametric computer aided design (CAD) platforms. Each script and method is manipulated for the next project over time and the computational tools created build up a library of surface generation, manipulation and subdivision tools.
keywords	Parametric, surface, construction, Generative Components, Rhino Script
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
doi	https://doi.org/10.52842/conf.acadia.2007.040
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
doi	https://doi.org/10.52842/conf.acadia.2011.372
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2007_018
id	ecaade2007_018
authors	Kocaturk, Tuba
year	2007
title	Collaborative Knowledge Construction in Digital Free-Form Design
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 735-742
doi	https://doi.org/10.52842/conf.ecaade.2007.735
summary	This paper focuses on the emerging domain of digital free-form design, and attempts to explicate its knowledge content and characteristics through a systematic inquiry of the digital free-form design practice. The massive amount of information associated with the design and construction demands of the complexly shaped buildings demand explicit knowledge about the way various information pieces relate to one another. This paper reports on the process of developing a knowledge framework which serves as a reference model to describe and explain the free-form design and production processes in terms of the interaction of contextual conditions and according to the different ways design problems are perceived and formulated by the members of the design teams. The framework provides guidelines for the development of a web-based design decision support system to support collaborative knowledge construction, sharing and reuse in the domain.
keywords	Digital free-form design, knowledge construction, knowledge framework
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2007_005
id	ascaad2007_005
authors	Loh, E.; N. Dawood and J. Dean
year	2007
title	Integration of 3D Tool with Environmental Impact Assessment (3D EIA)
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 51-66
summary	Environmental Impact Assessment (EIA) tools have been available for some years now and their function is predominantly to predict and identify the environmental impact of building projects. However EIA analysis is often done after the completion of the project or building and when it is too late to influence the design, materials or components to be used. Also, more than 80% of the design decisions that influence the whole life cycle of a building are made at the initial design phase. EIA does not receive the required attention. A new approach is suggested in this research to ensure that designers, clients and stakeholders have all of the relevant information needed at the outline design stage for the assessment of cost and environmental impact. The idea is that building owners and users will have the opportunity to minimise their operating costs from ‘cradle to cradle’. As energy resources reduce over the next few decades, the value of this research will increase and it is possible to foresee government legislation which drives building construction in this direction. By making environmental impact analysis readily linked to 3D products at the very early stage of the design process, the value of 3D technology will be enhanced significantly resulting in more use of the technology in the construction process. In this context, the objective of this paper is to introduce and explore approaches for developing integrated 3D- EIA, LCA (Life Cycle Analysis) and LCCA (Life Cycle Cost Analysis) and VR (Virtual Reality) tools and develop trade-off analysis to assist in the decision making process. To demonstrate initial results, a pilot case study in the UK is being developed.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ascaad2007_049
id	ascaad2007_049
authors	Mokbel, H.; G. Salazar, M. Aboulezz and J. Tocci
year	2007
title	Choosing Levels of Granularity in Building Information Modeling: Contractor’s Perspective
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 623-634
summary	Over the last two years, there has been an increased interest across the Architectural /Engineering/ Construction (A/E/C) professionals in the potential adoption of the Building Information Modeling. Professional Associations such as the American Institute of Architects (AIA), the Associated General Contractors (AGC) and the Design-Build Institute of America (DBIA) are dedicating specific resources to better understand the implications of the use of this concept in their professional activities. However, not much ground has been gained yet in finding practical ways to choose the level of granularity (LOG) or detail that is needed to develop the digital model in a cost effective fashion. Choosing the Level of Granularity (LOG) of the digital model or level of detail development that goes into the model is a key decision that results from careful consideration of many factors. It is a very complex and iterative process that requires a critical assessment of the cost of adding details to the digital model versus the benefits derived from its intended purpose whether the model will be used to enhance the communication process or to support the construction management functions performed by the firm. This paper presents two case studies in which the authors have been directly involved in making the decision on the LOG of the digital model. The first case involves the Togar Suites, Union Station project in New Jersey while the second case refers to the Worcester Trail Courthouse in Worcester Massachusetts. In both cases, the 3D models were developed primarily for visualization of the construction sequence. However, in the case of the Togar Suites the contractor also needed the model for trade coordination and clash detection purposes.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2007_331
id	cf2007_331
authors	Moum, Anita; Tore Haugen and Christian Koch
year	2007
title	Stretching the Trousers Too Far? Convening societal and ICT development in the architectural and engineering practice
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 331-344
summary	The publicly and privately funded national R&D program ‘Digital Construction’ was initiated in 2003 in order to establish a common platform for interchanging digital information and to stimulate digital integration in the Danish building industry. This paper explores the relation between visions, strategies and tools formulated in the ‘Digital Construction’ program, and the first experiences made from implementing the 3D work method part of the program in an ongoing building project. The discussions in the paper are placed in the complex field between choosing strategies for integrating information and communication technologies on national level, and the effects of these strategies on real life building projects.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	acadia23_v1_174
id	acadia23_v1_174
authors	Nejur, Andrei
year	2023
title	NoeudAL Pavilion: Ultralight folded nodes for bespoke geometries
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 174-179.
summary	This research project, conducted at the University of Montreal School of Architecture, presents an innovative approach to the construction of reticulated structures, focusing on the development and application of a novel, ultralight aluminum node. The node, constructed from a folded, laser-cut, 1-mm aluminum sheet, is designed to accommodate wooden linear members with varied rectangular sections, making it adaptable to bespoke geometries and low valence nodes. This innovative design offers a solution to the long-standing challenge in the construction industry of balancing cost, customization, and weight for reticulated structures through novel node designs (Abdelwahab and Tsavdaridis 2019; Dyvik et al. 2023; Chilton 2007; Rochas 2014; Hassani et al. 2020).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

For more results click below: