Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 547

Reformat results as: short short into frame detailed detailed into frame

_id	d34b
id	d34b
authors	Horne M, Thompson E
year	2007
title	Virtual Reality and 3D modelling in built environment education
source	CONVR2007 7th Conference on Construction Applications of Virtual Reality, Penn State University, USA, 22-23 October 2007
summary	This study builds upon previous research on the integration of Virtual Reality (VR) within the built environment curriculum and aims to investigate the role of Virtual Reality and three-dimensional (3D) computer modelling on learning and teaching in a school of the built environment. In order to achieve this aim a number of academic experiences were analysed to explore the applicability and viability of 3D computer modelling and Virtual Reality (VR) into built environment subject areas. Although two-dimensional representations have been greatly accepted by built environment professions and education, three-dimensional computer representations and VR applications, offering interactivity and immersiveness, are not yet widely accepted. The project builds on previous studies which focused on selecting and implementing appropriate VR strategies and technologies (Horne and Hamza, 2006) and offers an approach on how three-dimensional computer modelling and virtual reality may be integrated into built environment teaching. It identifies the challenges and perceived benefits of doing so by academic staff and reports on the systematic approach which was adopted by Northumbria University, School of the Built Environment, to raise awareness of VR technologies across the spectrum of built environment disciplines. A selection of case studies is presented which illustrate how VR and 3D modelling have been integrated to extend traditional forms of representation and enhance the students’ learning experience. The attitudes perceptions, opinions and concerns of academic staff in regards to use of 3D and VR technologies in their teaching are discussed
keywords	Virtual Reality, 3D computer modelling, built environment, curriculum.
series	other
type	normal paper
email
last changed	2008/03/14 00:08

_id	cf2007_115
id	cf2007_115
authors	Whiting, Emily; Jonathan Battat and Seth Teller
year	2007
title	Topology of Urban Environments: Graph construction from multi-building floor plan data
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 115-128
summary	This paper introduces a practical approach to constructing a hybrid 3D metrical–topological model of a university campus or other extended urban region from labeled 2D floor plan geometry. An exhaustive classification of adjacency types is provided for a typical infrastructure, including roads, walkways, green-space, and detailed indoor spaces. We extend traditional lineal techniques to 2D open spaces, incorporating changes in elevation. We demonstrate our technique on a dataset of approximately 160 buildings, 800 floors, and 44,000 spaces spanning indoor and outdoor areas. Finally, we describe MITquest, a web application that generates efficient walking routes.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	caadria2007_329
id	caadria2007_329
authors	Jacobs, Zhya
year	2007
title	Capturing the Infinite: Bottom up CAD - CAM Technology for Regenerative Development
doi	https://doi.org/10.52842/conf.caadria.2007.x.b0l
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	In most design practices there is a division between the generation of information to describe buildings and the production of information to construct them. Today architects are in charge of the design of the building (aesthetics) while the contractor is accountable for the means of construction (tectonics). The advent of digital technologies within the field of architecture however has begun to cause and will continue to cause fundamental changes within the AEC industry. The Paper describes a possible scenario where a Bottom – Up, part to whole approach to architecture can be adopted using the freedom afforded by Parametric Design within the CAD-CAM environment. This approach is explored through the design of a smart block in concrete that is integrated into a wall system.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_049
id	ascaad2007_049
authors	Mokbel, H.; G. Salazar, M. Aboulezz and J. Tocci
year	2007
title	Choosing Levels of Granularity in Building Information Modeling: Contractor’s Perspective
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 623-634
summary	Over the last two years, there has been an increased interest across the Architectural /Engineering/ Construction (A/E/C) professionals in the potential adoption of the Building Information Modeling. Professional Associations such as the American Institute of Architects (AIA), the Associated General Contractors (AGC) and the Design-Build Institute of America (DBIA) are dedicating specific resources to better understand the implications of the use of this concept in their professional activities. However, not much ground has been gained yet in finding practical ways to choose the level of granularity (LOG) or detail that is needed to develop the digital model in a cost effective fashion. Choosing the Level of Granularity (LOG) of the digital model or level of detail development that goes into the model is a key decision that results from careful consideration of many factors. It is a very complex and iterative process that requires a critical assessment of the cost of adding details to the digital model versus the benefits derived from its intended purpose whether the model will be used to enhance the communication process or to support the construction management functions performed by the firm. This paper presents two case studies in which the authors have been directly involved in making the decision on the LOG of the digital model. The first case involves the Togar Suites, Union Station project in New Jersey while the second case refers to the Worcester Trail Courthouse in Worcester Massachusetts. In both cases, the 3D models were developed primarily for visualization of the construction sequence. However, in the case of the Togar Suites the contractor also needed the model for trade coordination and clash detection purposes.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2007_af24
id	sigradi2007_af24
authors	Monedero, Javier
year	2007
title	Architectural eLearning: An inquiry into the fuzzy boundaries that separate education and instruction [Architectural eLearning. Una indagación sobre los límites borrosos que separan la educación y la instrucción]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 155-158
summary	This communication is based on the development of a new subject to be imparted in collaboration with three Departments (Visual Communication, Projects and Construction) at the School of Architecture of Barcelona. It is a work that has been financed with a special grant from our university, aimed at the development of new teaching modalities and, in particular, of those that would develop the use of new technologies, collaboration among university departments and eLearning. The aim of the communication is twofold. First, to present some results that we consider valuable in themselves, as much for the techniques as for the methodology that we have used. Second, to propitiate a debate on the new situation that the teaching of architecture is moving to, due to the advance of a series of instruction methods where the methodological organization, the storing of informative material and the preparation of autonomous interactive systems, open more and more effective roads of learning but that, at the same time, point towards a new educational structure that fits badly within the traditional structures in which we have still to work daily. Regarding the first point, the main aspects to highlight are: a) the development of a selflearning system by means of a very complete series of tutorials that allow a gradual acquisition, depending on the necessities or interests of each student, of geometric modeling, parametric design, visual simulation and interactive animation techniques, b) the development of a system of general information supply and on line comments and corrections. Regarding the second point, a provisional theoretical framework has been elaborated based on the consideration of the ubiquitous visual communication media as misleading mediators of a personal relationship. This theoretical frame has been tested by a few experiences carried out with the collaboration of students implied in the project. The general conclusion is that both challenges must be faced at the same time: new educational technologies must be analysed and integrated in our curricula and a new theoretical framework, able to clarify the difference between instruction and education, must be developed in parallel with those technologies.
keywords	Architecture; eLearning; Visual Communication
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2007_331
id	cf2007_331
authors	Moum, Anita; Tore Haugen and Christian Koch
year	2007
title	Stretching the Trousers Too Far? Convening societal and ICT development in the architectural and engineering practice
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 331-344
summary	The publicly and privately funded national R&D program ‘Digital Construction’ was initiated in 2003 in order to establish a common platform for interchanging digital information and to stimulate digital integration in the Danish building industry. This paper explores the relation between visions, strategies and tools formulated in the ‘Digital Construction’ program, and the first experiences made from implementing the 3D work method part of the program in an ongoing building project. The discussions in the paper are placed in the complex field between choosing strategies for integrating information and communication technologies on national level, and the effects of these strategies on real life building projects.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
doi	https://doi.org/10.52842/conf.caadria.2010.443
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2007_029
id	caadria2007_029
authors	Abdelmohsen, Sherif; Ellen Yi-Luen Do
year	2007
title	TangiCAD: Tangible Interface for Manipulating Architectural 3D Models
doi	https://doi.org/10.52842/conf.caadria.2007.x.x8o
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper presents an interface for interacting with tangible objects to produce and edit architectural 3D models, called TangiCAD. TangiCAD is a tangible/virtual construction kit which allows architects to manipulate virtual models using easy hand control of tangible cubes, as an alternative interface for 3D modeling. It consists of a set of tangible cubes representing architectural elements, such as walls, columns, slabs,…etc., in addition to some editing operations. With more developed versions, the paper argues that architects could use tangible interfaces to carry out 3D modeling in an intuitive way, using their "flip-the-box" hands-on movement.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_006
id	ascaad2007_006
authors	Afify, H.M.N. and Z. A. Abd ElGhaffar
year	2007
title	Advanced Digital Manufacturing Techniques (CAM) in Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 67-80
summary	Building projects today are not only born out digitally, but they are also realized digitally through "file-to-factory" processes of computer aided manufacturing (CAM) and computer numerically controlled (CNC) technologies. It was the challenge of constructability that brought into question, what new instruments of practice are needed to take advantage of the opportunities opened up by the digital modes of production, instead of whether a particular form is buildable. In this case of building construction, architects could design with attention to innovative details, afforded by unique shapes and sizes, knowing that whatever they created on their computer screen could be fabricated digitally for an affordable price. The aims of the research are to discuss and analyze the digital manufacturing techniques (CAM) in architecture and its fabrication, production process. To understand how these technologies fit within a broader context of architectural practice. The research begins with defining, what is digital manufacturing in architecture, its potentials, components and influences in the contemporary architecture. Further more it discusses the digital fabrication, Two- dimensional cutting, subtractive fabrication, additive fabrication and formative fabrication. The assembly technique, building skin, new materials and mass- customization in digital manufacturing techniques (CAM). That will be a hand in analyzing several case studies.
keywords	Digital technology in architecture, Digital manufacturing, Formative fabrication, New materials, Fabrication machines and software.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_226
id	ecaade2007_226
authors	Agger, Kristian; Lassen, Michael; Knudsen, Nikolaj; Borup, Ruben; Rimestad, Jens; Norholdt, Peter; Bramsen, Nikolaj
year	2007
title	B-processor
doi	https://doi.org/10.52842/conf.ecaade.2007.043
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 43-50
summary	The B-processor is a redesign of the digital building information modelling/managing concept: Addressing the whole building industry participants and all phases in the building process. Offering a new “standard” for digital building information structure with generic modelling and evaluation tools in the B-model kernel. Plug-in structure for free extension of the B-processor system by the Building Industry. Kernel prototyped in Java to be downloaded for free – open source.
keywords	Digital applications in construction, digital fabrication and construction, prediction and evaluation, design methodology, generative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2007_283
id	caadria2007_283
authors	Ambrose, Michael A.
year	2007
title	BIM and Integrated Practice as Provocateurs of Design Education
doi	https://doi.org/10.52842/conf.caadria.2007.x.l3j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Building Information Modeling (BIM) obfuscates the role of composition, scale and abstraction by displacing the primacy of abstract conventions of representation with a methodology based on simulation. BIM subverts, while simultaneously clarifying, the holistic relationships of the parts to the whole in the architectural design of form and space. Architectural design education has great opportunity and risk in how it comes to terms with re-conceptualizing design education pedagogy as the profession struggles to redefine the media and methods of architectural deliverables in the age of BIM. The paper examines the foundation issues proposed by Integrated Practice. The paper questions how BIM and modeled simulation of architectural assemblage might transcend current definitions of convention in design and construction representation. This paper explores how the academy might prepare students of architecture for a digital practice that focuses on the virtual building model and database management. BIM and Integrated Practice viewed as provocateurs of design education provide great potential for critical analysis of how architectural design is taught. The associated pedagogies are transforming the way in which architectural education engages issues of design and representation and creates opportunities to question the roles and rules of traditional conventions. The paper seeks to engage issues of design specificity and ambiguity related to the assets and liabilities of digital modeling as the primary means of design and representation that BIM represents.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	lasg_whitepapers_2019_367
id	lasg_whitepapers_2019_367
authors	Atelier Iris van Herpen
year	2019
title	Exploring New Forms of Craft
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.367 - 392
summary	Dutch fashion designer Iris van Herpen and Canadian architect Philip Beesley have been united by friendship and a mutual interest in esoteric, experimental craft since 2012. Together they collaborated on various dresses, techniques and materials, featured in six of Iris van Herpen's Couture collections. Since her first show in 2007, van Herpen has been preoccupied with inventing new forms and methods of sartorial expression by combining the most traditional and the most radical materials and garment construction methods into her unique aesthetic vision.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	cf2007_153
id	cf2007_153
authors	Benrós, Deborah; José P Duarte and Fernando Branco
year	2007
title	A System for Providing Customized Housing
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 153-166
summary	This paper describes a system for generating customized mass housing. The aim is to provide dwellings at an affordable cost with recourse to mass production and yet guarantee that they are tailored to their users. It combines two systems, a rule-based design system and a prefabricated building system. The integration of both systems is achieved through the development of a computer tool to assist designers in the various stages of the housing design process. This tool produces three kinds of outputs: three dimensional models, construction drawings, and a list of construction elements, including their cost and information for manufacturing.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ijac20075307
id	ijac20075307
authors	Bessone, Miriam; Miro, Ricardo Perez
year	2007
title	Music and Architecture: Bonds, Interrelations, Transductions
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 551-569
summary	Digital technology and knowledge integration between musicians and architects enable us to explore and redefine links between music and architecture. This paper describes the experience and results of the creative processes undertaken by music and architecture students and academics to achieve a hyper-medial composition. The processes embrace the simultaneous construction from music to visual form and vice-versa. This exploration is originated from electro-acoustic music works, written ad-hoc, and based on specific assignments especially designed and framed within two types of situations and links with digital technologies: independent actions and interrelated actions. The intention of this work is to obtain constants and/or variables capable of allowing a certain type of graphic conventionalization that will make possible the mathematic representation previously necessary to create specific software tools.
series	journal
last changed	2007/11/20 18:06

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2007_094
id	ecaade2007_094
authors	Buattour, Mohamed; Halin, Gilles; Bignon, Jean Claude
year	2007
title	Management system for a Virtual Cooperative Project
doi	https://doi.org/10.52842/conf.ecaade.2007.125
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 125-131
summary	The paper presents on-going research aimed at the support of the management of building projects and the aid cooperative design. Today, The use of systems adapted to the cooperative design assistance for the building domain is complex. This results from the complexity of the cooperative work (difficulties in tracking actor’s work, lack of most of the required information, coordination problems, implicit nature of most of the construction activities etc.) The paper will briefly review two data exchanging modes that we had defined. After, on the basis of this concept of cooperative design we describe a new model of a virtual environment aimed to takes into account the relational organization of the project and the semantic meaning of works. This research represents a new approach because it not based on management of documents but on all data relative to works. Finally, we use this new model for defining a design-aided tool, to deduce advantages and limits of the “Virtual Cooperative Project”. This system lets geographically dispersed project actors model the project context of a building. More specifically, it allows interpreting, using and exchanging project works in a centralized virtual environment during the building life cycle. This system uses IFC objects which associate in the same model the semantic and the 3D representation of building works.
keywords	Cooperation model, cooperative work design, project management, digital mock-up
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2007_af05
id	sigradi2007_af05
authors	Butelmann Dujovne, David
year	2007
title	Design and digital manufacturing. From the Chilean boats to the double curvature roof [Diseño y manufactura digital. De la embarcación Chilota a la cubierta de doble curvatura]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 290-294
summary	The objective of this paper is to recover and highlite the constructive processes and the assembling of Chiloean wooden sea crafts, through the establishment of relationships between the design and digital specification for manufacturing of double curve roof, and traditional construction techniques of boats. The research is based on the exploration of digital constructive techniques, which integrate the design and the manufacturing systems of double curvature surfaces. By means of the reinterpretation of the constructive processes and the structural system of the Chiloean sea crafts.
keywords	Chiloean boats; Complex curved roof; digital design and manufacturing
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2007_084
id	ecaade2007_084
authors	Cenani, Sehnaz; Cagdas, Gulen
year	2007
title	Representation of User Movements with Multi Agent Systems: Shopping Malls
doi	https://doi.org/10.52842/conf.ecaade.2007.559
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 559-565
summary	This study aims to analyze relationships of users and spatial configurations using agent-based simulation systems under certain circumstances in a virtual environment with agents that represent users of a shopping mall. Multi-agent simulation methods are used to study emergent behavior patterns. A computer model is generated to simulate user movements in a shopping mall. Today, it is feasible to simulate the movement patterns of human societies at catastrophes like fire and earthquake within the buildings. In this study, exposing the dynamics of user-space relationship will help both students in architectural design education and professionals in practice, to observe and solve design problems before the construction of malls.
keywords	Artificial intelligence, agents, agent-based simulation, shopping mall, user movements
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia07_104
id	acadia07_104
authors	Chen, Chien-Lin; Johnson, Brian R.
year	2007
title	DVIN: A Dual View Information Navigation System
doi	https://doi.org/10.52842/conf.acadia.2007.104
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 104-109
summary	Differences in the preferred modes of representation of architects and their clients create challenges to their collaboration in the design process. Traditional two-dimensional drawings such as plans, sections and elevations form the backbone of architectural representation, anchoring text labels to record relevant non-graphical information. Nominally geometric “slices” through the proposed building volume, these drawings employ abstractions and conventions unique to professional practice. In contrast, non-architects think about building configuration largely through experiential or photographic perspective. This challenge increases over the life of the project. Simple drawings, such as those used in schematic design, are easily understood by all parties. However, as the building design develops the architects encode more and more design detail through the drawing conventions of construction documents, inadvertently making this detail less and less accessible to non-architects. We present DVIN, a prototype system that uses coordinated plan and perspective views for navigation of building information models, linking the information to an individual’s spatial navigation skills rather than their document navigation skills. This web-based application was developed using Java and VRML. The prototype makes it easier for naive users to locate and query building information, whether they are a client, a facility manager, or possibly an emergency responder. * NOTE: two pages missing from the printed proceedings have been appended to the PDF version of this paper and numbered 'erratum page 1' and 'erratum page 2' *
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2007_273
id	caadria2007_273
authors	Chitchian, Davood; H.C. Bekkering
year	2007
title	Sustaining Design Decision Makers in the AEC industry
doi	https://doi.org/10.52842/conf.caadria.2007.x.w3a
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Today’s typical decision making problem such as strategic planning, portfolio analysis, resource allocation and human resource management involves a variety of tangible and intangible strategic goals, conflicting constraints, dozens or hundreds of alternative initiatives to be pursued, and limited resources. A decision maker cannot meaningfully combine all of this information to make right decisions. To sustain decision makers in the Architecture, Engineering and Construction (AEC) industry, this paper proposes a tool to transfers a complex problem into a concept of hierarchical structure consisting of goal and its criteria and sub-criteria. Irrespective of the applied domains, this tool provides a flexible means for tackling the complex decision making process. It embeds a mathematical model for prioritization and decision making which is based on the Analytical Hierarchy Process (AHP).
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: