Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 516

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2007_043
id	ascaad2007_043
authors	Chen, G.-Y. M.
year	2007
title	Tagging Your Body Virtually : Represent a place making process with social network
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 543-558
summary	This research focuses on the virtual environment of place making. In this paper we would like to emphasize that the place making should be stressed collective views in order to obtain the design application of possibilities. However, in past researches there has been no study that tried to collect the collective views by digital ways. Accordingly, this paper proposes a response thought the Spatial Intention. It could be used to represent the human of body experience. The "moving" and "standing" are appropriate to two main considerations. Both of these could be connected to the action of "focus" and "choice." these leads to a sequential relationship of place production. The positive significance of the spatial intention lies in the convertibility of physical experience could be implied with a specific understanding. It also could be used to mold the place of knowledge structure. Thereby in order to verify the reliability of the above, we made a social network of virtual environment and used the rapid prototyping method to develop a prototype system. Implementing on the Chinese garden of the actual case, we found that the tag could concentrate as an entire sense in somewhere of place. These tags also could be shared remotely through the social network. Different tags in the sharing mechanism could collage out a place of collective views. This perspective would be used to assist designers to understand the sense of place. It also would be applied to find out the environmental design of possibilities in the future studies.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_639
id	caadria2007_639
authors	Jinuntuya, Pinyo; Jirayod Theppipit
year	2007
title	Temporary Housing Design and Planning Software for Disaster Relief Decision Support System
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.k9q
summary	There is a continuous and urgent need for disaster relief in Thailand and countries suffering from floods and tsunami impact. Based on this issue, design and planning software for temporary housing project has been developed, as well as the process and guideline for implementation. This paper describes a unique coupling of interactive 3D virtual environment with parametric designing in order to manage disaster relief project more efficiently. Architects and planners can use the functionality of software on both design simulation and project evaluation aspects. We need to provide correct information to help people making decision when they are in disaster. So the disaster relief decision support system must offer proper information of crisis management focused on people, place, and process. One of the main features of software is the relationship modeling of essential factors such as number of people, houses, budget, time, and space. This automatic temporary houses generation and space planning is simulated for land use and layout plan design with cost estimation analysis. The system components were proposed to a new disaster relief system in alternative approach. Using community-based development will not cost budget but required people participation. Our software’s space coordination will start and centered from available space in school or temple with sufficient infrastructure. After essential factors are inputted, appropriated number of temporary houses, public facilities, and management guideline will be generated to support further planning decision. Our core system was developed on Java and Swing Technology, empowered by real-time 3D rendering CAD engine. In addition, “Virtools” as our Authoring Tools was applied to improve design interaction and explore rapid software prototyping. At the end, we discuss the comparison between real situations in Thailand and appropriate design standardization, which should be reconsidered how to manage crisis with the limitation of time and budget from government.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_093
id	ecaade2007_093
authors	Nicholas, Paul; Bahoric, John; Ormston, Garry; Bowtell, Peter; Burry, Mark
year	2007
title	No Place for Drones
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 117-123
doi	https://doi.org/10.52842/conf.ecaade.2007.117
summary	Building design is a process often divorced from considerations about construction. Digital design methods are increasingly challenging the historic relationship between architecture and its means of production, but this extended reach is not necessarily accompanied by extended understanding or leverage of the production process. We present an urban sculptural project, The Travellers, in which digital techniques resolved critical issues of design, documentation and fabrication, but more importantly facilitated highly beneficial processes of negotiation. We suggest that this case based research has implications for future interactions between designers, makers and managers, shedding additional light onto issues of negotiation, responsibility, risk and trust that are often critical to the pragmatic undertaking of making.
keywords	Design integration, digital design, fabrication, negotiation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	eaea2009_piga
id	eaea2009_piga
authors	Piga, Barbara E.A.
year	2011
title	The Urban Simulation and Projects Evaluation Laboratory at the Politecnico di Milano: An Educational and Research Facility
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 115-120
summary	At the beginning of 2007 an Italian Urban Simulation Laboratory was founded at the Politecnico di Milano. The laboratory, coordinated by prof. Fausto Curti, has been developed thanks to the one year presence of the visiting professor Peter Bosselmann, director of the Environmental Simulation Laboratory at the University of California at Berkeley. The laboratory has an interdisciplinary approach and a threefold mission: experiment, using the laboratory setting to study urban projects at different scales; communicate, aiding public communication by making urban projects understandable to everyone; integrate and innovate, working on different kind of simulations techniques in an integrated way. In its initial experience the laboratory is primarily a didactic and research facility. Students can join the work and participate actively to the research. Until now about 40 students have worked with us, more than a half were foreign students from all over the world. The majority of the students did an internship of about 150 (three-year degree) or 300 (master degree) hours and some of them have continued working after this period developing a thesis. At the moment the case study, used as a pilot research, is about the Porta Nuova project at the Garibaldi- Repubblica area in Milan. The 300.000 mq of the total area and its well served central position make this place strategic for Milan. In this area the adopted urban transformation plan is creating a new business center that affects redevelopment projects, new infrastructures, and a park. The overall project will overhanging the surroundings city center with some of the highest buildings of its skyline. The importance of the site and the dimension of the project make this case significant to test the use of simulation for supporting evaluations about morphological aspects, comfort conditions, visual impacts, and other aspects that directly influence the quality of the new urban spaces. We are now applying different simulation methodologies in order to better understand the peculiar usefulness of each kind as a tool to support evaluation. As any kind has its own limits we work with different typologies at the same time. We are working with 1:500 scale physical model of a 1 km square of the area and different kind of static and dynamic simulations. We developed, with an external office, a micro-car to move a micro-camera in the maquette. We use this equipment to better explain the project implications to the students by producing subjective shot videos or showing a walk in real-time. To reproduce in a better way some relevant walks through the transformed site we have also produced some videos made of a superimposition of the real existing context and the virtual projects. To do this we used a rendered video of the project superimposed to the filmed promenade of the today condition, previously recorded using steadycam. A lot of static simulations has been employed to better understand the new city configuration from some representative points of view, as for example the roof of the Duomo cathedral. We are now developing some other kinds of analysis such as shadows impact; this is done by using a 1:1000 scale maquette in the Heliodon, but also with some digital tools. In the next future a work with the wind tunnel will help to understand some other comfort implications of the project at the micro-urban scale. The multilayer approach is the main aim of the laboratory and is an important tool to clarify the multidimensional project impacts to the students. In this way the laboratory can be a learning tool, it can stimulate the project process and support decision-making while improving the knowledge about the correct use of simulations for evaluating the cumulative implications of the proposed urban processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	cf2009_poster_31
id	cf2009_poster_31
authors	Tan, Beng-Kiang and Stephen Lim Tsung Yee
year	2009
title	Place-Making In Online Virtual Envionment: The Case Of Second Life
source	T. Tidafi and T. Dorta (eds) Joining Languages Cultures and Visions: CAADFutures 2009 CD-Rom
summary	With Internet bandwidth becoming better and more affordable, coupled with rapid advancement in web technology, multiuser online 3D virtual environments have become a reality and increasingly popular. One such world, Second Life (launched in 2003), has 2.3 million “residents” living in their virtual platform as of January 2007. The residents “live”, work and play there. They also socialize in public spaces inside this virtual environment.
keywords	Virtual world, virtual environment, second life, place
series	CAAD Futures
type	poster
last changed	2009/07/08 22:12

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia07_146
id	acadia07_146
authors	Angulo, Antonieta
year	2007
title	Ubiquitous Training of Visual-Spatial Skills: On the Development of Mobile Applications Using Handheld Devices
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 146-155
doi	https://doi.org/10.52842/conf.acadia.2007.146
summary	This research project seeks to develop m-learning applications that provide training in visual-spatial skills using wireless handheld mobile devices (e.g. PDAs and cellular phones). The paper acknowledges the role of visual-spatial competence as fundamental in science and most creative endeavors, including its critical role in architectural design. It also recognizes that there is a substantial amount of anecdotal evidence suggesting that undergraduate students in architecture have serious limitations in applying visual-spatial skills for design activities. A potential solution to this problem is envisioned through the introduction of extra-curricular learning activities that are ubiquitous and learner-centered. The suggested m-learning applications will include a set of instructional modules making use of media-rich representations (graphics and animations) for conveying the nature of 3-D spaces. As a first step toward reaching this development, a prototype was created and used for testing learning strategies. This experiment provided evidence regarding improvements to specific aspects of the students’ visual-spatial competency, and it also collected qualitative feedback regarding the students’ level of satisfaction about the learning experience. The paper provides recommendations for a future implementation of the beta version, including the learning strategy, content authoring, publishing, deployment, and criteria for the selection of the most accessible mobile device.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	sigradi2011_290
id	sigradi2011_290
authors	Azevedo de Oliveira, Fabiana Mabel
year	2011
title	Redes sociotécnicas: a concepção de uma interface [Sociotechnical network: design of an interface]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 568-570
summary	This paper aims to examine the forms of representation of the processes of creation of Web interfaces for platforms. Its origin is associated with a proposal that understands the new communications technologies, specifically the Internet, and the possibility of formation of a sociotechnical network, as a tool to expand the ways of social interaction (Egler, 2007). Increasing access to information and communication, making the process more open, redefining the relationships and social exchanges, and allowing its mediation by digital processes.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2007_045
id	ascaad2007_045
authors	Bazlamit, R. and M. Verma
year	2007
title	Nature Replay: An immersive installation
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 571-586
summary	This project aims at addressing playgrounds and their utilization in current urban scenarios, in developing and under-developed countries. It experiments with digital technology to re-create a play space wherein children can actively engage with each other and the space utilizing upon a unique medium of play. As playgrounds have traditionally always been situated within a natural habitat or environment, this further reinforces the concept of developing the idea- based on something closely related to nature. Working around notions related to nature, music and how can children play around them; conceptualized ‘Nature rePlay”; an immersive environment making use of interactive digital media in both real urban settings and performing arts.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2007_032
id	ecaade2007_032
authors	Bridges, Alan
year	2007
title	Scenario-based Design
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 441-446
doi	https://doi.org/10.52842/conf.ecaade.2007.441
summary	The concepts underlying “scenario-based” design are introduced and put forward as a computationally-supportable alternative to sketching in early-stage design. From the analysis of a number of structured interviews with practicing designers, key design scenarios are identified. These scenarios are then generalised and outline guidelines developed for structuring early stage design, making use of TRIZ methodologies.
keywords	Scenario, TRIZ, architectural design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_174
id	ecaade2007_174
authors	Carrara, Gianfranco; Fioravanti, Antonio
year	2007
title	X-House – A Game to Improve Collaboration in Architectural Design
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 141-149
doi	https://doi.org/10.52842/conf.ecaade.2007.141
summary	The current research we are conducting refers to a general model of architectural design. The complexity of the present-day design process is such that new ICT tools are required to consciously and appropriately govern the design choices. In particular, the tools that involve the early phases of the design process, when the choices crucial to the entire building process are made. In this perspective we are developing, together with a general model of architectural design based on Collaborative Design (CD), a simplified version of it – the _-House game – that can be used to help university students appreciate the complexity of doing architecture and building. This “simplified version” of the general model is therefore a useful ‘design training tool’ in the case of complex problems that can be solved by means of iterations, trade-offs, creativity, and group work; and at the same time makes it possible to highlight, define and link relatively little known aspects of design, such as scheduling, relations among operators, decision-making mechanisms, and process and design priorities.
keywords	Collaborative design, game, research and education, web based design
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:55

_id	cf2007_373
id	cf2007_373
authors	Chan, Chiu-Shui
year	2007
title	Does Color Have Weaker Impact on Human Cognition Than Material?
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 373-384
summary	This project intends to develop a method for using virtual reality (VR) to represent a built environment for simulating environmental influences on occupants. Objectives of the project were to explore: (1) what environmental stimuli would affect habitants’ perception, and (2) what possible factors in the built environment would affect occupants’ cognition. An office was selected as the subject of study. Methods were to create a number of digital models, each containing an embedded variable, and then test the impact of environmental influences on visual perception. Results obtained in this study indicate that materials have stronger impact to human perception than colors, and VR has great potential for design decision making and post-occupancy evaluation.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	acadia07_104
id	acadia07_104
authors	Chen, Chien-Lin; Johnson, Brian R.
year	2007
title	DVIN: A Dual View Information Navigation System
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 104-109
doi	https://doi.org/10.52842/conf.acadia.2007.104
summary	Differences in the preferred modes of representation of architects and their clients create challenges to their collaboration in the design process. Traditional two-dimensional drawings such as plans, sections and elevations form the backbone of architectural representation, anchoring text labels to record relevant non-graphical information. Nominally geometric “slices” through the proposed building volume, these drawings employ abstractions and conventions unique to professional practice. In contrast, non-architects think about building configuration largely through experiential or photographic perspective. This challenge increases over the life of the project. Simple drawings, such as those used in schematic design, are easily understood by all parties. However, as the building design develops the architects encode more and more design detail through the drawing conventions of construction documents, inadvertently making this detail less and less accessible to non-architects. We present DVIN, a prototype system that uses coordinated plan and perspective views for navigation of building information models, linking the information to an individual’s spatial navigation skills rather than their document navigation skills. This web-based application was developed using Java and VRML. The prototype makes it easier for naive users to locate and query building information, whether they are a client, a facility manager, or possibly an emergency responder. * NOTE: two pages missing from the printed proceedings have been appended to the PDF version of this paper and numbered 'erratum page 1' and 'erratum page 2' *
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2007_273
id	caadria2007_273
authors	Chitchian, Davood; H.C. Bekkering
year	2007
title	Sustaining Design Decision Makers in the AEC industry
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.w3a
summary	Today’s typical decision making problem such as strategic planning, portfolio analysis, resource allocation and human resource management involves a variety of tangible and intangible strategic goals, conflicting constraints, dozens or hundreds of alternative initiatives to be pursued, and limited resources. A decision maker cannot meaningfully combine all of this information to make right decisions. To sustain decision makers in the Architecture, Engineering and Construction (AEC) industry, this paper proposes a tool to transfers a complex problem into a concept of hierarchical structure consisting of goal and its criteria and sub-criteria. Irrespective of the applied domains, this tool provides a flexible means for tackling the complex decision making process. It embeds a mathematical model for prioritization and decision making which is based on the Analytical Hierarchy Process (AHP).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2007_af56
id	sigradi2007_af56
authors	Dorta, Tomás
year	2007
title	Ideation and Design Flow through the Hybrid Ideation Space [Ideación y flujo de Diseño a través de un Espacio de ideas Hibrido]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 418-422
summary	This study assesses an innovative immersive sketching and model making system: the Hybrid Ideation Space (HIS). The system enables designers to sketch and make models all around them in real-time and real scale using a digital tablet (sketches), image capture (physical models) and a spherical projection device (immersion). We carried out an experiment to evaluate this system using the concept of Design Flow and workload with industrial design students working in teams during the ideation stage of the design of a car. The HIS was compared to analog tools and hybrid techniques.
keywords	Ideation; Flow; Sketches; Models; Immersion
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia07_056
id	acadia07_056
authors	Dritsas, Stylianos; Becker, Mirco
year	2007
title	Research & Design in Shifting from Analog to Digital
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 56-65
doi	https://doi.org/10.52842/conf.acadia.2007.056
summary	In this paper we track the evolution of computational design from its analog origins to its contemporary digital regime. Our long term goal is to qualify and quantify the implications of digital computation on design thinking and its influence on the architectural practice. Meanwhile, we present the results of our past few years of collaborative research in design and computation that illustrate the nature of the intellectual engagement required for appreciating the potential of digital design thinking and making. In a temporal frame, these results are expressed as a constellation of punctuated innovations emerging sporadically during the painstaking process of tackling architectural problems using digital means. In the long run, they hopefully amount to an approach to fleshing out a paradigm shift from analog to digital and building a knowledge foundation of architectural methods.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	cf2007_585
id	cf2007_585
authors	Fischer, Thomas
year	2007
title	Enablement or Restriction? On supporting others in making (sense of things)
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 585-598
summary	In this paper I present and reflect upon a five-year investigation of designing digital tools for designing in the area of architectural space grid structures. I understand design as a novelty and knowledge generating conversational process as described by Pask (see Scott 2001) and Glanville (2000). Furthermore, I regard making design tools as a design task in itself, rendering this paper a reflection on designing for designing. This paper gives a report on observations I made during the toolmaking study, and subsequently contextualizes these observations using second-order cybernetic theory. This reflection focuses on different relationships between observers and systems, on conditions under which observers construct knowledge and on limits of supporting others in this activity.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	be0c
id	be0c
authors	Hamza N, Horne M
year	2007
title	An operational model for teaching low energy architecture
source	Building and Environment Volume 42, Issue 11, November 2007, Pages 3841-3847 July 2007
summary	Awareness of the need to integrate sustainability at all levels has recently been gaining momentum in education to meet pedagogical university policy, government and employers’ expectations. Within the school of the Built Environment at Northumbria University an integrated course delivery has been adopted for second year students. This proposal intends to disseminate an operational model for integrating teaching and assessment between three modules which have traditionally been taught and assessed separately to achieve a low-energy house.
keywords	low-energy architecture, virtual reality, integrated curriculum, project decision making, mapping learning outcomes
series	other
type	normal paper
email
more	http://dx.doi.org/10.1016/j.buildenv.2006.11.003
last changed	2008/03/14 00:25

For more results click below: