Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 541

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2010_049
id	caadria2010_049
authors	Fukuda, Tomohiro and Hitoshi Takeuchi
year	2010
title	Development of use flow of 3D CAD / VR software for citizens who are non-specialists in city design
doi	https://doi.org/10.52842/conf.caadria.2010.521
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 521-530
summary	The purpose of this study is the development of a tool by which citizens who are non-specialists can design a regional revitalisation project. Therefore, a 3D CAD / VR (3-dimensional computer-aided design / virtual reality) combination system was developed by using SketchUP Pro, GIMP, and UC-win / Road. This system has the advantages of low cost and easy operation. The utility of the system was verified as a result of applying the developed prototype system in the Super Science High School program for high school students created by the Ministry of Education, Culture, Sports, Science and Technology, Japan. It has been used for two years, since 2007. In addition, the characteristics of the VR made by the non-specialists were considered.
keywords	Urban renewal design; participatory planning; 3D CAD; VR; design by non-specialists
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	bsct_islami
id	bsct_islami
authors	Islami, Agron
year	2007
title	A Systematic Approach to Thermal Adaptation of Detached Single Family Buildings in Kosovo
source	Vienna University of Technology; Building Science & Technology
summary	The research focuses on thermal behaviour of non-insulated single detached family units in the region of Kosovo. The region has experienced a massive construction of illegal housing especially after the conflict of 1999. Such construction resulted in poor thermal behaviour of the houses due to the lack of insulation. The poor thermal behaviour resulted in degradation of thermal comfort for the inhabitants of the houses. This phenomenon occurs due to energy savings to heat the house or more accurately, a specific part of the house. The simulation is based on parametric studies in an hourly basis to compute the thermal behavior of three specific houses. The first simulation is performed on a non-insulated house whereas the other simulations are performed with improved thermal insulation in order to understand the importance of a thermal envelope and its impact in this type of houses. The generated results emphasize the energy savings if thermal envelope is improved in existing houses. Simulation program “TAS” was used to extract figures and numbers related to the cases.The research aims to inform the local population on possibilities for increasing the thermal performances of their houses by improvement of the thermal envelope. It raises the quality of living in their dwellings as well as the quality of the environment, subject to a considerable degradation caused by pollution, generated by the outworn power thermal power plants in Kosovo.
keywords	Building performance, Non-insulated house, Thermal comfort, Heating, Parametric calculations
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	cf2007_317
id	cf2007_317
authors	Mitchell, John; Justin Wong and Jim Plume
year	2007
title	Design Collaboration Using IFC
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 317-329
summary	This paper reports a study that has been undertaken as part of an on-going project to examine the capacity of building information modelling (BIM) techniques to support collaborative design in the building industry. In particular, our premise is that effective design collaboration relies on the ability to exchange BIM data in a robust way using an open information standard such as IFC. The focus of this present work has been on the processes involved in design collaboration between architects and engineers responsible for advising on thermal performance issues. We begin by looking at the kinds of data that needs to be exchanged to support such collaboration. We then test the exchange using a pilot project model and finally review the capacity of the IFC standard to support such processes.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	eaea2009_piga
id	eaea2009_piga
authors	Piga, Barbara E.A.
year	2011
title	The Urban Simulation and Projects Evaluation Laboratory at the Politecnico di Milano: An Educational and Research Facility
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 115-120
summary	At the beginning of 2007 an Italian Urban Simulation Laboratory was founded at the Politecnico di Milano. The laboratory, coordinated by prof. Fausto Curti, has been developed thanks to the one year presence of the visiting professor Peter Bosselmann, director of the Environmental Simulation Laboratory at the University of California at Berkeley. The laboratory has an interdisciplinary approach and a threefold mission: experiment, using the laboratory setting to study urban projects at different scales; communicate, aiding public communication by making urban projects understandable to everyone; integrate and innovate, working on different kind of simulations techniques in an integrated way. In its initial experience the laboratory is primarily a didactic and research facility. Students can join the work and participate actively to the research. Until now about 40 students have worked with us, more than a half were foreign students from all over the world. The majority of the students did an internship of about 150 (three-year degree) or 300 (master degree) hours and some of them have continued working after this period developing a thesis. At the moment the case study, used as a pilot research, is about the Porta Nuova project at the Garibaldi- Repubblica area in Milan. The 300.000 mq of the total area and its well served central position make this place strategic for Milan. In this area the adopted urban transformation plan is creating a new business center that affects redevelopment projects, new infrastructures, and a park. The overall project will overhanging the surroundings city center with some of the highest buildings of its skyline. The importance of the site and the dimension of the project make this case significant to test the use of simulation for supporting evaluations about morphological aspects, comfort conditions, visual impacts, and other aspects that directly influence the quality of the new urban spaces. We are now applying different simulation methodologies in order to better understand the peculiar usefulness of each kind as a tool to support evaluation. As any kind has its own limits we work with different typologies at the same time. We are working with 1:500 scale physical model of a 1 km square of the area and different kind of static and dynamic simulations. We developed, with an external office, a micro-car to move a micro-camera in the maquette. We use this equipment to better explain the project implications to the students by producing subjective shot videos or showing a walk in real-time. To reproduce in a better way some relevant walks through the transformed site we have also produced some videos made of a superimposition of the real existing context and the virtual projects. To do this we used a rendered video of the project superimposed to the filmed promenade of the today condition, previously recorded using steadycam. A lot of static simulations has been employed to better understand the new city configuration from some representative points of view, as for example the roof of the Duomo cathedral. We are now developing some other kinds of analysis such as shadows impact; this is done by using a 1:1000 scale maquette in the Heliodon, but also with some digital tools. In the next future a work with the wind tunnel will help to understand some other comfort implications of the project at the micro-urban scale. The multilayer approach is the main aim of the laboratory and is an important tool to clarify the multidimensional project impacts to the students. In this way the laboratory can be a learning tool, it can stimulate the project process and support decision-making while improving the knowledge about the correct use of simulations for evaluating the cumulative implications of the proposed urban processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	ecaade2007_215
id	ecaade2007_215
authors	Boytscheff, Constantin; Sfeir, Marilu Kanacri
year	2007
title	Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
doi	https://doi.org/10.52842/conf.ecaade.2007.091
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
summary	The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords	Urban planning, virtual reality, immersive, teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
doi	https://doi.org/10.52842/conf.caadria.2010.443
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2007_127
id	caadria2007_127
authors	Gu, Ning; L.F. Gül, M.L. Maher
year	2007
title	Designing within the Design: A Pedagogical Case Study of 3D Virtual Worlds in Design Education
doi	https://doi.org/10.52842/conf.caadria.2007.x.o1v
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Within most architecture and design schools, 3D virtual worlds are traditionally perceived and used as a CAAD tool for modelling and collaboration. Building on the understanding of virtual worlds as the extension of our physical environments where people can inhabit and participate in a variety of activities, we teach designing virtual worlds as a design subject which considers 3D virtual worlds as a different kind of environment design other than a technical tool for supporting design simulation and collaboration. This paper reports on our teaching experience, as well as discusses the principles for designing and teaching in 3D virtual worlds.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2007_233
id	caadria2007_233
authors	Hoseini, Ali Ghaffarian; Rahinah Ibrahim
year	2007
title	Using Social Network Analysis for Visualising Spatial Planning During Conceptual Design Phase
doi	https://doi.org/10.52842/conf.caadria.2007.x.i8r
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Spatial diagramming exercises with clients are difficult when most clients are not able to visualize the end results of their requirements. This paper would like to introduce a computational tool—Social Network Analysis (SNA)—commonly used in the communications field to study relationships between people we believe can resolve this visualization problem. Our research intent is to affirm whether or not we can use SNA as a spatial planning tool during conceptual building design. We posit that since the nodes and structural relationships between the nodes may have similar architectural characteristics, the tool would enable architects to make changes by moving any spaces on a floor plan while safely maintaining their spatial relationships to other spaces. In this paper, we would like to develop a proof-of-concept model using an available SNA tool to facilitate spatial diagramming visualization during conceptual design phase. We tested the use of a SNA tool at four levels. The first level determined whether we could develop spatial relationship between functional spaces (such as the living room must be adjacent to the front entry). The second level is on setting priorities values for the different nodes and the linkages. The third level determined whether we could develop grouping relationship between several functional spaces that have a common characteristic (such as public versus private spaces) on one horizontal plane. The final fourth level determined whether we could develop multiple layers that are connected by one common connector (such as a staircase in a double-story house). Our models are validated intellectually by visual comparison between our model and another diagramming by Nooshin (2001) that was developed manually. We are most interested in the fourth level because complexity in the spatial diagramming exercises is caused by multi-layered spatial arrangements at the horizontal and vertical planes. We expect our study to provide us guidelines in developing a prototype for a spatial diagramming tool using SNA, which architects can use to resolve visualization problems when conducting the exercise with their clients.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac20075109
id	ijac20075109
authors	Jachna, Timothy J.; Santo, Y.; Schadewitz, N.
year	2007
title	Deep Space
source	International Journal of Architectural Computing vol. 5 - no. 1, pp. 146-160
summary	The work described here explores the problem of how digital technologies can enrich the experience of spatiality and social interaction in space(s). An existing café space at the School of Design of the Hong Kong Polytechnic University is linked to a "twin" in the form of an online-accessible environment. Sensors and displays establish channels of communication between the virtual and the physical space, enabling on-site visitors to the café and online visitors to the website to share a spatial experience. The article explains the design of modes of communication between the spaces, outlining the theory and genesis of the project and discussing issues and principles in the design and realization of such spaces, including the interplay between the three-dimensionality of the physical space and the two-dimensional picture-plane-based monitor interface through which the website is experienced, as well as strategies for the transmission of spatial experience within the constraints of commonly-available hardware and software.
series	journal
email
last changed	2007/06/14 12:11

_id	ascaad2007_036
id	ascaad2007_036
authors	Pratini, E.F.
year	2007
title	Experimental Tools for the Teaching of Technical Graphics and Improving Visualization
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 457-468
summary	This paper presents an updated evaluation of an experience of applying computer graphics, virtual reality and Internet resources in the teaching of technical graphics at the University of Brasilia, Brazil. It differs from a previous paper (Pratini, 2004) for the addition of an overview of the course, the context and the new teaching methodology. It is an extended, more detailed paper, which includes examples, and closes with some results of surveys on the didactic material and the methodology. Our motivation for this experiment is the fact that most of the students have a lack of previous knowledge on the basis of drawings, resulting difficulties in both understanding and visualizing technical drawings. In this experiment, we introduced VRML 3D modeling in addition to CAD and regular pencil-and-paper drawings study and practice. To support the learning of this broad knowledge not present in the technical graphics bibliography, we first provided a website with animations and virtual reality resources. Since 2003 we are providing a CD-ROM containing all the former website material which is updated each semester. At the present time, the CD-ROM contains almost all the needed didactic material and software for the one semester technical graphics course. This experience was intended to improve and to support learning in a way that motivates the students, young people who are used to play video and computer games. Classes, website and CD-ROM material were conceived to take advantage of computers´ interactivity and animated resources. The use of computers´ technology and new media to support the learning resulted a new methodology and several new unanswered questions.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	b840
id	b840
authors	Schnabel, Marc Aurel; Wang, Xiangyu; Seichter, Hartmut; Kvan, Tom
year	2007
title	From virtuality to reality and back
source	INTERNATIONAL ASSOCIATION OF SOCIETIES OF DESIGN RESEARCH 2007 (IASDR07) ©School of Design, The Hong Kong Polytechnic University 2007 Core A, The Hong Kong Polytechnic University Hung Hom, Kowloon, Hong Kong Editor: Sharon Poggenpohl 12-15 November 2007 ISBN 988-99101-4-4 Digital Proceedings, Day 4, Session D: INTERACTION/INTERFACE
summary	There has been a growing research interest in investigating techniques to combine real and virtual spaces. A variety of “reality” concepts such as Virtual Reality and Augmented Reality and their supporting technologies have emerged in the field of design to adopt the task of replacing or merging our physical world with the virtual world. The different realities can be tailored to enhance comprehension for specific design activities along a design life-cycle. This paper presents state-of-the-art applications of these “reality” concepts in design and related areas, and proposes a classification of these realities to address suitability issues for the effective utilization of the concepts and technologies. Their potentials and implications in certain design activities are also discussed.
keywords	Mixed Reality, Augmented Reality, Virtual Reality, Augmented Virtuality, Mediated Reality, Amplified Reality, Virtualized Reality
series	other
type	normal paper
email
more	http://158.132.218.50:8000/
last changed	2007/11/15 20:58

_id	16fe
id	16fe
authors	Abdelmohsen, Sherif; Do, Ellen Yi-Luen
year	2007
title	Tracking Design Development through Decomposing Sketching Processes
source	Digital proceedings of the International Association of Societies of Design Research (IASDR 2007), Emerging Trends in Design Research, Hong Kong Polytechnic University School of Design, Hong Kong.
summary	We conducted a protocol study of the architectural sketching process. We decompose the process into process flows to explore the extent to which it expresses concept development in schematic and refined design phases. We track the development of design concepts in these phases by following the process flows of individual sketched strokes. We argue that each stroke drawn by the designer reveals a probability of an embedded concept, and that this concept is either promoted and propagated throughout the design phases, or blocked while designing. We expand the notion of lateral and vertical transformation in design by introducing a set of processes described as cross propagation, lateral promotion and vertical promotion.
series	other
type	normal paper
email
last changed	2010/01/30 07:19

_id	caadria2007_241
id	caadria2007_241
authors	Tse, Kenny T.C.; Andy Wong and Francis Wong
year	2007
title	Design Visualisation and Documentation withBuilding Information Modelling
doi	https://doi.org/10.52842/conf.caadria.2007.x.n0s
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Building Information Modelling (BIM) is an emerging technology in the architecture/engineering/construction industry. This paper presents a case study of the implementation of BIM at the precontract stage of a small scale in-door swimming pool project in Hong Kong. It aims at reviewing the workflow between consultants and the impacts on design visualisation, drawing documentation and bills of quantities. A practicable approach to transform designers’ traditional 2D drawings to BIM with the support from a BIM manager is unveiled. In addition to the results, this paper also highlights some issues such as hardware requirements, the shortfalls of the BIM tool and the supply and demand of skilled BIM personnel. There are other unanswered questions to be addressed in the near future.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_039
id	ascaad2007_039
authors	Bakr, A.F.; I. Diab and D. Saadallah
year	2007
title	Detecting Inefficient Lighting Solutions: Step-by-Step Geographic information system (GIS) Technique
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 491-504
summary	Outdoor lighting is used to illuminate roadways, parking lots, yards, sidewalks, public meeting areas, signs, work sites, and buildings. It provides us with better visibility and a sense of security. When well designed and properly installed, outdoor lighting can be and is very useful in improving visibility and safety and a sense of security, while at the same time minimizing energy use and operating costs. But, because nobody thought at this, most street lights shine light not only on the nearby ground, where is needed, but also miles away and skywards. Thus a large fraction of the light is lost, at consumer expense and without his/her consent. In the other hand, shortage in street light may cause more crimes as well as accidents. Most of the wasted or short light comes from the poorly designed street lights. Billboards, decorative lights, poorly shielded security lights are part of the problem too, but the main culprit for the waste and ugly glow one sees above one's head at nights is from the streetlights. Thus, recent computer technology gives us tools to be employed for testing the quality of light. Geographic Information System (GIS) software could be utilized to achieve that mission through applying mapping technique. This technique could analyze digital photographs and define light polluted areas as well as bad lighted. This paper reveals that step by step technique, which employs hybrid technologies to solve such problem for better planning decisions.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ecaade2007_139
id	ecaade2007_139
authors	Lonsing, Werner
year	2007
title	Combining GPS and CAD
doi	https://doi.org/10.52842/conf.ecaade.2007.655
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 655-661
summary	Combining CAD and GPS in architecture is a challenging task. Both technologies have not much in common. While GPS is used for mapping, CAD is used for modeling and virtual constructing. The request to design an application, the AmbiViewer, which can be used as design tool in an outdoor environment, brought the technologies together. This paper gives an overview about the GPS-technology and the integration into the modeling software.).
keywords	GPS, CAD, augmented reality, interactive modeler, graphic format
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ijac20075302
id	ijac20075302
authors	Neumann, Oliver; Schmidt, Daniel
year	2007
title	Innovative CNC Timber Framing - Technology and Cultural Expression
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 469-486
summary	he design-build project for the outdoor theater roof structure at the UBC Malcolm Knapp Research Forest at Maple Ridge, British Columbia, explores technical, spatial, and cultural aspects of CNC wood fabrication. References for the project are technological innovation and formal expression of contemporary wood structures. The roof project illustrates how spatial concepts are informed by the logic of fabrication and methods of assembly. A reciprocal relationship between technology, space, and locale suggests that the introduction of new technology coincides with new spatial concepts. Innovative design in this project is defined as work that resonates at the intersection of the fields of technology, material science, manufacturing processes, and techniques of assembly that constitute the expanded context that projects need to engage. It is through collaborative design research on CNC wood fabrication technologies that common design and building practice is put into question, and boundaries are explored and expanded.
series	journal
last changed	2007/11/20 18:06

_id	cf2007_115
id	cf2007_115
authors	Whiting, Emily; Jonathan Battat and Seth Teller
year	2007
title	Topology of Urban Environments: Graph construction from multi-building floor plan data
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 115-128
summary	This paper introduces a practical approach to constructing a hybrid 3D metrical–topological model of a university campus or other extended urban region from labeled 2D floor plan geometry. An exhaustive classification of adjacency types is provided for a typical infrastructure, including roads, walkways, green-space, and detailed indoor spaces. We extend traditional lineal techniques to 2D open spaces, incorporating changes in elevation. We demonstrate our technique on a dataset of approximately 160 buildings, 800 floors, and 44,000 spaces spanning indoor and outdoor areas. Finally, we describe MITquest, a web application that generates efficient walking routes.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	bsct_ahmeti
id	bsct_ahmeti
authors	Ahmeti, Flamur
year	2007
title	Efficiency of Lightweight Structural Forms: The Case of Treelike Structures - A comparative Structural Analysis
source	Vienna University of Technology; Building Science & Technology
summary	This work addresses the structural efficiency of lightweight tree-like structures for three case studies: Stuttgart Airport, Beaverton Library, and Thermal Bad Oeyenhausen. The case studies are simulated using Build simulation software, to determine the stresses induced in each structure. The material efficiency and shapes areexplored in terms of load bearing structures. Hybrids of the above structures are formed to compare the pattern morphology used by various types of tree-like structure and assess the structural behavior. In addition, (steel, wood and concrete) materials are compared to determine which would have better structural performance. In order to show the resemblance between the growing trees and the tree-like structures, an example of both cases is simulated and stresses evaluated. Results show that, in general, the minimum stress and deformations are obtained for steel. Structures made out of this material also exhibit higher load bearing capability, optimum stability factors and the best geometric efficiency, inspite of higher specific weight (10 times wood, and 3 times concrete).
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

For more results click below: