Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 189

Reformat results as: short short into frame detailed detailed into frame

_id	c2f9
id	c2f9
authors	Friedrich E, Derix C and Hannah S
year	2007
title	Emergent Form from Structural Optimisation of the Voronoi Polyhedra Structure
source	Proceedings of the Generative Arts conference, Milan, 2007
summary	In the course of the exploration of computational means in the architectural design process, in order to investigate more complex, adaptive geometries, the Voronoi diagram has recently gained some attention, being a three-dimensional space-filling structure which is modular but not repetitive. The project looks at the Voronoi diagram as a load-bearing structure, and whether it can be useful for structural optimisation. Hereby the edges of the Voronoi polyhedra are regarded as structural members of a statical system, which then is assessed by structural analysis software. Results seem to indicate that the Voronoi approach produces a very specific structural as well as spatial type of order. Through the dislocation of the Voronoi cells, the statical structure becomes more complex through emergent topology changes, and the initially simple spatial system becomes much more complex thorough emerging adjacencies and interconnections between spaces. The characteristics of the emerging form, however, lie rather in the complexity how shifted spaces and parts are fitted together, than in a radical overall emergent geometry. Spatially as well as a structurally, the form moves from a simple modular repetitive system towards a more complex adaptive one, with interconnected parts which cannot stand alone but rather form an organic whole.
keywords	complex geometry, emergence, adaptive topology, voronoi diagram
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:25

_id	ecaade2007_050
id	ecaade2007_050
authors	Donath, Dirk; Böhme, Luis Felipe González
year	2007
title	Constraint-Based Design in Participatory Housing Planning
doi	https://doi.org/10.52842/conf.ecaade.2007.687
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 687-694
summary	The research presented in this paper deals with the yet unexplored development of a constraint-based design strategy to support participatory housing planning processes in Latin America. The article discusses the implementation criteria of a constraint satisfaction approach to solving the building bulk design problem. This elementary problem to the architecture practice, is concerned with the synthesis of the boundary geometry from the volume, shape and allocation of the building and any part thereof located inside a given zoning lot. A legal solution to a building bulk design problem is a building cubature that complies with all the applicable bulk regulations. The case study applies to the common class of single-family house units produced in Chile and the regulatory framework implemented there. Two different computer implementation criteria are being tested in an ongoing series of trials. The first, and most extensively developed, makes use of Maxon’s XPresso® visual scripting environment to set up a semi-automated controllable design environment that allows to create parametric feature-based 3D models of building bulk solutions. The second approach is currently being tested by using Ilog’s OPL Studio® constraint programming environment to achieve fully automated search and 2D graphic visualization of the complete set of solutions to separate subdomains of the bulk problem.
keywords	Constraint-based design, constraint satisfaction problems, building bulk design, participatory planning, low-income housing
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac20075207
id	ijac20075207
authors	Jabi, Wassim; Potamianos, Iakovos
year	2007
title	Geometry, Light, and Cosmology in the Church of Hagia Sophia
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 304-319
summary	Designed by a physicist and a mathematician, the Hagia Sophia church in Istanbul, Turkey acted as an experimental test case in which advanced knowledge of geometrical constructs, sophisticated understanding of light behavior, and religious and cosmological beliefs combined to create a magnificent structure. While some of its design concepts are known, many remain hidden. Earthquakes have demolished parts of the church—such as the original dome. Researchers have in the past misinterpreted their observations and perpetuated false conclusions. Lastly, the lack of digital tools has until now prevented verification and analysis of prior findings. In this paper, we integrate traditional historical research, parametric digital analysis, and lighting simulation to analyze several aspects of the church. In particular, we focus on the geometry of the floor plan, the geometry of the apse, and light behavior in the original dome. Our findings point to the potential of digital tools in the discovery of a structure's hidden features and design rules.
series	journal
last changed	2007/08/29 16:23

_id	bsct_kourkoutas
id	bsct_kourkoutas
authors	Kourkoutas, Vassilios
year	2007
title	Parametric Form Finding in Contemporary Architecture
source	Vienna University of Technology; Building Science & Technology
summary	The search of new geometry has been during the last years an interesting subject for Contemporary Architecture. As the 21st century brought a new era for architectural design, CAD programs have evolved together with the idea of Form Finding. The possibilities offered make the collaboration of the architect with the computer now possible in terms of searching the appropriate form for given cases. As the analysis of contemporary architectural pieces has indicated, the procedure of architectural design can be semi-automated. Parametric Form Finding is transferring generative approaches into the architectural design workflow by introducing a set of rules to describe the constrains of the form. Given this context, two methods have been realized, which are guided by the user by providing basic two dimensional shapes, restrictions and form characteristics. The approach is fitted in a plug-in for the modeling environment of Rhinoceros that generates three dimensional form based on the user?s input. The methods followed are being evaluated.
keywords	Parametric, Form Finding, Rhinoceros, plug-in
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2007/07/22 15:29

_id	ascaad2007_046
id	ascaad2007_046
authors	Lee, S. and K. de Bodt
year	2007
title	Plan_B: The architectonics of sonic information
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 587-594
summary	The paper addresses the influence of digital technology on architectural design and production, particularly considering the possibilities of sound for the design and conception of architecture based on the dynamic condition, which is present in the “everyday” and its permutations. The day-to-day condition is regarded as a highly dynamic flux of economic, social and political aspects and conceptually linked to sound and musical variation as guiding design principles, to actually retain and reflect the vitality of every day’s measure. We have traced precedents and cases in sound reproduction and its implications on the codification of architecture and have created a digital design tool in Max/MSP. The primary objective of the tool is to produce the corollary between sound reproduction and the conception and production of an architectonic codification, and ultimately to propose a strategy of architectural construct that has given way from the clarity of static geometry to the complexity in dynamic variability, that of dissonance. Virtual architecture and its techniques are considered to express and implement such permutations and induce a measure of change in every step and direction of the design process. The application of digital technology is regarded as the intervening of “apparatus” and to represent a different approach in relation to the prevailing regime.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_059
id	ascaad2007_059
authors	Matsushima, S.; D. Sasaki and R. Takenaka
year	2007
title	Embodying Architectural Form and Space by Coupling Computer and Human Performance Using Motion Capture Technology: Study on Application of Motion Capture to Design Process for Generating New Geometry
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 757-766
summary	This research aims to develop fundamental design methodologies for human space and product design by motion capture of human activity. It is intended to generate new geometry using a motion capture system as design input device and then to develop it to design interior space and products such as furniture from data extracted from human motion. In order to produce a ubiquitous and comfortable environment, performance modeling focusing on the relationships between space and physical motion is needed. Making an object of complex shape is thought to be a new application of motion capture technology. This research proves that the numeric data of body actions can be transferred and developed to object shapes.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ijac20075405
id	ijac20075405
authors	Oxman, Neri
year	2007
title	Get Real Towards Performance-Driven Computational Geometry
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 663-684
summary	In historic design conventions geometry has traditionally promoted descriptive manifestations of form. Beyond the realm of geometry, the concept of performance which may inform such manifestations also carries important potential for design generation. This work explores the relation between geometry and performance from a computational-geometry perspective. It does so by revisiting certain analytical tools offered in most of today's 3-D modelers which support the evaluation of any generated surface geometry specifically curvature and draft angle analysis. It is demonstrated that these tools can be reconstructed with added functionality assigning 3-D geometrical features informed by structural and environmental performance respectively. In the examples illustrated surface thickness (as a function of structural performance) is assigned to curvature values, and transparency (as a function of light performance) is assigned to light analysis values. In a broader scope this work promotes a methodology of performance-informed form generation by means of computational geometry. Vector and tensor math was exploited to reconstruct existing analytical tools adapted to function as design generators.
series	journal
email
last changed	2008/02/25 20:30

_id	acadia07_074
id	acadia07_074
authors	Peters, Brady
year	2007
title	The Smithsonian Courtyard Enclosure: A Case-Study of Digital Design Processes
doi	https://doi.org/10.52842/conf.acadia.2007.074
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 74-83
summary	This paper outlines the processes involved in the design of the Smithsonian Institution’s Patent Office Building’s new courtyard enclosure. In 2004, Foster + Partners won an invited international competition to design the new courtyard enclosure in Washington, D.C. Early in the project, the Specialist Modelling Group (SMG), an internal research and design consultancy, was brought in to advise the project team on computer modelling techniques, develop new digital design tools, and help solve the complex geometric issues involved. Throughout the project, computer programming was used as one of the primary tools to explore design options. The design constraints were encoded within a system of associated geometries. This set-out geometry performed as a mechanism to control the parameters of a generative script. The design evolution involved the use of many different media and techniques and there was an intense dialog between a large team and many consultants. The computer script was a synthesis of the design ideas and was constantly modified and adapted during the design process. The close collaboration between architects, consultants, and fabricators was of key importance to the success of the project. This project, now named The Robert and Arlene Kogod Courtyard, will complete in late 2007.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	acadia07_230
id	acadia07_230
authors	Qian, Cheryl Z.; Chen, Victor Y.; Woodbury, Robert F.
year	2007
title	Participant Observation Can Discover Design Patterns in Parametric Modeling
doi	https://doi.org/10.52842/conf.acadia.2007.230
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 230-241
summary	Our research aims to understand the mid-level patterns of work that recur across designers and tasks. Our users comprise active architects and civil engineers. The hypothesis is that making such patterns explicit will result in improved expert work practices, in better learning material and suggestions for improvements in parametric design. The literature shows that patterns express design work at a tactical level, above simple editing and below overall conception. We conducted a user experience study based on Bentley’s GenerativeComponents, in which geometry can be related, transformed, generated, and manipulated parametrically within a user-defined framework. After interviewing the system’s chief, we ran a participant-observer study in the January 2007 SmartGeometry workshop. We engaged designers through the role of tutor and simultaneously observed and discussed their design process. We found clear evidence of designers using patterns in the process and discerned several previously unknown patterns. In February at another 10-day workshop, we found more evidence supporting prior findings. The paper demonstrates that participant observation can be an efficient method of collecting patterns about designers’ work and introduces such new patterns. We believe these patterns may help designers work at more creative levels and may suggest new ideas of interest to CAD application developers.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	talapov02_paper_eaea_2007
id	talapov02_paper_eaea 2007
authors	Talapov, Vladimir
year	2008
title	Computer Modeling in Architecture by Example of St. Basil's Cathedral in Moscow
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	The aim of this article was testing in practice the modern computer modeling tools in real time. We took one of the most beautiful and geometrically complex structures in the world Architecture - St. Basil’s Cathedral in Moscow for that. As result we created the computer model of outside of this structure. And now we correct and improve its geometry and try to get its photorealistic and artistic visualization.
keywords	computer model, St. Basil’s Cathedral
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2007_af68
id	sigradi2007_af68
authors	Veloso, Claudia; Carlos Murad
year	2007
title	The Film as urban experience: The Fellini´s Roma [O Filme enquanto experiência urbana: A Roma fragmentária de Fellini]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 448-451
summary	This research is done in the field of studies about the potential of imaginal images in the unveiling of the multiple space-time alternances which make up our urban experience and is supported by phenomenological perspective of the imagination and Bachelard´s poetical image (1957,60) in the analysis do filme “Roma de Fellini”(1972). Of cinema as a possibility of highlighting the city and its geometry in a fragmentary and spectacular form. With the intention of arriving at a better dialogue among new languages and styles of life with the intention of opening new possibilities of a better understanding of the urban.
keywords	Poetical image; cinema; poetical urban; landscapes urban; imaginal film
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ijac20075404
id	ijac20075404
authors	Wierzbicki, Madalina N.; de Silva, Clarence W.
year	2007
title	Design Tools for Foldable Structures with Application of Fuzzy Logic
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 645-662
summary	Rigidly foldable shells offer tremendous potential for developing kinetic architectural structures. However, the added element of motion poses new design challenges. Initially, sketchy shell geometry is constructed to reflect the intended form. Further steps involve assuring an error free folding within a range that satisfies desired functional requirements. The kinematics of a parallel topology of the shell's geometry is difficult to express algorithmically what prevents from developing of automated adjustment tools based on computational methods. The geometry can be adjusted manually based on intuitive observations; however the process is tedious, time consuming and unpredictable. This paper develops automated adjustment tools based on the intuitive approach of a human designer. The study applies the fuzzy logic formalism as a computational interface between human approach and structured adjustments to the geometry. The advantages of fuzzy logic stem from its natural ability to represent human knowledge and effectiveness in reconciling ambiguities, uncertainties and redundancies that the intuitive human approach brings along. The development steps of fuzzy logic based algorithm are presented. Performed evaluation tests and the results are discussed.
series	journal
last changed	2008/02/25 20:30

_id	cf2007_061
id	cf2007_061
authors	Stavric, Milena; Heimo Schimek and Albert Wiltsche
year	2007
title	Didactical Integration of Analog and Digital Tools into Architectural Education
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 61-70
summary	This paper describes the new syllabus of the course “Methods of representation” that has evolved in the first year of architectural study at our university. Due to the rapidly growing digital possibilities students need to know/learn the new topics and tools which are relevant in modern architectural design practice. Our students should be empowered rather than overwhelmed by the arsenal of digital tools available today. In this course we try to define the essential skills in representation which we achieve through the synthesis of digital and analog methods and tools. Digital and analog methods and tools we use are: study and construction of complex geometry, observation and analysis of organic forms and their representation through hand drawing, collaborative work through peer-to-peer learning on our web interface, NURBS-modelling, rapid prototyping and desktop publishing.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ecaade2007_152
id	ecaade2007_152
authors	Ahmad, Sumbul; Chase, Scott C.
year	2007
title	Transforming Grammars for Goal Driven Style Innovation
doi	https://doi.org/10.52842/conf.ecaade.2007.879
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 879-886
summary	Shape grammar transformations have been used for developing new design styles by the systematic modification of grammars that encode existing styles. We make use of a style description scheme to aid grammar transformations for goal driven style change. A rule base was authored for the design of Greek temple facades, and was augmented with a style description scheme. These were tested at a student workshop wherein students were asked to develop grammars based on given style briefs. Results gained from the workshop confirmed that most students were able to assemble and transform grammars successfully. The method was found to be useful for teaching style and grammars to students and novice designers.
keywords	Design grammars, style, generative design, teaching
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2007_035
id	ascaad2007_035
authors	Al-Ali, A.I.
year	2007
title	Readiness for the Use of Technology for effective learning via the vds: Case of the United Arab Emirates
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 439-456
summary	Review of the literature indicated that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes such as problem solving, meta-cognitive skills, critical thinking and lifelong learning. Such skills can be acquired if learning and teaching are guided by the constructivist and cognitive learning theories. In particular, the constructivist approach emphasises effective learning processes based on learning by doing and collaboration. This approach is congruent with use of technologies, such as Virtual Design Studio (VDS), for the purpose of architecture education in design courses, but such use is lacking in the United Arab Emirates (UAE). It is thus important to assess the extent to which the constructivist and cognitive theories are implemented in teaching design courses in the Architecture schools of the UAE. It is also important to assess the effectiveness of employing technology in general and VDS in particular in implementing these theories. The author intends to study the relationship between effective learning on one hand and using VDS in implementing the constructivist and cognitive approaches on the other hand. Thus, the author conducted a preliminary study to gain a basic understanding of the difficulties, approaches, attitudes, perceptions, and motivation related to the learning of design in architecture schools in the UAE. Second, the investigation was designed to assess the extent to which the students would be interested in the use of sophisticated technology in the teaching and learning environment in the UAE architecture education schools in order to achieve effective learning. The study has been conducted in the United Arab Emirates University (UAEU). Methodology used for this was the focus group method. In addition to the focus group interviews with the UAEU students, unstructured individual interviews with lecturers from UAEU and the American University of Sharjah (AUS) have been carried out. Data analysis showed that students were not satisfied with the current teaching methods based on traditional lectures. It was concluded that students were ready to practice effective learning of design via the intermarriage of VDS and the constructivist and cognitive approaches. An ambiguity that remained was whether students were ready for assessment methods which are consistent with the constructivist approach.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_017
id	ascaad2007_017
authors	Alamgir, S.; A. Khan and K. Alamgir
year	2007
title	Computer Aided Environmental Solutions: Evaluation of Optimum Building Orientation in Lahore, Pakistan
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 213-214
summary	One of the primary features of solar passive design is the orientation of a building on a particular latitude. The client of Information Technology demands testing, validity, practicality and sustainability of a building project before execution. The computer based simulations are the only practical way to predict the complex energy performance and analysis for a large number of passive design solutions. This paper investigates the optimum residential building orientation having various zones, located in Lahore, Pakistan, with the help of Energy Simulation program. It is concluded that with the help of software, it is possible to orient the residential plan with the minimum solar gain of the required living zones.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_034b
id	ascaad2007_034b
authors	Ambrose, M.A.
year	2007
title	Body\|Form\|Space: Geometric translations of the body in motion
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 431-438
summary	This paper presents a novel approach to digital investigation of body, space, form and motion to expose issues of spatial perception. The spatial experience as generated from, and translated by, the human body is the focus of this work. The work explores the representational value of the body’s sense-image, the context and spatial/visual literacy of the learned sense of space-time generated from the study of the human body. Here the body is conceived not just in space but also in time, affording the ability to reinterpret the body and it’s dynamic motion engaged not as a static condition, but as a set of event spaces. Motion here is defined as a multiplicity of continuities that can be subdivided by artificial boundaries that describe space, time and body. The study of a series of bodies and movements is described that explore the human condition as a series of differential lines (form + time) and framed structures (bodies + motion). The intention is to examine the relationship between human form and metaphysical simultaneity as generators of architectural form. The work is structured by a research approach that dissects and isolates the representational concept/image from the body in a way that might offer an alternative description to the traditional historic models.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2007_af77
id	sigradi2007_af77
authors	Amorim Côrtes, Marta; Arivaldo Leão de Amorim
year	2007
title	Digital Photogrammetric Restitution of the Pelourinho’s Façades, in Salvador - Bahia, Brazil [Restituição fotogramétrica digital das fachadas do pelourinho, Salvador – Bahia, Brasil]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 375-379
summary	Brazil has so many historical cities with important architectural heritage. Some of them are remains of the colonial times and aggregate beautiful buildings such as, palaces, public buildings and churches in baroque style, legacy of the Portuguese colonization. Despite of its cultural value, most of these building sets are under several kinds of threats. This paper discusses about the experience on digital photogrammetric restitution of the building façades of Pelourinho, a neighborhood in the historical center of Salvador, the capital city of the State of Bahia. The architectural documentation is an important way to preserve and safeguard its memory, besides being an effective educational process about the meaning of preservation and cultural heritage.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: