Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 239

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2007_026
id	ascaad2007_026
authors	Sarji, E.A.; A. Rafi and R. Mat Rani
year	2007
title	Preparing a multimedia-based gallery for institute of higher learning: A case study of Malaysian experience
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 305-316
summary	While the majority of medium and small sized institutions still rely on their physical or traditional content, it has been observed a pre-disposition usually by major, recently founded or contemporary art institutions to display net-based projects (Buiani, 2001) and to some extent established as a permanent display. This changing of exhibitions has penetrated in many Asian galleries and as a result many schools trying to re-position and present in such a way that it can be easily changed and adapted to host multimedia, Internet, interactive and computer-based content. This funded research project investigates the functions of gallery in IHL in Malaysia. A triangulated study was conducted to understand the potentials and issues faced by galleries in public and private universities focusing on design schools that include art and design, and architecture. This research starts with the understanding of gallery design theories. It is then followed by a qualitative method survey to all galleries in the IHL. This research continues with an in depth study and a survey on Electronic Gallery (e-Gallery), Faculty of Creative Multimedia (FCM), Multimedia University (MMU) to understand between the theories and design ideas. A set of questionnaires was developed based on Mathews (1991) and Stewart’s (2002) principles and guidelines on research methods and distributed to visitors throughout a period of time consisting of open-ended, close-ended, Likert Summated Rating Scale and Multiple-choice. This involved a controlled group of visitors comprises students and staff of the faculty. The results of these studies will be used as a reference to further conduct a wider scope of galleries worldwide towards designing a multimedia-based gallery framework for Institute of Higher Learning.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ijac20075208
id	ijac20075208
authors	White, Martin; Petridis, Panagiotis; Liarokapis, Fotis; Plecinckx, Daniel
year	2007
title	Multimodal Mixed Reality Interfaces for Visualizing Digital Heritage
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 322-337
summary	We have developed several digital heritage interfaces that utilize Web3D, virtual and augmented reality technologies for visualizing digital heritage in an interactive manner through the use of several different input devices. We propose in this paper an integration of these technologies to provide a novel multimodal mixed reality interface that facilitates the implementation of more interesting digital heritage exhibitions. With such exhibitions participants can switch dynamically between virtual web-based environments to indoor augmented reality environments as well as make use of various multimodal interaction techniques to better explore heritage information in the virtual museum. The museum visitor can potentially experience their digital heritage in the physical sense in the museum, then explore further through the web, visualize this heritage in the round (3D on the web), take that 3D artifact into the augmented reality domain (the real world) and explore it further using various multimodal interfaces.
series	journal
last changed	2007/08/29 16:23

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2007_060
id	ascaad2007_060
authors	Gillispie, D. and C. Calderon
year	2007
title	A framework towards designing responsive public information systems
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 767-782
summary	"Evolving effective responsive systems, and creating a credible interface between the work and the user, requires an awareness of many different types of user, contexts and functions as well as the phenomenological aspects of social and environmental conditions." (Bullivant, 2006). Responsive design and interactive architecture operates at the intersection of Architecture, Arts, Technology, Media Arts, HCI and Interaction Design in a physical context suggesting ways in which the existing physical environments can be augmented and extended adding a greater level of depth, meaning and engagement with the world around us. Through a series of case studies, this paper explores a number of principles which may be applied to the design of responsive environments of which public information systems form part. Divided into three main sections, the paper first explains how responsive environments have addressed the application of public information systems, secondly, through a series of case studies, precedents are highlighted which lead to development of principles for developing designs for responsive environments. The third section discusses and elaborates on these principles which have been developed based upon our own interpretations and grouping of precedents and approaches towards interaction design. This paper contributes towards the field of responsive environments and interactive architecture through an analysis of case studies to infer a framework from which responsive environments may be created and developed.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_639
id	caadria2007_639
authors	Jinuntuya, Pinyo; Jirayod Theppipit
year	2007
title	Temporary Housing Design and Planning Software for Disaster Relief Decision Support System
doi	https://doi.org/10.52842/conf.caadria.2007.x.k9q
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	There is a continuous and urgent need for disaster relief in Thailand and countries suffering from floods and tsunami impact. Based on this issue, design and planning software for temporary housing project has been developed, as well as the process and guideline for implementation. This paper describes a unique coupling of interactive 3D virtual environment with parametric designing in order to manage disaster relief project more efficiently. Architects and planners can use the functionality of software on both design simulation and project evaluation aspects. We need to provide correct information to help people making decision when they are in disaster. So the disaster relief decision support system must offer proper information of crisis management focused on people, place, and process. One of the main features of software is the relationship modeling of essential factors such as number of people, houses, budget, time, and space. This automatic temporary houses generation and space planning is simulated for land use and layout plan design with cost estimation analysis. The system components were proposed to a new disaster relief system in alternative approach. Using community-based development will not cost budget but required people participation. Our software’s space coordination will start and centered from available space in school or temple with sufficient infrastructure. After essential factors are inputted, appropriated number of temporary houses, public facilities, and management guideline will be generated to support further planning decision. Our core system was developed on Java and Swing Technology, empowered by real-time 3D rendering CAD engine. In addition, “Virtools” as our Authoring Tools was applied to improve design interaction and explore rapid software prototyping. At the end, we discuss the comparison between real situations in Thailand and appropriate design standardization, which should be reconsidered how to manage crisis with the limitation of time and budget from government.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	lasg_whitepapers_2019_133
id	lasg_whitepapers_2019_133
authors	Ji, Haru Hyunkyung; and Graham Wakefield
year	2019
title	Selected Artificial Natures, 2017-2018
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.133 - 142
summary	Artificial Nature is a research-creation collaboration co-founded by Haru Hyunkyung Ji and Graham Wakefield in 2007. It has led to a decade of immersive installations in which the invitation is to become part of an alien ecosystem rich in feedback networks.1 Here we present four recent works in this series between 2017 and 2018.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	ijac20075205
id	ijac20075205
authors	Moustakas, Konstantinos; Tzovaras, Dimitrios; Nikolakis, Georgios
year	2007
title	Simulating the Use of Ancient Technology Works Using Advanced Virtual Reality Technologies
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 256-282
summary	This paper introduces a novel framework for the modeling and interactive simulation of ancient Greek technology works with the use of advanced virtual reality technologies. A novel algorithm is introduced for the realistic and efficient resolution of collisions that is based on an advanced collision detection approach that can also calculate in real-time the force that should be fed back to the user using a haptic device. Thus, the user is capable of manipulating the scene objects in the environment using haptic devices to simulate the sense of touch and stereoscopic imaging so as to be immersed in the virtual environment. Moreover, the virtual hand that simulates the user's hand is modeled using superquadrics so as to further increase the speed of the simulation and the fidelity of the force feedback. Extended evaluation of the system has been performed with visitors of the Science Center and Technology Museum of Thessaloniki.
series	journal
last changed	2007/08/29 16:23

_id	ascaad2007_058
id	ascaad2007_058
authors	Abdelhameed, W. and Y. Kobayashi
year	2007
title	Developing a New Approach of Computer Use ‘KISS Modeling’ for Design-Ideas Alternatives of Form Massing: A framework for three-Dimensional Shape Recognition in Initial Design Phases
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 745-756
summary	This research aims at developing a new approach called ‘KISS Modeling’. KISS is generally a rule of ‘Keep It Simple, Stupid’ that will be applied in modeling process investigated and presented by the research. The new approach is implemented in a computer program ‘KISS Modeling’ that generates three dimensional forms based on simplifying the concept of shape recognition in design. The research, however, does not employ totally concepts of shape recognition or shape understanding in Artificial Intelligence and psychology. The research, in summary, investigates and describes: 1) a new approach of computer use contributing to generating design-ideas alternatives of form massing in initial design phases, within a simple way that any designer can understand at single glance, 2) implementation of shape recognition for generative three dimensional forms, 3) function to generate different outputs from different recognition, and 4) case studies introduced through applications and functions of the three dimensional modeling system presented by the research. The research concluded that the introduced processes help the user improve the management of conceptual designing through facilitating a discourse of his/her modeling of design-ideas massing.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ascaad2007_001
id	ascaad2007_001
authors	Germen, M.
year	2007
title	Virtual Architecture: Reconstructing Architecture Through Photography
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 1-16
summary	The concept of construction in architectural design process is a temporary action that exists for a while and transforms itself into another product; i.e. the final building to be inhabited. Construction site can be taken as a podium where a play-to-remain-incomplete is being staged. The incompleteness causes us to dream, due to the fact that a complete building loses its narrative potential as it informs us about all the necessary pieces that constitute the whole: There is no puzzle to solve... Construction in this sense is like a historical ruin; Paul Zucker asserts that "ruins have held for a long time a unique position in the visual, emotional, and literary imagery of man. They have fascinated artists, poets, scholars, and sightseers alike. Devastated by time or willful destruction, incomplete as they are, they represent a combination of man-made forms and of organic nature." Architectural photography has the potential of re-creating this puzzle back again in order to bring an alternative representation to architecture. The architectural photographer is sometimes offered the freedom of reinterpreting, reconstructing architecture in order to be able to present a novel virtual perception to the audience. The idea here is to get some spatial clues that can later be used in other architectural projects. I was personally invited to two different concept exhibits in which I was given the freedom of inventing a virtual architecture through photography. The concept text written for one of these exhibits goes as follows: “I went, saw, stopped, attempted to grasp and enter it, looked at construction process and workers with respect, tried to internalize, wanted to claim it for a while, dreamed of creating a microcosm out of the macrocosm I was in, shot and shot and shot and finally selected: The created world, though intended for all, was probably quite a personal illusion...” Virtual architecture is a term used for architecture specifically created in the computer environment and never used in the realm of architectural photography. People like Piranesi, Lebbeus Woods, M.C. Escher, Marcos Novak, etc. previously dreamed about architectures that could exist virtually on paper, screen, digital environments. This paper will try to prove that this practice of (re)designing architecture virtually can be transferred to one of the most important realms of visuality: Photography. Various digital processes like stitching multiple photos together and mirroring images in image editing software like Photoshop, allow this virtual architecture to take place in the computer environment. Following this, I propose to raise the term “snap architecture” to connect it to the frequently referred concept of “paper architecture.”
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_127
id	caadria2007_127
authors	Gu, Ning; L.F. Gül, M.L. Maher
year	2007
title	Designing within the Design: A Pedagogical Case Study of 3D Virtual Worlds in Design Education
doi	https://doi.org/10.52842/conf.caadria.2007.x.o1v
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Within most architecture and design schools, 3D virtual worlds are traditionally perceived and used as a CAAD tool for modelling and collaboration. Building on the understanding of virtual worlds as the extension of our physical environments where people can inhabit and participate in a variety of activities, we teach designing virtual worlds as a design subject which considers 3D virtual worlds as a different kind of environment design other than a technical tool for supporting design simulation and collaboration. This paper reports on our teaching experience, as well as discusses the principles for designing and teaching in 3D virtual worlds.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
doi	https://doi.org/10.52842/conf.acadia.2011.372
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2007_173
id	ecaade2007_173
authors	Matcha, Heike
year	2007
title	Parametric Possibilities: Designing with Parametric Modelling
doi	https://doi.org/10.52842/conf.ecaade.2007.849
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 849-856
summary	We describe several projects in our ongoing research and teaching activities in the field of parametric design. The work is based on the premise that using parametric modelling and customized mass production for designing, planning and realisation, the creation of a spatially rich and varied architecture which is specific for individual programs, users and contexts is being made possible. We demonstrate this design approach by explaining three different design methodologies of various projects. The specifics and the experience of the use of various CAD software tools will be described: scriptable CAD programs like VectorWorks and CAD software with integrated parametric modelling like Unigraphics.
keywords	Parametric design, generative design, mass customisation, CAAD curriculum, digital aids to design creativity
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2007_063
id	ecaade2007_063
authors	Petzold, Frank; Bimber, Oliver; Tonn, Christian
year	2007
title	CAVE without CAVE
doi	https://doi.org/10.52842/conf.ecaade.2007.161
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 161-168
summary	Activities in the building industry in Germany concentrate increasingly on a combination of renovation and new-build. A look at current computer aided applications reveals a serious lack of IT support for the whole architectural design process in and within existing buildings (e.g. building surveying, designing on site and the preparation of information for further use in later planning stages). An ongoing interdisciplinary research project undertaken jointly by the faculty of media and the faculty of architecture is investigating methods and techniques for the computer-aided support of the design process in and within existing buildings. The goal is to develop a hardware and software concept for a “design-toolbox” based on SAR (spatial augmented reality) and to implement aspects of this as prototypes. This paper describes the goals of the “Spatial Augmented Reality for Architecture” project and discusses possible fields of application for SAR for supporting the design process in existing buildings from a user’s perspective. This paper presents the initial results of the project, the development of a cave-like hardware and software concept called “low-cost projection in room corners” and the description of the core concept based on a client-server architecture. The project is funded by the “German Research Foundation (DFG)”.
keywords	Augmented reality, virtual reality, design support, renovation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ascaad2007_024
id	ascaad2007_024
authors	Schneider, S.; C. Tonn, F. Petzold and D. Donath
year	2007
title	Designing with images: Augmented reality supported on-site Trompe l’oeil
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 275-290
summary	Activities in the building industry in Germany concentrate increasingly on a combination of renovation and new-build. A look at current computer aided applications reveals a serious lack of IT support for the whole architectural design process with and within existing buildings (e.g. building surveying, designing on site and the preparation of information for further use in later planning stages). An ongoing interdisciplinary research project undertaken jointly by the faculty of media and the faculty of architecture is investigating methods and techniques for the computer-aided support of the design process with and within existing buildings. The goal is to develop a hardware and software concept for a “design-toolbox” based on SAR (spatial augmented reality) and to implement aspects of it as prototypes. The paper focuses on one aspect of the research project – designing with images in an AR-Environment. The paper presents an overview of the project, a description of the core model based on a client-server architecture, the historical / theoretical architectural background and first results of this research part. The project is funded by the “German Research Foundation (DFG)”.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2007_387
id	cf2007_387
authors	Smith, Greg; Ning Gu and Mary Lou Maher
year	2007
title	Designing Virtual Worlds for 3D Electronic Institutions
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 387-400
summary	3D Electronic Institutions (3DEI) are 3D virtual worlds that are dynamically designed in response to the users’ needs and the rules of an electronic institution. Electronic institutions can be modelled as multi-agent systems inspired by analogous physical institutions. This paper describes coupling of a multi-user 3D virtual world to an electronic institution. The resulting 3DEI is a distributed and heterogeneous multi-agent system that provides the advantages of both with the organizational structures imposed by the electronic institutions and the spatial characteristics provided by 3D virtual worlds.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ascaad2007_050
id	ascaad2007_050
authors	Techel, F., K. Nassar
year	2007
title	Teaching Building Information Modeling (BIM) from a Sustainabilty Design Perspective
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 635-650
summary	Building Information Modeling has recently gained significant attention both in academia and practice. BIM presents immense opportunities for increased efficiencies, coordination and quality of architectural design. One of the reasons that BIM offers a more comprehensive design approach is the fact that all aspect of the building are considered during the modeling phase. Rather than drawing the building using lines and circles actual object are used to model the building, which results in a more comprehensive underlying database model of the entire edifice being designed. The approach obviously has tremendous benefits in terms of coordination and systems integration, as well as, project control and management during the design and construction phases. Nevertheless BIM offers its own unique challenges vis-à-vis its introduction to students of architecture. The students in Architecture programs are usually introduced to BIM in two ways, either through a specialized course in CAD or via a shadow introduction in design studios and related courses. Careful positioning of the course within the architecture curriculum is crucial in order to gain maximum benefit in the synthesis of other course content. The reason being that students of architecture in earlier years of the design curriculum may not yet have developed the ability to synthesize and coordinate multiple systems required for complete BIM. This is an important consideration the design and pedagogy of introducing BIM to Architecture students. This paper argues for a new approach in teaching BIM for Architecture students. Instead of designing a course specifically for BIM/CAAD we present a paradigm whereas BIM can be presented within a larger more rigorous context. The experience of teaching BIM within a sustainable design framework is presented in this paper. Issues relating to the design of basic residential buildings were integrated into the course presenting BIM. A simplified set of design rules and guidelines under banner of sustainability were taught to the students in pre-defined doses and sequence throughout the course. The careful placement of these concepts permitted for BIM to be introduced in a more interesting and comprehensive manner than in the traditional CAD-course setting. Samples of student work are presented and critiqued in order to come up with recommendations and guidelines for incorporating BIM into a comprehensive and comprehensible course. The pedagogical advantages of and disadvantages of the approach are discussed within the paper, as well as, a detailed description of the course content and structure. Results from and outcome-based assessment of the objectives of the course are also illuminated which provided suggestions for future offerings of the course.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_041
id	ascaad2007_041
authors	Tolba, O.
year	2007
title	The Role of GIS in Documenting Bahrain’s Historic Cities
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 517-526
summary	Geographic information systems have long been established as useful tools for urban planning. The aim of this study is to put forward applications of GIS (Geographic Information Systems) to urban conservation in cities with architectural heritage. The study presents a specific database design to be integrated within a GIS, and the methodology of gathering data for such a database. This study concerns Bahrain’s architectural heritage, which includes many significant historic buildings as well as an overall traditional character of Bahrain’s old towns. This heritage is endangered due to extensive new urban development and the general neglect over the past decades. The study also describes an experimental database that is implemented for documenting the urban character of the old towns of Manama and Muharraq. This database was tested during a partial visual survey of Manama. It is hoped that this database will be the nucleus of a long-term process of urban conservation in the Kingdom of Bahrain. The work described here is part of a larger study conducted by the UNDP (United Nations Development Program) and the municipal government in Bahrain. A group of international experts in urban planning, urban design, and historic preservation also presented their own specific recommendations. The author of this paper was responsible for designing the GIS that helps in documenting the historic cities of Bahrain. This report proposes the development of a geographic information system for urban conservation planning. The system supports planning specialists and decision makers in their areas of work, such as the creation of urban conservation zones and redevelopment strategies. The system documents existing structures and their present conditions in order to assist in decisions regarding their preservation, restoration, and possible reuse. Such a system will also help the municipalities in regular heritage management tasks.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_215
id	ecaade2007_215
authors	Boytscheff, Constantin; Sfeir, Marilu Kanacri
year	2007
title	Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
doi	https://doi.org/10.52842/conf.ecaade.2007.091
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
summary	The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords	Urban planning, virtual reality, immersive, teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2007_057
id	ascaad2007_057
authors	Menges, A.
year	2007
title	Computational Morphogenesis: Integral Form Generation and Materialization Processes
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 725-744
summary	Natural morphogenesis, the process of evolutionary development and growth, derives polymorphic systems that obtain their complex form, organisation and versatility from the interaction of system intrinsic material capacities and external environmental influences and forces. One striking aspect of natural morphogenesis is that formation and materialisation processes are always inherently and inseparably related. In stark contrast to these integral development processes of material form, architecture as a material practice is mainly based on design approaches that are characterised by a hierarchical relationship that prioritises the definition and generation of form over its subsequent materialisation. This paper will present an alternative approach to design that entails unfolding morphological complexity and performative capacity without differentiating between form generation and materialisation processes. Based on an understanding of material systems not as derivatives of standardized building systems and elements but rather as generative drivers in the design process this approach seeks to develop and employ computational techniques and digital fabrication technologies to unfold innate material capacity and specific latent gestalt. Extending the concept of material systems by embedding their material characteristics, geometric behaviour, manufacturing constraints and assembly logics within integral computational models promotes an understanding of form, material and structure not as separate elements, but rather as complex interrelations in polymorphic systems resulting from the response to varied input and environmental influences and derived through the logics and constraints of advanced manufacturing processes. These processes will be explained along 8 research projects.
series	ASCAAD
email
last changed	2008/01/21 22:00

For more results click below: