Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_233
id	caadria2007_233
authors	Hoseini, Ali Ghaffarian; Rahinah Ibrahim
year	2007
title	Using Social Network Analysis for Visualising Spatial Planning During Conceptual Design Phase
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.i8r
summary	Spatial diagramming exercises with clients are difficult when most clients are not able to visualize the end results of their requirements. This paper would like to introduce a computational tool—Social Network Analysis (SNA)—commonly used in the communications field to study relationships between people we believe can resolve this visualization problem. Our research intent is to affirm whether or not we can use SNA as a spatial planning tool during conceptual building design. We posit that since the nodes and structural relationships between the nodes may have similar architectural characteristics, the tool would enable architects to make changes by moving any spaces on a floor plan while safely maintaining their spatial relationships to other spaces. In this paper, we would like to develop a proof-of-concept model using an available SNA tool to facilitate spatial diagramming visualization during conceptual design phase. We tested the use of a SNA tool at four levels. The first level determined whether we could develop spatial relationship between functional spaces (such as the living room must be adjacent to the front entry). The second level is on setting priorities values for the different nodes and the linkages. The third level determined whether we could develop grouping relationship between several functional spaces that have a common characteristic (such as public versus private spaces) on one horizontal plane. The final fourth level determined whether we could develop multiple layers that are connected by one common connector (such as a staircase in a double-story house). Our models are validated intellectually by visual comparison between our model and another diagramming by Nooshin (2001) that was developed manually. We are most interested in the fourth level because complexity in the spatial diagramming exercises is caused by multi-layered spatial arrangements at the horizontal and vertical planes. We expect our study to provide us guidelines in developing a prototype for a spatial diagramming tool using SNA, which architects can use to resolve visualization problems when conducting the exercise with their clients.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_032
id	ascaad2007_032
authors	Othman, A. and A. Al-Attili
year	2007
title	Re-Placing Embodied Interaction: Palestinian Architects Virtual Community
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 381-398
summary	Our ongoing project Palestine Architects Platform (PAP) –and PAP VE is a project intended to re-bond Palestinian architects and facilitate communication between them in Virtual Environments “virtual land” using virtual means. We used it as an example to argue that its inherently embedded spatial metaphor could compensate for the physical disconnectedness, and allow interaction on many different levels. Our paper proposes an interactive archiving and networking location where discourse is not only stored but categorised, analysed, retrieved and used to start new topics, or can be used to improve new debates. The focus is on the social values of PAP network and its empowering nature. The design and the structure is not simply a system for online socialisation rather it is a result of thoroughly studying available networks and their principles. It is a result of deep analysis of reality behind this community. We finally propose a set of principles that can secure a real innovative and creative knowledge exchange.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_033
id	ascaad2007_033
authors	Sheta, S.A.
year	2007
title	Collaborative Design as an Experimental Multidisciplinary Approach to Develop Computer Aided Architectural Design (CAAD) Courses
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 399-414
summary	This study demonstrates an overview of the state of teaching Computer Aided Architectural Design (CAAD) in the Department of Architecture, Misr Academy for Engineering and Technology (MET). This course is basically designed to enable students to explore new ways of design using Computer Aided Architectural Design software. In hypothetical valuation analysis, the study examines the necessity of combining ICT with architectural courses’ teaching in a collaborative design manner. In this sense, it tackles an experimental multidisciplinary approach to develop CAAD courses. It focuses on the innovation of the course by the introduction of ICT both in the contents of the course and as a means of education. To attain its goals stated above, the paper discusses the differences between teaching CAAD by using standard software and teaching the principles of CAAD. It distinguishes four-interdisciplinary system of application for collaborative design in education: social systems, professional systems, educational systems, and innovative systems. This exploration is seldom backed up from a design methodological viewpoint. The conclusion shows how the developed CAAD course, when taught in combination with ICT and collaborative design approaches may result in favorable learning outcomes.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_215
id	ecaade2007_215
authors	Boytscheff, Constantin; Sfeir, Marilu Kanacri
year	2007
title	Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
doi	https://doi.org/10.52842/conf.ecaade.2007.091
summary	The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords	Urban planning, virtual reality, immersive, teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	bsct_kourkoutas
id	bsct_kourkoutas
authors	Kourkoutas, Vassilios
year	2007
title	Parametric Form Finding in Contemporary Architecture
source	Vienna University of Technology; Building Science & Technology
summary	The search of new geometry has been during the last years an interesting subject for Contemporary Architecture. As the 21st century brought a new era for architectural design, CAD programs have evolved together with the idea of Form Finding. The possibilities offered make the collaboration of the architect with the computer now possible in terms of searching the appropriate form for given cases. As the analysis of contemporary architectural pieces has indicated, the procedure of architectural design can be semi-automated. Parametric Form Finding is transferring generative approaches into the architectural design workflow by introducing a set of rules to describe the constrains of the form. Given this context, two methods have been realized, which are guided by the user by providing basic two dimensional shapes, restrictions and form characteristics. The approach is fitted in a plug-in for the modeling environment of Rhinoceros that generates three dimensional form based on the user?s input. The methods followed are being evaluated.
keywords	Parametric, Form Finding, Rhinoceros, plug-in
series	thesis:MSc
type	normal paper
email
more	http://cec.tuwien.ac.at
last changed	2007/07/22 15:29

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	cf2011_p157
id	cf2011_p157
authors	Boton, Conrad; Kubicki Sylvain, Halin Gilles
year	2011
title	Understanding Pre-Construction Simulation Activities to Adapt Visualization in 4D CAD Collaborative Tools
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 477-492.
summary	Increasing productivity and efficiency is an important issue in the AEC field. This area is mainly characterized by fragmentation, heterogeneous teams with low lifetimes and many uncertainties. 4D CAD is one of the greatest innovations in recent years. It consists in linking a 3D model of the building with the works planning in order to simulate the construction evolution over time. 4D CAD can fill several needs from design to project management through constructivity analysis and tasks planning (Tommelein 2003). The literature shows that several applications have been proposed to improve the 4D CAD use (Chau et al. 2004; Lu et al. 2007; Seok & al. 2009). In addition, studies have shown the real impact of 4D CAD use in construction projects (Staub-French & Khanzode 2007; Dawood & Sika 2007). More recently, Mahalingam et al. (2010) showed that the collaborative use of 4D CAD is particularly useful during the pre-construction phase for comparing the constructability of working methods, for visually identifying conflicts and clashes (overlaps), and as visual tool for practitioners to discuss and to plan project progress. So the advantage of the 4D CAD collaborative use is demonstrated. Moreover, several studies have been conducted both in the scientific community and in the industrial world to improve it (Zhou et al. 2009; Kang et al. 2007). But an important need that remains in collaborative 4D CAD use in construction projects is about the adaptation of visualization to the users business needs. Indeed, construction projects have very specific characteristics (fragmentation, variable team, different roles from one project to another). Moreover, in the AEC field several visualization techniques can represent the same concept and actors choose one or another of these techniques according to their specific needs related to the task they have to perform. For example, the tasks planning may be represented by a Gantt chart or by a PERT network and the building elements can be depicted with a 3D model or a 2D plan. The classical view (3D + Gantt) proposed to all practitioners in the available 4D tools seems therefore not suiting the needs of all. So, our research is based on the hypothesis that adapting the visualization to individual business needs could significantly improve the collaboration. This work relies on previous ones and aim to develop a method 1) to choose the best suited views for performed tasks and 2) to compose adapted multiple views for each actor, that we call ‚Äúbusiness views‚Äù. We propose a 4 steps-method to compose business views. The first step identifies the users‚Äô business needs, defining the individual practices performed by each actor, identifying his business tasks and his information needs. The second step identifies the visualization needs related to the identified business needs. For this purpose, the user‚Äôs interactions and visualization tasks are described. This enables choosing the most appropriate visualization techniques for each need (step 3). At this step, it is important to describe the visualization techniques and to be able to compare them. Therefore, we proposed a business view metamodel. The final step (step 4) selects the adapted views, defines the coordination mechanisms and the interaction principles in order to compose coordinated visualizations. A final step consists in a validation work to ensure that the composed views really match to the described business needs. This paper presents the latest version of the method and especially presents our latest works about its first and second steps. These include making more generic the business tasks description in order to be applicable within most of construction projects and enabling to make correspondence with visualization tasks.
keywords	Pre-construction, Simulation, 4D CAD, Collaboration, Computer Supported Cooperative Work, Human-Computer Interface, Information visualization, Business view, Model driven engineering
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2007_043
id	ascaad2007_043
authors	Chen, G.-Y. M.
year	2007
title	Tagging Your Body Virtually : Represent a place making process with social network
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 543-558
summary	This research focuses on the virtual environment of place making. In this paper we would like to emphasize that the place making should be stressed collective views in order to obtain the design application of possibilities. However, in past researches there has been no study that tried to collect the collective views by digital ways. Accordingly, this paper proposes a response thought the Spatial Intention. It could be used to represent the human of body experience. The "moving" and "standing" are appropriate to two main considerations. Both of these could be connected to the action of "focus" and "choice." these leads to a sequential relationship of place production. The positive significance of the spatial intention lies in the convertibility of physical experience could be implied with a specific understanding. It also could be used to mold the place of knowledge structure. Thereby in order to verify the reliability of the above, we made a social network of virtual environment and used the rapid prototyping method to develop a prototype system. Implementing on the Chinese garden of the actual case, we found that the tag could concentrate as an entire sense in somewhere of place. These tags also could be shared remotely through the social network. Different tags in the sharing mechanism could collage out a place of collective views. This perspective would be used to assist designers to understand the sense of place. It also would be applied to find out the environmental design of possibilities in the future studies.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_069
id	caadria2007_069
authors	Chiu, Hao-Hsiu
year	2007
title	Telepinup System: Supporting Dynamic Remote Interaction in Design Reviews
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.u1d
summary	This paper addresses a pilot study in proposing a series of interface design solutions as integrated parts of a virtual communication space prototype: Telepinup System, which intends to enhance dynamic and seamless experiences for distributed architectural design discussions through digital interaction. Aiming to support graphic-centered, nonlinear, and contextual way of visualverbal communication suitable for design discussion, the prototype tool is developed to demonstrate various interface solutions and to be evaluated within the actual use contexts in two user experiments for its efficiency and effectiveness of underlying design criteria and proposed solutions. Interaction patterns during the experiments are recorded in the database and immediately visualized at the end of each test for participants to give instant feedback and for later analysis. The initial result shows that the collaboration between some critical interface solutions helps seamlessly synchronize graphical, verbal and social information exchange.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_060
id	ascaad2007_060
authors	Gillispie, D. and C. Calderon
year	2007
title	A framework towards designing responsive public information systems
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 767-782
summary	"Evolving effective responsive systems, and creating a credible interface between the work and the user, requires an awareness of many different types of user, contexts and functions as well as the phenomenological aspects of social and environmental conditions." (Bullivant, 2006). Responsive design and interactive architecture operates at the intersection of Architecture, Arts, Technology, Media Arts, HCI and Interaction Design in a physical context suggesting ways in which the existing physical environments can be augmented and extended adding a greater level of depth, meaning and engagement with the world around us. Through a series of case studies, this paper explores a number of principles which may be applied to the design of responsive environments of which public information systems form part. Divided into three main sections, the paper first explains how responsive environments have addressed the application of public information systems, secondly, through a series of case studies, precedents are highlighted which lead to development of principles for developing designs for responsive environments. The third section discusses and elaborates on these principles which have been developed based upon our own interpretations and grouping of precedents and approaches towards interaction design. This paper contributes towards the field of responsive environments and interactive architecture through an analysis of case studies to infer a framework from which responsive environments may be created and developed.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2007_000
id	sigradi2007_000
authors	Maganda Mercado, Adriana Gómez (et. al)
year	2007
title	Sigradi 2007: Communication in the Visual Society [La Comunicación en la Comunidad Visual]
source	Proceedings of the 11th Iberoamerican Congress of Digital Graphics Graphics / ISBN 13 978-968-7451-15-2] México D.F. - México 23-25 October 2007, 467 p.
summary	In a simple communication model we must talk about the understanding between participants. This is the result of a continuing connection and a dialog of agreements and disagreements in order to arrive at sharing an idea. However, society today is in an evolutionary lapse at an accelerated pace that interjects itself in this process. It is here where social forces distend and generate important ruptures between generations and individuals that fight to prevail or impose new languages and lifestyles. Today's society has become a visual society whose effect has been reinforced through technology in the devices that we use on a daily basis. The daily use of technology and its new languages has marked a disconnection between individuals that must be closed by using a new acculturation and teaching models. Disconnection is a omnipresent modern phenomenon that can be felt as the main effect in what specialists call the digital gap. This gap not only separates generations, but also ideologies with respect to the form in which we perceive, transmit and teach in our society today. This disconnection can be easily understood through a school system that has been designed for a manufacturing and agricultural world. However, many sectors within our society have been in state of constant change and evolution. This situation generates many opportunities where an agile society is required in response to these new local and global challenges. The students of today have, for example, multi-tasking abilities that better assimilate these changes. The researchers, Ian Jukes and Anita Dosaj refer to this disconnection as the result of poor communication between digital natives (our present-day students) and digital immigrants (many present-day adults). This phenomenon results in the fact that parents and educators speak the digital dialect as a second language, and because of that are lacking in their models of communication. For example, digital natives prefer a variety of sources with rapid access, while the digital immigrants prefer slower, more controlled sources that are limited and regulated. Nowadays, our educational or production activities in which we find ourselves immersed on a daily basis cause us to participate in a wide range of processes of production, dissemination and analysis of visual forms as part of our final product or service. Much of the work that we elaborate in movies, video and photography explore meaning, perception and communication in context as well as anthropological and ethnographic themes. Using this framework for our society today, the importance of the search for the promotion of the study of visual representation and the media for the greatest development and generation of benefits is brought to the fore. Through the use of images we can describe, analyze, communicate and interpret human behavior. All these settings, full of digital disconnections and reencounters, impact on all the visual aspects of culture, including art, architecture and material objects, influencing the bodily expressions of human beings. We have created a visual society when we put emphasis on the meaning and interpretation of all we receive through our visual sense. Wherever we look, we find objects that have been modified beyond their primary function to communicate messages. In this ecosystem we are consumers and suppliers. The communication and research needed to achieve reconnection, as well as the creation of new forms of production and visual understanding, are the themes on which the works contained in this edition are centered.
series	SIGRADI
type	normal paper
more	http://www.sigradi.org
last changed	2016/03/10 09:55

_id	sigradi2007_af112
id	sigradi2007_af112
authors	Pereira Guimarães, Celso
year	2007
title	Virtual Reality and the Visual Image [Realidade Virtual e Visualidade na Imagen]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 78-82
summary	This work proposes the studies of Virtual Reality (VR) as a potential system for developing methodologies for projects in IOS – Information and Orientation Systems for environmental graphics of enclosed public places, wherein the social complexity is demanded by and for different social levels. Indeed, it embraces the studies of the icon visual retraction between the 3D environments to the 2D reality, considering the computer media as a bi dimensional support. This method allows implementing experiences in sensorial, accuracy and analysis of ergonomics on IOS projects.
keywords	Virtual; Image; Visual; IOS; Environment
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2007_519
id	caadria2007_519
authors	Porter, David; Raid Hanna
year	2007
title	An Empirical Investigation into the Influence of Media Types on Design Cognition and Methodologies
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.x4b
summary	This paper reports on the findings of an empirical investigation into the impact of different media on design methodology. The statistical sample included 49 fourth year architecture students, divided into three groups: the drawing group, the physical model group and the computer group. They were given a problem of designing a façade in an urban context in Glasgow over a two week period. The design process of each group was monitored over that period through observations, recordings and attitude measurement via a questionnaire survey. The results were analysed using the Statistical Programme for Social Sciences (SPSS). The dendrograms from cluster analysis revealed that there were well established perceptual dimensions, or clusters, for the façade’s design variables within the three groups because of using different media. The impact of media on design creativity, both as a process and a product, was investigated. All three media types yielded a positive correlation between ‘media made design decisions more creative’ and ‘media made design scheme more creative’- with a correlation coefficient of 0.708 which was significant at the 0.01 level, p<0.05.
series	CAADRIA
last changed	2022/06/07 07:50

_id	ecaade2007_162
id	ecaade2007_162
authors	Ramirez, Joaquin; Russell, Peter
year	2007
title	Second City
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 359-365
doi	https://doi.org/10.52842/conf.ecaade.2007.359
summary	In the era of communication, the participation in internet-communities has grown to become a motor for innovation in software and community platforms. The paper describes the hypothesis that, by creating a virtual city (or a second city) a new type of social, economic and scientific network is established, which is supported through visual communication technologies. The various users bring, per se, their own intrinsic motivation and requirements to the system. Nonetheless, a personal identification with a city/neighbourhood/house/apartment can be used to awake awareness and to foster participation. This is especially important when dealing with the city inhabitants. City modelling itself has been carried out for over a decade. Projects such as the city model of Graz have shown how city models can be established so as to be scalable for new information (Dokonal et al 2000). Furthermore, these city models have been used in the education of future architects and urban planners. The project described here moves in the opposite direction: the model moves out of the classroom to an interdisciplinary city-model-platform. The work described here is the conceptual model for a multi-dimensional data set that models the city. This has spawned a host of other projects using the model as a foundation for further interactivity development and the extension of the model itself. The paper describes the structure of the conceptual model and the first experience of incorporating diverse projects such those mentioned above. The model also is structured so as to be compatible with the XML standards being developed for city information (CityGML). The goal of the project is to create a data set describing the city that not only describes the geometry, but also the history (including planned histories) and nature of the city. In contrast to virtual realities, which attempt to create a separate world (e.g. Second Life), the Second City is intended as an interdisciplinary repository for the geometrical, historical and cultural information of the city.
keywords	City modelling, virtual environments, web 2.0
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2007_289
id	caadria2007_289
authors	Sawasratanathon, Putthinun; Pinyo Jinuntuya
year	2007
title	Collaborative Cooling Load Analysis Software for Public Participation on Energy Conservation
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.o0s
summary	This article is part of a research on developing cooling load analysis software for energy conservation. This research focuses on developing the system of Collaborative Design and Public Participation System which allows property owners, architects, engineers as well as others outside the field, to contribute to design process based on the concept of energy conservation within the collaborative virtual environment. The combination of the two ideas between collaborative virtual environment and Analysis Engine of cooling load calculation changes the traditional working processes in which architects and engineers work separately. From the traditional process where both architects and engineer redevelop the whole project from the beginning when redesigning is in need, this new collaborative process requires less time and energy from both parties due to the simultaneous participation of architects, engineers as well as other contributors. In this research, Microsoft© Direct3D® - API based Virtools® is used to develop Real-Time Simulation and its internal script in the calculation process. Through the implementation process, the study aims to develop the 3 components of 1) urban area database illustrating simulating maps for users 2) Graphic User Interface (GUI) connected to other software modules for further expansion and 3) Virtual Network Environment allowing multiple users to log in and use the programme at the same period of time.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	acadia07_048
id	acadia07_048
authors	Vollen, Jason; Clifford, Dale; Winn, Kelly; Gindlesparger, Matt
year	2007
title	Digital Fabric: Generating Ceramic Catenary Networks
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 48-55
doi	https://doi.org/10.52842/conf.acadia.2007.048
summary	Digital modeling in the design environment has prompted intuitive shaping of architectural form. The pliability of the imagination allows limitless possibilities of shape without a constrained methodology. This paper chronicles a design exploring catenary form-finding using parametric constraints in a dynamic modeling environment. Catenary structural networks are treated as digital cloth objects. Applying parametric edge and point constraints simulates various behavior patterns under gravity load. The integration of real-time Finite Element Method [FEM] and dynamic cloth simulation presents an intuitive method for the design and analysis of catenary structures. Constraints resist the limitless pliability of shape and hone the intuition using force to find form realized as a ceramic catenary network.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ascaad2007_012
id	ascaad2007_012
authors	Zeile, P.; F. Farnoudi and B. Streich
year	2007
title	Fascination google earth – use in urban and landscape design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 141-148
summary	Virtual 3D-City-and Architecture models, Virtual Globe systems like NASA World Wind and Google Earth as well as new attempts of immersive technologies become more important, not only among experts in spatial planning, but also many private users are interested in these new tools. These developments cause powerful impacts in the general social, cultural and everyday life. Given the dynamic development of Google Earth, the discussion about the representation and the use of geodata for a wide user group - beyond the planning disciplines - reaches new heights. According to expert's opinion, Google Earth with its computer language KML (Keyhole Markup Language) becomes a 3D-GIS-Standard [Rush in 2006]. By the easy and quick representation of three-dimensional (city) structures and single buildings, Google Earth will significantly influence all groups of society. User groups which have not been acquainted with geodata or highly specified and complex GIS-Systems [Dworschak in 2006], discover that working with this data by using Google Earth is great fun. They recognize, that with the help of generally understandable and easily recognizable visualisation of these data, mediation of knowledge becomes very easy. In addition, it is acknowledged that geodata has great potential to add value, in disciplines such as the academics, the financial sector or personal use.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2007_347
id	cf2007_347
authors	Caneparo, Luca; Mattia Collo, Alfonso Montuori and Stefano Pensa
year	2007
title	Urban Generator
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 347-360
summary	The paper presents an ongoing project to interactively simulate urban and regional dynamics at the building scale. Urban Generator is a system for generating a large number of design solutions and for browsing, searching and structuring the high-dimensional space of the design solutions further to variable and customisable factors defined by the designer. The number of these factors is recognised as large; furthermore they are often ill-defined. Urban Generator does not model every factor; instead it supports the designer in defining the significant factors and their interconnections, then freely exploring the dimensions of the space of the design solutions generated by the system.
series	CAAD Futures
email
last changed	2007/07/06 12:47

For more results click below: