Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 483

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_611
id	caadria2007_611
authors	Arpornwicharnop, Kittisak; Pinyo Jinuntuya and Pizzanu Kanongchaiyos
year	2007
title	Simulation Software Development for Urban Landscape Possibility Analysis
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.u9u
summary	This research paper proposes a simulation software development for possibility analysis of urban landscape development project. Normally, analysis of land potentiality and feasibility study for investment are necessary pre-processed for supporting urban planning, developing and architectural designing. However, most available tools are usually tailor made for each process individually, causing difficulties in information interchange between each processes. In this research, we propose a policy making support system for urban planning project development providing several functions such as testing land use and its physical character which are important to urban expansion and architectural design based on impact analysis of urban comprehensive plan. The proposed integrated system consists of a topological analysis module, constraint checking module and geographical information processing module. First, Geographical information stored in 3D graphic file format is converted to object-oriented data model and stored in a database. With several constraint and regulations, the stored information is then checked in the landscape topological analysis module. In evaluation process, the developed software is tested with geographical information of Bangkok area under constraints and regulations of Building Control Act of Thailand. While controlling building properties, the software can model the buildings and generate urban physical character. The result is then checked by several urban landscape planning experts. Experimental result shows that proposed system provides flexibility in information interchanging with constraints and regulations updating without system reconfiguration. The system also provides internet accessing for public participation in the process of making urban comprehensive plan.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	bsct_fotiadou
id	bsct_fotiadou
authors	Fotiadou, Angeliki
year	2007
title	Analysis of Design Support for Kinetic Structures
source	Vienna University of Technology; Building Science & Technology
summary	This thesis attempts the formation and systemization of a basis of knowledge and information, which is indispensable to turn a design support for kinetic structures into representation by means of a 3d animating program. Representation of kinetic structures by means of the existing ordinary software sources is possible; Nevertheless, such representation lacks of different important features and functions and results eventually in the total absence of a real model of the construction, which is valuable to the user of the program especially in the field of the kinetics, where everything depends on the movement: design not only requires, but demands for visualisation. A personal interest in kinetic architecture and therefore in the physical movement of structural elements in a building, as well as an attempt to “fathom” the possibility of changing this concept to visualization and modern reality by the use of a software are the main incentives of this master thesis. First, a general research will be performed in order to check the existence of similar or semisimilar proposals. The area in which the research will be held is the Bibliography in kinetic architecture and parametric design. A comparison of animation and 3D prototype software in well-known programs will focus on whether virtual weather conditions are considered as a parameter to the animation of the structure of the programs and case studies of several existing kinetic structures will be performed, in order to point out flaws and/or helpful commands in the programs in connection with the presentation of kinetic architecture. Criteria for the choice of the software: ability to customise and to produce geometric modelling, animation in relation to time (video animation) and the simulation after taking into consideration weather factors. Finally, using the computer and the scripting language, based probably on the theory of parametric design and primitive instancing, a realistic simulation of different elements will be performed in relation to variable measurements of luminance, ventilation and temperature so as to render feasible the construction of a whole structure. The results of the thesis will be used in the future as the basic knowledge in the creation of software for simulation of kinetic architecture. This program will be used as a tool for the architect to present a building, where kinetic architecture will be applied and to create simulation of the kinetic movement through a library of the existing prefabricated elements which will be created with the help of this thesis.
keywords	Kinetic architecture, 3D designing software, scripting, programming
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ascaad2007_052
id	ascaad2007_052
authors	Hamza, N. and M. Horne
year	2007
title	Building Information Modelling: Empowering Energy Conscious Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 661-670
summary	The increasing awareness of climate change and carbon dioxide emissions from the built environment is resulting in the need to visualize the environmental performance of buildings. One of the recent drivers in the UK has been the tightening of building regulations relating to energy consumption in buildings, mandating all buildings to be performance evaluated by accredited environmental simulation tools to test their carbon dioxide emission against set targets. Currently there is major confusion on all levels from architects to building control officers and contractors on how to engrain energy consciousness principles in the design and construction of buildings. Within this context, ‘Building Information Modelling’ that is linked to ‘Building Performance Modelling’ is increasingly being looked upon as a tool to facilitate the communication between the design team and contractors and to provide a transparent information model on the specification and targeted energy consumption of all new/ refurbished buildings to all parties involved. In this paper, analysis of the benefits and drawbacks of current efforts to combine those two comprehensive databases will be investigated. A sample of main software development companies, architects and contractors, using semi-structured interviews is undertaken to find out how Building Integrated Modelling (BIM) and Building Performance Modelling (BPM) can support the design and construction teams to deliver energy conscious buildings.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	6c08
id	6c08
authors	Horne M, Thompson E, Podevyn M
year	2007
title	An overview of virtual city modelling: emerging organisational issues
source	CUPUM07 10th International Conference on Computers in Urban Planning and Urban Management, Iguassu Falls, Brazil, 11-13 July 2007
summary	This paper presents a recent overview of the increasing use of Virtual Reality (VR) technologies for the simulation of urban environments. It builds on previous research conducted on the identification of three-dimensional (3D) city models and offers an analysis of the development, utilization and construction of VR city models. Issues pertaining to advantages, barriers and ownership are identified. The paper describes a case study of the development of a VR model for the city of Newcastle upon Tyne in the UK and outlines the role that academic institutions can play in both the creation and utilization of urban models. The study offers a new approach for the creation, management and update of urban models and reflects on issues which are emerging. Areas for future research are discussed.
keywords	city models, Virtual Reality, management, diversity, ownership
series	other
type	normal paper
email
last changed	2008/03/14 00:13

_id	caadria2007_639
id	caadria2007_639
authors	Jinuntuya, Pinyo; Jirayod Theppipit
year	2007
title	Temporary Housing Design and Planning Software for Disaster Relief Decision Support System
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.k9q
summary	There is a continuous and urgent need for disaster relief in Thailand and countries suffering from floods and tsunami impact. Based on this issue, design and planning software for temporary housing project has been developed, as well as the process and guideline for implementation. This paper describes a unique coupling of interactive 3D virtual environment with parametric designing in order to manage disaster relief project more efficiently. Architects and planners can use the functionality of software on both design simulation and project evaluation aspects. We need to provide correct information to help people making decision when they are in disaster. So the disaster relief decision support system must offer proper information of crisis management focused on people, place, and process. One of the main features of software is the relationship modeling of essential factors such as number of people, houses, budget, time, and space. This automatic temporary houses generation and space planning is simulated for land use and layout plan design with cost estimation analysis. The system components were proposed to a new disaster relief system in alternative approach. Using community-based development will not cost budget but required people participation. Our software’s space coordination will start and centered from available space in school or temple with sufficient infrastructure. After essential factors are inputted, appropriated number of temporary houses, public facilities, and management guideline will be generated to support further planning decision. Our core system was developed on Java and Swing Technology, empowered by real-time 3D rendering CAD engine. In addition, “Virtools” as our Authoring Tools was applied to improve design interaction and explore rapid software prototyping. At the end, we discuss the comparison between real situations in Thailand and appropriate design standardization, which should be reconsidered how to manage crisis with the limitation of time and budget from government.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_289
id	caadria2007_289
authors	Sawasratanathon, Putthinun; Pinyo Jinuntuya
year	2007
title	Collaborative Cooling Load Analysis Software for Public Participation on Energy Conservation
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.o0s
summary	This article is part of a research on developing cooling load analysis software for energy conservation. This research focuses on developing the system of Collaborative Design and Public Participation System which allows property owners, architects, engineers as well as others outside the field, to contribute to design process based on the concept of energy conservation within the collaborative virtual environment. The combination of the two ideas between collaborative virtual environment and Analysis Engine of cooling load calculation changes the traditional working processes in which architects and engineers work separately. From the traditional process where both architects and engineer redevelop the whole project from the beginning when redesigning is in need, this new collaborative process requires less time and energy from both parties due to the simultaneous participation of architects, engineers as well as other contributors. In this research, Microsoft© Direct3D® - API based Virtools® is used to develop Real-Time Simulation and its internal script in the calculation process. Through the implementation process, the study aims to develop the 3 components of 1) urban area database illustrating simulating maps for users 2) Graphic User Interface (GUI) connected to other software modules for further expansion and 3) Virtual Network Environment allowing multiple users to log in and use the programme at the same period of time.
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	bsct_senses
id	bsct_senses
authors	Senses, Nilufer
year	2007
title	Foam Structures: A Comparative Structural Efficiency Analysis Based on the Building Case "Watercube"
source	Vienna University of Technology; Building Science & Technology
summary	Foam structure in macro-scale has arisen as a new type of large span building structure recently which is a product of cooperation of advanced structural design, radical architectural design approach, and computer and software technology, and efficiency of foam structure became an important question to answer which could help further structural improvements. This study analyses efficiency of large span foam structure relative to conventional large span building structures with a parametric simulation method. Space frames are a special case of conventional large span structures one compared with foam structures, because it satisfies criteria such as being lightweight and three-dimensional as foam structure. Analysis is based on the comparison of base cases of foam model and space frame model, which are developed on light of real projects the Water Cube and the Symbol Zone of Expo’70, based on the parameters structural depth, weight and displacement, and vertical and horizontal load cases. During the analysis structural behavior of base cases were simulated by using a special structural behavior simulation program. It was found that foam model is more efficient than space frame model in terms of structural depth which is an important issue for large span building structures from both architectural and engineering point of view. Capability of spanning large distance with significantly less structural depth makes foam structure a preferable, new generation, steel structure for large spans. Moreover, the development process of base case foam model demonstrated the critical importance of geometrical design concerns of foam structure. Structural behavior simulations were exposed that structural optimization is one of the vitally important process of structural design of the foam structure.
keywords	Foam structure, space frame, geometrical optimization, structural optimization, structural behavior simulation
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ecaade2007_222
id	ecaade2007_222
authors	Turkienicz, Benamy; Bellaver, Bábara; Grazziotin, Pablo
year	2007
title	CityZoom
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 375-382
doi	https://doi.org/10.52842/conf.ecaade.2007.375
summary	In the last twenty years, computer tools have progressively enabled the modeling of buildings and cities in lesser time and cost, along with an increase in the results quality. A city modeled according to planning regulations usually present a correlation between plots and buildings dimensions. The representation of such correlation for a large number of plots requires repetitive work, thus suggesting the use of a computational tool to perform the task. Existing CAD, GIS, and VR software can generate accurate representations of the reality, but have no capabilities to simulate the impact of alternative urban regulations for large number of plots in a short period of time. CityZoom is a Decision Support System for urban planning, with a specific built-in city model, where data is represented in an object-oriented model representing the urban structure. CityZoom not only provide CAD tools, but a shell where different performance models can operate iteratively. It can simulate given urban regulations applied to a set of urban plots, as well as address environmental comfort issues such as shadow casting between buildings. Results can be displayed as tables, graphs, and in a 3D preview of the whole city or part of it. It’s also possible to export them to commercial GIS tools, to perform different data analysis. The graphical outputs make for an easy understanding of the results by laymen, an important feature for participatory planning, while the display of the correspondent numerical data enable correlations with indicators and parameters of urban quality.
keywords	CityZoom, urban planning, building simulation
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ddss2008-01
id	ddss2008-01
authors	Viejo García, Pablo; Christian Keim
year	2008
title	Simulation model of heat and power demand in aGerman region until 2030Stuttgart Metropolitan Region as case study
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Energy demand is a major concern for the future of European Cities. Resource availability and costs, climate change, and their consequences are directly related with the energy consumption in our cities. In 2007 already more than half of the world population live in cities, and cities are the main consumers of energy. The model presented in this paper explores the possibility of estimate the demand of end energy (heat and power) by simulating with a cellular automaton land use changes in a German region, in this case, Stuttgart Metropolitan Region. Several approaches deal with problems due to data availability, non-spatial information sources, aggregation levels, quality and consistence of data, among others. This case study shows that a non-deterministic simulation model of energy demand related to urban growth is already feasible, with several constraints. Otherwise, the energy demand calculations differ in great manner depending on consumption sectors (residential, commercial, industrial, transport) and all these calculation models should be further improved. Software and hardware constraints have been as well identified, and stressed in the conclusions.
keywords	Complex systems, Self-organisation, Cellular automata, Geographical information systems, land-use change, end energy demand, energy planning systems
series	DDSS
last changed	2008/09/01 17:06

_id	bsct_ahmeti
id	bsct_ahmeti
authors	Ahmeti, Flamur
year	2007
title	Efficiency of Lightweight Structural Forms: The Case of Treelike Structures - A comparative Structural Analysis
source	Vienna University of Technology; Building Science & Technology
summary	This work addresses the structural efficiency of lightweight tree-like structures for three case studies: Stuttgart Airport, Beaverton Library, and Thermal Bad Oeyenhausen. The case studies are simulated using Build simulation software, to determine the stresses induced in each structure. The material efficiency and shapes areexplored in terms of load bearing structures. Hybrids of the above structures are formed to compare the pattern morphology used by various types of tree-like structure and assess the structural behavior. In addition, (steel, wood and concrete) materials are compared to determine which would have better structural performance. In order to show the resemblance between the growing trees and the tree-like structures, an example of both cases is simulated and stresses evaluated. Results show that, in general, the minimum stress and deformations are obtained for steel. Structures made out of this material also exhibit higher load bearing capability, optimum stability factors and the best geometric efficiency, inspite of higher specific weight (10 times wood, and 3 times concrete).
series	thesis:MSc
email
more	http://cec.tuwien.ac.at
last changed	2007/07/16 17:51

_id	ascaad2007_017
id	ascaad2007_017
authors	Alamgir, S.; A. Khan and K. Alamgir
year	2007
title	Computer Aided Environmental Solutions: Evaluation of Optimum Building Orientation in Lahore, Pakistan
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 213-214
summary	One of the primary features of solar passive design is the orientation of a building on a particular latitude. The client of Information Technology demands testing, validity, practicality and sustainability of a building project before execution. The computer based simulations are the only practical way to predict the complex energy performance and analysis for a large number of passive design solutions. This paper investigates the optimum residential building orientation having various zones, located in Lahore, Pakistan, with the help of Energy Simulation program. It is concluded that with the help of software, it is possible to orient the residential plan with the minimum solar gain of the required living zones.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2007_af73
id	sigradi2007_af73
authors	Bruscato, Underlea; Rodrigo Garcia Alvarado
year	2007
title	Spaces for Meetings and Memories in Virtual Networks [Espaços de Encontro e Memória nas Redes]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 380-384
summary	Digital media is becoming a huge space for information and communication, including heritage simulation. Meantime urban spaces are deteriorating and loosing social role. This paper shows development of heritage models like social spaces in internet to promote urban memory and meetings. A model of old square and theatre of the abandonee town of Sewell in Chile, diffused through youtube, and the model of Square of Inmigration in Sao Leopoldo, Brasil, available in virtual communities in internet with links to fotolog pages of families. These examples demonstrated relationship between technological possibilities and urban spaces that can support social cohesion.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2007_af107
id	sigradi2007_af107
authors	Espina, Jane; Francisco Rincón
year	2007
title	Simulation as an urban planification tool: Plaza Baralt [Simulación como herramienta de planificación urbana: Plaza Baralt]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 364-369
summary	Pedestrian simulation tools are usually used to evaluate pedestrians’ evacuation/security in buildings (closed environments). The paper’s objective is to develop a methodology for the application of these tools in urban planning (open spaces), where the pedestrian behavior is more complex. The area studied is Plaza Baralt, in Maracaibo Venezuela, an area enclosed by historic buildings. The proposed scenarios and pedestrian flow simulations – based in cellular automata – followed a locally adapted data recollection and site analysis. As a result the methodology allows the designer to analyze various scenarios, fast and efficiently, identifying problems of areas, flow, land use and user profiles.
keywords	Pedestrian flow simulation; land use; urban planning; scenery
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	sigradi2007_af80
id	sigradi2007_af80
authors	Lima, Denise; Juliana de Oliveira Taschetto; Felipe Etchegaray Heidrich
year	2007
title	Digital graphical study of simulation of the visual results of the application of regulating norms for the visual communication of commercial building [Estudo gráfico digital de simulação dos resultados visuais da aplicação de normas reguladoras para a comunicação visual de prédios comerciais]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 327-331
summary	Beyond importance of the visual communication in a consumption society and of the necessity of perfect integration of this with the urban landscape, in the Brazil, cities searched to create regulation norms with the objective to organize some types of external visual communication. This study it shows the digital visualization with application of specific norms through the digital graphical resources. The previous visualization is important to test the viability and to foresee the result in the urban landscape. With norms' application, the visual communication of the marks will be more appreciated and the buildings will have their architecture respected.
keywords	Digital graphical; Visual communication; Urban landscape; Regulating norms
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade2007_021
id	ecaade2007_021
authors	Mannan, Ashik Vaskor; Uddin, M. Saleh
year	2007
title	Natural Behavior and Computational Logic for Optimization of Architectural Design
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 493-498
doi	https://doi.org/10.52842/conf.ecaade.2007.493
summary	In recent years much avant-garde architectural work has been dominated by a process based theoretical paradigm, inspired largely by various thinkers, critics, and philosophers. This particular ‘process practice’ attempts to address the paradox at the heart of contemporary production, by looking dialectically at the relationship between structure and ornament in nature with brainstorming and use of computer simulation. The goal of this paper is to develop a computer optimized system that can generate solutions for defining spaces involving a number of contextual relationships of activities. In particular, this research undertakes a pilot study (working team: Ashik Vaskor Mannan, Masrur Mamun Mithun, Lau Hon Yee Damien) on pattern and behavior in nature and implements the findings in to an architectural problem. The Initial Research focuses on Theory of emergence, Analysis of swarm behavior, and Analysis of ant system. Specific urban sites with different behavior patterns are chosen in Barcelona where this process is implemented to examine how they response to this course of action. This Bottom up method provides an optimum solution instead of a top down solution for an architectural problem
keywords	Design optimization, computational logic, natural behavior
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2007_189
id	ecaade2007_189
authors	Mark, Earl
year	2007
title	Simulating Dynamic Forces in Design with Special Effects Tools
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 219-226
doi	https://doi.org/10.52842/conf.ecaade.2007.219
summary	Special effects technology can facilitate dynamic sketching in the early stage of a design project without needing time-consuming effort. This form of sketching was tested in a design studio taught by the author. The study of dynamic materials and oceanfront site conditions set the stage at the beginning of a design process for a more comprehensive analysis later on. On the one hand, the risk of using special effects tools is that the visual look can seem convincing, but the apparent result is based upon an overly simplified set of assumptions. On the other hand, the use of such technology can be very stimulating to the design imagination without requiring complex analysis that may bog down the free flow of ideas. Once a greater commitment is made to a particular design proposal, more complete physical analysis and modeling can be undertaken to help avoid the risk of false first impressions. In the studio, cloth simulation was used to develop the design of tension membrane structures (tents) that retracted and unfurled in a series of complex movements. Fluid dynamics effects were used in the design and development of related boat dock facilities. A wind-tunnel simulation tool was used to explore the performance of the tension-membrane fabrics under varied wind loads. The visualization techniques were complemented by ¼ to ½ scale assembled components created by rapid prototyping. The use of an actual wind-tunnel further tested the prototypes in some cases. On the whole, quickly implemented special effects were the starting point for reacting to and developing some initial design concepts and served as the basis for more complete physical modeling of prototypes later on. Using animation as a design method is well established in other work (Hirschberg 06). Animation is also a helpful way to work out the step by step assembly of complex architectural form (Mark 95). The special effects tools permit a larger range of initial design alternatives to be initially considered that are subsequently narrowed down by physically based prototypes that are more predictive of real world performance.
keywords	Cloth simulation, fluid dynamics effects, design sketching, special effects, tension membrane fabrics
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2008_137
id	ecaade2008_137
authors	Palmquist, Erik; Shaw, Jonathan
year	2008
title	Collaborative City Modeling
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 249-256
doi	https://doi.org/10.52842/conf.ecaade.2008.249
summary	This paper presents an approach to creating an online real time rendering environment, upon which a large-scale, urban 3D model can be produced as a collaborative effort between initial content creators and outside parties with an interest in simulation and visualization. In 2007, the City of Atlanta, Georgia organized a taskforce to provide recommendations on the future development and mobility along the city’s signature street, Peachtree Street. To aid in the visualization of this area, datasets were converted into low polygon textured 3D models for the entire study area. This content will serve as the foundation of a collaborative effort to complete a high quality real time environment. The process for this project will be described and the means to extend the boundaries, maintain, and collaborate with this content will be proposed.
keywords	3D model, collaborative design, real time, visualization, training
series	eCAADe
email
last changed	2022/06/07 07:58

_id	eaea2009_piga
id	eaea2009_piga
authors	Piga, Barbara E.A.
year	2011
title	The Urban Simulation and Projects Evaluation Laboratory at the Politecnico di Milano: An Educational and Research Facility
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 115-120
summary	At the beginning of 2007 an Italian Urban Simulation Laboratory was founded at the Politecnico di Milano. The laboratory, coordinated by prof. Fausto Curti, has been developed thanks to the one year presence of the visiting professor Peter Bosselmann, director of the Environmental Simulation Laboratory at the University of California at Berkeley. The laboratory has an interdisciplinary approach and a threefold mission: experiment, using the laboratory setting to study urban projects at different scales; communicate, aiding public communication by making urban projects understandable to everyone; integrate and innovate, working on different kind of simulations techniques in an integrated way. In its initial experience the laboratory is primarily a didactic and research facility. Students can join the work and participate actively to the research. Until now about 40 students have worked with us, more than a half were foreign students from all over the world. The majority of the students did an internship of about 150 (three-year degree) or 300 (master degree) hours and some of them have continued working after this period developing a thesis. At the moment the case study, used as a pilot research, is about the Porta Nuova project at the Garibaldi- Repubblica area in Milan. The 300.000 mq of the total area and its well served central position make this place strategic for Milan. In this area the adopted urban transformation plan is creating a new business center that affects redevelopment projects, new infrastructures, and a park. The overall project will overhanging the surroundings city center with some of the highest buildings of its skyline. The importance of the site and the dimension of the project make this case significant to test the use of simulation for supporting evaluations about morphological aspects, comfort conditions, visual impacts, and other aspects that directly influence the quality of the new urban spaces. We are now applying different simulation methodologies in order to better understand the peculiar usefulness of each kind as a tool to support evaluation. As any kind has its own limits we work with different typologies at the same time. We are working with 1:500 scale physical model of a 1 km square of the area and different kind of static and dynamic simulations. We developed, with an external office, a micro-car to move a micro-camera in the maquette. We use this equipment to better explain the project implications to the students by producing subjective shot videos or showing a walk in real-time. To reproduce in a better way some relevant walks through the transformed site we have also produced some videos made of a superimposition of the real existing context and the virtual projects. To do this we used a rendered video of the project superimposed to the filmed promenade of the today condition, previously recorded using steadycam. A lot of static simulations has been employed to better understand the new city configuration from some representative points of view, as for example the roof of the Duomo cathedral. We are now developing some other kinds of analysis such as shadows impact; this is done by using a 1:1000 scale maquette in the Heliodon, but also with some digital tools. In the next future a work with the wind tunnel will help to understand some other comfort implications of the project at the micro-urban scale. The multilayer approach is the main aim of the laboratory and is an important tool to clarify the multidimensional project impacts to the students. In this way the laboratory can be a learning tool, it can stimulate the project process and support decision-making while improving the knowledge about the correct use of simulations for evaluating the cumulative implications of the proposed urban processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	ascaad2007_011
id	ascaad2007_011
authors	Reichrath, M. and P. Zeile
year	2007
title	Illumination of urban space using digital simulation methods: Exemplified on the UNESCO World Heritage Site of Bamberg
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 127-140
summary	The photorealistic visualisation of lighting-scenarios with the help of virtual 3d city models is gaining importance as a tool, helping to make decisions in the process of planning. This form of presentation makes sense to every spectator very quickly and in a definite way, thus it makes collaboration easy especially in interdisciplinary planning teams. Moreover the light-planner has the possibility to check his design in a virtual surrounding and therefore gain additional reliability for his planning. The displayed, exemplary, workflow and the techniques belonging to it, allow to show situations during the course of planning and to present the current state of planning realistically. Hence the quality of planning can be enduringly improved, through experimental use of new materials and ideas. Moreover alternative planning that does not show the right results can be eliminated very early in planning process, with not need for special investments to do so.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ijac20075308
id	ijac20075308
authors	Ruiz-Tagle V, Javier
year	2007
title	Modeling and Simulating the City: Deciphering the Code of a Game of Strategy
source	International Journal of Architectural Computing vol. 5 - no. 3, pp. 571-586
summary	This research includes a new teaching proposal for architecture and geography, based on Systems Theory and Dynamics Systems, aimed at improving the understanding of the complex structure and dynamics of the city. SimCity, a game of strategy that allows us to design and to plan the city, is used as the software, with the aim of conducting didactic experiments, and integrating the complex relations that configure the city. The methodology incorporated theoretical and experimental stages, and concluded with a simulation exercise. The exercise had a very good reception, as a method for learning and research, creating a great aptitude for generating good research questions, by making many variables visible simultaneously. The research has developed, and participants have, subsequently, been exposed to the second version of the course, where new concepts are being integrated (emergence and cellular automata) to deepen the theoretical base, and to allow further analysis and experimentation with the game.
series	journal
last changed	2007/11/20 18:06

For more results click below: