Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 555

Reformat results as: short short into frame detailed detailed into frame

_id	cf2007_461
id	cf2007_461
authors	Moloney, Jules
year	2007
title	A Framework for the Design of Kinetic Façades
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 461-474
summary	The particular requirements of kinetic façades are discussed in relation to a general model for future CAAD research – a 3D digital prototype based on (1) the concurrent evaluation of quantitative and qualitative performance over time (2) the calibration of geometry and physics to materiality and mechanics. Concurrent performance in the case of kinetic façades is determined by the dual role as environmental screens and the socio-cultural function as the public face of architecture. From these principles a framework is proposed that informs the conceptualisation of software that will address unique requirements - the design of façades as process systems that perform over a range of time scales.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	sigradi2007_af77
id	sigradi2007_af77
authors	Amorim Côrtes, Marta; Arivaldo Leão de Amorim
year	2007
title	Digital Photogrammetric Restitution of the Pelourinho’s Façades, in Salvador - Bahia, Brazil [Restituição fotogramétrica digital das fachadas do pelourinho, Salvador – Bahia, Brasil]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 375-379
summary	Brazil has so many historical cities with important architectural heritage. Some of them are remains of the colonial times and aggregate beautiful buildings such as, palaces, public buildings and churches in baroque style, legacy of the Portuguese colonization. Despite of its cultural value, most of these building sets are under several kinds of threats. This paper discusses about the experience on digital photogrammetric restitution of the building façades of Pelourinho, a neighborhood in the historical center of Salvador, the capital city of the State of Bahia. The architectural documentation is an important way to preserve and safeguard its memory, besides being an effective educational process about the meaning of preservation and cultural heritage.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2007_027
id	ascaad2007_027
authors	Villalon, R. and J. Lobel
year	2007
title	Materializing Design: contemporary issues in the use of cad/cam technology in the architectural design and fabrication process
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 317-326
summary	While the ability to produce and quantify design and fabrication information has been greatly enhanced by advances in CAD/CAM technology over the last several decades, a practical link between what can be modelled virtually and what can be built physically has yet to be realized. The process of parsing complex design information and translating it into a format that can be utilized by those responsible for its fabrication is a many-stepped process, in some cases made increasingly difficult by the same technology intended to simplify the process. The use of CAD/CAM technology in the architectural design process requires ongoing consideration as its use becomes increasingly pervasive in the design process. Within the context of contemporary architectural practice and discourse, what is the degree of fidelity between design information and fabrication information? How are advances in accessibility to, and the capability of CAD/CAM technologies affecting the role of the architect in the overall building process? Does CAD/CAM offer unique and undiscovered possibilities to re-associate the designer with the builder, or simply a process of more efficiently automating the design and construction process? Our work builds upon issues of the fundamental differences that CAD/CAM technologies introduce to design practices; issues that were raised at the very outset of CAD/CAM’s introduction to architectural design. Employing parametric design software, we design and construct a speculative façade system for a high-rise tower which is then fabricated at a reduced-scale with various two-axis CAM technology. We use relational and constraint-based logics in order to create models of parametric assemblies of discrete components which are translated into machine-ready formats, fabricated and re-assembled, in a process modelled on that typically followed in the construction of a real building project.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2007_052
id	ascaad2007_052
authors	Hamza, N. and M. Horne
year	2007
title	Building Information Modelling: Empowering Energy Conscious Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 661-670
summary	The increasing awareness of climate change and carbon dioxide emissions from the built environment is resulting in the need to visualize the environmental performance of buildings. One of the recent drivers in the UK has been the tightening of building regulations relating to energy consumption in buildings, mandating all buildings to be performance evaluated by accredited environmental simulation tools to test their carbon dioxide emission against set targets. Currently there is major confusion on all levels from architects to building control officers and contractors on how to engrain energy consciousness principles in the design and construction of buildings. Within this context, ‘Building Information Modelling’ that is linked to ‘Building Performance Modelling’ is increasingly being looked upon as a tool to facilitate the communication between the design team and contractors and to provide a transparent information model on the specification and targeted energy consumption of all new/ refurbished buildings to all parties involved. In this paper, analysis of the benefits and drawbacks of current efforts to combine those two comprehensive databases will be investigated. A sample of main software development companies, architects and contractors, using semi-structured interviews is undertaken to find out how Building Integrated Modelling (BIM) and Building Performance Modelling (BPM) can support the design and construction teams to deliver energy conscious buildings.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_675
id	caadria2007_675
authors	Huang, Joseph Chuen-Huei
year	2007
title	Decision Support System for Modular Houses
doi	https://doi.org/10.52842/conf.caadria.2007.x.x9q
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Presently, only a small percentage of people in the world typically hire an architect to design and build a home which is tailored to their preference. Besides the architect’s fee, clients also need to wait an interminable time for design and construction. Factory-made prefabricated housing systems tried to solve this problem previously. However, most pioneers failed to address the issues of variability and individual needs (Kieran & Timberlake, 2004). Plants closed because they produced more than the market demand, and prefabricated housing provided less flexibility than the traditional stick-built housing. The advanced digital technology makes it possible to communicate design ideas and concepts to others more effectively. The project delivery process leads itself to customization, embodying principles of lean production (Pine, 1993), flexible computer-integrated design interaction with clients, and reduced cycle times; all effecting rapid response between consumers and producers.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
doi	https://doi.org/10.52842/conf.acadia.2011.372
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ascaad2007_055
id	ascaad2007_055
authors	Mallasi, Z.
year	2007
title	Applying generative modeling procedure to explore architectural forms
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 697-712
summary	Computer generated 3D forms using generative procedures have matured in the last decade and now considered as a tangible approach for realizing architectural design ideas. As fascinating as the approach might be, it is still lacking actual application in the early architectural design process. There are many reasons for this, among them: it has many implications over the architectural design process mainly the practicality of design during the conceptual design stage; it is cumbersome to develop construction drawings for complex architectural forms; and the necessity for producing conceptual designs quickly in less time as design requirements and decisions are constantly being changed. This paper initially reports on a practical development of a computer program which generates architectural massing designs based on integrating forms generation technique in a design scheme. The influence for this development was inspired by Spirolaterals technique used in generating complex 3D architectural forms that are based on parametric shape configuration. The development has three goals: to review the principles for constructing generative forms in the conceptual design stage using simple CAD tools, to assist in the production of design schemes based on a few basic shapes and rules, and to explore 3D forms finding and generation without the need to write a complicated computer program that are difficult to produce by hand. The development resulted in generating an interesting number of 3D compositions. The author applied this technique to experiment during the production of a design scheme. The paper hence describes the current development of ArchiGen tool to produces generative 3D forms utilizing ArchiCAD © GDL programming language. The tool is embedded within ArchiCAD for generating 3D shapes. One of the main features of this implementation is that users are able to sketch 2D shapes and the tool will deform its three dimensional generation. Moreover, the user being able to abstract the architectural character from the resulting complex 3D shapes. This development extends current related work by allowing the designer to load shapes into ArchiGen which acts as vocabulary of shapes for a design scheme constraints. It is intended from this work to inspire future work focusing on using generative tools in the early conceptual design stages.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2016_393
id	sigradi2016_393
authors	Muniz, Leonardo Oliveira; Marino, Tiago Badre; Silva, Jorge Xavier da
year	2016
title	Geoinclus?o: Sistemas de Informaç?o Geográfica e Crowdthinking [Geoinclusion: Geographical Information Systems and Crowdthinking]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.471-475
summary	This article aims to disseminate the concept of "geoinclusion" for the iberoamerican scientific community. This concept was created in 2007 by the ‘GIS Laboratory’ of the Federal University of Rio de Janeiro (Brazil) to operationalize the "crowdthinking" through Geographic Information Systems (specially the web and mobile versions). Ever since, it was tested by educational, health, safety and environment sectors and the result was the creation and continuous improvement of the web plataform VICON.SAGA. The paper will demonstrate its four fundamental principles of knowledge construction: decentralization, authenticity, integration and resilience.
keywords	Geoinclusion; Geographical Information Systems; Crowdthinking
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaade2007_191
id	ecaade2007_191
authors	Cardoso, Daniel; Michaud, Dennis; Sass, Lawrence
year	2007
title	Soft Façade: Steps into the Definition of a Responsive ETFE Façade for High-rise Buildings
doi	https://doi.org/10.52842/conf.ecaade.2007.567
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 567-573
summary	Façade systems are to a great extent responsible for both the energy-performance and overall aesthetic qualities of a building. The study presented in this paper explores the tectonic integration of a distributed computer network and the façade of a high-rise tower through the use of ETFE cushions, exploiting the soft nature of this material to embed a sensor network to provide touch-responsive changes of opacity in the façade, potentially improving the energy-efficiency of a building, and promoting a novel kind of dialogue between a space and its inhabitants. We propose that the inclusion of computer networks and displays in the built environment necessarily leads to new design philosophies that solve tectonically the dialogue between traditional materials and technological devices, and we put forward the first results of a research into a novel implementation of electrochromic ‘smart’ cushions that allows for changing opacities of the façade elements of a building in response to human touch.
keywords	Responsiveness: smart windows, interactive architecture, tangible interfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_213
id	ecaade2007_213
authors	Correia, José; Romão, Luís
year	2007
title	Extended Perspective System
doi	https://doi.org/10.52842/conf.ecaade.2007.185
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 185-192
summary	This paper presents a new system of graphical representation, which has been given a provisional name: Extended Perspective System - EPS. It results from a systemic approach to the issue of perspective, sustained by several years of academic research and pedagogical experience with architecture students. The EPS aims to be a global and unified perspective system, gathering the current autonomous perspective systems and turning them into particular states of a broader conceptual framework. Through the use of in-built specific operations, which become particularly effective in a computational environment, the EPS creates and contains an unlimited set of in-between new states, which can also be considered legitimate and particular perspective systems. Considerations of its potential role in architectural descriptive drawing are discussed.
keywords	Linear perspective, curvilinear perspective, graphical representation, conceptual drawing, visual perception
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2007_217
id	ecaade2007_217
authors	Duarte, José
year	2007
title	Inserting New Technologies in Undergraduate Architectural Curricula
doi	https://doi.org/10.52842/conf.ecaade.2007.423
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 423-430
summary	This paper describes a set of curricular tools devised to insert new technologies in an undergraduate architectural curriculum. These tools encompass three courses and laboratories with advanced geometric modeling, rapid prototyping, virtual reality, and remote collaboration facilities. The immediate goal was to set up the virtual design studio and enable creative design thinking. The ultimate goal was to fulfill the criteria of intellectual satisfaction, acquisition of specialized professional skills, and contribution for the economic development of society that should underlie university education.
keywords	Architecture, education, fabrication, digital media
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2007_353
id	caadria2007_353
authors	John, Elys
year	2007
title	Digital Ornament
doi	https://doi.org/10.52842/conf.caadria.2007.x.i5h
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Gaming and visualisation software has a history of developing economical and creative methods to deal with hardware limitations. Traditionally the visual representation of gaming has been a poor offspring of high-end architectural visualisation. In a twist of irony, the paper proposes that game production software leads the way into a new era of physical digital ornament. The toolbox of the rendering engine evolved rapidly between 1974-85 and it is still today 20 years later the main component of all visualisation programs. The development of the bump map is of particular interest; its evolution into a physical displacement map provides untold opportunities in the appropriation of the 2D image to a physical artifact. Contemporary Architects in tandem have been mapping to the façade a new era of complex three-dimensional sculptural representation. The Architect, Designer and Artist now have the opportunity to appropriate the image map and use advanced visualisation technologies in the application of digital ornament.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2014_011
id	ecaade2014_011
authors	Marie Davidova
year	2014
title	Ray 2:The Material Performance of Solid Wood Based Screen
doi	https://doi.org/10.52842/conf.ecaade.2014.2.153
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 153-158
summary	The wood - humidity interaction of solid wood has been tested through generations on Norwegian traditional panelling. This concept has been further explored by Michael Hensel and Steffen Reichert with Achim Menges on plywood and laminates in basic research. Plywood or laminates are better programmable but they are less sustainable due to the use of glue. This research focused on predicting the performance of solid wood in tangential section which is applied to humidity-temperature responsive screen for industrial production. With the method Systems Oriented Design, the research evaluated data from material science, forestry, meteorology, biology, chemistry and the production market. Themethod was introduced by Birger Sevaldson in 2007 with the argument that the changes in our globalized world and the need for sustainability demands an increase of the complexity of the design process. (Sevaldson 2013)Several samples has been tested for its environmental interaction. The data has been integrated in parametric models that tested the overall systems. Based on the simulations, the most suitable concept has been prototyped and measured for its performance. This lead to another sampling of the material whose data are the basis for another prototype. Ray 2 is an environmental responsive screen that is airing the structure in dry weather, while closing up when the humidity level is high, not allowing the moisture inside.
wos	WOS:000361385100016
keywords	Material performance; solid wood; wood - humidity interaction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2007_105
id	ecaade2007_105
authors	Matejovská, Dana; Achten, Henri
year	2007
title	CAAD Restarted
doi	https://doi.org/10.52842/conf.ecaade.2007.409
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 409-414
summary	In our faculty a new CAAD group has been started recently after a period of virtual non-existence of CAAD education. The responsibility of the group is twofold: to provide students with a basic competence in CAAD, and to develop a high standard of experimental studio work combined with research. In our philosophy, we aim to reach the first goal by giving a wide offer of basic skills teaching in many different CAAD softwares. Building on that, we offer more specialised classes for advanced modelling and integrate skills with design work in the design studio. Due to limited means, and a small staff, we develop this program step by step. Our preliminary scope therefore, is very modest, and mostly limited to the first years of CAAD education in the Bachelor studies. In this paper we summarise our goals and preliminary results. We monitor the progression of our educational program with an enquiry that was distributed among 200 students. In that way we can assess student response to our efforts. We report on the findings from the enquiry and formulate improvements and possible directions for our teaching.
keywords	CAAD education, pedagogy
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:59

_id	caadria2007_519
id	caadria2007_519
authors	Porter, David; Raid Hanna
year	2007
title	An Empirical Investigation into the Influence of Media Types on Design Cognition and Methodologies
doi	https://doi.org/10.52842/conf.caadria.2007.x.x4b
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper reports on the findings of an empirical investigation into the impact of different media on design methodology. The statistical sample included 49 fourth year architecture students, divided into three groups: the drawing group, the physical model group and the computer group. They were given a problem of designing a façade in an urban context in Glasgow over a two week period. The design process of each group was monitored over that period through observations, recordings and attitude measurement via a questionnaire survey. The results were analysed using the Statistical Programme for Social Sciences (SPSS). The dendrograms from cluster analysis revealed that there were well established perceptual dimensions, or clusters, for the façade’s design variables within the three groups because of using different media. The impact of media on design creativity, both as a process and a product, was investigated. All three media types yielded a positive correlation between ‘media made design decisions more creative’ and ‘media made design scheme more creative’- with a correlation coefficient of 0.708 which was significant at the 0.01 level, p<0.05.
series	CAADRIA
last changed	2022/06/07 07:50

_id	ecaade2007_119
id	ecaade2007_119
authors	Zupancic, Tadeja; Mullins, Michael
year	2007
title	Reconfiguring Course Design in Virtual Learning Environments
doi	https://doi.org/10.52842/conf.ecaade.2007.647
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 647-654
summary	Although many administrators and educators are familiar with e-learning programs, learning management systems and portals, fewer may have experience with virtual distributed learning environments and their academic relevance. The blended learning experience of the VIPA e-learning project for architectural students offers some innovative insights into experientially oriented educational interfaces. A comparative analysis of VIPA courses and project results are presented in the paper. Special attention in the discussion is devoted to the improvements of e-learning solutions in architecture. The criterion of the relation between the actual applicability of selected e-learning solutions and elements of collaborative educational interfaces with VR are taken into account. A system of e-learning applicability levels in program and course development and implementation of architectural tectonics in courseware is developed from the evaluation process and which contributes to the discussion of future trends in architectural education.
keywords	Architectural education, e-learning, virtual space
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia07_276
id	acadia07_276
authors	Anders, Peter
year	2007
title	Designing Mixed Reality: Principles, Projects and Practice
doi	https://doi.org/10.52842/conf.acadia.2007.276
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 276-283
summary	Mixed Reality is an increasingly prevalent technology that merges digital simulations with physical objects or environments. This paper presents principles for the design of mixed reality compositions. The principles are illustrated by projects and experiments by the author involving architecture and robotics.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_155
id	ecaade2007_155
authors	Bonwetsch, Tobias; Bärtschi, Ralph; Kobel, Daniel; Gramazio, Fabio; Kohler, Matthias
year	2007
title	Digitally Fabricating Tilted Holes
doi	https://doi.org/10.52842/conf.ecaade.2007.793
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 793-799
summary	Digital fabrication of building components by means of computer numerically controlled (CNC) machines is of high interest for architects and the building industry. Common design software does not allow for utilizing the potential that lies within these new technologies. To fully exploit the power of digital fabrication, new design paradigms have to be explored. In our design studios we implement direct scripting, the use of images to control parameters, as well as dynamical and rule based systems, which enables the designer to exploit the possibilities of digital fabrication. This paper provides an overview of the tools we developed. We will present some of the results from these classes and discuss its implications for future tool sets. It is essential to apply the knowledge of production methods at the starting point of the design process, in order to fully benefit from these new technologies. We believe that novel design strategies emerge out of this shift in production. Our goal is to integrate the principles of digital fabrication into the design process, resulting in a more valuable and sustainable architecture.
keywords	Digital fabrication, CNC, design tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_161
id	ecaade2007_161
authors	Dieckmann, Andreas; Netten, Sarah; Russell, Peter
year	2007
title	From Oh-Oh to OO
doi	https://doi.org/10.52842/conf.ecaade.2007.663
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 663-669
summary	The architect’s profession has always been that of an organizer; a coordinator. In an increasingly specialized society such as ours there is an even greater demand for professionals with a wide range of management abilities. Today’s architect will have to organize and coordinate the flow, the means and the systematic storage of information in a project. For an institution that ‘produces’ architects, it is, in the opinion of the authors, vital to not only teach modern / contemporary methods of organizing information but also to practice them. If architecture students are to comprehend the necessity of organizing skills & tools, they will have to encounter these from day one of their student life. It is perhaps surprising (or not) that niversities are not necessarily the best example of svelte, efficient organisations. On the contrary, they are often run on age-old principles that never change, despite acknowledged faults. A faculty of architecture has been developing a system to enable all members of the faculty, (teachers and students alike), with a central service for the management of information. This service is a set of web-based tools for organizing and managing the curriculum and all matters connected to that. The objective of the platform is to increase efficiency and transparency in the administration of the faculty. The effect of the system has been to develop a community. Two main aspects buttress this community. Firstly, the users are made aware of the presence of other users through a “Who’s On Campus” module. This module allows users to see which other users are logged in and using IP Addresses and WLAN Access Point Information, where they roughly are. Secondly, through a range of communication processes, informal communication is easily undertaken with other users online. The effect has been to improve the daily activities of the faculty. Achieving this has come about not by decree, but by convincing and observable benefits from the system.
keywords	Virtual universities, internet collaboration, CSCW
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: