Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 518

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_677
id	caadria2007_677
authors	Anbusivan, R.
year	2007
title	Automation of Passive Solar Design System
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.l5x
summary	This research, focus on the automation of passive solar design system using computational method. The quantitative nature of passive solar design system makes the automation possible. The automation is done in stages, because implementing the passive solar design system is not an isolated process, but intertwined with the overall design process. The first phase of automation concentrates in conceptual stage, to avoid major deviations in later stages of the design. The conceptual stage use Eco-grammar (A preset Design guidelines for corresponding climate) and user inputs for initial form generation. The second stage of automation is done after the user finalize the model with respect to its position rotation and arrangements. In this stage manipulation of vertex, edges and faces of the forms were manipulated using genetic algorithm. The value of mutation or crossover done in genetic algorithm is suggested by knowledge engine (preloaded design knowledge). Until the form obtains or reach closer to the desired values of performance the loop between analysis and mutation, crossover will be continued. On the basis of analysis result further manipulations may change from the previous which is guided by the knowledge engine.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
doi	https://doi.org/10.52842/conf.acadia.2007.284
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ecaade2007_143
id	ecaade2007_143
authors	Ulmer, Andreas; Halatsch, Jan; Kunze, Antje; Müller, Pascal; Gool, Luc Van
year	2007
title	Procedural Design of Urban Open Spaces
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 351-358
doi	https://doi.org/10.52842/conf.ecaade.2007.351
summary	This paper presents a novel approach for the automatic creation of vegetation scenarios in real or virtual 3D cities in order to simplify the complex design process and time consuming modeling tasks in urban landscape planning. We introduce shape grammars as a practical tool for the rule-based generation of urban open spaces. The automatically generated designs can be used for pre-visualization, master planning, guided design variation and digital content creation in general (e.g. for the entertainment industry). In a first step, we extend the CGA shape grammar by Müller et al. (2006) with urban planning operations. In a second step, we employ the possibilities of shape grammars to encode design patterns (Alexander et al., 1977). Therefore, we propose several examples of design patterns allowing for an intuitive high-level placement of objects common in urban open spaces (e.g. plants). Furthermore, arbitrary interactions between distinct instances of the vegetation and the urban environment can be encoded. With the resulting system, the designer can efficiently vegetate landscape and city parks, alleys, gardens, patios and even single buildings by applying the corresponding shape grammar rules. Our results demonstrate the procedural design process on two practical example scenarios, each one covering a different scale and different contexts of planning. The first example illustrates a derivation of the Garden of Versailles and the second example describes the usage of high-level rule sets to generate a suburbia model.
keywords	City modeling, design methodology, generative design, simulation, virtual environments
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2007_037
id	caadria2007_037
authors	Wutthikornthanawat, Worawut; Pinyo Jinuntuya
year	2007
title	Multi-User Tangible Interface for Public Participation Development of Low-cost Housing Project Design and Planning
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.k4b
summary	This paper proposes the community-based computer aided design and cost estimation software development for low-cost housing project. The content attempts to create a new user interface system by participating access to multi-user tangible interface system for community members. To solve the problem of presentation media change form that watched through computer monitor or projector into conference surrounding creation about a requirements of collaborative design group on the surface using interactive drag and drop device according to suit the life style pattern of the housing. The method of design is as follow; developed using virtools® for design, planning and estimation overall project as define community planning, housing planning, construction, and appropriate financial capacity of the users that base on developed community sustainable.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_058
id	ascaad2007_058
authors	Abdelhameed, W. and Y. Kobayashi
year	2007
title	Developing a New Approach of Computer Use ‘KISS Modeling’ for Design-Ideas Alternatives of Form Massing: A framework for three-Dimensional Shape Recognition in Initial Design Phases
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 745-756
summary	This research aims at developing a new approach called ‘KISS Modeling’. KISS is generally a rule of ‘Keep It Simple, Stupid’ that will be applied in modeling process investigated and presented by the research. The new approach is implemented in a computer program ‘KISS Modeling’ that generates three dimensional forms based on simplifying the concept of shape recognition in design. The research, however, does not employ totally concepts of shape recognition or shape understanding in Artificial Intelligence and psychology. The research, in summary, investigates and describes: 1) a new approach of computer use contributing to generating design-ideas alternatives of form massing in initial design phases, within a simple way that any designer can understand at single glance, 2) implementation of shape recognition for generative three dimensional forms, 3) function to generate different outputs from different recognition, and 4) case studies introduced through applications and functions of the three dimensional modeling system presented by the research. The research concluded that the introduced processes help the user improve the management of conceptual designing through facilitating a discourse of his/her modeling of design-ideas massing.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_226
id	ecaade2007_226
authors	Agger, Kristian; Lassen, Michael; Knudsen, Nikolaj; Borup, Ruben; Rimestad, Jens; Norholdt, Peter; Bramsen, Nikolaj
year	2007
title	B-processor
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 43-50
doi	https://doi.org/10.52842/conf.ecaade.2007.043
summary	The B-processor is a redesign of the digital building information modelling/managing concept: Addressing the whole building industry participants and all phases in the building process. Offering a new “standard” for digital building information structure with generic modelling and evaluation tools in the B-model kernel. Plug-in structure for free extension of the B-processor system by the Building Industry. Kernel prototyped in Java to be downloaded for free – open source.
keywords	Digital applications in construction, digital fabrication and construction, prediction and evaluation, design methodology, generative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2007_035
id	ascaad2007_035
authors	Al-Ali, A.I.
year	2007
title	Readiness for the Use of Technology for effective learning via the vds: Case of the United Arab Emirates
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 439-456
summary	Review of the literature indicated that today’s knowledge-driven economy demands a workforce equipped with complex skills and attitudes such as problem solving, meta-cognitive skills, critical thinking and lifelong learning. Such skills can be acquired if learning and teaching are guided by the constructivist and cognitive learning theories. In particular, the constructivist approach emphasises effective learning processes based on learning by doing and collaboration. This approach is congruent with use of technologies, such as Virtual Design Studio (VDS), for the purpose of architecture education in design courses, but such use is lacking in the United Arab Emirates (UAE). It is thus important to assess the extent to which the constructivist and cognitive theories are implemented in teaching design courses in the Architecture schools of the UAE. It is also important to assess the effectiveness of employing technology in general and VDS in particular in implementing these theories. The author intends to study the relationship between effective learning on one hand and using VDS in implementing the constructivist and cognitive approaches on the other hand. Thus, the author conducted a preliminary study to gain a basic understanding of the difficulties, approaches, attitudes, perceptions, and motivation related to the learning of design in architecture schools in the UAE. Second, the investigation was designed to assess the extent to which the students would be interested in the use of sophisticated technology in the teaching and learning environment in the UAE architecture education schools in order to achieve effective learning. The study has been conducted in the United Arab Emirates University (UAEU). Methodology used for this was the focus group method. In addition to the focus group interviews with the UAEU students, unstructured individual interviews with lecturers from UAEU and the American University of Sharjah (AUS) have been carried out. Data analysis showed that students were not satisfied with the current teaching methods based on traditional lectures. It was concluded that students were ready to practice effective learning of design via the intermarriage of VDS and the constructivist and cognitive approaches. An ambiguity that remained was whether students were ready for assessment methods which are consistent with the constructivist approach.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ascaad2007_038
id	ascaad2007_038
authors	Bakr, A.F. and D. Saadallah
year	2007
title	Strategic planning through Mapping of Water pollution in Lack of information system utilizing geographic information system (GIS): Lake Maryout, Alexandria, Egypt
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 479-490
summary	Strategic planning always requests supporting tools to defeat lack of data problems, which is a common drawback in our planning system as a result of several reasons. This paper is an extensive overview of the recent application of Geographic Information Systems (GIS) in the domain of water contamination in lakes. The authors try to establish a GIS mapping technique, which is customized for Lake of Maryout in Alexandria city, Egypt demonstrating various GIS analysis techniques/approaches applied to a diversity of real-life engineering endeavors in the water contamination control management sector in a lack of data system. First, the reader is concisely acquainted with the major steps of utilized mapping technique and how they are conducted. Second, the technique would be applied to define degree of water pollution distribution in Lake of Maryout. Finally, the output maps would be analyzed to delineate a quick and long term strategy of solution.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ascaad2007_039
id	ascaad2007_039
authors	Bakr, A.F.; I. Diab and D. Saadallah
year	2007
title	Detecting Inefficient Lighting Solutions: Step-by-Step Geographic information system (GIS) Technique
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 491-504
summary	Outdoor lighting is used to illuminate roadways, parking lots, yards, sidewalks, public meeting areas, signs, work sites, and buildings. It provides us with better visibility and a sense of security. When well designed and properly installed, outdoor lighting can be and is very useful in improving visibility and safety and a sense of security, while at the same time minimizing energy use and operating costs. But, because nobody thought at this, most street lights shine light not only on the nearby ground, where is needed, but also miles away and skywards. Thus a large fraction of the light is lost, at consumer expense and without his/her consent. In the other hand, shortage in street light may cause more crimes as well as accidents. Most of the wasted or short light comes from the poorly designed street lights. Billboards, decorative lights, poorly shielded security lights are part of the problem too, but the main culprit for the waste and ugly glow one sees above one's head at nights is from the streetlights. Thus, recent computer technology gives us tools to be employed for testing the quality of light. Geographic Information System (GIS) software could be utilized to achieve that mission through applying mapping technique. This technique could analyze digital photographs and define light polluted areas as well as bad lighted. This paper reveals that step by step technique, which employs hybrid technologies to solve such problem for better planning decisions.
series	ASCAAD
last changed	2008/01/21 22:00

_id	sigradi2007_af91
id	sigradi2007_af91
authors	Baltazar, Ana Paula; Denise Morado Nascimento; Silke Kapp; Rodrigo Santos Marcandier Gonçalves; Sulamita Fonseca Lino; Amanda Alves Olalquiaga; Joana Vieira da Silva; Felipe José Gontijo; Mara Coelho; Pedro Arthur Novaes Magalhães
year	2007
title	The intellectual property in digital interfaces and environments: The noncopyright option in the case of IDA system [A propriedade intelectual em ambientes e interfaces digitais: A opção pelo noncopyright no caso do sistema IDA]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 463-466
summary	This paper presents the discussions on intellectual property regarding digital interfaces, which were crucial for MOM/LOW (Living in Other Ways) to develop the system IDA (Digital interface for supporting housing production). It introduces IDA and its conceptual framework and differentiates intellectual property and authorship. Then, it examines the arguments for copyright, indicating them as myths or disguises of other intentions. This leads to examining some anti-copyright movements concluding that they follow the same logic of register. Thus, noncopyright (no license or register) seems to be the best means to protest against the current logic as also for conveying information.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_055
id	ecaade2008_055
authors	Beirão, José; Duarte, José; Stouffs, Rudi
year	2008
title	Structuring a Generative Model for Urban Design: Linking GIS to Shape Grammars
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 929-938
doi	https://doi.org/10.52842/conf.ecaade.2008.929
summary	Urban Design processes need to adopt flexible and adaptive procedures to respond to the evolving demands of the contemporary city. To support such dynamic processes, a specific design methodology and a supporting tool are needed. This design methodology considers the development of a design system rather than a single design solution. It is based on patterns and shape grammars. The idea is to link the descriptions of each pattern to specific shape rules inducing the generation of formal solutions that satisfy the pattern. The methodology explores, from the urban designer point of view, the capacity of a shape grammar to codify and generate urban form (Duarte et al, 2007). This paper defines the ontology of urban entities to build on a GIS platform the topology describing the various components of the city structure. By choosing different sets of patterns the designer defines his vision for a specific context. The patterns are explicated into shape rules that encode the designer’s interpretation of the pattern, and operate on this ontology of urban entities generating solutions that satisfy the pattern’s concept. Some examples of the topological relations are shown.
keywords	Patterns, shape grammars, ontology, generative urban design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2007_022
id	ascaad2007_022
authors	Belkaid, A. and A. Ben Saci
year	2007
title	A multi-agent system for the formulation of architectural terms of references
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 261-272
summary	This work aims to use the multi-agent systems, permitting to coordinate the behavior of intelligent artificial agents, in order to help the architect at the first moments of the conception. We proceed by modelling the architectural terms of reference, using the concept of primary architectural system, to manage the initial information. This modelling process proposes a new formulation of this system based on the agent paradigm.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	cf2007_153
id	cf2007_153
authors	Benrós, Deborah; José P Duarte and Fernando Branco
year	2007
title	A System for Providing Customized Housing
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 153-166
summary	This paper describes a system for generating customized mass housing. The aim is to provide dwellings at an affordable cost with recourse to mass production and yet guarantee that they are tailored to their users. It combines two systems, a rule-based design system and a prefabricated building system. The integration of both systems is achieved through the development of a computer tool to assist designers in the various stages of the housing design process. This tool produces three kinds of outputs: three dimensional models, construction drawings, and a list of construction elements, including their cost and information for manufacturing.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	ascaad2007_016
id	ascaad2007_016
authors	Biloria, N.
year	2007
title	Developing an Interactive Architectural Meta-System for Contemporary Corporate Environments: An investigation into aspects of creating responsive spatial systems for corporate offices incorporating rule based computation techniques
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 199-212
summary	The research paper exemplifies upon an attempt to create a co-evolving (socio-cultural and technological) programmable spatiality with a strong underpinning in the domain of computation, interaction design and open system typologies for the generation of a constantly informed self-adaptive corporate office space (which addresses the behavioral patterns/preferences of its occupants). Architectural substantiations for such corporate bodies embodying dynamic business eco-systems usually tend to be rather inert in essence and deem to remain closed systemic entities, adhering to a rather static spatial program in accordance with which they were initially conceptualized. The research initiative, rather than creating conventional inert structural shells (hard components), thus focuses upon the development of a meta-system, or in other words the creation of a ‘soft’ computationally enriched open systemic framework (informational) which interfaces with the ‘hard’, material component and the users of the architectural construct (corporate offices). This soft space/meta system serves as a platform for providing the users with a democratic framework, within which they can manifest their own programmatic (activity oriented) combinations in order to create self designed spatial alternatives. The otherwise static/inert hard architectural counterpart, enhanced with contemporary technology thus becomes a physical interface prone to real-time spatial/structural and ambient augmentation to optimally serve its users.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_391
id	caadria2007_391
authors	Biloria, Nimish
year	2007
title	Adaptive Corporate Environments
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.d7a
summary	The research paper illustrates an attempt to envision computation aided architectural responsiveness (spatial and informational) towards contemporary forms of corporate organizations. Architectural substantiations for such corporate bodies embodying dynamic business eco-systems tend to be rather inert in essence and deem to remain closed systemic entities, adhering to a rather static spatial program in accordance with which they were initially conceptualized. Architectural renditions supporting such emergent forms of organizations hence need to be re-thought: a need to break apart from the inherent closed system typology of architectural materiality needs to be visualized. The research paper, addresses such issues by specifically focusing upon developing intelligent reconfigurable spaces (in accordance with customized activity oriented spatial preferences of its occupants) and an interactive user interface as a front end of the system (for inputting preferences and 3d space visualization purposes). A space cluster, completely user centric, equally dynamic, and flexible, as compared to the dynamic activities which the space sustains is thus developed. The papers content is explicitly based on the output of the authors PhD research work conducted at the TU Delft, Netherlands.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_066
id	ecaade2007_066
authors	Boeykens, Stefan; Neuckermans, Herman
year	2007
title	A Generic Data Structure for an Architectural Design Application
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 303-310
doi	https://doi.org/10.52842/conf.ecaade.2007.303
summary	The research described in this paper focuses on the exploration of concepts for design development, to increase support for the early phases of design. This paper investigates and describes how a custom data structure for an architectural design application was set up generically, allowing additional extensions in a straightforward manner. The key concepts and main functionality are presented here, to give insight into the reasoning behind a flexible property system and how additional functionality benefits from this system.
keywords	Design, software development, property system
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2007_215
id	ecaade2007_215
authors	Boytscheff, Constantin; Sfeir, Marilu Kanacri
year	2007
title	Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
doi	https://doi.org/10.52842/conf.ecaade.2007.091
summary	The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords	Urban planning, virtual reality, immersive, teaching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_094
id	ecaade2007_094
authors	Buattour, Mohamed; Halin, Gilles; Bignon, Jean Claude
year	2007
title	Management system for a Virtual Cooperative Project
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 125-131
doi	https://doi.org/10.52842/conf.ecaade.2007.125
summary	The paper presents on-going research aimed at the support of the management of building projects and the aid cooperative design. Today, The use of systems adapted to the cooperative design assistance for the building domain is complex. This results from the complexity of the cooperative work (difficulties in tracking actor’s work, lack of most of the required information, coordination problems, implicit nature of most of the construction activities etc.) The paper will briefly review two data exchanging modes that we had defined. After, on the basis of this concept of cooperative design we describe a new model of a virtual environment aimed to takes into account the relational organization of the project and the semantic meaning of works. This research represents a new approach because it not based on management of documents but on all data relative to works. Finally, we use this new model for defining a design-aided tool, to deduce advantages and limits of the “Virtual Cooperative Project”. This system lets geographically dispersed project actors model the project context of a building. More specifically, it allows interpreting, using and exchanging project works in a centralized virtual environment during the building life cycle. This system uses IFC objects which associate in the same model the semantic and the 3D representation of building works.
keywords	Cooperation model, cooperative work design, project management, digital mock-up
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: