Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 552

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_249
id	caadria2007_249
authors	Nicholas, Paul; Mark Burry
year	2007
title	Import As: Interpretation and Precision Tools
doi	https://doi.org/10.52842/conf.caadria.2007.x.g6n
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper presents research on the relationship between digital tools and design communication, focussing on the interaction between architectural and lighting design. Early design integration often involves negotiating between different levels of resolution to inform a design that is still in formation, and part of the challenge is doing so in a manner appropriate to that phase of exploration. This paper describes some of the technical and social issues of translation and reports a project in which a generative design process supported the interaction between architectural design and lighting analysis; domains in which geometry is not necessarily a common ground.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_029
id	ascaad2007_029
authors	Prichard-Schmitzberger, A.
year	2007
title	Team-Working and Reverse Engineering: Teaching Methods for Complex Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 343-356
summary	This paper contains research and details of a work in progress on the implementation of advanced 3D precision modelling in an undergraduate curriculum. Core to the investigation is the undergraduate course Digitally Enhanced Construction and Fabrication (D.E.C.A.F.) at the Department of Architecture, California State Polytechnic University Pomona. The course tests the application of Reverse Engineering (RE) in a team configuration, Hot-Swapping (HS), and precision modelling of complex geometries with minimal programming/scripting input, taking in consideration the limited resources common to small-scale architectural practices. Reverse Engineering particularly enables students to extract information building assembly and executed details with precision, based on existing documentation. It is conducted in teams not only to emphasize and investigate efficiency of protocols but also to observe problems in developing threads in digital modelling. Hot-Swapping identifies the principle of replacing components of a building during active design processes without altering its general appearance. As a teaching methodology, it allows the investigation of required modelling accuracy, creation of prototypes and various versions of assembly alternatives. The current paper focuses mainly on 1) engaged procedures in Reverse Engineering, 2) the educational aspects of such an approach, and 3) the advantages and disadvantages of conventional tools in a collaborative modelling exercise.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_229
id	ecaade2007_229
authors	Yal_nay, _ebnem
year	2007
title	Gelassenheit: Dilemma of Computational Thinking in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2007.275
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 275-282
summary	Computational design technologies and tools though operate on a very high level of decisiveness and precision, have a common goal to provide further possibilities of setting free. The terms of rule-based systems, algorithmic thinking processes, parametric design data-bases though drag us to a distant place deep-in digital environment, are all there for a better dwelling on earth and a better understanding of world. How architects relate themselves to their environment of design and realization is a problem of how they relate themselves to the world in the larger frame. Representational thinking initiated by modern science and technology which bases itself on the object quality of being by “enframing” things through their measurable aspects, causes modern age to be an age of “pictures”; where the touch with being is “in oblivion”. Martin Heidegger’s concept of gelassenheit (letting-be, releasement and calmness) reminds the essential nature of thinking as not moving towards and forward with a will-to-power but by stepping back to offer the required offenheit (openness) to the coming-into-being of anything that is with a will-not-to-will. It is about being-in-the-world and dwelling on earth as a part of it. According to this paper, for a further understanding of architectural thinking, space, and production, and the changing paradigms of architecture in the computational era, Heidegger’s concept of gelassenheit both provides a basis and surprisingly encounters us as a recent and future architectural condition.
keywords	Enframing, dwelling, computational design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2007_203
id	caadria2007_203
authors	Heidrich, Felix; Peter Russell and Thomas Stachelhaus
year	2007
title	Intervision3D: Online 3D Visualisation and Conferencing
doi	https://doi.org/10.52842/conf.caadria.2007.x.l3p
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	The use of Internet communication technologies in distributed teams has been carried out for well over 10 years. In this time, various methods to communicate and transfer information have been developed. A large amount of effort has been placed on enabling normal conversation to take place and it could be said, that with technologies like Skype, this is established. This enables planning partners to discuss, but we still need to convey what they are discussing. In short, the contents are still lacking. Technologies exist to allow users to share files or images, however this does not nearly reach the intensity or quality of discussions when partners are sitting together in front of a drawing or model. At best, screen sharing allows participants to see the same image but with low resolution and bad system response. The goal of the Intervision3D project is to allow distributed team members to discuss design issues with a common 3D model where participants can manipulate the model together in real time. In contrast to screen-sharing solutions, the Intervision3D project uses a server, which delivers a copy of the model to each conference participant. The server then coordinates the perspective views of all conference participants. One of the participants (usually the first) is initially designated as the speaker and he or she controls the views of the model through an intuitive walk/fly-through interface. The speed of the system is also buttressed by the simplicity of the application: as a Java applet, it is possible to start the Intervision3D system in any browser or as a separate applet on any system. As such, none of the participants need to install anything. The resolution of the model is optimized for each participant's browser and computer display. Currently, Intervision3D can import .3ds files and then render them using the JOGL Engine (Java Bindings for Open GL). JOGL allows the full Open GL suite to be used in rendering the model including lighting and textures: even normal PCs can do this quite well. The first implementation of the system is within an existing internet-based Design Studio and the paper elucidates how the first uses of the system have (partially) helped to increase the exchange of design ideas over the Internet. Through the Intervison3D system, the participants who have been separated by distance can once again discuss the same 3D model.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_042
id	ascaad2007_042
authors	Ameireh, O.M.
year	2007
title	Abstract Thinking: An Introduction to Creative Thinking in Basic Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 527-542
summary	This paper critically examines the nature of the dramatic increase in the number of students accepted in schools of architecture in Jordan, and the contradictory decrease in their artistic, creative, thought process, projects problem solving and other skills. The paper also reviews architectural curriculum and courses to identify weaknesses in handling the changes and ultimately within these constraints and in order to handle the students variable potentials, abilities and contradictions, certain exercises in the basic design course are devised in ways that; reduces its dependency on learnable manual skills and conceptual thinking; uses teaching techniques that correlates and incorporates Arts, Architecture and Sciences as complementary topics; approaches and reaches creativity as a procedure not a gift; transfers and travels easily between complexities and simplicities, between natural and artificial intelligence, between abstract and relative thinking; employ geometries and design tools as the main structure of any composition; makes self evaluations of choices, decisions and variables easier. Taking Abstraction as a framework in solving the problem of the exercises gave answers and solution to many problems that was not easy solving under the conventional ways of design.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ascaad2007_038
id	ascaad2007_038
authors	Bakr, A.F. and D. Saadallah
year	2007
title	Strategic planning through Mapping of Water pollution in Lack of information system utilizing geographic information system (GIS): Lake Maryout, Alexandria, Egypt
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 479-490
summary	Strategic planning always requests supporting tools to defeat lack of data problems, which is a common drawback in our planning system as a result of several reasons. This paper is an extensive overview of the recent application of Geographic Information Systems (GIS) in the domain of water contamination in lakes. The authors try to establish a GIS mapping technique, which is customized for Lake of Maryout in Alexandria city, Egypt demonstrating various GIS analysis techniques/approaches applied to a diversity of real-life engineering endeavors in the water contamination control management sector in a lack of data system. First, the reader is concisely acquainted with the major steps of utilized mapping technique and how they are conducted. Second, the technique would be applied to define degree of water pollution distribution in Lake of Maryout. Finally, the output maps would be analyzed to delineate a quick and long term strategy of solution.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ascaad2007_039
id	ascaad2007_039
authors	Bakr, A.F.; I. Diab and D. Saadallah
year	2007
title	Detecting Inefficient Lighting Solutions: Step-by-Step Geographic information system (GIS) Technique
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 491-504
summary	Outdoor lighting is used to illuminate roadways, parking lots, yards, sidewalks, public meeting areas, signs, work sites, and buildings. It provides us with better visibility and a sense of security. When well designed and properly installed, outdoor lighting can be and is very useful in improving visibility and safety and a sense of security, while at the same time minimizing energy use and operating costs. But, because nobody thought at this, most street lights shine light not only on the nearby ground, where is needed, but also miles away and skywards. Thus a large fraction of the light is lost, at consumer expense and without his/her consent. In the other hand, shortage in street light may cause more crimes as well as accidents. Most of the wasted or short light comes from the poorly designed street lights. Billboards, decorative lights, poorly shielded security lights are part of the problem too, but the main culprit for the waste and ugly glow one sees above one's head at nights is from the streetlights. Thus, recent computer technology gives us tools to be employed for testing the quality of light. Geographic Information System (GIS) software could be utilized to achieve that mission through applying mapping technique. This technique could analyze digital photographs and define light polluted areas as well as bad lighted. This paper reveals that step by step technique, which employs hybrid technologies to solve such problem for better planning decisions.
series	ASCAAD
last changed	2008/01/21 22:00

_id	acadia07_120
id	acadia07_120
authors	Balakrishnan, Bimal; Muramoto, Katsuhiko; Kalisperis, Loukas N.
year	2007
title	Spatial Presence: An Explication From an Architectural Point of View
doi	https://doi.org/10.52842/conf.acadia.2007.120
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 120-129
summary	This paper provides the theoretical foundation for understanding the concept of spatial presence. This is important for improving architectural visualization tools so as to capture the experiential aspects of space. The paper is organized into three sections. The first section explicates the concept of spatial presence by identifying various conceptualizations of spatial presence in the literature and performing a meaning analysis. It then proceeds to examine mechanisms underlying the formation of spatial presence. The paper concludes by offering initial guidelines for improving the nature of digital tools to enhance the feeling of spatial presence.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_095
id	ecaade2007_095
authors	Benton, Sarah
year	2007
title	Mediating between Architectural Design Ideation and Development through Digital Technology
doi	https://doi.org/10.52842/conf.ecaade.2007.253
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 253-260
summary	Negroponte (Negroponte 1969) described how the creative thinking of a designer can become affected by the ‘machine’ urging the designer to draw a distinction between ‘heuristics of form’ and ‘heuristics of method’. This ensured that by taking advantage of digital technology a symbiotic relationship was maintained between both of these. To date architects have investigated digital tools for generating form and imagery with increasing success, but have arguably fallen short of using those tools for advancing their design methods. The research presented here explores questions not solely focusing on the use of the tools, but on heuristic methods of the profession, to examine the interconnectiveness of the design method and the tool in a symbiotic fashion; to examine the nature of creativity. This paper is taking a critical standpoint about the place of digital tools in an architect’s method in the pursuit of poetic architecture and, in particular, its representation, to enable speculation, as opposed to prediction, of ideas in the design process from the early phases. The issue is discussed through the findings of my doctoral research case studies that have proved germane to my particular enquiry, that is, digital mediationbetween design ideation and design development.
keywords	Ideation, development, design process, digital techniques, animation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_155
id	ecaade2007_155
authors	Bonwetsch, Tobias; Bärtschi, Ralph; Kobel, Daniel; Gramazio, Fabio; Kohler, Matthias
year	2007
title	Digitally Fabricating Tilted Holes
doi	https://doi.org/10.52842/conf.ecaade.2007.793
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 793-799
summary	Digital fabrication of building components by means of computer numerically controlled (CNC) machines is of high interest for architects and the building industry. Common design software does not allow for utilizing the potential that lies within these new technologies. To fully exploit the power of digital fabrication, new design paradigms have to be explored. In our design studios we implement direct scripting, the use of images to control parameters, as well as dynamical and rule based systems, which enables the designer to exploit the possibilities of digital fabrication. This paper provides an overview of the tools we developed. We will present some of the results from these classes and discuss its implications for future tool sets. It is essential to apply the knowledge of production methods at the starting point of the design process, in order to fully benefit from these new technologies. We believe that novel design strategies emerge out of this shift in production. Our goal is to integrate the principles of digital fabrication into the design process, resulting in a more valuable and sustainable architecture.
keywords	Digital fabrication, CNC, design tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20075305
id	ijac20075305
authors	Cabral, Claudia Pianta Costa
year	2007
title	ZOOM-IN, ZOOM-OUT: Architectural scale and digital technology
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 523-534
summary	This paper aims at contributing to the study of the relationship between technology, knowledge and representation. It is based on previous studies on architecture, art and technology in modernity and its development, as well as on studies about scale in architectural design. In despite of the fact that scale can be technically considered indifferent for computer-aided design, I intend to discuss how digital tools intercede in the process of clipping that selecting a specific scale eventually implies sustaining that, for architectural design, the concept of scale has to do both with representation and with knowledge of reality.
series	journal
last changed	2007/11/20 18:06

_id	ecaade2007_038
id	ecaade2007_038
authors	Campbell, Cameron
year	2007
title	The Kino-eye in Digital Pedagogy
doi	https://doi.org/10.52842/conf.ecaade.2007.543
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 543-550
summary	“I am the kino-eye” states Dziga Vertov in his classic movie The Man with the Movie Camera (1929). The relationship of the cameraman, the subject, and audience is a dynamic that he investigates through cinema. It is also a dynamic that inspires an innovative way for advanced digital media to be explored in architecture pedagogy. This paper is focused on three ways to translate the cinematic relationship developed in Dziga’s work to digital media in architecture: the way designers capture and manipulate digital media to make architecture; how the discourse of film and architecture can be informed by an understanding of the manipulation of digital media; and the role of digital media production as a form of research for architecture. The film is noteworthy because it is not a typical narrative screenplay, rather it is a visual experiment. In standard films the perceptions of space are manipulated through the camera and through other means, but the audience is rarely aware of it. However, Vertov is acutely aware of this dynamic and engages the audience by self-consciously using what would otherwise be considered a mistake – the viewer is aware that the camera looks at his/her own relationship with film not just the relationship of camera and scene. The translation of this into the classroom is that the same tools allow designers to be critical of their relationship with the medium and the way media is used to make architecture. This concept can be applied to any medium, but in this class it is applied to how students relate with produced motion images and editing that into a video production. The three elements described in this text are key aspects of not simply producing short films, but an opportunity to actually be introspective of architecture through an alternative media. Student projects include video montages that develop a cultural perspective on design and projects that are self-conscious of technology and how it impacts the production. The film-work necessary to achieve these productions is simultaneously conscious of the way in which the author relates to the scene and conscious of how that scene is edited in the context of the production.
keywords	Pedagogy, video, hyperspace, film
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_174
id	ecaade2007_174
authors	Carrara, Gianfranco; Fioravanti, Antonio
year	2007
title	X-House – A Game to Improve Collaboration in Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2007.141
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 141-149
summary	The current research we are conducting refers to a general model of architectural design. The complexity of the present-day design process is such that new ICT tools are required to consciously and appropriately govern the design choices. In particular, the tools that involve the early phases of the design process, when the choices crucial to the entire building process are made. In this perspective we are developing, together with a general model of architectural design based on Collaborative Design (CD), a simplified version of it – the _-House game – that can be used to help university students appreciate the complexity of doing architecture and building. This “simplified version” of the general model is therefore a useful ‘design training tool’ in the case of complex problems that can be solved by means of iterations, trade-offs, creativity, and group work; and at the same time makes it possible to highlight, define and link relatively little known aspects of design, such as scheduling, relations among operators, decision-making mechanisms, and process and design priorities.
keywords	Collaborative design, game, research and education, web based design
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:55

_id	sigradi2023_253
id	sigradi2023_253
authors	Cavalcanti, Isabella, Teixeira Mendes, Leticia and Albuquerque, Fernando
year	2023
title	From Modeling to Collective Digital Fabrication: Experience of the "Banco Cabaça"
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 543–554
summary	This paper presents an experience of collective digital fabrication and parametric modeling of furniture made with recycled plastic waste, inspired by natural elements of the Brazilian northeast. In addition to conventional joinery techniques, we highlight the technologies of rapid prototyping (PR) and digital fabrication (FD) (Volpato, 2007, Pupo, 2008; Pupo, 2009); as tools that promote a paradigm shift, both in the design process and in production and materialization (Kolarevic, 2005), allowing recycled plastic to have new applications. We started with a brief review of digital fabrication processes in Brazil, emphasizing collaboration in design and execution. Then, we contain the recycling of plastic and the need for actions for its best destination. Finally, we present a sustainable and collaborative design experience: the modeling and digital fabrication of furniture, entirely produced from recycled plastic, called “Banco Cabaça”.
keywords	Sustainable Design, Digital fabrication, Collaborative process, Parametric modeling, Brazilian design.
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaade2007_161
id	ecaade2007_161
authors	Dieckmann, Andreas; Netten, Sarah; Russell, Peter
year	2007
title	From Oh-Oh to OO
doi	https://doi.org/10.52842/conf.ecaade.2007.663
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 663-669
summary	The architect’s profession has always been that of an organizer; a coordinator. In an increasingly specialized society such as ours there is an even greater demand for professionals with a wide range of management abilities. Today’s architect will have to organize and coordinate the flow, the means and the systematic storage of information in a project. For an institution that ‘produces’ architects, it is, in the opinion of the authors, vital to not only teach modern / contemporary methods of organizing information but also to practice them. If architecture students are to comprehend the necessity of organizing skills & tools, they will have to encounter these from day one of their student life. It is perhaps surprising (or not) that niversities are not necessarily the best example of svelte, efficient organisations. On the contrary, they are often run on age-old principles that never change, despite acknowledged faults. A faculty of architecture has been developing a system to enable all members of the faculty, (teachers and students alike), with a central service for the management of information. This service is a set of web-based tools for organizing and managing the curriculum and all matters connected to that. The objective of the platform is to increase efficiency and transparency in the administration of the faculty. The effect of the system has been to develop a community. Two main aspects buttress this community. Firstly, the users are made aware of the presence of other users through a “Who’s On Campus” module. This module allows users to see which other users are logged in and using IP Addresses and WLAN Access Point Information, where they roughly are. Secondly, through a range of communication processes, informal communication is easily undertaken with other users online. The effect has been to improve the daily activities of the faculty. Achieving this has come about not by decree, but by convincing and observable benefits from the system.
keywords	Virtual universities, internet collaboration, CSCW
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2007_136
id	ecaade2007_136
authors	Dohmen, Philipp; Rüdenauer, Kai
year	2007
title	Digital Chains in Modern Architecture
doi	https://doi.org/10.52842/conf.ecaade.2007.801
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 801-804
summary	The “digital chain” is a continuous digital organization process, from the draft right into the manufacturing. Now one of these chains is applied on a mountain shelter. The individual steps are programmed and connected by universal interfaces. The computer is used not as passive digital drawing board, but as self-dependent tool that exerts influence on. Rules, dependence and aims, are formulated by the architect the computer can optimize due to its computing power. The role of the architect shifts thereby from the form designer to the role of a process designer. The aesthetics of the results is exciting and unusually, organically and self-evident - it is however always the result of given parameters. One topic is the complexity. The constructional modeling of the computers is a substantial support and easement. With programming techniques and parameterized construction, a high degree of individualizing becomes possible. A further point is efficiency. Construction with individual units, which former on was just realizable with high time and cost, become economically in this manner today. Furthermore computer-controlled machines work with precision and a detailing, which would be by workmanship neither temporally nor technically obtainable.
keywords	Digital chain, mass customization, one of a kind production
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: