Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2007_011
id	ecaade2007_011
authors	Tessmann, Oliver
year	2007
title	Structural Analysis as Driver in Surface-based Design Approaches
doi	https://doi.org/10.52842/conf.ecaade.2007.109
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 109-115
summary	This ongoing research argues for novel strategies to integrate structural analysis data in an architectural design approach. Instead of a linear procedure of synthesis, analysis and post-rationalisation a synthesis/analysis loop is installed that uses structural analysis data as design driver from early on. The approach is not aiming for a pure force-driven form-finding or optimization process but regards structural performance as one design criteria among others. Equilibrium between multiple parameters is aspired instead of a single-parameter-optimum. The research is conducted by a custom-made digital interface between a 3d modelling software and an application for structural analysis of space frames structures. Surfaces are translated into meshes with supports at user-defined nodes and then exposed to its dead load in the structural analysis software. The resulting nodal deviation is feed into an algorithm that steers the appropriate reaction towards the local stresses and deviations, taking into account the mesh topology, its supports and their position in the mesh. The initial mesh is optimized in shape transformed back into a double-layer surface model in the 3d software which evolves into an interconnected two-layer space frame. An instant feedback from synthesis to analysis and vice versa is installed. Analysing techniques migrate into the realm of synthesis.
keywords	Optimization, collaborative design, structure and surface
series	eCAADe
email
last changed	2022/06/07 07:58

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	caadria2007_057
id	caadria2007_057
authors	Kouide, Tahar; G. Paterson
year	2007
title	BIM as a Viable Collaborative Working Tool: A Case Study
doi	https://doi.org/10.52842/conf.caadria.2007.x.l1j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	For the majority of design practices in the construction industry the use of CAD systems have been used to merely automate hand drafting (Cohen 2003). This is the traditional way of working that has changed very little since the introduction of commercial CAD systems. These practices as means of communication are being replaced by a virtual building model environment which encapsulates all of the information for an entire construction project and thereby enables computer-supported co-operative working practices. (Newton 2003) This study aims to determine whether Building Information Modelling (BIM) can, and whether it will, replace traditional communication media as the standard in the industry for computersupported co-operative working practices in the Architecture Engineering and construction (AEC) sector. The bulk of the research comprises an extensive literature review looking at the principal reasons behind the development of BIM, the potential advantages and drawbacks of the technology, and the barriers and obstacles which inhibit its adoption as a means of computer-supported co-operative working. The findings of the study have been validated and analysed against current practice in the field through a live case study analysis of the on-going Heathrow airport Terminal 5 Project in London (UK). The Terminal 5 case study demonstrates that present software tools, although usable, still present significant implicit technical constraints to wider implementation among Small and Medium Enterprises (SMEs). The case study has also shown that in practice, the success of BIM depends just as much on the working practices and ethos of participants in the project chain as it does on the capabilities of the software itself, in particular the willingness of practitioners to change traditional working practices. The case study has shown that the present investment, in terms of time, cost, and effort required to implementing the technology means that BIM is unlikely to be adopted on small simple projects where conventional CAD is still adequate. It also highlighted that BIM tools currently available are not yet adequately developed to satisfy the requirements of the many procurement and especially contractual arrangements which presently exist and many firms will be frightened off by the unresolved legal issues which may arise from implementing BIM in their practices.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_022
id	ascaad2007_022
authors	Belkaid, A. and A. Ben Saci
year	2007
title	A multi-agent system for the formulation of architectural terms of references
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 261-272
summary	This work aims to use the multi-agent systems, permitting to coordinate the behavior of intelligent artificial agents, in order to help the architect at the first moments of the conception. We proceed by modelling the architectural terms of reference, using the concept of primary architectural system, to manage the initial information. This modelling process proposes a new formulation of this system based on the agent paradigm.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_233
id	caadria2007_233
authors	Hoseini, Ali Ghaffarian; Rahinah Ibrahim
year	2007
title	Using Social Network Analysis for Visualising Spatial Planning During Conceptual Design Phase
doi	https://doi.org/10.52842/conf.caadria.2007.x.i8r
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Spatial diagramming exercises with clients are difficult when most clients are not able to visualize the end results of their requirements. This paper would like to introduce a computational tool—Social Network Analysis (SNA)—commonly used in the communications field to study relationships between people we believe can resolve this visualization problem. Our research intent is to affirm whether or not we can use SNA as a spatial planning tool during conceptual building design. We posit that since the nodes and structural relationships between the nodes may have similar architectural characteristics, the tool would enable architects to make changes by moving any spaces on a floor plan while safely maintaining their spatial relationships to other spaces. In this paper, we would like to develop a proof-of-concept model using an available SNA tool to facilitate spatial diagramming visualization during conceptual design phase. We tested the use of a SNA tool at four levels. The first level determined whether we could develop spatial relationship between functional spaces (such as the living room must be adjacent to the front entry). The second level is on setting priorities values for the different nodes and the linkages. The third level determined whether we could develop grouping relationship between several functional spaces that have a common characteristic (such as public versus private spaces) on one horizontal plane. The final fourth level determined whether we could develop multiple layers that are connected by one common connector (such as a staircase in a double-story house). Our models are validated intellectually by visual comparison between our model and another diagramming by Nooshin (2001) that was developed manually. We are most interested in the fourth level because complexity in the spatial diagramming exercises is caused by multi-layered spatial arrangements at the horizontal and vertical planes. We expect our study to provide us guidelines in developing a prototype for a spatial diagramming tool using SNA, which architects can use to resolve visualization problems when conducting the exercise with their clients.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2007_000
id	sigradi2007_000
authors	Maganda Mercado, Adriana Gómez (et. al)
year	2007
title	Sigradi 2007: Communication in the Visual Society [La Comunicación en la Comunidad Visual]
source	Proceedings of the 11th Iberoamerican Congress of Digital Graphics Graphics / ISBN 13 978-968-7451-15-2] México D.F. - México 23-25 October 2007, 467 p.
summary	In a simple communication model we must talk about the understanding between participants. This is the result of a continuing connection and a dialog of agreements and disagreements in order to arrive at sharing an idea. However, society today is in an evolutionary lapse at an accelerated pace that interjects itself in this process. It is here where social forces distend and generate important ruptures between generations and individuals that fight to prevail or impose new languages and lifestyles. Today's society has become a visual society whose effect has been reinforced through technology in the devices that we use on a daily basis. The daily use of technology and its new languages has marked a disconnection between individuals that must be closed by using a new acculturation and teaching models. Disconnection is a omnipresent modern phenomenon that can be felt as the main effect in what specialists call the digital gap. This gap not only separates generations, but also ideologies with respect to the form in which we perceive, transmit and teach in our society today. This disconnection can be easily understood through a school system that has been designed for a manufacturing and agricultural world. However, many sectors within our society have been in state of constant change and evolution. This situation generates many opportunities where an agile society is required in response to these new local and global challenges. The students of today have, for example, multi-tasking abilities that better assimilate these changes. The researchers, Ian Jukes and Anita Dosaj refer to this disconnection as the result of poor communication between digital natives (our present-day students) and digital immigrants (many present-day adults). This phenomenon results in the fact that parents and educators speak the digital dialect as a second language, and because of that are lacking in their models of communication. For example, digital natives prefer a variety of sources with rapid access, while the digital immigrants prefer slower, more controlled sources that are limited and regulated. Nowadays, our educational or production activities in which we find ourselves immersed on a daily basis cause us to participate in a wide range of processes of production, dissemination and analysis of visual forms as part of our final product or service. Much of the work that we elaborate in movies, video and photography explore meaning, perception and communication in context as well as anthropological and ethnographic themes. Using this framework for our society today, the importance of the search for the promotion of the study of visual representation and the media for the greatest development and generation of benefits is brought to the fore. Through the use of images we can describe, analyze, communicate and interpret human behavior. All these settings, full of digital disconnections and reencounters, impact on all the visual aspects of culture, including art, architecture and material objects, influencing the bodily expressions of human beings. We have created a visual society when we put emphasis on the meaning and interpretation of all we receive through our visual sense. Wherever we look, we find objects that have been modified beyond their primary function to communicate messages. In this ecosystem we are consumers and suppliers. The communication and research needed to achieve reconnection, as well as the creation of new forms of production and visual understanding, are the themes on which the works contained in this edition are centered.
series	SIGRADI
type	normal paper
more	http://www.sigradi.org
last changed	2016/03/10 09:55

_id	ecaade2007_162
id	ecaade2007_162
authors	Ramirez, Joaquin; Russell, Peter
year	2007
title	Second City
doi	https://doi.org/10.52842/conf.ecaade.2007.359
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 359-365
summary	In the era of communication, the participation in internet-communities has grown to become a motor for innovation in software and community platforms. The paper describes the hypothesis that, by creating a virtual city (or a second city) a new type of social, economic and scientific network is established, which is supported through visual communication technologies. The various users bring, per se, their own intrinsic motivation and requirements to the system. Nonetheless, a personal identification with a city/neighbourhood/house/apartment can be used to awake awareness and to foster participation. This is especially important when dealing with the city inhabitants. City modelling itself has been carried out for over a decade. Projects such as the city model of Graz have shown how city models can be established so as to be scalable for new information (Dokonal et al 2000). Furthermore, these city models have been used in the education of future architects and urban planners. The project described here moves in the opposite direction: the model moves out of the classroom to an interdisciplinary city-model-platform. The work described here is the conceptual model for a multi-dimensional data set that models the city. This has spawned a host of other projects using the model as a foundation for further interactivity development and the extension of the model itself. The paper describes the structure of the conceptual model and the first experience of incorporating diverse projects such those mentioned above. The model also is structured so as to be compatible with the XML standards being developed for city information (CityGML). The goal of the project is to create a data set describing the city that not only describes the geometry, but also the history (including planned histories) and nature of the city. In contrast to virtual realities, which attempt to create a separate world (e.g. Second Life), the Second City is intended as an interdisciplinary repository for the geometrical, historical and cultural information of the city.
keywords	City modelling, virtual environments, web 2.0
series	eCAADe
email
last changed	2022/06/07 08:00

_id	032e
id	032e
authors	Schnabel, Marc Aurel; Bowller, Nicole
year	2007
title	Disparallel Spaces
source	Exhibition Catalogue, Tin Sheds Gallery at The Faculty of Architecture, Design and Planning, The University of Sydney, Sydney 2006, NSW, Australia, ISBN: 978-0-9581221-1-5
summary	DISPARALLEL SPACES is an architectural design exhibition showcasing creative digital design techniques at the Tin Sheds Gallery, Sydney, 24 May to 16 June 2007. It explores how the coupling of architectural design with digital modelling and fabrication methods allows for a deeper comprehension and experience of space and form. It confronts problems in architectural design from a diversity of multi-faceted and eccentric approaches, setting the trend for novel viewpoints of innovation and spatial design. It offers a unique opportunity to experience the digitalized future in the field of architecture. Work by Bachelor of Architecture students, curated by Damien Butler, Belinda Cowen, Patrick Keane, Zayad Motlib and Dr Marc Aurel Schnabel.
keywords	parametric design, scripting, algorithmic design, exhibition
series	book
type	normal paper
email
more	http://disparallelspaces.tk/
last changed	2007/12/17 05:33

_id	caadria2007_037
id	caadria2007_037
authors	Wutthikornthanawat, Worawut; Pinyo Jinuntuya
year	2007
title	Multi-User Tangible Interface for Public Participation Development of Low-cost Housing Project Design and Planning
doi	https://doi.org/10.52842/conf.caadria.2007.x.k4b
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper proposes the community-based computer aided design and cost estimation software development for low-cost housing project. The content attempts to create a new user interface system by participating access to multi-user tangible interface system for community members. To solve the problem of presentation media change form that watched through computer monitor or projector into conference surrounding creation about a requirements of collaborative design group on the surface using interactive drag and drop device according to suit the life style pattern of the housing. The method of design is as follow; developed using virtools® for design, planning and estimation overall project as define community planning, housing planning, construction, and appropriate financial capacity of the users that base on developed community sustainable.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_038
id	ascaad2007_038
authors	Bakr, A.F. and D. Saadallah
year	2007
title	Strategic planning through Mapping of Water pollution in Lack of information system utilizing geographic information system (GIS): Lake Maryout, Alexandria, Egypt
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 479-490
summary	Strategic planning always requests supporting tools to defeat lack of data problems, which is a common drawback in our planning system as a result of several reasons. This paper is an extensive overview of the recent application of Geographic Information Systems (GIS) in the domain of water contamination in lakes. The authors try to establish a GIS mapping technique, which is customized for Lake of Maryout in Alexandria city, Egypt demonstrating various GIS analysis techniques/approaches applied to a diversity of real-life engineering endeavors in the water contamination control management sector in a lack of data system. First, the reader is concisely acquainted with the major steps of utilized mapping technique and how they are conducted. Second, the technique would be applied to define degree of water pollution distribution in Lake of Maryout. Finally, the output maps would be analyzed to delineate a quick and long term strategy of solution.
series	ASCAAD
last changed	2008/01/21 22:00

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2007_273
id	caadria2007_273
authors	Chitchian, Davood; H.C. Bekkering
year	2007
title	Sustaining Design Decision Makers in the AEC industry
doi	https://doi.org/10.52842/conf.caadria.2007.x.w3a
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Today’s typical decision making problem such as strategic planning, portfolio analysis, resource allocation and human resource management involves a variety of tangible and intangible strategic goals, conflicting constraints, dozens or hundreds of alternative initiatives to be pursued, and limited resources. A decision maker cannot meaningfully combine all of this information to make right decisions. To sustain decision makers in the Architecture, Engineering and Construction (AEC) industry, this paper proposes a tool to transfers a complex problem into a concept of hierarchical structure consisting of goal and its criteria and sub-criteria. Irrespective of the applied domains, this tool provides a flexible means for tackling the complex decision making process. It embeds a mathematical model for prioritization and decision making which is based on the Analytical Hierarchy Process (AHP).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2007_af07
id	sigradi2007_af07
authors	Culagovski, Rodrigo
year	2007
title	Three dimensional isovist analysis method [Método de Análisis Tridimensional con isovistas]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 174-176
summary	This paper presents a three dimensional method of isovist analysis implemented in the MaxScript programming language. The script accepts as its input a standard three dimensional model of the buildings and terrain being analyzed, upon which a N×N grid is projected. Each square of this grid is assigned a height value, thereby producing a simplified surface description which is amenable to mathematical analysis. A three dimensional isovist is then generated for each grid square, by placing an observation point 1.5 meters above its center and finding the intersection of a series of rays from this point to the input model. The distance from the observation point to the intersection is summed over for all the angles studied giving a compound isovist measurement for the grid square under consideration.
keywords	Isovist; viewshed; analysis; model; volumetric; visibility
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	ascaad2007_052
id	ascaad2007_052
authors	Hamza, N. and M. Horne
year	2007
title	Building Information Modelling: Empowering Energy Conscious Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 661-670
summary	The increasing awareness of climate change and carbon dioxide emissions from the built environment is resulting in the need to visualize the environmental performance of buildings. One of the recent drivers in the UK has been the tightening of building regulations relating to energy consumption in buildings, mandating all buildings to be performance evaluated by accredited environmental simulation tools to test their carbon dioxide emission against set targets. Currently there is major confusion on all levels from architects to building control officers and contractors on how to engrain energy consciousness principles in the design and construction of buildings. Within this context, ‘Building Information Modelling’ that is linked to ‘Building Performance Modelling’ is increasingly being looked upon as a tool to facilitate the communication between the design team and contractors and to provide a transparent information model on the specification and targeted energy consumption of all new/ refurbished buildings to all parties involved. In this paper, analysis of the benefits and drawbacks of current efforts to combine those two comprehensive databases will be investigated. A sample of main software development companies, architects and contractors, using semi-structured interviews is undertaken to find out how Building Integrated Modelling (BIM) and Building Performance Modelling (BPM) can support the design and construction teams to deliver energy conscious buildings.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_423
id	caadria2007_423
authors	Holzer, Dominik; Mark C. Burry and Richard Hough
year	2007
title	Linking Parametric Design and Structural Analysis to Foster Transdisciplinary Design Collaboration
doi	https://doi.org/10.52842/conf.caadria.2007.x.c6q
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	The investigation presented in this paper focuses on the following questions: How can engineering and architectural expertise guide a process of digital optimisation and add structural ‘awareness’ in real time to aesthetic considerations (or vice versa)? How can building geometry be set up computationally in order to render it ‘sensitive’ to structural input? Which tools are required to foster this interaction? The authors of this paper form a team of researchers and practitioners from architectural and engineering background who combine their efforts to address the issue of interconnecting design intelligence across disciplines and advancing work methodologies in practice assisted by academic research. A live case study project is presented as a test scenario in order to find answers the above questions.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	6c08
id	6c08
authors	Horne M, Thompson E, Podevyn M
year	2007
title	An overview of virtual city modelling: emerging organisational issues
source	CUPUM07 10th International Conference on Computers in Urban Planning and Urban Management, Iguassu Falls, Brazil, 11-13 July 2007
summary	This paper presents a recent overview of the increasing use of Virtual Reality (VR) technologies for the simulation of urban environments. It builds on previous research conducted on the identification of three-dimensional (3D) city models and offers an analysis of the development, utilization and construction of VR city models. Issues pertaining to advantages, barriers and ownership are identified. The paper describes a case study of the development of a VR model for the city of Newcastle upon Tyne in the UK and outlines the role that academic institutions can play in both the creation and utilization of urban models. The study offers a new approach for the creation, management and update of urban models and reflects on issues which are emerging. Areas for future research are discussed.
keywords	city models, Virtual Reality, management, diversity, ownership
series	other
type	normal paper
email
last changed	2008/03/14 00:13

_id	9da7
id	9da7
authors	Jong, S J, Soon, E H and Rafi, A
year	2007
title	Exploring motion sequence of virtual characters: Experimenting motion-capture variables
source	Proceedings of the 2nd International Conference on Geometric Modelling and Imaging (GMAI 07), ETH Zurich, Switzerland, 4-6 July, 91-96.
summary	The purpose of the research is to study the detail of motion of various subjects with differences in physical attributes. The research outlines how different physique produces different behavioural patterns based upon mass and proportion. This research focuses on ‘walk motion’ to identify the differences in each subject’s physical attributes by sampling subjects of physical differences. This experiment employs Vicon8i® Optical Motion Capture system (MOCAP) to study the detail of human motion by extracting the subjects’ core motions for analysis with pre-defined actions. The research used the findings to establish the relationship between height and weight against motion frequencies in 3D space.
keywords	human motion, actor physique, motion capture, motion editing, core motion
series	other
type	normal paper
email
last changed	2007/09/11 02:31

_id	ecaade2007_177
id	ecaade2007_177
authors	Kaijima, Sawako; Michalatos, Panagiotis
year	2007
title	Discretization of Continuous Surfaces as a Design Concern
doi	https://doi.org/10.52842/conf.ecaade.2007.901
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 901-908
summary	The increasing trend in architecture to create unconventional forms opened up a new area of investigations in the employment of computational methods in design and construction. Our investigation is undertaken within a structural engineering firm, Adams Kara Taylor and focuses on finding ways to design structural solutions that respect criteria of efficiency, architectural intentions as well as intrinsic properties of the geometry. In this paper, we present various approaches on discretization where a project is presented as a continuous form, envelope or skin that must be subsequently subdivided in order to yield a framing or cladding solution compatible with different manufacturing, design and engineering considerations. The first part of this paper illustrates such a project where we applied and developed one of our discretization approaches. The second part of the paper focuses on generalization where we present a series of methodologies and corresponding software tools developed for the purpose.
keywords	Discretization, framing solution, structural analysis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2009_893
id	sigradi2009_893
authors	Kubicki, Sylvain; Annie Guerriero; Pierre Leclercq; Jean-Claude Bignon
year	2009
title	Cooperative design studios in education: Lessons learnt from two experiments
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article describes experiments of IT-supported cooperation in AEC pedagogical context. The Digital Cooperative Studio (SDC) places students in a situation of distant design cooperation. This experiment allows students to be confronted to a cross-disciplinary approach of the architectural design and leads to the analysis of their own cooperation processes. Two editions of the Digital Cooperative Studio have been carried out in 2007-2008 and 2008-2009. This article presents the lessons learnt from these two experiments.
keywords	Virtual Design Studio; Cooperation; Education; AEC (Architecture, Engineering and Construction)
series	SIGRADI
email
last changed	2016/03/10 09:54

For more results click below: