Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20075107
id	ijac20075107
authors	Kieferle, Joachim; Wössner, Uwe; Becker, Martin
year	2007
title	Interactive Simulation in Virtual Environments - A Design Tool for Planners and Architects
source	International Journal of Architectural Computing vol. 5 - no. 1, pp. 116-126
summary	Simulations can assist planners in optimizing their design and in minimizing its environmental impact. By adjusting the architecture according to simulation results, and running further simulations based on the adjusted design, an iterative process can help to increase the design quality. Up to now computing simulations have taken a long time, thus only a very limited number of iterations could be calculated. This project shows an approach that is close to a real time simulation. By dividing the simulation into smaller parts and running the software on clusters or vector supercomputers, first results are available within several seconds, and reasonable results in less than one minute. Besides the technical features, another focus is the easy accessibility of the simulation. Intuitive methods like a tangible user interface provide easy interaction methods for specialists as well as non specialists. The results of the simulation can be visualized and interacted with from the desktop or any kind of virtual environments. Further aspects like limitations of automatic grid generation, shape recognition and computation power are discussed.
series	journal
email
last changed	2007/06/14 12:11

_id	ecaade2007_019
id	ecaade2007_019
authors	Asanowicz, Alexander
year	2007
title	Evolution of CAAD Teaching Methods
doi	https://doi.org/10.52842/conf.ecaade.2007.393
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 393-399
summary	In this paper evolution of CAAD teaching at architectural faculties will be presented. The CAAD will be considered as one of the components of skills and knowledge needed to support Design Studio. The paper is focused on the question “How architectural design may be combined with CAD teaching?” Formulation of this question results from opinion that position of CAAD in teaching of architectural design curriculum is different than other disciplines being taught at architectural schools. Introduction of CAAD to teaching schedules unquestionably and explicitly uncovered the need for changes within the whole schedule of study. Although great number of computer equipment is used, the students are still being taught as in the XIX century. In terms of achieved results it proves ineffective. Analyses have shown that evolution of teaching methods may be divided into four stages: software teaching, “personal involvement”, “replacement” and integration.
keywords	CAAD education, design curriculum
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_215
id	ecaade2007_215
authors	Boytscheff, Constantin; Sfeir, Marilu Kanacri
year	2007
title	Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
doi	https://doi.org/10.52842/conf.ecaade.2007.091
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
summary	The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords	Urban planning, virtual reality, immersive, teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2007_af76
id	sigradi2007_af76
authors	Dimenstein Koatz, Gilson
year	2007
title	Documentation and production of 3D information for Architecture, Urbanism and Archeology [Documentação e Produção de Informação Tridimensional para a Pesquisa em Arquitetura, Urbanismo e Arqueologia]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 336-339
summary	Close Range Photogrammetry received an impulse in direction of simplification and cost reduction when new software allowed the use of “off the shelf” cameras instead of high priced, sophisticated and rare metric cameras and the images captured by this simpler equipment begin to be scanned and treated by personal computers and plotted on simpler printers instead of the old and very expensive mechanical or analytical plotters.
keywords	Close range photogrammetry; architecture; urbanism; archeology; 3D documentation
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:50

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	b428
id	b428
authors	Joseph Chuen-huei Huang
year	2007
title	A Choice Model of Mass Customized Modular Housing by Internet Aided Design
source	Joint Conference Proceedings of International Mass Customization Meeting 2007 (IMCM’07) and International Conference on Economic, Technical and Organizational Aspects of Product Configuration Systems (PETO’07), pp. 61-75
summary	The Internet has increased the opportunities to apply the concept of mass customization to customer interaction by tailoring the content to individual needs. Within limited design parameters, customers can determine what options they wish by participating in the flow of the design process from the beginning. This concept has already been implemented in the computer, clothing, and automobile industries, but it has not been fully integrated in architecture, especially the housing industry which is more directly related to personal life style. The industry lacks a process that will lead to the customization of homes that respond to the unique values and needs of the occupants. The paper describes the relationship of client’s requirements and available design options of the proposed system by examples of its current prototype. By integrating the nature of modularity in prefabricated housing design, a proposed web-based design system will provide information filtering questionnaires to assist customers in selecting appropriate design components. A methodology has been developed that can generate design options based on the client’s needs and available modular components from selected product suppliers making it possible to simulate the final design before processing orders for assembling and manufacturing.
keywords	advisory system; customer participation; interactive questionnaire, housing delivery process
series	other
type	normal paper
email
last changed	2007/10/09 19:16

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	sigradi2007_af24
id	sigradi2007_af24
authors	Monedero, Javier
year	2007
title	Architectural eLearning: An inquiry into the fuzzy boundaries that separate education and instruction [Architectural eLearning. Una indagación sobre los límites borrosos que separan la educación y la instrucción]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 155-158
summary	This communication is based on the development of a new subject to be imparted in collaboration with three Departments (Visual Communication, Projects and Construction) at the School of Architecture of Barcelona. It is a work that has been financed with a special grant from our university, aimed at the development of new teaching modalities and, in particular, of those that would develop the use of new technologies, collaboration among university departments and eLearning. The aim of the communication is twofold. First, to present some results that we consider valuable in themselves, as much for the techniques as for the methodology that we have used. Second, to propitiate a debate on the new situation that the teaching of architecture is moving to, due to the advance of a series of instruction methods where the methodological organization, the storing of informative material and the preparation of autonomous interactive systems, open more and more effective roads of learning but that, at the same time, point towards a new educational structure that fits badly within the traditional structures in which we have still to work daily. Regarding the first point, the main aspects to highlight are: a) the development of a selflearning system by means of a very complete series of tutorials that allow a gradual acquisition, depending on the necessities or interests of each student, of geometric modeling, parametric design, visual simulation and interactive animation techniques, b) the development of a system of general information supply and on line comments and corrections. Regarding the second point, a provisional theoretical framework has been elaborated based on the consideration of the ubiquitous visual communication media as misleading mediators of a personal relationship. This theoretical frame has been tested by a few experiences carried out with the collaboration of students implied in the project. The general conclusion is that both challenges must be faced at the same time: new educational technologies must be analysed and integrated in our curricula and a new theoretical framework, able to clarify the difference between instruction and education, must be developed in parallel with those technologies.
keywords	Architecture; eLearning; Visual Communication
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2007_228
id	ecaade2007_228
authors	Pupo, Regiane; Celani, Gabriela
year	2007
title	Trends in Graduate Research on IT & Architecture: a Qualitative Comparison of Tendencies in Brazil and abroad
doi	https://doi.org/10.52842/conf.ecaade.2007.431
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 431-437
summary	Applications of information technology (IT) in the architectural profession have greatly increased in the past decades, ranging nowadays from concept design to automated construction. There are countless applications in the architecture practice that go well beyond representation, such as BIM software, generative design systems, and rapid prototyping and fabrication. For this reason, IT has been a frequent graduate research topic. In the present research academic graduate theses that dealt with IT in architecture since 1999 were surveyed and categorized, with the purpose of comparing the topics, applications and methods that are studied in Brazil and abroad. We hope that the differences found will help Brazilian architecture schools to update their IT curriculum, overcoming old prejudices against the use of computers in the creative phases of design.
keywords	Information technology, architectural design, design process, design education, computational design, CAD
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2007_511
id	caadria2007_511
authors	Rügemer, Jörg
year	2007
title	Various Media in the Design Process and Methodology
doi	https://doi.org/10.52842/conf.caadria.2007.x.t8j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	The paper describes the mergence of traditional architectural design processes with approaches that rely on digital media and software for the creation of architectural space. The depicted projects are part of a ‘work in progress’ process, with a recent studio that is set up to apply the so far accumulated experiences. Within the projects, focus is on those design phases where the applied media and methodology is changed and where the back and forth between different media and the depth of their implementation is perceptible in, and / or has a significant influence on the design itself. Through a line of successive experiments, the paper explains the development of a possible method that utilizes a variety of today’s accessible tools in architecture, making use of phenomena that appear when changing from one tool to another. Goal is to avoid limitations that are existent by the solely employment of one media or method, and to understand the fusion between different media as an inspiring momentum to develop the design further. The paper draws a line from an initially experienced and analyzed design method over several projects in practice and academia to conclude with a possible design method that could be established successfully in both fields of architectural teaching and practice. Initial experiences had been drawn from professional practice, in which the digital realm was limited to a support device of the design process. The first project that is described in the paper, explored the employment of digital media as a possible tool to drive the design process in a broader sense. The studio setting was organized as a laboratory for the exploration of the change of applied media. Focus was on the influence on the design progress. The design method required of the studios participants was not exclusively based on an architectural program, but on an initial, very conceptual process with an artistic approach, based on personal experiences of each participant. This was meant to detach the students entirely from architectural processes and mindsets they had picked up so far. Parallel to that kind of an intellectual process, studio participants learned to handle Maya as the 3D modeling software of their choice. Both the technical knowledge and the artistic projects were merged in a second project phase, in which participants had to further develop their work by applying a very effective mix of various design tools. Using digital media as a parametric design generator, subsequent projects were developed. The task for the designers here were to decide what kind of algorithm could be applied to which process and when it was to be stopped for the best result. Applying such an automatism successfully to the design process, the employment of traditional media and methodology remained, to adapt the digital driven schemes to the required design task. The diverse design experiments demonstrate important aspects when merging complex design and animation software with traditional design processes. To achieve good architectural design results, all examined projects showed that traditional design methods with its physical models are hardly replaceable to its full extent by other media, but digital media are able to strengthen design processes and invite designers to explore new means of design work.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_086
id	ecaade2007_086
authors	Oxman, Neri
year	2007
title	FAB Finding
doi	https://doi.org/10.52842/conf.ecaade.2007.785
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 785-792
summary	The distinction between material behavior (mechanics) and material response (electronics) in the framework of responsive building skins has promoted unique design protocols for integrating sensor technologies into material components. Such a distinction results in the implementation of remote sensing devices post the process of material fabrication. Sensors are commonly perceived as electronic add-on patches which initiate mechanical output with response to electrical input. This work seeks to establish a novel approach to the integration of electronics in building skins which prioritizes material selection, behavior and fabrication given a required task, over post-production sensor application. The term “FAB Finding” is proposed to describe an instrumental methodology facilitating the coupling of CNC fabrication processes with material organization and behavior. It offers a design mentality which emphasizes the nature and the effects brought about by the use of specific fabrication processes which are by definition inherent in the design product and its behavior. A light-sensing inflatable skin system is developed as a working prototype demonstrating such an approach.
keywords	Digital fabrication, material behavior, form-finding, sensors, responsive skin
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	b92c
id	b92c
authors	Derix, Christian
year	2012
title	Digital Masterplanning: Computing Urban Design
source	In Urban Design and Planning: Institution of Civil Engineers, Thomas Telford Publishers, ahead-of-print
summary	The digital revolution has finally reached urban design as one of the last design communities not very familiar with computing. This is despite the city and geography being the natural fields for systems analogy and digital models of mathematical and statistical simulation were developed in the 60s and 70s for urban planning, much before industrial or architectural design. The recent arrival of urban design simulations is however not as innovative and radical as their 50 year old counterparts since they use computing solely for policy visualization, quantity evaluation or pattern generation. The Computational Design and Research Group [CDR] at Aedas\|R&D started in 2007 to develop an open platform of lightweight applications – Digital Masterplanning – in collaboration with partners from academia and industry to provide methods for urban design, based on computational methods called meta-heuristic algorithms. An attempt to encode empirical knowledge and design assumptions into simulations is described where designers can assemble the resulting applications according to scales and brief into custom workflows.
keywords	Spatial Planning, Urban Design, Meta-Heuristic Algorithms, Computational Design
series	journal paper
type	normal paper
email
more	http://www.icevirtuallibrary.com/content/article/10.1680/udap.9.00041
last changed	2012/09/20 17:41

_id	ecaade2007_136
id	ecaade2007_136
authors	Dohmen, Philipp; Rüdenauer, Kai
year	2007
title	Digital Chains in Modern Architecture
doi	https://doi.org/10.52842/conf.ecaade.2007.801
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 801-804
summary	The “digital chain” is a continuous digital organization process, from the draft right into the manufacturing. Now one of these chains is applied on a mountain shelter. The individual steps are programmed and connected by universal interfaces. The computer is used not as passive digital drawing board, but as self-dependent tool that exerts influence on. Rules, dependence and aims, are formulated by the architect the computer can optimize due to its computing power. The role of the architect shifts thereby from the form designer to the role of a process designer. The aesthetics of the results is exciting and unusually, organically and self-evident - it is however always the result of given parameters. One topic is the complexity. The constructional modeling of the computers is a substantial support and easement. With programming techniques and parameterized construction, a high degree of individualizing becomes possible. A further point is efficiency. Construction with individual units, which former on was just realizable with high time and cost, become economically in this manner today. Furthermore computer-controlled machines work with precision and a detailing, which would be by workmanship neither temporally nor technically obtainable.
keywords	Digital chain, mass customization, one of a kind production
series	eCAADe
email
last changed	2022/06/07 07:55

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ascaad2007_001
id	ascaad2007_001
authors	Germen, M.
year	2007
title	Virtual Architecture: Reconstructing Architecture Through Photography
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 1-16
summary	The concept of construction in architectural design process is a temporary action that exists for a while and transforms itself into another product; i.e. the final building to be inhabited. Construction site can be taken as a podium where a play-to-remain-incomplete is being staged. The incompleteness causes us to dream, due to the fact that a complete building loses its narrative potential as it informs us about all the necessary pieces that constitute the whole: There is no puzzle to solve... Construction in this sense is like a historical ruin; Paul Zucker asserts that "ruins have held for a long time a unique position in the visual, emotional, and literary imagery of man. They have fascinated artists, poets, scholars, and sightseers alike. Devastated by time or willful destruction, incomplete as they are, they represent a combination of man-made forms and of organic nature." Architectural photography has the potential of re-creating this puzzle back again in order to bring an alternative representation to architecture. The architectural photographer is sometimes offered the freedom of reinterpreting, reconstructing architecture in order to be able to present a novel virtual perception to the audience. The idea here is to get some spatial clues that can later be used in other architectural projects. I was personally invited to two different concept exhibits in which I was given the freedom of inventing a virtual architecture through photography. The concept text written for one of these exhibits goes as follows: “I went, saw, stopped, attempted to grasp and enter it, looked at construction process and workers with respect, tried to internalize, wanted to claim it for a while, dreamed of creating a microcosm out of the macrocosm I was in, shot and shot and shot and finally selected: The created world, though intended for all, was probably quite a personal illusion...” Virtual architecture is a term used for architecture specifically created in the computer environment and never used in the realm of architectural photography. People like Piranesi, Lebbeus Woods, M.C. Escher, Marcos Novak, etc. previously dreamed about architectures that could exist virtually on paper, screen, digital environments. This paper will try to prove that this practice of (re)designing architecture virtually can be transferred to one of the most important realms of visuality: Photography. Various digital processes like stitching multiple photos together and mirroring images in image editing software like Photoshop, allow this virtual architecture to take place in the computer environment. Following this, I propose to raise the term “snap architecture” to connect it to the frequently referred concept of “paper architecture.”
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
doi	https://doi.org/10.52842/conf.acadia.2007.040
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_053
id	ascaad2007_053
authors	Islami, S.Y.
year	2007
title	Surface-driven architecture: Moving Beyond the Ornament/Structure Opposition
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 671-682
summary	Contemporary architecture has been influenced by a shift of interest from the dialectic Derridean theories of language to those of Deleuze and Guattari who put more emphasis on transitions, experimentation and material presence. New digital design tools as well as new construction materials have opened up more possibilities for architects. E-paper, digital screens, printed concrete, composite polymers and dynamic cladding systems, have allowed designers to relish architecture at the surface level. Moreover, the process of architectural design is shifting from the desktop to the virtual world of the computer. NURBS, Blobs, Metaforms, Isomorphic Surfaces and other complex geometries are now possible using surface-driven computer modelling software. Because of this, the resultant architecture display a much more distinct appreciation and mastery of surface-effects. The following article argues that contemporary architecture is becoming increasingly a process of surfacing, both as a process of revealing and as a process of concealing. Surface, in common parlance, is generally understood as the exterior boundary of things, the outer skin of any object. In this sense, surfaces are actual, material, textural entities that we often encounter first. The surface is also taken to be something that conceals: “it was not what it appeared to be on the surface.” However, it is when things surface that they become evident or apparent; they appear out of a previously concealed existence or latency. Thus, surfacing is a process of becoming explicit, of becoming experientially apparent in a movement from virtuality to actuality. This article argues that the use of emerging computer technologies in architecture, have resulted in a renewed prioritization of surface and surface-effects. It shall be concluded that the surface-driven nature of most contemporary modelling software has resulted in a new approach to architectural design, one that has the potential of subverting the traditional hierarchy between ornament and structure. As a result, this design strategy has allowed for a much more spirited and creative approach to architecture.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2020_184
id	ecaade2020_184
authors	Kycia, Agata and Guiducci, Lorenzo
year	2020
title	Self-shaping Textiles - A material platform for digitally designed, material-informed surface elements
doi	https://doi.org/10.52842/conf.ecaade.2020.2.021
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 21-30
summary	Despite the cutting edge developments in science and technology, architecture to a large extent still tends to favor form over matter by forcing materials into predefined, often superficial geometries, with functional aspects relegated to materials or energy demanding mechanized systems. Biomaterials research has instead shown a variety of physical architectures in which form and matter are intimately related (Fratzl, Weinkamer, 2007). We take inspiration from the morphogenetic processes taking place in plants' leaves (Sharon et al., 2007), where intricate three-dimensional surfaces originate from in-plane growth distributions, and propose the use of 3D printing on pre-stretched textiles (Tibbits, 2017) as an alternative, material-based, form-finding technique. We 3D print open fiber bundles, analyze the resulting wrinkling phenomenon and use it as a design strategy for creating three-dimensional textile surfaces. As additive manufacturing becomes more and more affordable, materials more intelligent and robust, the proposed form-finding technique has a lot of potential for designing efficient textile structures with optimized structural performance and minimal usage of material.
keywords	self-shaping textiles; material form-finding; wrinkling; surface instabilities; bio-inspired design; leaf morphogenesis
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: