Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 547

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20075403
id	ijac20075403
authors	Holzer, Dominik; Hough, Richard; Burry, Mark
year	2007
title	Parametric Design and Structural Optimisation for Early Design Exploration
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 625-643
summary	The investigation presented in this paper focuses on the following questions: How can engineering and architectural expertise, assisted by a process of digital optimisation, promote structural awareness regarding design alterations in the conceptual design stages? Can building geometry be set up computationally to render it sensitive to structural input? Which software tools are required to foster this interaction and what kind of decision support is needed to allow both architects and structural engineers to interact concurrently in this optimisation process? The authors of this paper form a team of researchers and practitioners from architectural and structural engineering background who combine their efforts to address the issue of interconnecting design intelligence across disciplines and advancing revised work methodologies in practice assisted by academic research. The research has shown that an integrated transfer of design information between architectural and structural designers in the early stages is beneficial to the collaboration if experts from both professions agree on common goals and define suitability rules that guide optimisation processes from the very beginning. To enable this, software tools are required that provide ad hoc decision support to create a wider array of informed design alternatives from which to choose.
series	journal
email
last changed	2008/02/25 20:30

_id	bsct_ahmeti
id	bsct_ahmeti
authors	Ahmeti, Flamur
year	2007
title	Efficiency of Lightweight Structural Forms: The Case of Treelike Structures - A comparative Structural Analysis
source	Vienna University of Technology; Building Science & Technology
summary	This work addresses the structural efficiency of lightweight tree-like structures for three case studies: Stuttgart Airport, Beaverton Library, and Thermal Bad Oeyenhausen. The case studies are simulated using Build simulation software, to determine the stresses induced in each structure. The material efficiency and shapes areexplored in terms of load bearing structures. Hybrids of the above structures are formed to compare the pattern morphology used by various types of tree-like structure and assess the structural behavior. In addition, (steel, wood and concrete) materials are compared to determine which would have better structural performance. In order to show the resemblance between the growing trees and the tree-like structures, an example of both cases is simulated and stresses evaluated. Results show that, in general, the minimum stress and deformations are obtained for steel. Structures made out of this material also exhibit higher load bearing capability, optimum stability factors and the best geometric efficiency, inspite of higher specific weight (10 times wood, and 3 times concrete).
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ecaade2007_088
id	ecaade2007_088
authors	Bechthold, Martin
year	2007
title	Teaching Technology: CAD/CAM, Parametric Design and Interactivity
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 767-775
doi	https://doi.org/10.52842/conf.ecaade.2007.767
summary	The paper discusses a project-based approach to technology teaching, and examines the case of the mobile information unit (MIU) for Harvard University and its art museums. A student competition was held to explore design alternatives for this unit. The winning entry proposed an interactive, pixilated fiber-optics display as well as touch screens. Parametric digital modeling was used in the design and design development of the scheme. Research included the study of structural alternatives, fabrication methods and the modes of interaction between users and the MIU.
keywords	Computer-aided design and manufacturing, fabrication, simulation, prototype, fiber optics
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c2f9
id	c2f9
authors	Friedrich E, Derix C and Hannah S
year	2007
title	Emergent Form from Structural Optimisation of the Voronoi Polyhedra Structure
source	Proceedings of the Generative Arts conference, Milan, 2007
summary	In the course of the exploration of computational means in the architectural design process, in order to investigate more complex, adaptive geometries, the Voronoi diagram has recently gained some attention, being a three-dimensional space-filling structure which is modular but not repetitive. The project looks at the Voronoi diagram as a load-bearing structure, and whether it can be useful for structural optimisation. Hereby the edges of the Voronoi polyhedra are regarded as structural members of a statical system, which then is assessed by structural analysis software. Results seem to indicate that the Voronoi approach produces a very specific structural as well as spatial type of order. Through the dislocation of the Voronoi cells, the statical structure becomes more complex through emergent topology changes, and the initially simple spatial system becomes much more complex thorough emerging adjacencies and interconnections between spaces. The characteristics of the emerging form, however, lie rather in the complexity how shifted spaces and parts are fitted together, than in a radical overall emergent geometry. Spatially as well as a structurally, the form moves from a simple modular repetitive system towards a more complex adaptive one, with interconnected parts which cannot stand alone but rather form an organic whole.
keywords	complex geometry, emergence, adaptive topology, voronoi diagram
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:25

_id	caadria2007_639
id	caadria2007_639
authors	Jinuntuya, Pinyo; Jirayod Theppipit
year	2007
title	Temporary Housing Design and Planning Software for Disaster Relief Decision Support System
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.k9q
summary	There is a continuous and urgent need for disaster relief in Thailand and countries suffering from floods and tsunami impact. Based on this issue, design and planning software for temporary housing project has been developed, as well as the process and guideline for implementation. This paper describes a unique coupling of interactive 3D virtual environment with parametric designing in order to manage disaster relief project more efficiently. Architects and planners can use the functionality of software on both design simulation and project evaluation aspects. We need to provide correct information to help people making decision when they are in disaster. So the disaster relief decision support system must offer proper information of crisis management focused on people, place, and process. One of the main features of software is the relationship modeling of essential factors such as number of people, houses, budget, time, and space. This automatic temporary houses generation and space planning is simulated for land use and layout plan design with cost estimation analysis. The system components were proposed to a new disaster relief system in alternative approach. Using community-based development will not cost budget but required people participation. Our software’s space coordination will start and centered from available space in school or temple with sufficient infrastructure. After essential factors are inputted, appropriated number of temporary houses, public facilities, and management guideline will be generated to support further planning decision. Our core system was developed on Java and Swing Technology, empowered by real-time 3D rendering CAD engine. In addition, “Virtools” as our Authoring Tools was applied to improve design interaction and explore rapid software prototyping. At the end, we discuss the comparison between real situations in Thailand and appropriate design standardization, which should be reconsidered how to manage crisis with the limitation of time and budget from government.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_511
id	caadria2007_511
authors	Rügemer, Jörg
year	2007
title	Various Media in the Design Process and Methodology
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.t8j
summary	The paper describes the mergence of traditional architectural design processes with approaches that rely on digital media and software for the creation of architectural space. The depicted projects are part of a ‘work in progress’ process, with a recent studio that is set up to apply the so far accumulated experiences. Within the projects, focus is on those design phases where the applied media and methodology is changed and where the back and forth between different media and the depth of their implementation is perceptible in, and / or has a significant influence on the design itself. Through a line of successive experiments, the paper explains the development of a possible method that utilizes a variety of today’s accessible tools in architecture, making use of phenomena that appear when changing from one tool to another. Goal is to avoid limitations that are existent by the solely employment of one media or method, and to understand the fusion between different media as an inspiring momentum to develop the design further. The paper draws a line from an initially experienced and analyzed design method over several projects in practice and academia to conclude with a possible design method that could be established successfully in both fields of architectural teaching and practice. Initial experiences had been drawn from professional practice, in which the digital realm was limited to a support device of the design process. The first project that is described in the paper, explored the employment of digital media as a possible tool to drive the design process in a broader sense. The studio setting was organized as a laboratory for the exploration of the change of applied media. Focus was on the influence on the design progress. The design method required of the studios participants was not exclusively based on an architectural program, but on an initial, very conceptual process with an artistic approach, based on personal experiences of each participant. This was meant to detach the students entirely from architectural processes and mindsets they had picked up so far. Parallel to that kind of an intellectual process, studio participants learned to handle Maya as the 3D modeling software of their choice. Both the technical knowledge and the artistic projects were merged in a second project phase, in which participants had to further develop their work by applying a very effective mix of various design tools. Using digital media as a parametric design generator, subsequent projects were developed. The task for the designers here were to decide what kind of algorithm could be applied to which process and when it was to be stopped for the best result. Applying such an automatism successfully to the design process, the employment of traditional media and methodology remained, to adapt the digital driven schemes to the required design task. The diverse design experiments demonstrate important aspects when merging complex design and animation software with traditional design processes. To achieve good architectural design results, all examined projects showed that traditional design methods with its physical models are hardly replaceable to its full extent by other media, but digital media are able to strengthen design processes and invite designers to explore new means of design work.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_011
id	ecaade2007_011
authors	Tessmann, Oliver
year	2007
title	Structural Analysis as Driver in Surface-based Design Approaches
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 109-115
doi	https://doi.org/10.52842/conf.ecaade.2007.109
summary	This ongoing research argues for novel strategies to integrate structural analysis data in an architectural design approach. Instead of a linear procedure of synthesis, analysis and post-rationalisation a synthesis/analysis loop is installed that uses structural analysis data as design driver from early on. The approach is not aiming for a pure force-driven form-finding or optimization process but regards structural performance as one design criteria among others. Equilibrium between multiple parameters is aspired instead of a single-parameter-optimum. The research is conducted by a custom-made digital interface between a 3d modelling software and an application for structural analysis of space frames structures. Surfaces are translated into meshes with supports at user-defined nodes and then exposed to its dead load in the structural analysis software. The resulting nodal deviation is feed into an algorithm that steers the appropriate reaction towards the local stresses and deviations, taking into account the mesh topology, its supports and their position in the mesh. The initial mesh is optimized in shape transformed back into a double-layer surface model in the 3d software which evolves into an interconnected two-layer space frame. An instant feedback from synthesis to analysis and vice versa is installed. Analysing techniques migrate into the realm of synthesis.
keywords	Optimization, collaborative design, structure and surface
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ascaad2007_027
id	ascaad2007_027
authors	Villalon, R. and J. Lobel
year	2007
title	Materializing Design: contemporary issues in the use of cad/cam technology in the architectural design and fabrication process
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 317-326
summary	While the ability to produce and quantify design and fabrication information has been greatly enhanced by advances in CAD/CAM technology over the last several decades, a practical link between what can be modelled virtually and what can be built physically has yet to be realized. The process of parsing complex design information and translating it into a format that can be utilized by those responsible for its fabrication is a many-stepped process, in some cases made increasingly difficult by the same technology intended to simplify the process. The use of CAD/CAM technology in the architectural design process requires ongoing consideration as its use becomes increasingly pervasive in the design process. Within the context of contemporary architectural practice and discourse, what is the degree of fidelity between design information and fabrication information? How are advances in accessibility to, and the capability of CAD/CAM technologies affecting the role of the architect in the overall building process? Does CAD/CAM offer unique and undiscovered possibilities to re-associate the designer with the builder, or simply a process of more efficiently automating the design and construction process? Our work builds upon issues of the fundamental differences that CAD/CAM technologies introduce to design practices; issues that were raised at the very outset of CAD/CAM’s introduction to architectural design. Employing parametric design software, we design and construct a speculative façade system for a high-rise tower which is then fabricated at a reduced-scale with various two-axis CAM technology. We use relational and constraint-based logics in order to create models of parametric assemblies of discrete components which are translated into machine-ready formats, fabricated and re-assembled, in a process modelled on that typically followed in the construction of a real building project.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ijac20075406
id	ijac20075406
authors	Iordanova, Ivanka
year	2007
title	Teaching Digital Design Exploration: Form Follows
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 685-702
summary	This paper presents some challenges of teaching computational geometry to architectural students, and proposes a multi-level pedagogical scheme introducing associative geometry and parametric modeling/design into architectural design education. It reports on two pedagogical experiences: one held in the context of a spatial geometry course in the first year of education; and another one, in a digital design studio with third-year architectural students. More specifically, it discusses the impact on design exploration of a library of interactive referents models introduced into the architectural studio. Situated in the 'performance' paradigm of digital design methods, they allow for design object explorations based on modification of architecturally meaningful features (structural, environmental, functional, etc.). The form of a design object can thus 'follow' function, structure, or even sustainability. The digital methods and the design knowledge transferred by the interactive models, together with their visual nature, are found to amplify the processes of 'seeing-as' and the 'reflective conversation with the situation' considered essential for creative design.
series	journal
email
last changed	2008/02/25 20:30

_id	bsct_senses
id	bsct_senses
authors	Senses, Nilufer
year	2007
title	Foam Structures: A Comparative Structural Efficiency Analysis Based on the Building Case "Watercube"
source	Vienna University of Technology; Building Science & Technology
summary	Foam structure in macro-scale has arisen as a new type of large span building structure recently which is a product of cooperation of advanced structural design, radical architectural design approach, and computer and software technology, and efficiency of foam structure became an important question to answer which could help further structural improvements. This study analyses efficiency of large span foam structure relative to conventional large span building structures with a parametric simulation method. Space frames are a special case of conventional large span structures one compared with foam structures, because it satisfies criteria such as being lightweight and three-dimensional as foam structure. Analysis is based on the comparison of base cases of foam model and space frame model, which are developed on light of real projects the Water Cube and the Symbol Zone of Expo’70, based on the parameters structural depth, weight and displacement, and vertical and horizontal load cases. During the analysis structural behavior of base cases were simulated by using a special structural behavior simulation program. It was found that foam model is more efficient than space frame model in terms of structural depth which is an important issue for large span building structures from both architectural and engineering point of view. Capability of spanning large distance with significantly less structural depth makes foam structure a preferable, new generation, steel structure for large spans. Moreover, the development process of base case foam model demonstrated the critical importance of geometrical design concerns of foam structure. Structural behavior simulations were exposed that structural optimization is one of the vitally important process of structural design of the foam structure.
keywords	Foam structure, space frame, geometrical optimization, structural optimization, structural behavior simulation
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ijac20075307
id	ijac20075307
authors	Bessone, Miriam; Miro, Ricardo Perez
year	2007
title	Music and Architecture: Bonds, Interrelations, Transductions
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 551-569
summary	Digital technology and knowledge integration between musicians and architects enable us to explore and redefine links between music and architecture. This paper describes the experience and results of the creative processes undertaken by music and architecture students and academics to achieve a hyper-medial composition. The processes embrace the simultaneous construction from music to visual form and vice-versa. This exploration is originated from electro-acoustic music works, written ad-hoc, and based on specific assignments especially designed and framed within two types of situations and links with digital technologies: independent actions and interrelated actions. The intention of this work is to obtain constants and/or variables capable of allowing a certain type of graphic conventionalization that will make possible the mathematic representation previously necessary to create specific software tools.
series	journal
last changed	2007/11/20 18:06

_id	ijac20075402
id	ijac20075402
authors	Burry, Jane R.
year	2007
title	Mindful Spaces: Computational Geometry and the Conceptual Spaces in which Designers Operate
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 611-624
summary	Combinatorial computational geometry, while dealing with geometric objects as discrete entities, provides the means both to analyse and to construct relationships between these objects and relate them to other non-geometrical entities. This paper explores some ways in which this may be used in design through a review of six, one-semester-long design explorations by undergraduate and postgraduate students in the Flexible Modeling for Design and Prototyping course between 2004 and 2007. The course focuses on using computational geometry firstly to construct topologically defined design models based on graphs of relationships between objects (parametric design,) and concurrently to output physical prototypes from these "flexible models"(an application of numerical computational geometry). It supports students to make early design explorations. Many have built flexible models to explore design iterations for a static spatial outcome. Some have built models of real time responsive dynamic systems. In this educational context, computational geometry has enabled a range of design iterations that would have been challenging to uncover through physical analogue means alone. It has, perhaps more significantly, extended the students' own concept of the space in which they design.
series	journal
email
last changed	2008/02/25 20:30

_id	sigradi2007_af05
id	sigradi2007_af05
authors	Butelmann Dujovne, David
year	2007
title	Design and digital manufacturing. From the Chilean boats to the double curvature roof [Diseño y manufactura digital. De la embarcación Chilota a la cubierta de doble curvatura]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 290-294
summary	The objective of this paper is to recover and highlite the constructive processes and the assembling of Chiloean wooden sea crafts, through the establishment of relationships between the design and digital specification for manufacturing of double curve roof, and traditional construction techniques of boats. The research is based on the exploration of digital constructive techniques, which integrate the design and the manufacturing systems of double curvature surfaces. By means of the reinterpretation of the constructive processes and the structural system of the Chiloean sea crafts.
keywords	Chiloean boats; Complex curved roof; digital design and manufacturing
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2007_689
id	caadria2007_689
authors	Chung, Daniel Hii Jun
year	2007
title	Best Practice for Achieving Real-Time Virtual Reality Architectural Visualization
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.i4m
summary	Real-time rendering is the most fundamental aspect of the virtual reality technology, which is always, a balance between hardware advancement and efficient software algorithm upgrades on the one hand and the demands of the quality output on the other. As architects who utilize this technology, what we can do as users is to optimize the parameters we can control in the files we input to run the simulation. Thus the identification of the few variables we can control to prevent a lagging performance or ghosting which is no longer realtime. The frame rate above all is the measurement to determine whether a simulation is real-time or not. The research aim is to identify the biggest contributing factors among the few identified. The intention is to save time and effort by optimizing the selected factors in projects so that we do not have to optimize all of them. The workflow will also be a lot faster and projects can be done efficiently. The final part is to run satisfaction tests among users to evaluate those biggest contributing factors and the qualities acceptable by users. This is to eliminate the added processing power needed to run bigger files if they do not contribute much to improved quality.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_097
id	caadria2007_097
authors	Du, Rong; Yuan Gao
year	2007
title	Collaborative Design Practice with New Concept
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.o3m
summary	Collaborative design is increasingly important in the design and building industry. These kinds of communication have been lagged in the institutes of China because of the lack of correlative software and hardware equipments or research funds. The paper describes the collaborative design between TUD and SEU in 2005.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia07_066
id	acadia07_066
authors	Gün, Onur Yüce ; Wallin, Nicholas J.
year	2007
title	Composing the Bits of Surfaces in Architectural Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 66-73
doi	https://doi.org/10.52842/conf.acadia.2007.066
summary	Emergent design tools, with enhanced modeling and parametric manipulation capabilities, are encouraging the exploration of new geometric typologies in the field of architecture. Designers are not only finding more opportunities to work with geometries of higher complexities but are also becoming able to manipulate their designs with simple formulations. After a decade of familiarity with free form modeling tools, architects must now become more aware of the critical relationship between design and construction. When a design is performed without taking the constraints of construction into account the inefficient method of geometric post-rationalization becomes necessary. Thus, the knowledge of the rationale should be applied from the very beginning of the design processes, and digital models should be informed and controlled while being developed. This paper will present analytical strategies and methods for working with nonstandard geometries in a geometrically and parametrically controlled environment. Each method is supported with custom scripts which run in both parametric and non-parametric computer aided design (CAD) platforms. Each script and method is manipulated for the next project and the computational tools created build up a library of surface generation, manipulation, and subdivision tools. This library later becomes a source for office-wide use of surface manipulation.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ascaad2007_052
id	ascaad2007_052
authors	Hamza, N. and M. Horne
year	2007
title	Building Information Modelling: Empowering Energy Conscious Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 661-670
summary	The increasing awareness of climate change and carbon dioxide emissions from the built environment is resulting in the need to visualize the environmental performance of buildings. One of the recent drivers in the UK has been the tightening of building regulations relating to energy consumption in buildings, mandating all buildings to be performance evaluated by accredited environmental simulation tools to test their carbon dioxide emission against set targets. Currently there is major confusion on all levels from architects to building control officers and contractors on how to engrain energy consciousness principles in the design and construction of buildings. Within this context, ‘Building Information Modelling’ that is linked to ‘Building Performance Modelling’ is increasingly being looked upon as a tool to facilitate the communication between the design team and contractors and to provide a transparent information model on the specification and targeted energy consumption of all new/ refurbished buildings to all parties involved. In this paper, analysis of the benefits and drawbacks of current efforts to combine those two comprehensive databases will be investigated. A sample of main software development companies, architects and contractors, using semi-structured interviews is undertaken to find out how Building Integrated Modelling (BIM) and Building Performance Modelling (BPM) can support the design and construction teams to deliver energy conscious buildings.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2007_303
id	cf2007_303
authors	Holzer, Dominik; Yamin Tengono and Steven Downing
year	2007
title	Developing a Framework for Linking Design Intelligence from Multiple Professions in the AEC Industry
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 303-316
summary	The research presented in this paper addresses the issue of bridging conceptual differences between the theories and practice of various disciplines in the AEC industry. The authors propose an application logic that works as a framework in assisting the evaluation process of multidisciplinary design. Parametric design templates assist in channeling and integrating information generated during the design process.
series	CAAD Futures
email
last changed	2007/07/06 12:47

For more results click below: