Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 23

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2007_056
id	ecaade2007_056
authors	Spaeth, A. Benjamin; Schwägerl, Klaus; Stamm, Isolde
year	2007
title	Parameters in the Design Process
doi	https://doi.org/10.52842/conf.ecaade.2007.869
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 869-877
summary	“Ce n’est point le navire qui naît de la forge des clous et du sciage des planches. C’est la forge des clous et du sciage des planches qui naissent de la pente vers la mer et croissance du navire” (Saint-Exupéry, 1948). The paper describes and analyses a course held at Stuttgart University, Germany dealing with the application of parameters in an architectural design process and the transformation of this process into a relational digital model. The course is introduced with special emphasis on its tasks, aims and the implicit didactic concept. It is also investigated if and how a design approach resulting from the identification and determination of parameters can lead to a creation of a unique shape. Finally the impact of the practical exercises for the final design is evaluated. The course’s structure is enhanced by the “Vorklasse” from Bauhaus and the conviction that using software is taught most effectively by working on an own specific project. At the very beginning the students get the chance to gain experiences with parameters through preliminary practical exercises, like folding and modelling and analysing. Then the use of the software is taught in several compact sessions in parallel to the design process. The impact of the early practical exercises on the subsequent design process is remarkable. Special attention is therefore given to this aspect. The aim of the lessons is to produce a proposal for the design task. The proposal is then to be presented as a parametric model representing either the global shape or a constructive detail.
keywords	Design education, digital project, parametrical design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2007_191
id	ecaade2007_191
authors	Cardoso, Daniel; Michaud, Dennis; Sass, Lawrence
year	2007
title	Soft Façade: Steps into the Definition of a Responsive ETFE Façade for High-rise Buildings
doi	https://doi.org/10.52842/conf.ecaade.2007.567
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 567-573
summary	Façade systems are to a great extent responsible for both the energy-performance and overall aesthetic qualities of a building. The study presented in this paper explores the tectonic integration of a distributed computer network and the façade of a high-rise tower through the use of ETFE cushions, exploiting the soft nature of this material to embed a sensor network to provide touch-responsive changes of opacity in the façade, potentially improving the energy-efficiency of a building, and promoting a novel kind of dialogue between a space and its inhabitants. We propose that the inclusion of computer networks and displays in the built environment necessarily leads to new design philosophies that solve tectonically the dialogue between traditional materials and technological devices, and we put forward the first results of a research into a novel implementation of electrochromic ‘smart’ cushions that allows for changing opacities of the façade elements of a building in response to human touch.
keywords	Responsiveness: smart windows, interactive architecture, tangible interfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_030
id	ecaade2007_030
authors	Colakoglu, Birgul
year	2007
title	Design by Grammar:
doi	https://doi.org/10.52842/conf.ecaade.2007.919
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 919-925
summary	The use of shape grammars in the context of architectural design project has not been widely explored. This paper describes hybrid analysis/original design applications of grammars in conjunction with student design projects and the issues in creating hybrid grammars that respond to a specific context.
keywords	Computational design methods, shape grammars, hybrid grammars, precedent base design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2007_221
id	ecaade2007_221
authors	Kaga, Atsuko ; Miyagawa, Atsushi ; Fukuda, Tomohiro
year	2007
title	Construction of a Participatory Community Space Design System
doi	https://doi.org/10.52842/conf.ecaade.2007.099
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 99-106
summary	Residents’ active participation is necessary for a feasible community design from the planning stage to maintenance and management. it is necessary to show information related to a plan efficiently to facilitate understanding, and to consider a plan in a limited time. The purpose of this study is to develop a Community Space Design system (CSDS) that can use GIS data and Real-time simulation, in order to support comprehension of 3D area information during continuous development. Using CSDS, participants were able to treat various GIS data fixed, and a subject called the division and the disaster prevention of a community, which the object ground is holding can be understood visually on the same 3D space as real space. Because their solution was found, the design was accepted quickly.
keywords	Environmental design, virtual reality, real-time simulation, GIS
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2007_295
id	caadria2007_295
authors	Kaga, Atsuko; Hahm Joohyung
year	2007
title	Construction of the Dynamic Environmental Knowledge Web for a Sustainable Environmental Design
doi	https://doi.org/10.52842/conf.caadria.2007.x.d4d
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research considered position information and described the construction of an environmental knowledge website of the dynamic user participation type that can collect and send information, and that allows discussion about ecology, the environment, and sustainability. By perusing the distribution of the knowledge using position information on a 2D map and a 3D virtual space, an environmental knowledge website which can grasp spatial distribution was built.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2007_045
id	cf2007_045
authors	Kaga, Atsuko; Masahiro Kawaguchi and Tomohiro Fukuda
year	2007
title	Simulation of an Historic Building Using a Tablet MR System
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 45-58
summary	To depict characteristics of historical buildings, digital archives must display visual information about structures and their construction. This study defines the components used for three-dimensional (3D) models of framework construction. Framework construction has heretofore portrayed structures through animation using VHS or Hi-Vision video. This paper describes a method to facilitate exhibition through interactive simulation using animation and real-time images. Furthermore, a Tablet MR can be used as an effective simulation tool for studying historical buildings in on-site models. For education about historical wooden-framework architecture, increased interactive potential according to users’ needs will be increasingly necessary.
series	CAAD Futures
email
last changed	2008/10/28 07:19

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	sigradi2007_af49
id	sigradi2007_af49
authors	Kotsopoulos, Sotirios D.
year	2007
title	Bridging the gap between design intuition and computation [Reduciendo la diferencia entre el Diseño Intuitivo y la Computacion]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 295-299
summary	The paper examines the process of articulation and development of design concepts from a computational standpoint. The context of the research is the architectural studio and specifically the process of designing from scratch. The scope of the research is educational. Shape grammar formalism is used in the paper, to show how the concept of “porosity” was used by architect Steven Holl and his team in designing the 350-unit student residence Simmons Hall at MIT.
keywords	Production; interpretation; shape algebra; rule schema
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade2007_028
id	ecaade2007_028
authors	Narahara, Taro
year	2007
title	The Space Re-Actor
doi	https://doi.org/10.52842/conf.ecaade.2007.195
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 195-202
summary	This paper proposes a computational method for visualizing animated human reactions to physical conditions that are described in a synthetic architectural model. Its goal is to add a sense of place to the geometry, and augment the representation of its spatial quality for designers and audience. Spatial qualities in architectural design cannot be fully evaluated solely by observing geometrical constructs without reference to inhabitants placed inside. However, imagining what happens to those inhabitants and appreciating their movement is difficult even for trained architects. The proposed method introduces a walking scale figure in a geometric model. Through agent-based computation, it moves inside the model and displays various behaviors in reaction to spatial characteristics such as transparent surface, opaque surface, perforation and furniture. This method lays a foundation for developing a new kind of software that overcomes the shortcomings of current design tools.
keywords	Architectural visualization, agent-based computation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia07_182
id	acadia07_182
authors	Oxman, Neri
year	2007
title	Rapid Craft: Material Experiments towards an Integrated Sensing Skin System
doi	https://doi.org/10.52842/conf.acadia.2007.182
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 182-191
summary	The distinction between matter (mechanics) and information (electronics) in the context of responsive building skins has promoted unique design protocols for integrating sensor technologies into material components. Such a distinction results in applications of remote sensing after the process of material fabrication. Sensors are commonly perceived as electronic patches which initiate mechanical output with response to electrical input. This work seeks to establish a novel approach to the application of electronics in building skins, which prioritizes material selection, behavior, and fabrication technology in relation to the required task, over postproduction sensor integration. The term “Rapid Craft” is proposed to describe such design protocols which couple material behavior and fabrication in the design of responsive skins. Rapid Craft is a designation for the incorporation of craft materialization knowledge within the framework of CNC processes of fabrication. A light-sensing inflatable skin system is developed as a working prototype, which demonstrates such an approach.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	ecaade2007_086
id	ecaade2007_086
authors	Oxman, Neri
year	2007
title	FAB Finding
doi	https://doi.org/10.52842/conf.ecaade.2007.785
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 785-792
summary	The distinction between material behavior (mechanics) and material response (electronics) in the framework of responsive building skins has promoted unique design protocols for integrating sensor technologies into material components. Such a distinction results in the implementation of remote sensing devices post the process of material fabrication. Sensors are commonly perceived as electronic add-on patches which initiate mechanical output with response to electrical input. This work seeks to establish a novel approach to the integration of electronics in building skins which prioritizes material selection, behavior and fabrication given a required task, over post-production sensor application. The term “FAB Finding” is proposed to describe an instrumental methodology facilitating the coupling of CNC fabrication processes with material organization and behavior. It offers a design mentality which emphasizes the nature and the effects brought about by the use of specific fabrication processes which are by definition inherent in the design product and its behavior. A light-sensing inflatable skin system is developed as a working prototype demonstrating such an approach.
keywords	Digital fabrication, material behavior, form-finding, sensors, responsive skin
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ijac20075405
id	ijac20075405
authors	Oxman, Neri
year	2007
title	Get Real Towards Performance-Driven Computational Geometry
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 663-684
summary	In historic design conventions geometry has traditionally promoted descriptive manifestations of form. Beyond the realm of geometry, the concept of performance which may inform such manifestations also carries important potential for design generation. This work explores the relation between geometry and performance from a computational-geometry perspective. It does so by revisiting certain analytical tools offered in most of today's 3-D modelers which support the evaluation of any generated surface geometry specifically curvature and draft angle analysis. It is demonstrated that these tools can be reconstructed with added functionality assigning 3-D geometrical features informed by structural and environmental performance respectively. In the examples illustrated surface thickness (as a function of structural performance) is assigned to curvature values, and transparency (as a function of light performance) is assigned to light analysis values. In a broader scope this work promotes a methodology of performance-informed form generation by means of computational geometry. Vector and tensor math was exploited to reconstruct existing analytical tools adapted to function as design generators.
series	journal
email
last changed	2008/02/25 20:30

_id	caadria2007_005
id	caadria2007_005
authors	Oxman, Neri; Jesse L. Rosenberg
year	2007
title	Material Based Design Computation
doi	https://doi.org/10.52842/conf.caadria.2007.x.d2j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	The paper unfolds the association between geometry and material behaviour, specifically the elastic properties of resin impregnated latex membranes, by means of homogenizing protocols which translate physical properties into geometrical functions. Resinimpregnation patterns are applied to 2D pre-stretched form-active tension systems to induce 3D curvature upon release. This method enables form-finding based on material properties, organization and behaviour. A digital tool developed in the Processing environment demonstrates the simulation of material behaviour and its prediction under specific environmental conditions. Finally, conclusions are drawn from the physical and digital explorations which redefine generative material-based design computation, supporting a synergetic approach to design integrating form, material and environment.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20075102
id	ijac20075102
authors	Oxman, Neri; Rosenberg, Jesse Louis
year	2007
title	Material-based Design Computation: An Inquiry into Digital Simulation of Physical Material Properties as Design Generators
source	International Journal of Architectural Computing vol. 5 - no. 1, pp. 26-44
summary	The paper demonstrates the association between geometry and material behavior, specifically the elastic properties of resin impregnated latex membranes, by means of homogenizing protocols which translate physical properties into geometrical functions. Resin-impregnation patterns are applied to 2-D pre-stretched form-active tension systems to induce 3-D curvature upon release. This method enables form-finding based on material properties, organization and behavior. Some theoretical foundations for material-computation are outlined. A digital tool developed in the Processing (JAVA coded) environment demonstrates the simulation of material behavior and its prediction under specific environmental conditions. Finally, conclusions are drawn from the physical and digital explorations which redefine generative material-based design computation, supporting a synergetic approach to design integrating form, structure, material and environment.
series	journal
email
last changed	2007/06/14 12:11

_id	ecaade2007_171
id	ecaade2007_171
authors	Sass, Lawrence; Michaud, Dennis; Cardoso, Daniel
year	2007
title	Materializing a Design with Plywood
doi	https://doi.org/10.52842/conf.ecaade.2007.629
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 629-636
summary	This paper is presentation of resulting physical models that were used to explore the relationship between design modeling in CAD and digital fabrication with plywood sheets. We explored a process in making tabletop models with digital fabrication machines and thin plywood sheets. Each was built from combination of predetermined wood joining techniques and structures. These models are believed work as simulation of full scale constructs that inform CAD modeling. Results illustrate the limited potential of parametric modeling and inform fabrication and assembly of design variations.
keywords	Digital Fabrication, CAD modeling
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2007_029
id	ecaade2007_029
authors	Terzidis, Kostas; Jungclaus, Jan
year	2007
title	Predicting the Future: Open Source CAAD?
doi	https://doi.org/10.52842/conf.ecaade.2007.815
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 815-819
summary	This paper will present a prototype open source CAD system developed recently by a join effort among Harvard, CMU, and MIT. The system is composed of an expandable user interface, a data structure that supports 2D and 3D objects, image processing capabilities, animation, network communication (TCP/IP), serial interface, and file processing modules that can be expanded. The idea was to develop seed modules that can interact with one another in order to be modified, expanded, or new ones added. The language used is Processing and the setup is made to be implemented in an open source format (i.e. GNU and Google Code). The system is an open source universal architectural CAD system that will hopefully serve as the software standard for education and practice.
keywords	Open source, digital design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ascaad2007_041
id	ascaad2007_041
authors	Tolba, O.
year	2007
title	The Role of GIS in Documenting Bahrain’s Historic Cities
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 517-526
summary	Geographic information systems have long been established as useful tools for urban planning. The aim of this study is to put forward applications of GIS (Geographic Information Systems) to urban conservation in cities with architectural heritage. The study presents a specific database design to be integrated within a GIS, and the methodology of gathering data for such a database. This study concerns Bahrain’s architectural heritage, which includes many significant historic buildings as well as an overall traditional character of Bahrain’s old towns. This heritage is endangered due to extensive new urban development and the general neglect over the past decades. The study also describes an experimental database that is implemented for documenting the urban character of the old towns of Manama and Muharraq. This database was tested during a partial visual survey of Manama. It is hoped that this database will be the nucleus of a long-term process of urban conservation in the Kingdom of Bahrain. The work described here is part of a larger study conducted by the UNDP (United Nations Development Program) and the municipal government in Bahrain. A group of international experts in urban planning, urban design, and historic preservation also presented their own specific recommendations. The author of this paper was responsible for designing the GIS that helps in documenting the historic cities of Bahrain. This report proposes the development of a geographic information system for urban conservation planning. The system supports planning specialists and decision makers in their areas of work, such as the creation of urban conservation zones and redevelopment strategies. The system documents existing structures and their present conditions in order to assist in decisions regarding their preservation, restoration, and possible reuse. Such a system will also help the municipalities in regular heritage management tasks.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_027
id	ascaad2007_027
authors	Villalon, R. and J. Lobel
year	2007
title	Materializing Design: contemporary issues in the use of cad/cam technology in the architectural design and fabrication process
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 317-326
summary	While the ability to produce and quantify design and fabrication information has been greatly enhanced by advances in CAD/CAM technology over the last several decades, a practical link between what can be modelled virtually and what can be built physically has yet to be realized. The process of parsing complex design information and translating it into a format that can be utilized by those responsible for its fabrication is a many-stepped process, in some cases made increasingly difficult by the same technology intended to simplify the process. The use of CAD/CAM technology in the architectural design process requires ongoing consideration as its use becomes increasingly pervasive in the design process. Within the context of contemporary architectural practice and discourse, what is the degree of fidelity between design information and fabrication information? How are advances in accessibility to, and the capability of CAD/CAM technologies affecting the role of the architect in the overall building process? Does CAD/CAM offer unique and undiscovered possibilities to re-associate the designer with the builder, or simply a process of more efficiently automating the design and construction process? Our work builds upon issues of the fundamental differences that CAD/CAM technologies introduce to design practices; issues that were raised at the very outset of CAD/CAM’s introduction to architectural design. Employing parametric design software, we design and construct a speculative façade system for a high-rise tower which is then fabricated at a reduced-scale with various two-axis CAM technology. We use relational and constraint-based logics in order to create models of parametric assemblies of discrete components which are translated into machine-ready formats, fabricated and re-assembled, in a process modelled on that typically followed in the construction of a real building project.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_345
id	caadria2007_345
authors	Villalon, Rachelle
year	2007
title	Dynamic Changes in DNA to Dynamic Architecture (with NiTi Shape Memory Alloy)
doi	https://doi.org/10.52842/conf.caadria.2007.x.i2i
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research presents a design process that implements digital methodologies from design concept to the fabrication of smallscale prototypes. The prototypes themselves are user interactive objects employing Nickel Titanium Shape Memory Alloy. At a larger context, this research not only responds to material and fabrication constraints, but addresses the user-to-building interaction; instead of users interacting with a building, the building can now interact with its user by way of transforming its spatial configuration.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2007_115
id	cf2007_115
authors	Whiting, Emily; Jonathan Battat and Seth Teller
year	2007
title	Topology of Urban Environments: Graph construction from multi-building floor plan data
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 115-128
summary	This paper introduces a practical approach to constructing a hybrid 3D metrical–topological model of a university campus or other extended urban region from labeled 2D floor plan geometry. An exhaustive classification of adjacency types is provided for a typical infrastructure, including roads, walkways, green-space, and detailed indoor spaces. We extend traditional lineal techniques to 2D open spaces, incorporating changes in elevation. We demonstrate our technique on a dataset of approximately 160 buildings, 800 floors, and 44,000 spaces spanning indoor and outdoor areas. Finally, we describe MITquest, a web application that generates efficient walking routes.
series	CAAD Futures
email
last changed	2007/07/06 12:47

For more results click below: