Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_069
id	caadria2007_069
authors	Chiu, Hao-Hsiu
year	2007
title	Telepinup System: Supporting Dynamic Remote Interaction in Design Reviews
doi	https://doi.org/10.52842/conf.caadria.2007.x.u1d
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper addresses a pilot study in proposing a series of interface design solutions as integrated parts of a virtual communication space prototype: Telepinup System, which intends to enhance dynamic and seamless experiences for distributed architectural design discussions through digital interaction. Aiming to support graphic-centered, nonlinear, and contextual way of visualverbal communication suitable for design discussion, the prototype tool is developed to demonstrate various interface solutions and to be evaluated within the actual use contexts in two user experiments for its efficiency and effectiveness of underlying design criteria and proposed solutions. Interaction patterns during the experiments are recorded in the database and immediately visualized at the end of each test for participants to give instant feedback and for later analysis. The initial result shows that the collaboration between some critical interface solutions helps seamlessly synchronize graphical, verbal and social information exchange.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	a38d
id	a38d
authors	KOUZELEAS Stelios
year	2007
title	CONVERSION OF GPS DATA TO CARTESIAN COORDINATES VIA AN APPLICATION DEVELOPMENT ADAPTED TO A CAD MODELLING SYSTEM
source	2nd International Conference on Experiments/Process/System Modelling/Simulation & Optimization (2nd IC-EpsMsO), Athens, 4-7 July, 2007
summary	Nowadays, common methodologies in telegeoprocessing–telegeomonitoring use telecommunication means such as the GPS in order to transmit geographical coordinates to modelling and simulation systems. These 3D geodetic coordinates (φ, λ, h) can be used by modeling systems via specifics interfaces in order to proceed to real-time modelling of the remotely transmitted data. A previous published work describes a real-time remote 3D digitizing and modelling procedure via transmitted Global Positioning System (GPS) data from the field towards to a CAD system. However, these GPS data must be converted to adequate coordinate’s format (x, y, z) so that the CAD system can use them. This paper presents the computing development of a specific application adapted to a CAD modelling system permitting the conversion of the geodetic coordinates to cartesian coordinates. It presents the relation between geodetic and cartesian coordinates, the options of the final developed application and finally some schematic aspects of the computing process. The application development is realized in AutoCAD modelling system environment via special developed interface in Visual Basic (VBA) and Visual Lisp programming language. The aim of this work is to give the possibility to a CAD modelling system to “translate” and receive automatically geographical coordinates or to convert manually and selectively geodetic coordinates φ, λ, h to cartesian coordinates x, y, z.
keywords	Coordinates conversion ; CAD development ; GPS data ; CAD modelling and simulation
series	other
type	normal paper
email
more	http://www.epsmso.gr/2nd_EpsMsO_2007/Frame_page.htm
last changed	2007/10/19 17:48

_id	ascaad2007_040
id	ascaad2007_040
authors	Loemker, T.M.
year	2007
title	Location Based Services in Revitalization: The Use of Commonly Available Techniques for a Client-Participation Model
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 505-516
summary	This research concentrates on the combination of remote sensing devices, georeferenced data, web-based optimization techniques and Location Based Services in revitalization. Its aim is to enhance the delivery of information about the development potentialities of existing buildings. The present and idle stock of buildings is extensive. Nonetheless, significant data and information about existing buildings is hardly available. The real estate owners are usually not known by prospective clients and they can be elicited only with substantial effort. But even if data about a building is available it is difficult to valuate it precisely, because of missing standard classification techniques. The question whether or not a building is suitable for a certain subsequent use is therefore hard to answer. It involves an extensive expenditure of time and manpower. Recent publications however, demonstrate that requests for the re-use of buildings can be solved through the use of combinatorial optimization techniques (Loemker 2006a, 2006b, 2007). Within these approaches researchers mainly concentrate on the architect dealing with inquiries from clients. These inquiries typically address the question if specific buildings are suitable for particular future uses. With the aid of optimization engines the architect can solve these requests through a description of the existing buildings and the corresponding enquiries in terms of specific criteria such as number and size of rooms or adjacency between rooms. According to an unambiguous syntax these approaches can be applied to any building type. The building data is stored in databases which can be inquired through optimization engines which thereupon calculate suitable solutions to the demands made by the client. But even if these approaches demonstrate high potential, their bottleneck lies in the exclusive use through the architect. Neither can they be addressed to buildings that are not listed in the architects own inventory listings nor can they be used by the clients themselves. Furthermore, no reliable statement about a prospective reuse of a building can be made directly on site by prospective clients, i.e. buyers or renters. In our research we examined if ad-hoc analyses of existing buildings can be accomplished through the clients themselves with the aid of Location Based Services that can be accessed by common remote sensing devices. The aim is to give prospective clients the possibility to visit a building and run in-situ usability simulations. To accomplish this, building data will be transferred between the building and the client through the use of ordinary communication devices. These devices automatically connect to server-based applications, which compare the requirements of the client with the existing building and run remote simulations on concrete further utilization. The newly generated information will then be passed back to the client’s device. In the paper we address a scenario of a prospective client who visits a city where he hits on an unused building he might be interest in. The client wishes to gain immediate and accurate information if the building is able to meet his demands regarding the space needed for his company. Different techniques investigated, their assets and drawbacks will be described that could accomplish suchlike tasks.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ecaade2007_111
id	ecaade2007_111
authors	Lömker, Thorsten M.
year	2007
title	Location-Based Optimization to Foster Economic Decision-Making in Revitalization
doi	https://doi.org/10.52842/conf.ecaade.2007.311
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 311-317
summary	The existent and idle stock of buildings is extensive. However, significant information about these buildings is hardly available. The real estate owners are usually not known by prospective customers and they can be elicited only with substantial effort. But even if data about a building is available, it is difficult to valuate it precisely, because there are no standard classification techniques available, which would also consider the subjective subsequent requirements of the interested parties. The question whether a building is suitable for a certain subsequent use is therefore hard to answer. It involves an extensive expenditure of time and manpower. No reliable statement about a prospective reuse of a building can be made on site by prospective clients, i.e. buyers or renters. Therefore, we examined the technology needed by the customer to accomplish in-situ ad-hoc analyses of existing buildings. These technologies are namely remote sensing devices using georeferenced data, Location-Based Services and web-based optimization techniques. The aim is to give prospective clients the possibility to visit a building and run an in-situ usability simulation. To accomplish this, building information will be transferred between the building and the client through the use of common communication devices. These devices automatically connect to server-based applications, which compare the requirements of the prospective customer with the existing building and run remote simulations on concrete further utilization. By the use of georeferenced data alternative locations of unused buildings can be integrated into the simulation as well.
keywords	Revitalization, location-based services, ubiquitous computing, web-based optimization
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia07_182
id	acadia07_182
authors	Oxman, Neri
year	2007
title	Rapid Craft: Material Experiments towards an Integrated Sensing Skin System
doi	https://doi.org/10.52842/conf.acadia.2007.182
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 182-191
summary	The distinction between matter (mechanics) and information (electronics) in the context of responsive building skins has promoted unique design protocols for integrating sensor technologies into material components. Such a distinction results in applications of remote sensing after the process of material fabrication. Sensors are commonly perceived as electronic patches which initiate mechanical output with response to electrical input. This work seeks to establish a novel approach to the application of electronics in building skins, which prioritizes material selection, behavior, and fabrication technology in relation to the required task, over postproduction sensor integration. The term “Rapid Craft” is proposed to describe such design protocols which couple material behavior and fabrication in the design of responsive skins. Rapid Craft is a designation for the incorporation of craft materialization knowledge within the framework of CNC processes of fabrication. A light-sensing inflatable skin system is developed as a working prototype, which demonstrates such an approach.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	ecaade2007_086
id	ecaade2007_086
authors	Oxman, Neri
year	2007
title	FAB Finding
doi	https://doi.org/10.52842/conf.ecaade.2007.785
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 785-792
summary	The distinction between material behavior (mechanics) and material response (electronics) in the framework of responsive building skins has promoted unique design protocols for integrating sensor technologies into material components. Such a distinction results in the implementation of remote sensing devices post the process of material fabrication. Sensors are commonly perceived as electronic add-on patches which initiate mechanical output with response to electrical input. This work seeks to establish a novel approach to the integration of electronics in building skins which prioritizes material selection, behavior and fabrication given a required task, over post-production sensor application. The term “FAB Finding” is proposed to describe an instrumental methodology facilitating the coupling of CNC fabrication processes with material organization and behavior. It offers a design mentality which emphasizes the nature and the effects brought about by the use of specific fabrication processes which are by definition inherent in the design product and its behavior. A light-sensing inflatable skin system is developed as a working prototype demonstrating such an approach.
keywords	Digital fabrication, material behavior, form-finding, sensors, responsive skin
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ecaade2007_095
id	ecaade2007_095
authors	Benton, Sarah
year	2007
title	Mediating between Architectural Design Ideation and Development through Digital Technology
doi	https://doi.org/10.52842/conf.ecaade.2007.253
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 253-260
summary	Negroponte (Negroponte 1969) described how the creative thinking of a designer can become affected by the ‘machine’ urging the designer to draw a distinction between ‘heuristics of form’ and ‘heuristics of method’. This ensured that by taking advantage of digital technology a symbiotic relationship was maintained between both of these. To date architects have investigated digital tools for generating form and imagery with increasing success, but have arguably fallen short of using those tools for advancing their design methods. The research presented here explores questions not solely focusing on the use of the tools, but on heuristic methods of the profession, to examine the interconnectiveness of the design method and the tool in a symbiotic fashion; to examine the nature of creativity. This paper is taking a critical standpoint about the place of digital tools in an architect’s method in the pursuit of poetic architecture and, in particular, its representation, to enable speculation, as opposed to prediction, of ideas in the design process from the early phases. The issue is discussed through the findings of my doctoral research case studies that have proved germane to my particular enquiry, that is, digital mediationbetween design ideation and design development.
keywords	Ideation, development, design process, digital techniques, animation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_077
id	ecaade2007_077
authors	Breen, Jack; Stellingwerff, Martijn
year	2007
title	The DigiTile Project
doi	https://doi.org/10.52842/conf.ecaade.2007.059
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 59-66
summary	The influx of computer-based design and presentation platforms, particularly in conjunction with computer aided physical modelling and manufacturing techniques, has stimulated a renewed focus on imaginative, innovative architectural product design. Essentially, the ambition of the DigiTile exercise was to stimulate the development of individual proposals for new kinds of surface articulations on the basis of a tile-like unit, or set of units. Inspirations varied widely: from precedents ranging from history to nature, as well as from contemporary design practice and graphic imagery. The prevailing freshness and technical inquisitiveness amongst the participants contributed to the generation and concretisation of distinctive tiling concepts, many of which have arguably not been seen before. The findings and conclusions are based upon the array of outcomes from the programme so far, as well from a very recent session. Furthermore, the paper highlights the kinds of opportunities for hands-on education-based compositional studies that we foresee in the near future.
keywords	Computer aided manufacturing and modelling, composition, prototyping, tiling, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2007_001
id	ascaad2007_001
authors	Germen, M.
year	2007
title	Virtual Architecture: Reconstructing Architecture Through Photography
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 1-16
summary	The concept of construction in architectural design process is a temporary action that exists for a while and transforms itself into another product; i.e. the final building to be inhabited. Construction site can be taken as a podium where a play-to-remain-incomplete is being staged. The incompleteness causes us to dream, due to the fact that a complete building loses its narrative potential as it informs us about all the necessary pieces that constitute the whole: There is no puzzle to solve... Construction in this sense is like a historical ruin; Paul Zucker asserts that "ruins have held for a long time a unique position in the visual, emotional, and literary imagery of man. They have fascinated artists, poets, scholars, and sightseers alike. Devastated by time or willful destruction, incomplete as they are, they represent a combination of man-made forms and of organic nature." Architectural photography has the potential of re-creating this puzzle back again in order to bring an alternative representation to architecture. The architectural photographer is sometimes offered the freedom of reinterpreting, reconstructing architecture in order to be able to present a novel virtual perception to the audience. The idea here is to get some spatial clues that can later be used in other architectural projects. I was personally invited to two different concept exhibits in which I was given the freedom of inventing a virtual architecture through photography. The concept text written for one of these exhibits goes as follows: “I went, saw, stopped, attempted to grasp and enter it, looked at construction process and workers with respect, tried to internalize, wanted to claim it for a while, dreamed of creating a microcosm out of the macrocosm I was in, shot and shot and shot and finally selected: The created world, though intended for all, was probably quite a personal illusion...” Virtual architecture is a term used for architecture specifically created in the computer environment and never used in the realm of architectural photography. People like Piranesi, Lebbeus Woods, M.C. Escher, Marcos Novak, etc. previously dreamed about architectures that could exist virtually on paper, screen, digital environments. This paper will try to prove that this practice of (re)designing architecture virtually can be transferred to one of the most important realms of visuality: Photography. Various digital processes like stitching multiple photos together and mirroring images in image editing software like Photoshop, allow this virtual architecture to take place in the computer environment. Following this, I propose to raise the term “snap architecture” to connect it to the frequently referred concept of “paper architecture.”
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_067
id	ecaade2007_067
authors	Tellios, Anastasios
year	2007
title	The Climax from a Conceptually Transparent Architecture towards a Digitally Transparent Image
doi	https://doi.org/10.52842/conf.ecaade.2007.935
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 935-940
summary	The image which is usually digitally produced using CAD products does evoke a series of distinctions compared with a traditional version of imagery which initiates to photography or even handcraftsmanship. The major shift observed, when expanding this issue in a period of digital dominance in architecture, is this image’s transparency. This transparency either appears as a tangible, almost tactile quality, or as a vague sense, accessible only to a watchful observer. In both cases, transparency animates the digital image of architecture using a certain morphological vocabulary, closely defined by its transparency itself. The procedure, with which transparency retracts a set of physical laws, automatically places its architectural product among the broad array of the so called ‘virtual environments’. The examining of digital transparency as merely an additional quality of the architectural matter, which allows the human sight to cross the material, while blocking the physical transition, is definitely a safe suggestion. It leaves, though, a whole field of qualities and identities unexplored. These qualities are connected to the perception of space as simultaneously uniform and fragmented. One can argue, with a relative safety, that the physical usage of digital transparency as a choice of construction materials, as well as its potential as a representative tool, seem to renegotiate the terms and the conditions of architecture’s very procedure. The very nature of the architectural image each time is a transparent, lightweight and ambivalent one.
keywords	Transparency, image, ethics
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_076
id	ecaade2007_076
authors	Coates, Paul S.; Derix, Cristian
year	2007
title	Parsimonious Models of Urban Space
doi	https://doi.org/10.52842/conf.ecaade.2007.335
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 335-342
summary	This paper sets out an approach to urban modelling derived from early work with cellular automata and agglomeration models. In these cases the models are an example of distributed representation, where the rules built in to the model are replicated in all the discrete components of the model be they cells or agents. This is the classic AI. / AL paradigm of emergent systems. The paper describes the main structure of the models, and presents examples of the use of this modelling process in design education, pointing out the way dynamic models allow mapping on to interesting speculations about the dynamic of the city, and its social systems. The paper ends with a report on the use of such models as a design decision support system and how they will be used in planned work in master planning in the London Thames gateway area under the UK govt. sustainable communities initiative.
keywords	Urban modeling, space syntax, agent based modeling, cellular automata
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2007_136
id	ecaade2007_136
authors	Dohmen, Philipp; Rüdenauer, Kai
year	2007
title	Digital Chains in Modern Architecture
doi	https://doi.org/10.52842/conf.ecaade.2007.801
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 801-804
summary	The “digital chain” is a continuous digital organization process, from the draft right into the manufacturing. Now one of these chains is applied on a mountain shelter. The individual steps are programmed and connected by universal interfaces. The computer is used not as passive digital drawing board, but as self-dependent tool that exerts influence on. Rules, dependence and aims, are formulated by the architect the computer can optimize due to its computing power. The role of the architect shifts thereby from the form designer to the role of a process designer. The aesthetics of the results is exciting and unusually, organically and self-evident - it is however always the result of given parameters. One topic is the complexity. The constructional modeling of the computers is a substantial support and easement. With programming techniques and parameterized construction, a high degree of individualizing becomes possible. A further point is efficiency. Construction with individual units, which former on was just realizable with high time and cost, become economically in this manner today. Furthermore computer-controlled machines work with precision and a detailing, which would be by workmanship neither temporally nor technically obtainable.
keywords	Digital chain, mass customization, one of a kind production
series	eCAADe
email
last changed	2022/06/07 07:55

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ascaad2007_052
id	ascaad2007_052
authors	Hamza, N. and M. Horne
year	2007
title	Building Information Modelling: Empowering Energy Conscious Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 661-670
summary	The increasing awareness of climate change and carbon dioxide emissions from the built environment is resulting in the need to visualize the environmental performance of buildings. One of the recent drivers in the UK has been the tightening of building regulations relating to energy consumption in buildings, mandating all buildings to be performance evaluated by accredited environmental simulation tools to test their carbon dioxide emission against set targets. Currently there is major confusion on all levels from architects to building control officers and contractors on how to engrain energy consciousness principles in the design and construction of buildings. Within this context, ‘Building Information Modelling’ that is linked to ‘Building Performance Modelling’ is increasingly being looked upon as a tool to facilitate the communication between the design team and contractors and to provide a transparent information model on the specification and targeted energy consumption of all new/ refurbished buildings to all parties involved. In this paper, analysis of the benefits and drawbacks of current efforts to combine those two comprehensive databases will be investigated. A sample of main software development companies, architects and contractors, using semi-structured interviews is undertaken to find out how Building Integrated Modelling (BIM) and Building Performance Modelling (BPM) can support the design and construction teams to deliver energy conscious buildings.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2011_p027
id	cf2011_p027
authors	Herssens, Jasmien; Heylighen Ann
year	2011
title	A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary	Architects‚Äîlike other designers‚Äîtend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses‚Äîin the way architecture is conceived, taught and critiqued‚Äîresults in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as ‚Äúmovement‚Äù, ‚Äúguiding‚Äù and/or ‚Äúrest‚Äù plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords	blindness, design parameters, haptics, inclusive design, vision
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20075211
id	ijac20075211
authors	Ioannidis, Charalabos; Potsiou, Chryssy; Soile, Sofia
year	2007
title	A Spatial Information System for the Archaeological Site of Mycenae
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 376-394
summary	Digital and automated photogrammetric procedures, developed for the collection and management of spatial data, and terrestrial laser scanning systems provide new capabilities for documentation of archaeological monuments and sites. Also, special tools in Spatial Information Systems and production of virtual models have been developed. Their combination provides relevant scientists (architects, archaeologists, etc) and users with a variety of options for the creation of integrated systems capable for documentation, restoration and cultural development of archaeological sites. Detailed 2D and 3D representation of the current condition of the site, development of a multi-purpose SIS, and introduction of modern digital products at a local museum, such as 3D models, creation of virtual environment and Web applications are some of them. Application of such techniques and systems was made to the archaeological site of the Mycenae in Greece, one of the most important sites worldwide.
series	journal
last changed	2007/08/29 16:23

For more results click below: