Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2019_663
id	caadria2019_663
authors	Gaudilliere, Nadja
year	2019
title	Towards an History of Computational Tools in Automated Architectural Design - The Seroussi Pavilion Competition as a Case Study
doi	https://doi.org/10.52842/conf.caadria.2019.2.581
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 581-590
summary	The present research proposes a method to analyse computational tools at the architect's disposal and the potential technical bias they induce in architectural design. Six case studies will be used as a demonstration of the method's ability to highlight those biases and how architects and designers manipulate those tools to translate their architectural expertise into algorithmic design. Those case studies are the six answers to the Seroussi Pavilion competition, organized in 2007 by Natalie Seroussi, a Parisian gallery owner. Having a keen interest into computational design, she invited six architectural practices specializing in this field. As the six case studies answer the same design brief, it represents a particularly suitable opportunity to analyse the intricate relationship between architectural constraints, their translation into computational data and instructions and the programming tools used to do so. Through the analysis of four different aspects of the project - algorithmic tools/method, computational set-up, organizational chart and architectural design - several issues of the computational turn in architecture are discussed.
keywords	digital heritage; computational design tools; architectural constraints; programming-based spatial design; Seroussi pavilion competition
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
doi	https://doi.org/10.52842/conf.acadia.2007.040
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	acadia11_372
id	acadia11_372
authors	James, Anne; Nagasaka, Dai
year	2011
title	Integrative Design Strategies for Multimedia in Architecture
doi	https://doi.org/10.52842/conf.acadia.2011.372
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 372-379
summary	Multidisciplinary efforts that have shaped the current integration of multimedia into architectural spaces have primarily been conducted by collaborative efforts among art, engineering, interaction design, informatics and software programming. These collaborations have focused on the complexities of designing for applications of multimedia in specific real world contexts. Outside a small but growing number of researchers and practitioners, architects have been largely absent from these efforts. This has resulted in projects that deal primarily with developing technologies augmenting existing architectural environments. (Greenfield and Shepard 2007)This paper examines the potential of multimedia and architecture integration to create new possibilities for architectural space. Established practices of constructing architecture suggest creating space by conventional architectural means. On the other hand, multimedia influences and their effect on the tectonics, topos and typos (Frampton 2001) of an architectural space (‘multimedia effects matrix’) suggest new modes of shaping space. It is proposed that correlations exist between those two that could inform unified design strategies. Case study analyses were conducted examining five works of interactive spaces and multimedia installation artworks, selected from an initial larger study of 25 works. Each case study investigated the means of shaping space employed, according to both conventional architectural practices and the principles of multimedia influence (in reference to the ‘multimedia effects matrix’) (James and Nagasaka 2010, 278-285). Findings from the case studies suggest strong correlations between the two approaches to spatial construction. To indicate these correlations, this paper presents five speculative integrative design strategies derived from the case studies, intended to inform future architectural design practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia07_230
id	acadia07_230
authors	Qian, Cheryl Z.; Chen, Victor Y.; Woodbury, Robert F.
year	2007
title	Participant Observation Can Discover Design Patterns in Parametric Modeling
doi	https://doi.org/10.52842/conf.acadia.2007.230
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 230-241
summary	Our research aims to understand the mid-level patterns of work that recur across designers and tasks. Our users comprise active architects and civil engineers. The hypothesis is that making such patterns explicit will result in improved expert work practices, in better learning material and suggestions for improvements in parametric design. The literature shows that patterns express design work at a tactical level, above simple editing and below overall conception. We conducted a user experience study based on Bentley’s GenerativeComponents, in which geometry can be related, transformed, generated, and manipulated parametrically within a user-defined framework. After interviewing the system’s chief, we ran a participant-observer study in the January 2007 SmartGeometry workshop. We engaged designers through the role of tutor and simultaneously observed and discussed their design process. We found clear evidence of designers using patterns in the process and discerned several previously unknown patterns. In February at another 10-day workshop, we found more evidence supporting prior findings. The paper demonstrates that participant observation can be an efficient method of collecting patterns about designers’ work and introduces such new patterns. We believe these patterns may help designers work at more creative levels and may suggest new ideas of interest to CAD application developers.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	16fe
id	16fe
authors	Abdelmohsen, Sherif; Do, Ellen Yi-Luen
year	2007
title	Tracking Design Development through Decomposing Sketching Processes
source	Digital proceedings of the International Association of Societies of Design Research (IASDR 2007), Emerging Trends in Design Research, Hong Kong Polytechnic University School of Design, Hong Kong.
summary	We conducted a protocol study of the architectural sketching process. We decompose the process into process flows to explore the extent to which it expresses concept development in schematic and refined design phases. We track the development of design concepts in these phases by following the process flows of individual sketched strokes. We argue that each stroke drawn by the designer reveals a probability of an embedded concept, and that this concept is either promoted and propagated throughout the design phases, or blocked while designing. We expand the notion of lateral and vertical transformation in design by introducing a set of processes described as cross propagation, lateral promotion and vertical promotion.
series	other
type	normal paper
email
last changed	2010/01/30 07:19

_id	ascaad2007_035
id	ascaad2007_035
authors	Al-Ali, A.I.
year	2007
title	Readiness for the Use of Technology for effective learning via the vds: Case of the United Arab Emirates
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 439-456
summary	Review of the literature indicated that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes such as problem solving, meta-cognitive skills, critical thinking and lifelong learning. Such skills can be acquired if learning and teaching are guided by the constructivist and cognitive learning theories. In particular, the constructivist approach emphasises effective learning processes based on learning by doing and collaboration. This approach is congruent with use of technologies, such as Virtual Design Studio (VDS), for the purpose of architecture education in design courses, but such use is lacking in the United Arab Emirates (UAE). It is thus important to assess the extent to which the constructivist and cognitive theories are implemented in teaching design courses in the Architecture schools of the UAE. It is also important to assess the effectiveness of employing technology in general and VDS in particular in implementing these theories. The author intends to study the relationship between effective learning on one hand and using VDS in implementing the constructivist and cognitive approaches on the other hand. Thus, the author conducted a preliminary study to gain a basic understanding of the difficulties, approaches, attitudes, perceptions, and motivation related to the learning of design in architecture schools in the UAE. Second, the investigation was designed to assess the extent to which the students would be interested in the use of sophisticated technology in the teaching and learning environment in the UAE architecture education schools in order to achieve effective learning. The study has been conducted in the United Arab Emirates University (UAEU). Methodology used for this was the focus group method. In addition to the focus group interviews with the UAEU students, unstructured individual interviews with lecturers from UAEU and the American University of Sharjah (AUS) have been carried out. Data analysis showed that students were not satisfied with the current teaching methods based on traditional lectures. It was concluded that students were ready to practice effective learning of design via the intermarriage of VDS and the constructivist and cognitive approaches. An ambiguity that remained was whether students were ready for assessment methods which are consistent with the constructivist approach.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_034b
id	ascaad2007_034b
authors	Ambrose, M.A.
year	2007
title	Body\|Form\|Space: Geometric translations of the body in motion
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 431-438
summary	This paper presents a novel approach to digital investigation of body, space, form and motion to expose issues of spatial perception. The spatial experience as generated from, and translated by, the human body is the focus of this work. The work explores the representational value of the body’s sense-image, the context and spatial/visual literacy of the learned sense of space-time generated from the study of the human body. Here the body is conceived not just in space but also in time, affording the ability to reinterpret the body and it’s dynamic motion engaged not as a static condition, but as a set of event spaces. Motion here is defined as a multiplicity of continuities that can be subdivided by artificial boundaries that describe space, time and body. The study of a series of bodies and movements is described that explore the human condition as a series of differential lines (form + time) and framed structures (bodies + motion). The intention is to examine the relationship between human form and metaphysical simultaneity as generators of architectural form. The work is structured by a research approach that dissects and isolates the representational concept/image from the body in a way that might offer an alternative description to the traditional historic models.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ecaade2007_164
id	ecaade2007_164
authors	Barrios, Carlos Roberto; Lemley, Christina
year	2007
title	Expanding Design Boundaries
doi	https://doi.org/10.52842/conf.ecaade.2007.483
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 483-489
summary	This paper presents a research in progress on the use of simple block units for exploratory design of complex patterns. The research explains how to use symmetry rules to expand the design language of Frank Lloyd Wright’s textile block houses. The paper shows a case study of how a single unit can be used to generate complex patterns and intricate arrangements.
keywords	Design variations, symmetry, design boundaries, random design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_088
id	ecaade2007_088
authors	Bechthold, Martin
year	2007
title	Teaching Technology: CAD/CAM, Parametric Design and Interactivity
doi	https://doi.org/10.52842/conf.ecaade.2007.767
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 767-775
summary	The paper discusses a project-based approach to technology teaching, and examines the case of the mobile information unit (MIU) for Harvard University and its art museums. A student competition was held to explore design alternatives for this unit. The winning entry proposed an interactive, pixilated fiber-optics display as well as touch screens. Parametric digital modeling was used in the design and design development of the scheme. Research included the study of structural alternatives, fabrication methods and the modes of interaction between users and the MIU.
keywords	Computer-aided design and manufacturing, fabrication, simulation, prototype, fiber optics
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_012
id	ecaade2007_012
authors	Benoudjit, Moamed Amine; Coates, Paul S.
year	2007
title	Artificial Networks for Spatial Analysis
doi	https://doi.org/10.52842/conf.ecaade.2007.911
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 911-918
summary	The present paper aims to present a summary of my ongoing PhD research, which is concerned with the study of the possibilities of developing an analytical and design tool based on artificial neural networks (ANN) and other Artificial Intelligence (AI) and connectionist algorithms.
keywords	Space, classification, artificial neural networks, cellular automata
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2007_af03
id	sigradi2007_af03
authors	Bernal, Marcelo; Paul Taylor
year	2007
title	Conocimientos locales [Local Know How]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 285-289
summary	The main objective of this work developed at the Architecture Department of Universidad Técnica Federico Santa Maria, was develop and design tectonic systems from inquiring how laws that rule matter can inform and integrate a digital modeling process, elaborating modeling routines that express heterogeneity of matter and develop the potential of local fabrication process. This study combines digital modeling and very simple handcrafting techniques, based on simple rules and material properties.
keywords	Digital; tectonics; parametric; modeling; material
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2007_215
id	ecaade2007_215
authors	Boytscheff, Constantin; Sfeir, Marilu Kanacri
year	2007
title	Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
doi	https://doi.org/10.52842/conf.ecaade.2007.091
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
summary	The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords	Urban planning, virtual reality, immersive, teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac20075305
id	ijac20075305
authors	Cabral, Claudia Pianta Costa
year	2007
title	ZOOM-IN, ZOOM-OUT: Architectural scale and digital technology
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 523-534
summary	This paper aims at contributing to the study of the relationship between technology, knowledge and representation. It is based on previous studies on architecture, art and technology in modernity and its development, as well as on studies about scale in architectural design. In despite of the fact that scale can be technically considered indifferent for computer-aided design, I intend to discuss how digital tools intercede in the process of clipping that selecting a specific scale eventually implies sustaining that, for architectural design, the concept of scale has to do both with representation and with knowledge of reality.
series	journal
last changed	2007/11/20 18:06

For more results click below: