Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 69

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2007_af47
id	sigradi2007_af47
authors	Vinageras, Alberto
year	2007
title	In the Circus: Construction of Image and City [En el circo: Construcción de imagen y ciudad]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 439-443
summary	The circus has a format that is repeated in the city. The city is a spectacle, it is the result of a carnival. All we perceive and see is held by a set of segments that allow this scheme to work. The tent that covers the circus is everyday life. Manipulation starts in a showcase. Images are juggled. There is a script that supports contents. Image is a very ancient sacrifice. An enchantment takes place in memory. The crowd is a filter. Its arrival is disappearance.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	bsct_ahmeti
id	bsct_ahmeti
authors	Ahmeti, Flamur
year	2007
title	Efficiency of Lightweight Structural Forms: The Case of Treelike Structures - A comparative Structural Analysis
source	Vienna University of Technology; Building Science & Technology
summary	This work addresses the structural efficiency of lightweight tree-like structures for three case studies: Stuttgart Airport, Beaverton Library, and Thermal Bad Oeyenhausen. The case studies are simulated using Build simulation software, to determine the stresses induced in each structure. The material efficiency and shapes areexplored in terms of load bearing structures. Hybrids of the above structures are formed to compare the pattern morphology used by various types of tree-like structure and assess the structural behavior. In addition, (steel, wood and concrete) materials are compared to determine which would have better structural performance. In order to show the resemblance between the growing trees and the tree-like structures, an example of both cases is simulated and stresses evaluated. Results show that, in general, the minimum stress and deformations are obtained for steel. Structures made out of this material also exhibit higher load bearing capability, optimum stability factors and the best geometric efficiency, inspite of higher specific weight (10 times wood, and 3 times concrete).
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ascaad2007_017
id	ascaad2007_017
authors	Alamgir, S.; A. Khan and K. Alamgir
year	2007
title	Computer Aided Environmental Solutions: Evaluation of Optimum Building Orientation in Lahore, Pakistan
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 213-214
summary	One of the primary features of solar passive design is the orientation of a building on a particular latitude. The client of Information Technology demands testing, validity, practicality and sustainability of a building project before execution. The computer based simulations are the only practical way to predict the complex energy performance and analysis for a large number of passive design solutions. This paper investigates the optimum residential building orientation having various zones, located in Lahore, Pakistan, with the help of Energy Simulation program. It is concluded that with the help of software, it is possible to orient the residential plan with the minimum solar gain of the required living zones.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_283
id	caadria2007_283
authors	Ambrose, Michael A.
year	2007
title	BIM and Integrated Practice as Provocateurs of Design Education
doi	https://doi.org/10.52842/conf.caadria.2007.x.l3j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Building Information Modeling (BIM) obfuscates the role of composition, scale and abstraction by displacing the primacy of abstract conventions of representation with a methodology based on simulation. BIM subverts, while simultaneously clarifying, the holistic relationships of the parts to the whole in the architectural design of form and space. Architectural design education has great opportunity and risk in how it comes to terms with re-conceptualizing design education pedagogy as the profession struggles to redefine the media and methods of architectural deliverables in the age of BIM. The paper examines the foundation issues proposed by Integrated Practice. The paper questions how BIM and modeled simulation of architectural assemblage might transcend current definitions of convention in design and construction representation. This paper explores how the academy might prepare students of architecture for a digital practice that focuses on the virtual building model and database management. BIM and Integrated Practice viewed as provocateurs of design education provide great potential for critical analysis of how architectural design is taught. The associated pedagogies are transforming the way in which architectural education engages issues of design and representation and creates opportunities to question the roles and rules of traditional conventions. The paper seeks to engage issues of design specificity and ambiguity related to the assets and liabilities of digital modeling as the primary means of design and representation that BIM represents.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ecaade2007_088
id	ecaade2007_088
authors	Bechthold, Martin
year	2007
title	Teaching Technology: CAD/CAM, Parametric Design and Interactivity
doi	https://doi.org/10.52842/conf.ecaade.2007.767
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 767-775
summary	The paper discusses a project-based approach to technology teaching, and examines the case of the mobile information unit (MIU) for Harvard University and its art museums. A student competition was held to explore design alternatives for this unit. The winning entry proposed an interactive, pixilated fiber-optics display as well as touch screens. Parametric digital modeling was used in the design and design development of the scheme. Research included the study of structural alternatives, fabrication methods and the modes of interaction between users and the MIU.
keywords	Computer-aided design and manufacturing, fabrication, simulation, prototype, fiber optics
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2007_af87
id	sigradi2007_af87
authors	Borda Almeida da Silva, Adriane Borda; Janice de Freitas Pires; Elisabeth da Rosa Conill; Neusa Rodrigues Félix
year	2007
title	Technological language x scientific language: Structuring educational speeches for the area of digital graphics [Lenguaje tecnológico vs. lenguaje científico: Estructurando discursos educacionales para la gráfica digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 141-145
summary	This work looks to contribute to the structuring of educational speeches able to promote the use of the virtual space like laboratory for the simulation of the phenomenon of interaction between light and matter in different levels of similarity with the reality. The computer resources available for that present a technological specific language, mixing proceedings heuristics and physical. This demands of the students a detailed control of parameters, which need to be recognized and associated to the scientific knowledge. You being adopted “concept maps”, like strategy of attendance of processes of teaching / apprenticeship, these associations are set out, supplying sufficient elements to prepare, to revise and to enlarge the speeches open to question.
keywords	Concept Maps; Structures of Knowledge; Educational Speeches; Digital Graphics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2007_af73
id	sigradi2007_af73
authors	Bruscato, Underlea; Rodrigo Garcia Alvarado
year	2007
title	Spaces for Meetings and Memories in Virtual Networks [Espaços de Encontro e Memória nas Redes]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 380-384
summary	Digital media is becoming a huge space for information and communication, including heritage simulation. Meantime urban spaces are deteriorating and loosing social role. This paper shows development of heritage models like social spaces in internet to promote urban memory and meetings. A model of old square and theatre of the abandonee town of Sewell in Chile, diffused through youtube, and the model of Square of Inmigration in Sao Leopoldo, Brasil, available in virtual communities in internet with links to fotolog pages of families. These examples demonstrated relationship between technological possibilities and urban spaces that can support social cohesion.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2007_af81
id	sigradi2007_af81
authors	Cattani, Airton; Asdrubal Antoniazzi; Jaqueline Viel Caberlon Pedone; Ana Elisia Costa; Paulo Vasconcelos Hayet
year	2007
title	Study of computer modeling tools in historical environmental research [Comparação entre ferramentas de modelagem computacional em pesquisa sobre ambientes históricos]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 332-335
summary	Computer simulation is an important learning tool for architecture, both for assessing projects and for investigating historical data. This study presents the initial results from research into computer simulation of historic spaces using computer modeling tools. The results discuss the viability of this kind of resource in studies of historical heritage, while at the same time consolidating learning procedures in virtual environments.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaade2007_084
id	ecaade2007_084
authors	Cenani, Sehnaz; Cagdas, Gulen
year	2007
title	Representation of User Movements with Multi Agent Systems: Shopping Malls
doi	https://doi.org/10.52842/conf.ecaade.2007.559
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 559-565
summary	This study aims to analyze relationships of users and spatial configurations using agent-based simulation systems under certain circumstances in a virtual environment with agents that represent users of a shopping mall. Multi-agent simulation methods are used to study emergent behavior patterns. A computer model is generated to simulate user movements in a shopping mall. Today, it is feasible to simulate the movement patterns of human societies at catastrophes like fire and earthquake within the buildings. In this study, exposing the dynamics of user-space relationship will help both students in architectural design education and professionals in practice, to observe and solve design problems before the construction of malls.
keywords	Artificial intelligence, agents, agent-based simulation, shopping mall, user movements
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2007_689
id	caadria2007_689
authors	Chung, Daniel Hii Jun
year	2007
title	Best Practice for Achieving Real-Time Virtual Reality Architectural Visualization
doi	https://doi.org/10.52842/conf.caadria.2007.x.i4m
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Real-time rendering is the most fundamental aspect of the virtual reality technology, which is always, a balance between hardware advancement and efficient software algorithm upgrades on the one hand and the demands of the quality output on the other. As architects who utilize this technology, what we can do as users is to optimize the parameters we can control in the files we input to run the simulation. Thus the identification of the few variables we can control to prevent a lagging performance or ghosting which is no longer realtime. The frame rate above all is the measurement to determine whether a simulation is real-time or not. The research aim is to identify the biggest contributing factors among the few identified. The intention is to save time and effort by optimizing the selected factors in projects so that we do not have to optimize all of them. The workflow will also be a lot faster and projects can be done efficiently. The final part is to run satisfaction tests among users to evaluate those biggest contributing factors and the qualities acceptable by users. This is to eliminate the added processing power needed to run bigger files if they do not contribute much to improved quality.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	b92c
id	b92c
authors	Derix, Christian
year	2012
title	Digital Masterplanning: Computing Urban Design
source	In Urban Design and Planning: Institution of Civil Engineers, Thomas Telford Publishers, ahead-of-print
summary	The digital revolution has finally reached urban design as one of the last design communities not very familiar with computing. This is despite the city and geography being the natural fields for systems analogy and digital models of mathematical and statistical simulation were developed in the 60s and 70s for urban planning, much before industrial or architectural design. The recent arrival of urban design simulations is however not as innovative and radical as their 50 year old counterparts since they use computing solely for policy visualization, quantity evaluation or pattern generation. The Computational Design and Research Group [CDR] at Aedas\|R&D started in 2007 to develop an open platform of lightweight applications – Digital Masterplanning – in collaboration with partners from academia and industry to provide methods for urban design, based on computational methods called meta-heuristic algorithms. An attempt to encode empirical knowledge and design assumptions into simulations is described where designers can assemble the resulting applications according to scales and brief into custom workflows.
keywords	Spatial Planning, Urban Design, Meta-Heuristic Algorithms, Computational Design
series	journal paper
type	normal paper
email
more	http://www.icevirtuallibrary.com/content/article/10.1680/udap.9.00041
last changed	2012/09/20 17:41

_id	sigradi2007_af79
id	sigradi2007_af79
authors	Dimitrios Christakou, Evangelos; Neander Furtado Silva
year	2007
title	Virtual Environments in simulation inside buildings [Ambientes virtuais na simulação do interior do edifício]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 253-256
summary	Architects have always wanted to visually simulate internal space before beginning construction. Visualizations through the use of synthetics images, static scenes or animations, are a powerful tool which can contribute to understanding and therefore improve architectural proposals for better environment comfort, and energy efficiency. Real time interactive visualization of changes proposed by the architect during the design is a valuable resource, particularly during the initial phases. However, this type of real-time interactive visualization requires considerable computing power, which places restraints and reduces interactivity.
keywords	Daylight; Real-time interactive visualization; architectural design
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2007_af107
id	sigradi2007_af107
authors	Espina, Jane; Francisco Rincón
year	2007
title	Simulation as an urban planification tool: Plaza Baralt [Simulación como herramienta de planificación urbana: Plaza Baralt]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 364-369
summary	Pedestrian simulation tools are usually used to evaluate pedestrians’ evacuation/security in buildings (closed environments). The paper’s objective is to develop a methodology for the application of these tools in urban planning (open spaces), where the pedestrian behavior is more complex. The area studied is Plaza Baralt, in Maracaibo Venezuela, an area enclosed by historic buildings. The proposed scenarios and pedestrian flow simulations – based in cellular automata – followed a locally adapted data recollection and site analysis. As a result the methodology allows the designer to analyze various scenarios, fast and efficiently, identifying problems of areas, flow, land use and user profiles.
keywords	Pedestrian flow simulation; land use; urban planning; scenery
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	caadria2007_543
id	caadria2007_543
authors	Fang, Lixin; Qi zhou
year	2007
title	Digital Tectonics in the Shape Finding of Spatial Structures
doi	https://doi.org/10.52842/conf.caadria.2007.x.c9f
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Spatial structures should be designed to acquire appropriate forms so that they can correctly function to the earthquake loading or the wind pressure as well as the dead loading through their load carrying capabilities. The paper probes deeply into the fundamental principle of digital simulation with structures’ mechanic/material tectonics in architecture design and explore its capability for shape-finding in various structure systems through full-size virtual model experiments.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20075206
id	ijac20075206
authors	Foni, Alessandro E.; Papagiannakis, George; Cadi-Yazli, Nedjma; Magnenat-Thalmann, Nadia
year	2007
title	Time-Dependant Illumination and Animation of Virtual Hagia-Sophia
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 284-301
summary	This paper presents a case study centered on the virtual restitution and virtual life simulation of a highly complex and endangered heritage edifice: the church of Hagia Sophia, in Istanbul, Turkey. The goal of this article is to describe the techniques used in order to achieve a real time rendering and animation of the selected space and its characters, as well as to point out the challenges and solutions that such a work implies at different stages in production. Most of these issues are focused on the reconstruction of the architecture of the site; however, in order to achieve an accurate simulation, the social aspect is not to be omitted. The importance of a heritage site resides as well in the historical characters and the social interactions that were taking place there: this information allows a better understanding of the function and the importance of the selected site in connection with the cultural aspects of the life at a certain time. In order to strengthen the feeling of immersion in a heritage edifice virtually restituted, it is important to recreate virtual life and describe the timely evolutionary aspects of the edifice as well.
series	journal
last changed	2007/08/29 16:23

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	caadria2007_127
id	caadria2007_127
authors	Gu, Ning; L.F. Gül, M.L. Maher
year	2007
title	Designing within the Design: A Pedagogical Case Study of 3D Virtual Worlds in Design Education
doi	https://doi.org/10.52842/conf.caadria.2007.x.o1v
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Within most architecture and design schools, 3D virtual worlds are traditionally perceived and used as a CAAD tool for modelling and collaboration. Building on the understanding of virtual worlds as the extension of our physical environments where people can inhabit and participate in a variety of activities, we teach designing virtual worlds as a design subject which considers 3D virtual worlds as a different kind of environment design other than a technical tool for supporting design simulation and collaboration. This paper reports on our teaching experience, as well as discusses the principles for designing and teaching in 3D virtual worlds.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2012_167
id	sigradi2012_167
authors	Gutiérrez, Nicolás Sáez
year	2012
title	Ejercicio de arte fotográfico. Reconstrucción de una vivencia espacial a través de una percepción inmersiva de la imagen (Fotografía) - escena (Arquitectura) [A photographic art exercise. Reconstruction of a spatial experience through an immersive perception of image (photography) - scene (architecture)]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 373-377
summary	This work constitutes one of the main lines of visual exploration derived from the photographic work done by the author. As an architect that makes and investigates photography, his exercises of art study the translations from visual perception of architectonic space to its photographic simulation, work that so far has only been done and exhibited in large format. The work here presented is based on projects undertaken from 2007 to 2010 and mainly elaborates on a recent project to be soon exhibited in Concepción between January and March 2013.
keywords	Fotografía de autor; percepción visual; inmersión virtual; espacio de exhibición; realidad aumentada
series	SIGRADI
email
last changed	2016/03/10 09:53

For more results click below: