Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 547

Reformat results as: short short into frame detailed detailed into frame

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ecaade2007_173
id	ecaade2007_173
authors	Matcha, Heike
year	2007
title	Parametric Possibilities: Designing with Parametric Modelling
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 849-856
doi	https://doi.org/10.52842/conf.ecaade.2007.849
summary	We describe several projects in our ongoing research and teaching activities in the field of parametric design. The work is based on the premise that using parametric modelling and customized mass production for designing, planning and realisation, the creation of a spatially rich and varied architecture which is specific for individual programs, users and contexts is being made possible. We demonstrate this design approach by explaining three different design methodologies of various projects. The specifics and the experience of the use of various CAD software tools will be described: scriptable CAD programs like VectorWorks and CAD software with integrated parametric modelling like Unigraphics.
keywords	Parametric design, generative design, mass customisation, CAAD curriculum, digital aids to design creativity
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia07_242
id	acadia07_242
authors	Sanguinetti, Paola; Abdelmohsen, Sherif
year	2007
title	242 On the Strategic Integration of Sketching And Parametric Modeling in Conceptual Design
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 242-249
doi	https://doi.org/10.52842/conf.acadia.2007.242
summary	Architects perform problem-solving tasks while designing through various externalization modes. Among the architectural community sketching is associated with conceptual design, and parametric modeling is seen as a tool for detailed design development. However, parametric modeling is increasingly being used for exploring design concepts. We propose that sketching and parametric modeling can be integrated strategically as alternate externalization modes to support problem solving in conceptual design. With sketching, architects are able to externalize their ideas quickly and effortlessly, as the flexible structure of sketching provokes multiple interpretations through continuous refl ection. With parametric modeling, architects must define a set of parameters and rule-based constraints. By modeling design objects as parametric, multiple design variations can be generated, modifi ed, and evaluated. In this paper we describe an efficient process of problem-solving by studying the strategic use of sketching and parametric modeling in conceptual design. We conduct an experiment to explore the processes involved in both modes. Digital sketching is recorded by the Logitech io2 personal digital pen, and parametric modeling using Digital Project software is recorded by screen video capturing software, followed by a retrospective analysis. The ACADIA 2007 competition brief is used as the design task.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	cf2007_237
id	cf2007_237
authors	Schnabel, Marc Aurel
year	2007
title	Parametric Designing in Architecture
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 237-250
summary	Parametric design techniques offer obvious advantages for engineering and manufacturing processes, now architects emerge to apply these methods in their creation of design suggesting solutions at an earlier stage of the process. Through the coupling of architectural design with parametric modelling methods, the paper presents novel techniques that enhance architects' contribution to building processes based on parametric design creation. This allows a deeper comprehension of the design objectives and aids designers in their decisions to find solutions.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2008_4_session1a_036
id	caadria2008_4_session1a_036
authors	Coorey, Ben
year	2008
title	Erosive fluidity Exploration in generating digital architectural form
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 36-41
doi	https://doi.org/10.52842/conf.caadria.2008.036
summary	This paper explores emerging digital technologies and their application in architectural design. It investigates the tools and techniques that are currently available and produces some interesting work that is both inspiring and interesting. A series of three scenarios were explored via a digital design studio at the Faculty of Architecture, Design and Planning, The University of Sydney. The final work appeared in the ‘Disparallel Spaces’ exhibition, University of Sydney in May/June 2007. This paper will explain these scenarios and offer a look at some emerging trends in architectural design.
keywords	Parametric, Animation, Complexity, Responsiveness
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaade2007_050
id	ecaade2007_050
authors	Donath, Dirk; Böhme, Luis Felipe González
year	2007
title	Constraint-Based Design in Participatory Housing Planning
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 687-694
doi	https://doi.org/10.52842/conf.ecaade.2007.687
summary	The research presented in this paper deals with the yet unexplored development of a constraint-based design strategy to support participatory housing planning processes in Latin America. The article discusses the implementation criteria of a constraint satisfaction approach to solving the building bulk design problem. This elementary problem to the architecture practice, is concerned with the synthesis of the boundary geometry from the volume, shape and allocation of the building and any part thereof located inside a given zoning lot. A legal solution to a building bulk design problem is a building cubature that complies with all the applicable bulk regulations. The case study applies to the common class of single-family house units produced in Chile and the regulatory framework implemented there. Two different computer implementation criteria are being tested in an ongoing series of trials. The first, and most extensively developed, makes use of Maxon’s XPresso® visual scripting environment to set up a semi-automated controllable design environment that allows to create parametric feature-based 3D models of building bulk solutions. The second approach is currently being tested by using Ilog’s OPL Studio® constraint programming environment to achieve fully automated search and 2D graphic visualization of the complete set of solutions to separate subdomains of the bulk problem.
keywords	Constraint-based design, constraint satisfaction problems, building bulk design, participatory planning, low-income housing
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia07_066
id	acadia07_066
authors	Gün, Onur Yüce ; Wallin, Nicholas J.
year	2007
title	Composing the Bits of Surfaces in Architectural Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 66-73
doi	https://doi.org/10.52842/conf.acadia.2007.066
summary	Emergent design tools, with enhanced modeling and parametric manipulation capabilities, are encouraging the exploration of new geometric typologies in the field of architecture. Designers are not only finding more opportunities to work with geometries of higher complexities but are also becoming able to manipulate their designs with simple formulations. After a decade of familiarity with free form modeling tools, architects must now become more aware of the critical relationship between design and construction. When a design is performed without taking the constraints of construction into account the inefficient method of geometric post-rationalization becomes necessary. Thus, the knowledge of the rationale should be applied from the very beginning of the design processes, and digital models should be informed and controlled while being developed. This paper will present analytical strategies and methods for working with nonstandard geometries in a geometrically and parametrically controlled environment. Each method is supported with custom scripts which run in both parametric and non-parametric computer aided design (CAD) platforms. Each script and method is manipulated for the next project and the computational tools created build up a library of surface generation, manipulation, and subdivision tools. This library later becomes a source for office-wide use of surface manipulation.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade2007_009
id	ecaade2007_009
authors	Gün, Onur Yüce
year	2007
title	Composing the Bits of Surfaces in Architectural Practice
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 859-868
doi	https://doi.org/10.52842/conf.ecaade.2007.859
summary	Emergent design tools; with enhanced modeling and parametric manipulation capabilities are encouraging the exploration of new geometric typologies in the field of architecture. Designers are not only finding more opportunities to work with geometries of higher complexities but also becoming able to update their designs with simple formulations. After a decade of proximity with free form modeling tools, architects now have to become more aware of the critical relationship of design and construction. When the design is performed without taking the constraints of the construction the inefficient method of geometric post-rationalization unavoidably has to take place. So, the knowledge of the rationale should be applied from the very beginning of the design processes, and the digital models should be informed and controlled while being developed. This paper will present analytical strategies and methods developed for working with non-standard geometries in a geometrically and parametrically controlled environment. Each method is supported with custom scripts which run in both parametric and non-parametric computer aided design (CAD) platforms. Each script and method is manipulated for the next project over time and the computational tools created build up a library of surface generation, manipulation and subdivision tools.
keywords	Parametric, surface, construction, Generative Components, Rhino Script
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
doi	https://doi.org/10.52842/conf.acadia.2007.040
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	caadria2007_329
id	caadria2007_329
authors	Jacobs, Zhya
year	2007
title	Capturing the Infinite: Bottom up CAD - CAM Technology for Regenerative Development
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.b0l
summary	In most design practices there is a division between the generation of information to describe buildings and the production of information to construct them. Today architects are in charge of the design of the building (aesthetics) while the contractor is accountable for the means of construction (tectonics). The advent of digital technologies within the field of architecture however has begun to cause and will continue to cause fundamental changes within the AEC industry. The Paper describes a possible scenario where a Bottom – Up, part to whole approach to architecture can be adopted using the freedom afforded by Parametric Design within the CAD-CAM environment. This approach is explored through the design of a smart block in concrete that is integrated into a wall system.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_639
id	caadria2007_639
authors	Jinuntuya, Pinyo; Jirayod Theppipit
year	2007
title	Temporary Housing Design and Planning Software for Disaster Relief Decision Support System
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.k9q
summary	There is a continuous and urgent need for disaster relief in Thailand and countries suffering from floods and tsunami impact. Based on this issue, design and planning software for temporary housing project has been developed, as well as the process and guideline for implementation. This paper describes a unique coupling of interactive 3D virtual environment with parametric designing in order to manage disaster relief project more efficiently. Architects and planners can use the functionality of software on both design simulation and project evaluation aspects. We need to provide correct information to help people making decision when they are in disaster. So the disaster relief decision support system must offer proper information of crisis management focused on people, place, and process. One of the main features of software is the relationship modeling of essential factors such as number of people, houses, budget, time, and space. This automatic temporary houses generation and space planning is simulated for land use and layout plan design with cost estimation analysis. The system components were proposed to a new disaster relief system in alternative approach. Using community-based development will not cost budget but required people participation. Our software’s space coordination will start and centered from available space in school or temple with sufficient infrastructure. After essential factors are inputted, appropriated number of temporary houses, public facilities, and management guideline will be generated to support further planning decision. Our core system was developed on Java and Swing Technology, empowered by real-time 3D rendering CAD engine. In addition, “Virtools” as our Authoring Tools was applied to improve design interaction and explore rapid software prototyping. At the end, we discuss the comparison between real situations in Thailand and appropriate design standardization, which should be reconsidered how to manage crisis with the limitation of time and budget from government.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	bsct_kourkoutas
id	bsct_kourkoutas
authors	Kourkoutas, Vassilios
year	2007
title	Parametric Form Finding in Contemporary Architecture
source	Vienna University of Technology; Building Science & Technology
summary	The search of new geometry has been during the last years an interesting subject for Contemporary Architecture. As the 21st century brought a new era for architectural design, CAD programs have evolved together with the idea of Form Finding. The possibilities offered make the collaboration of the architect with the computer now possible in terms of searching the appropriate form for given cases. As the analysis of contemporary architectural pieces has indicated, the procedure of architectural design can be semi-automated. Parametric Form Finding is transferring generative approaches into the architectural design workflow by introducing a set of rules to describe the constrains of the form. Given this context, two methods have been realized, which are guided by the user by providing basic two dimensional shapes, restrictions and form characteristics. The approach is fitted in a plug-in for the modeling environment of Rhinoceros that generates three dimensional form based on the user?s input. The methods followed are being evaluated.
keywords	Parametric, Form Finding, Rhinoceros, plug-in
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2007/07/22 15:29

_id	ascaad2007_055
id	ascaad2007_055
authors	Mallasi, Z.
year	2007
title	Applying generative modeling procedure to explore architectural forms
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 697-712
summary	Computer generated 3D forms using generative procedures have matured in the last decade and now considered as a tangible approach for realizing architectural design ideas. As fascinating as the approach might be, it is still lacking actual application in the early architectural design process. There are many reasons for this, among them: it has many implications over the architectural design process mainly the practicality of design during the conceptual design stage; it is cumbersome to develop construction drawings for complex architectural forms; and the necessity for producing conceptual designs quickly in less time as design requirements and decisions are constantly being changed. This paper initially reports on a practical development of a computer program which generates architectural massing designs based on integrating forms generation technique in a design scheme. The influence for this development was inspired by Spirolaterals technique used in generating complex 3D architectural forms that are based on parametric shape configuration. The development has three goals: to review the principles for constructing generative forms in the conceptual design stage using simple CAD tools, to assist in the production of design schemes based on a few basic shapes and rules, and to explore 3D forms finding and generation without the need to write a complicated computer program that are difficult to produce by hand. The development resulted in generating an interesting number of 3D compositions. The author applied this technique to experiment during the production of a design scheme. The paper hence describes the current development of ArchiGen tool to produces generative 3D forms utilizing ArchiCAD © GDL programming language. The tool is embedded within ArchiCAD for generating 3D shapes. One of the main features of this implementation is that users are able to sketch 2D shapes and the tool will deform its three dimensional generation. Moreover, the user being able to abstract the architectural character from the resulting complex 3D shapes. This development extends current related work by allowing the designer to load shapes into ArchiGen which acts as vocabulary of shapes for a design scheme constraints. It is intended from this work to inspire future work focusing on using generative tools in the early conceptual design stages.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	d939
id	d939
authors	Marc Aurel Schnabel
year	2007
title	8448cubed
source	The Faculty of Architecture, Design and Planning, The University of Sydney, Sydney 2006, NSW, Australia www.arch.usyd.edu.au ISBN: 978-0-9581221-2-2
summary	8448cubed is an architectural design exhibition showcasing creative digital design techniques. It explores how the coupling of architectural designs with digital modelling and manufacturing methods allow for a deeper comprehension and experience of space and form. The core of this collection is held together by the idea of spatial concepts within constraints of a cube 8448 millimetres3 in volume. Materials are creatively cut using computer-aided architectural design tools, parametric design techniques and digital manufacturing processes.
keywords	digital modelling, parametric modeling, digital manufacturing, form generation, exhibition
series	book
type	normal paper
email
more	http://8448cubed.tk/
last changed	2007/11/17 16:07

_id	ecaade2014_011
id	ecaade2014_011
authors	Marie Davidova
year	2014
title	Ray 2:The Material Performance of Solid Wood Based Screen
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 153-158
doi	https://doi.org/10.52842/conf.ecaade.2014.2.153
wos	WOS:000361385100016
summary	The wood - humidity interaction of solid wood has been tested through generations on Norwegian traditional panelling. This concept has been further explored by Michael Hensel and Steffen Reichert with Achim Menges on plywood and laminates in basic research. Plywood or laminates are better programmable but they are less sustainable due to the use of glue. This research focused on predicting the performance of solid wood in tangential section which is applied to humidity-temperature responsive screen for industrial production. With the method Systems Oriented Design, the research evaluated data from material science, forestry, meteorology, biology, chemistry and the production market. Themethod was introduced by Birger Sevaldson in 2007 with the argument that the changes in our globalized world and the need for sustainability demands an increase of the complexity of the design process. (Sevaldson 2013)Several samples has been tested for its environmental interaction. The data has been integrated in parametric models that tested the overall systems. Based on the simulations, the most suitable concept has been prototyped and measured for its performance. This lead to another sampling of the material whose data are the basis for another prototype. Ray 2 is an environmental responsive screen that is airing the structure in dry weather, while closing up when the humidity level is high, not allowing the moisture inside.
keywords	Material performance; solid wood; wood - humidity interaction
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2007_af24
id	sigradi2007_af24
authors	Monedero, Javier
year	2007
title	Architectural eLearning: An inquiry into the fuzzy boundaries that separate education and instruction [Architectural eLearning. Una indagación sobre los límites borrosos que separan la educación y la instrucción]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 155-158
summary	This communication is based on the development of a new subject to be imparted in collaboration with three Departments (Visual Communication, Projects and Construction) at the School of Architecture of Barcelona. It is a work that has been financed with a special grant from our university, aimed at the development of new teaching modalities and, in particular, of those that would develop the use of new technologies, collaboration among university departments and eLearning. The aim of the communication is twofold. First, to present some results that we consider valuable in themselves, as much for the techniques as for the methodology that we have used. Second, to propitiate a debate on the new situation that the teaching of architecture is moving to, due to the advance of a series of instruction methods where the methodological organization, the storing of informative material and the preparation of autonomous interactive systems, open more and more effective roads of learning but that, at the same time, point towards a new educational structure that fits badly within the traditional structures in which we have still to work daily. Regarding the first point, the main aspects to highlight are: a) the development of a selflearning system by means of a very complete series of tutorials that allow a gradual acquisition, depending on the necessities or interests of each student, of geometric modeling, parametric design, visual simulation and interactive animation techniques, b) the development of a system of general information supply and on line comments and corrections. Regarding the second point, a provisional theoretical framework has been elaborated based on the consideration of the ubiquitous visual communication media as misleading mediators of a personal relationship. This theoretical frame has been tested by a few experiences carried out with the collaboration of students implied in the project. The general conclusion is that both challenges must be faced at the same time: new educational technologies must be analysed and integrated in our curricula and a new theoretical framework, able to clarify the difference between instruction and education, must be developed in parallel with those technologies.
keywords	Architecture; eLearning; Visual Communication
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia07_230
id	acadia07_230
authors	Qian, Cheryl Z.; Chen, Victor Y.; Woodbury, Robert F.
year	2007
title	Participant Observation Can Discover Design Patterns in Parametric Modeling
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 230-241
doi	https://doi.org/10.52842/conf.acadia.2007.230
summary	Our research aims to understand the mid-level patterns of work that recur across designers and tasks. Our users comprise active architects and civil engineers. The hypothesis is that making such patterns explicit will result in improved expert work practices, in better learning material and suggestions for improvements in parametric design. The literature shows that patterns express design work at a tactical level, above simple editing and below overall conception. We conducted a user experience study based on Bentley’s GenerativeComponents, in which geometry can be related, transformed, generated, and manipulated parametrically within a user-defined framework. After interviewing the system’s chief, we ran a participant-observer study in the January 2007 SmartGeometry workshop. We engaged designers through the role of tutor and simultaneously observed and discussed their design process. We found clear evidence of designers using patterns in the process and discerned several previously unknown patterns. In February at another 10-day workshop, we found more evidence supporting prior findings. The paper demonstrates that participant observation can be an efficient method of collecting patterns about designers’ work and introduces such new patterns. We believe these patterns may help designers work at more creative levels and may suggest new ideas of interest to CAD application developers.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	caadria2007_511
id	caadria2007_511
authors	Rügemer, Jörg
year	2007
title	Various Media in the Design Process and Methodology
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.t8j
summary	The paper describes the mergence of traditional architectural design processes with approaches that rely on digital media and software for the creation of architectural space. The depicted projects are part of a ‘work in progress’ process, with a recent studio that is set up to apply the so far accumulated experiences. Within the projects, focus is on those design phases where the applied media and methodology is changed and where the back and forth between different media and the depth of their implementation is perceptible in, and / or has a significant influence on the design itself. Through a line of successive experiments, the paper explains the development of a possible method that utilizes a variety of today’s accessible tools in architecture, making use of phenomena that appear when changing from one tool to another. Goal is to avoid limitations that are existent by the solely employment of one media or method, and to understand the fusion between different media as an inspiring momentum to develop the design further. The paper draws a line from an initially experienced and analyzed design method over several projects in practice and academia to conclude with a possible design method that could be established successfully in both fields of architectural teaching and practice. Initial experiences had been drawn from professional practice, in which the digital realm was limited to a support device of the design process. The first project that is described in the paper, explored the employment of digital media as a possible tool to drive the design process in a broader sense. The studio setting was organized as a laboratory for the exploration of the change of applied media. Focus was on the influence on the design progress. The design method required of the studios participants was not exclusively based on an architectural program, but on an initial, very conceptual process with an artistic approach, based on personal experiences of each participant. This was meant to detach the students entirely from architectural processes and mindsets they had picked up so far. Parallel to that kind of an intellectual process, studio participants learned to handle Maya as the 3D modeling software of their choice. Both the technical knowledge and the artistic projects were merged in a second project phase, in which participants had to further develop their work by applying a very effective mix of various design tools. Using digital media as a parametric design generator, subsequent projects were developed. The task for the designers here were to decide what kind of algorithm could be applied to which process and when it was to be stopped for the best result. Applying such an automatism successfully to the design process, the employment of traditional media and methodology remained, to adapt the digital driven schemes to the required design task. The diverse design experiments demonstrate important aspects when merging complex design and animation software with traditional design processes. To achieve good architectural design results, all examined projects showed that traditional design methods with its physical models are hardly replaceable to its full extent by other media, but digital media are able to strengthen design processes and invite designers to explore new means of design work.
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: