Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2007_022
id	ascaad2007_022
authors	Belkaid, A. and A. Ben Saci
year	2007
title	A multi-agent system for the formulation of architectural terms of references
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 261-272
summary	This work aims to use the multi-agent systems, permitting to coordinate the behavior of intelligent artificial agents, in order to help the architect at the first moments of the conception. We proceed by modelling the architectural terms of reference, using the concept of primary architectural system, to manage the initial information. This modelling process proposes a new formulation of this system based on the agent paradigm.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	6c08
id	6c08
authors	Horne M, Thompson E, Podevyn M
year	2007
title	An overview of virtual city modelling: emerging organisational issues
source	CUPUM07 10th International Conference on Computers in Urban Planning and Urban Management, Iguassu Falls, Brazil, 11-13 July 2007
summary	This paper presents a recent overview of the increasing use of Virtual Reality (VR) technologies for the simulation of urban environments. It builds on previous research conducted on the identification of three-dimensional (3D) city models and offers an analysis of the development, utilization and construction of VR city models. Issues pertaining to advantages, barriers and ownership are identified. The paper describes a case study of the development of a VR model for the city of Newcastle upon Tyne in the UK and outlines the role that academic institutions can play in both the creation and utilization of urban models. The study offers a new approach for the creation, management and update of urban models and reflects on issues which are emerging. Areas for future research are discussed.
keywords	city models, Virtual Reality, management, diversity, ownership
series	other
type	normal paper
email
last changed	2008/03/14 00:13

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2007_633
id	caadria2007_633
authors	Maravelea, Kalliopi; M. Grant
year	2007
title	The Creation of Urban Form: A Normative Approach to Modelling
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.t8k
summary	The aim of this research project is to develop a methodological process that allows the designer to assemble and create various scenarios representing an urban environment through the utilization of economical computer based methods. During the last decade different techniques have been developed to address the needs of visualisation of urban areas many being based on photographic and photogrammetric systems. The demand for 3-D urban models continues to grow and although new technologies have undoubtedly reduced the time needed for the construction of a 3D model, there are still some remaining problems related to data quality and the level of the dimensional accuracy. On the basis that these problems are primarily related to software and hardware constraints and in conjunction with the fact that the richness and complexity of an urban space is difficult to represent in a 3D context, there is a growing interest in the modelling of the urban fabric which is not dependant on heavily capitalised technology for its data. The core principle of the current research project is summarised in the process of deploying a mechanism, which will allow the visualisation of urban form without loosing its quality and architectural characterisation. This technique suggests that a selection of various building types can be collected and described by their architectural elements, textures, scale and dimensions. From each group of buildings a library of fragmented architectural components can be then derived. The accomplishment of this methodology is the formulation of a 'grammar' comprised of a characteristic ‘syntax’ and its associated ‘vocabulary’. Therefore the expected outcome of this research is an approach that would allow the designer to create easily and quickly not only any desired building but additionally any imaginary cityscape.
series	CAADRIA
last changed	2022/06/07 07:50

_id	ecaade2007_162
id	ecaade2007_162
authors	Ramirez, Joaquin; Russell, Peter
year	2007
title	Second City
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 359-365
doi	https://doi.org/10.52842/conf.ecaade.2007.359
summary	In the era of communication, the participation in internet-communities has grown to become a motor for innovation in software and community platforms. The paper describes the hypothesis that, by creating a virtual city (or a second city) a new type of social, economic and scientific network is established, which is supported through visual communication technologies. The various users bring, per se, their own intrinsic motivation and requirements to the system. Nonetheless, a personal identification with a city/neighbourhood/house/apartment can be used to awake awareness and to foster participation. This is especially important when dealing with the city inhabitants. City modelling itself has been carried out for over a decade. Projects such as the city model of Graz have shown how city models can be established so as to be scalable for new information (Dokonal et al 2000). Furthermore, these city models have been used in the education of future architects and urban planners. The project described here moves in the opposite direction: the model moves out of the classroom to an interdisciplinary city-model-platform. The work described here is the conceptual model for a multi-dimensional data set that models the city. This has spawned a host of other projects using the model as a foundation for further interactivity development and the extension of the model itself. The paper describes the structure of the conceptual model and the first experience of incorporating diverse projects such those mentioned above. The model also is structured so as to be compatible with the XML standards being developed for city information (CityGML). The goal of the project is to create a data set describing the city that not only describes the geometry, but also the history (including planned histories) and nature of the city. In contrast to virtual realities, which attempt to create a separate world (e.g. Second Life), the Second City is intended as an interdisciplinary repository for the geometrical, historical and cultural information of the city.
keywords	City modelling, virtual environments, web 2.0
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2007_289
id	caadria2007_289
authors	Sawasratanathon, Putthinun; Pinyo Jinuntuya
year	2007
title	Collaborative Cooling Load Analysis Software for Public Participation on Energy Conservation
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.o0s
summary	This article is part of a research on developing cooling load analysis software for energy conservation. This research focuses on developing the system of Collaborative Design and Public Participation System which allows property owners, architects, engineers as well as others outside the field, to contribute to design process based on the concept of energy conservation within the collaborative virtual environment. The combination of the two ideas between collaborative virtual environment and Analysis Engine of cooling load calculation changes the traditional working processes in which architects and engineers work separately. From the traditional process where both architects and engineer redevelop the whole project from the beginning when redesigning is in need, this new collaborative process requires less time and energy from both parties due to the simultaneous participation of architects, engineers as well as other contributors. In this research, Microsoft© Direct3D® - API based Virtools® is used to develop Real-Time Simulation and its internal script in the calculation process. Through the implementation process, the study aims to develop the 3 components of 1) urban area database illustrating simulating maps for users 2) Graphic User Interface (GUI) connected to other software modules for further expansion and 3) Virtual Network Environment allowing multiple users to log in and use the programme at the same period of time.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ascaad2007_050
id	ascaad2007_050
authors	Techel, F., K. Nassar
year	2007
title	Teaching Building Information Modeling (BIM) from a Sustainabilty Design Perspective
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 635-650
summary	Building Information Modeling has recently gained significant attention both in academia and practice. BIM presents immense opportunities for increased efficiencies, coordination and quality of architectural design. One of the reasons that BIM offers a more comprehensive design approach is the fact that all aspect of the building are considered during the modeling phase. Rather than drawing the building using lines and circles actual object are used to model the building, which results in a more comprehensive underlying database model of the entire edifice being designed. The approach obviously has tremendous benefits in terms of coordination and systems integration, as well as, project control and management during the design and construction phases. Nevertheless BIM offers its own unique challenges vis-à-vis its introduction to students of architecture. The students in Architecture programs are usually introduced to BIM in two ways, either through a specialized course in CAD or via a shadow introduction in design studios and related courses. Careful positioning of the course within the architecture curriculum is crucial in order to gain maximum benefit in the synthesis of other course content. The reason being that students of architecture in earlier years of the design curriculum may not yet have developed the ability to synthesize and coordinate multiple systems required for complete BIM. This is an important consideration the design and pedagogy of introducing BIM to Architecture students. This paper argues for a new approach in teaching BIM for Architecture students. Instead of designing a course specifically for BIM/CAAD we present a paradigm whereas BIM can be presented within a larger more rigorous context. The experience of teaching BIM within a sustainable design framework is presented in this paper. Issues relating to the design of basic residential buildings were integrated into the course presenting BIM. A simplified set of design rules and guidelines under banner of sustainability were taught to the students in pre-defined doses and sequence throughout the course. The careful placement of these concepts permitted for BIM to be introduced in a more interesting and comprehensive manner than in the traditional CAD-course setting. Samples of student work are presented and critiqued in order to come up with recommendations and guidelines for incorporating BIM into a comprehensive and comprehensible course. The pedagogical advantages of and disadvantages of the approach are discussed within the paper, as well as, a detailed description of the course content and structure. Results from and outcome-based assessment of the objectives of the course are also illuminated which provided suggestions for future offerings of the course.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_226
id	ecaade2007_226
authors	Agger, Kristian; Lassen, Michael; Knudsen, Nikolaj; Borup, Ruben; Rimestad, Jens; Norholdt, Peter; Bramsen, Nikolaj
year	2007
title	B-processor
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 43-50
doi	https://doi.org/10.52842/conf.ecaade.2007.043
summary	The B-processor is a redesign of the digital building information modelling/managing concept: Addressing the whole building industry participants and all phases in the building process. Offering a new “standard” for digital building information structure with generic modelling and evaluation tools in the B-model kernel. Plug-in structure for free extension of the B-processor system by the Building Industry. Kernel prototyped in Java to be downloaded for free – open source.
keywords	Digital applications in construction, digital fabrication and construction, prediction and evaluation, design methodology, generative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_077
id	ecaade2007_077
authors	Breen, Jack; Stellingwerff, Martijn
year	2007
title	The DigiTile Project
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 59-66
doi	https://doi.org/10.52842/conf.ecaade.2007.059
summary	The influx of computer-based design and presentation platforms, particularly in conjunction with computer aided physical modelling and manufacturing techniques, has stimulated a renewed focus on imaginative, innovative architectural product design. Essentially, the ambition of the DigiTile exercise was to stimulate the development of individual proposals for new kinds of surface articulations on the basis of a tile-like unit, or set of units. Inspirations varied widely: from precedents ranging from history to nature, as well as from contemporary design practice and graphic imagery. The prevailing freshness and technical inquisitiveness amongst the participants contributed to the generation and concretisation of distinctive tiling concepts, many of which have arguably not been seen before. The findings and conclusions are based upon the array of outcomes from the programme so far, as well from a very recent session. Furthermore, the paper highlights the kinds of opportunities for hands-on education-based compositional studies that we foresee in the near future.
keywords	Computer aided manufacturing and modelling, composition, prototyping, tiling, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2023_253
id	sigradi2023_253
authors	Cavalcanti, Isabella, Teixeira Mendes, Leticia and Albuquerque, Fernando
year	2023
title	From Modeling to Collective Digital Fabrication: Experience of the "Banco Cabaça"
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 543–554
summary	This paper presents an experience of collective digital fabrication and parametric modeling of furniture made with recycled plastic waste, inspired by natural elements of the Brazilian northeast. In addition to conventional joinery techniques, we highlight the technologies of rapid prototyping (PR) and digital fabrication (FD) (Volpato, 2007, Pupo, 2008; Pupo, 2009); as tools that promote a paradigm shift, both in the design process and in production and materialization (Kolarevic, 2005), allowing recycled plastic to have new applications. We started with a brief review of digital fabrication processes in Brazil, emphasizing collaboration in design and execution. Then, we contain the recycling of plastic and the need for actions for its best destination. Finally, we present a sustainable and collaborative design experience: the modeling and digital fabrication of furniture, entirely produced from recycled plastic, called “Banco Cabaça”.
keywords	Sustainable Design, Digital fabrication, Collaborative process, Parametric modeling, Brazilian design.
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	caadria2007_451
id	caadria2007_451
authors	Chan, Chiu-Shui
year	2007
title	Evaluating the Cognition in a Work Space Virtually
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.v8d
summary	In any built environment, there exist certain subtle stimuli that affect the occupants’ cognitive processes and performance. This research intends to identify: (1) what environmental stimuli an office building would generate that could affect the habitants’ cognitive ability, and (2) how the habitants react to these stimuli. The goals of the study are to develop a new method for using immersive virtual reality to represent a built environment for simulating environmental impact, and to discover factors that could influence habitants’ cognitive performance in a space. It is expected that the discoveries could advance the application of virtual reality to study human cognition in architecture.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia07_212
id	acadia07_212
authors	Christenson, Mike
year	2007
title	Re-representation of Urban Imagery: Strategies for Constructing Knowledge
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 212-221
doi	https://doi.org/10.52842/conf.acadia.2007.212
summary	Productive analysis of photographically composed urban imagery is a ‘wicked’ problem due to the presence of multiple, entangled systems. This paper proposes constructive analytic techniques for composite imagery, consisting of digitally generating and superimposing graphic overlaps within and adjacent to original images, producing new images not rationally related to nameable systems. These new images promote pattern identifi cation, which in turn has the potential to inform conclusions about memory and navigation in urban sites. Thus, the difficulty inherent in systemic urban analysis is shifted to one of abstract image interpretation, and a new set of refl ective strategies becomes relevant. These strategies are illustrated through analysis of two existing systems in a midsize, Midwestern city: a system of pedestrian walkways connecting several downtown buildings, and a system of overhead power distribution structures. The systems have observable characteristics in common. But, while the walkways represent a deliberate attempt to structure memory and thus to aid navigation, the system of power distribution structures makes no such claim. The paper discusses specific implications of the method informing the author’s ongoing research and architectural design teaching. In conclusion, wider implications are suggested, informing the general question of constructing urban knowledge.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2007_076
id	ecaade2007_076
authors	Coates, Paul S.; Derix, Cristian
year	2007
title	Parsimonious Models of Urban Space
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 335-342
doi	https://doi.org/10.52842/conf.ecaade.2007.335
summary	This paper sets out an approach to urban modelling derived from early work with cellular automata and agglomeration models. In these cases the models are an example of distributed representation, where the rules built in to the model are replicated in all the discrete components of the model be they cells or agents. This is the classic AI. / AL paradigm of emergent systems. The paper describes the main structure of the models, and presents examples of the use of this modelling process in design education, pointing out the way dynamic models allow mapping on to interesting speculations about the dynamic of the city, and its social systems. The paper ends with a report on the use of such models as a design decision support system and how they will be used in planned work in master planning in the London Thames gateway area under the UK govt. sustainable communities initiative.
keywords	Urban modeling, space syntax, agent based modeling, cellular automata
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia10_110
id	acadia10_110
authors	Di Raimo; Antonino
year	2010
title	Architecture as Caregiver: Human Body - Information - Cognition
source	ACADIA 10: LIFE in:formation, On Responsive Information and Variations in Architecture [Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-4507-3471-4] New York 21-24 October, 2010), pp. 110-116
doi	https://doi.org/10.52842/conf.acadia.2010.110
summary	Recent studies in contemporary architecture have developed a variety of parameters regarding the information paradigm which have consequently brought different results and techniques to the process of architectural design. Thus, the emergence of an ecological thinking environment and its involvement in scientific matters has determined links moving beyond the conventional references that rely on information. It is characterized as an interconnected and dynamic interaction, concerning both a theoretical background and providing, at the same time, appropriate means in the architectural design process (Saggio, 2007, 117). The study is based on the assumption that Information Theory leads into a bidirectional model which is based on interaction. According to it, I want to emphasize the presence of the human body in both the architectural creation process and the use of architectural space. The aim of my study, is consequently an evaluation of how this corporeal view related to the human body, can be organized and interlinked in the process of architectural design. My hypothesis relies on the interactive process between the information paradigm and the ecological one. The integration of this corporeal view influences the whole process of architectural design, improving abilities and knowledge (Figure 1). I like to refer to this as a missing ring, as it occurs within a circular vital system with all its elements closely linked to each other and in particular, emphasizes architecture as a living being.
keywords	Architecture, information paradigm, human body, corporeity, cognitive Science, cognition,circularity, living system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ijac20075202
id	ijac20075202
authors	El-Hakim, Sabry; Gonzo, Lorenzo; Voltolini, Francesca; Girardi, Stefano; Rizzi, Alessandro; Remondino, Fabio; Whiting, Emily
year	2007
title	Detailed 3D Modelling of Castles
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 200-220
summary	Digitally documenting complex heritage sites such as castles is a desirable yet difficult task with no established framework. Although 3D digitizing and modelling with laser scanners, Photogrammetry, and computer aided architectural design (CAAD) are maturing, each alone is inadequate to model an entire castle in details. We present a sequential approach that combines multiple techniques, each where best suited, to capture and model the fine geometric detail of castles. We provide new contributions in several areas: an effective workflow for castle 3D modelling, increasing the level of automation and the seamless integration of models created independently from different data sets. We tested the approach on various castles in Northern Italy and the results demonstrated that it is effective, accurate, and creates highly detailed models suitable for interactive visualization. It is also equally applicable to other types of large complex architectures.
series	journal
last changed	2007/08/29 16:23

_id	ascaad2007_052
id	ascaad2007_052
authors	Hamza, N. and M. Horne
year	2007
title	Building Information Modelling: Empowering Energy Conscious Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 661-670
summary	The increasing awareness of climate change and carbon dioxide emissions from the built environment is resulting in the need to visualize the environmental performance of buildings. One of the recent drivers in the UK has been the tightening of building regulations relating to energy consumption in buildings, mandating all buildings to be performance evaluated by accredited environmental simulation tools to test their carbon dioxide emission against set targets. Currently there is major confusion on all levels from architects to building control officers and contractors on how to engrain energy consciousness principles in the design and construction of buildings. Within this context, ‘Building Information Modelling’ that is linked to ‘Building Performance Modelling’ is increasingly being looked upon as a tool to facilitate the communication between the design team and contractors and to provide a transparent information model on the specification and targeted energy consumption of all new/ refurbished buildings to all parties involved. In this paper, analysis of the benefits and drawbacks of current efforts to combine those two comprehensive databases will be investigated. A sample of main software development companies, architects and contractors, using semi-structured interviews is undertaken to find out how Building Integrated Modelling (BIM) and Building Performance Modelling (BPM) can support the design and construction teams to deliver energy conscious buildings.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ijac20075406
id	ijac20075406
authors	Iordanova, Ivanka
year	2007
title	Teaching Digital Design Exploration: Form Follows
source	International Journal of Architectural Computing vol. 5 - no. 4, pp. 685-702
summary	This paper presents some challenges of teaching computational geometry to architectural students, and proposes a multi-level pedagogical scheme introducing associative geometry and parametric modeling/design into architectural design education. It reports on two pedagogical experiences: one held in the context of a spatial geometry course in the first year of education; and another one, in a digital design studio with third-year architectural students. More specifically, it discusses the impact on design exploration of a library of interactive referents models introduced into the architectural studio. Situated in the 'performance' paradigm of digital design methods, they allow for design object explorations based on modification of architecturally meaningful features (structural, environmental, functional, etc.). The form of a design object can thus 'follow' function, structure, or even sustainability. The digital methods and the design knowledge transferred by the interactive models, together with their visual nature, are found to amplify the processes of 'seeing-as' and the 'reflective conversation with the situation' considered essential for creative design.
series	journal
email
last changed	2008/02/25 20:30

_id	ascaad2007_053
id	ascaad2007_053
authors	Islami, S.Y.
year	2007
title	Surface-driven architecture: Moving Beyond the Ornament/Structure Opposition
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 671-682
summary	Contemporary architecture has been influenced by a shift of interest from the dialectic Derridean theories of language to those of Deleuze and Guattari who put more emphasis on transitions, experimentation and material presence. New digital design tools as well as new construction materials have opened up more possibilities for architects. E-paper, digital screens, printed concrete, composite polymers and dynamic cladding systems, have allowed designers to relish architecture at the surface level. Moreover, the process of architectural design is shifting from the desktop to the virtual world of the computer. NURBS, Blobs, Metaforms, Isomorphic Surfaces and other complex geometries are now possible using surface-driven computer modelling software. Because of this, the resultant architecture display a much more distinct appreciation and mastery of surface-effects. The following article argues that contemporary architecture is becoming increasingly a process of surfacing, both as a process of revealing and as a process of concealing. Surface, in common parlance, is generally understood as the exterior boundary of things, the outer skin of any object. In this sense, surfaces are actual, material, textural entities that we often encounter first. The surface is also taken to be something that conceals: “it was not what it appeared to be on the surface.” However, it is when things surface that they become evident or apparent; they appear out of a previously concealed existence or latency. Thus, surfacing is a process of becoming explicit, of becoming experientially apparent in a movement from virtuality to actuality. This article argues that the use of emerging computer technologies in architecture, have resulted in a renewed prioritization of surface and surface-effects. It shall be concluded that the surface-driven nature of most contemporary modelling software has resulted in a new approach to architectural design, one that has the potential of subverting the traditional hierarchy between ornament and structure. As a result, this design strategy has allowed for a much more spirited and creative approach to architecture.
series	ASCAAD
email
last changed	2008/01/21 22:00

For more results click below: