Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 558

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2007_391
id	caadria2007_391
authors	Biloria, Nimish
year	2007
title	Adaptive Corporate Environments
doi	https://doi.org/10.52842/conf.caadria.2007.x.d7a
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	The research paper illustrates an attempt to envision computation aided architectural responsiveness (spatial and informational) towards contemporary forms of corporate organizations. Architectural substantiations for such corporate bodies embodying dynamic business eco-systems tend to be rather inert in essence and deem to remain closed systemic entities, adhering to a rather static spatial program in accordance with which they were initially conceptualized. Architectural renditions supporting such emergent forms of organizations hence need to be re-thought: a need to break apart from the inherent closed system typology of architectural materiality needs to be visualized. The research paper, addresses such issues by specifically focusing upon developing intelligent reconfigurable spaces (in accordance with customized activity oriented spatial preferences of its occupants) and an interactive user interface as a front end of the system (for inputting preferences and 3d space visualization purposes). A space cluster, completely user centric, equally dynamic, and flexible, as compared to the dynamic activities which the space sustains is thus developed. The papers content is explicitly based on the output of the authors PhD research work conducted at the TU Delft, Netherlands.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_069
id	caadria2007_069
authors	Chiu, Hao-Hsiu
year	2007
title	Telepinup System: Supporting Dynamic Remote Interaction in Design Reviews
doi	https://doi.org/10.52842/conf.caadria.2007.x.u1d
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper addresses a pilot study in proposing a series of interface design solutions as integrated parts of a virtual communication space prototype: Telepinup System, which intends to enhance dynamic and seamless experiences for distributed architectural design discussions through digital interaction. Aiming to support graphic-centered, nonlinear, and contextual way of visualverbal communication suitable for design discussion, the prototype tool is developed to demonstrate various interface solutions and to be evaluated within the actual use contexts in two user experiments for its efficiency and effectiveness of underlying design criteria and proposed solutions. Interaction patterns during the experiments are recorded in the database and immediately visualized at the end of each test for participants to give instant feedback and for later analysis. The initial result shows that the collaboration between some critical interface solutions helps seamlessly synchronize graphical, verbal and social information exchange.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2007_483
id	caadria2007_483
authors	Lai, Ih-Cheng; Teng-Wen Chang
year	2007
title	A Study in Linking Interactions for Supporting Idea Association
doi	https://doi.org/10.52842/conf.caadria.2007.x.c4b
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Idea association is an interactive behavior that will invoke different levels of linking interaction in the conceptual design stage. For understanding the mechanisms of the linking interaction, this research explores the phenomena of linking interactions within idea association during the conceptual design stage. Based on the mechanisms (representation, recall and communication) found from the phenomena, we integrate the mechanisms with the computational technologies (case-based reasoning and software agents). Finally, a preliminary computational mechanism of linking interaction for supporting idea association is proposed.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2007_447
id	cf2007_447
authors	Maher, Mary Lou; Kathryn Merrick and Rob Saunders
year	2007
title	From Passive to Proactive Design Elements
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 447-460
summary	Agent technology has been used as an organising mechanism for software systems that focus on modularity and autonomy. This paper presents two applications that explore the potential of combining agent technologies with physical building design elements to change the nature of the built environment from a passive space to one that proactively engages with its inhabitants. We focus on how these curious places sense the state of the environment and the activities of the humans in the environment and enhance the human experience, thus going beyond the concept of supporting human activities in traditional approaches to intelligent rooms.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	caadria2007_585
id	caadria2007_585
authors	Menegotto, José Luis
year	2007
title	The Nazca Lines and their Digital Architectural Representation
doi	https://doi.org/10.52842/conf.caadria.2007.x.r9m
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	This paper relates to a digital architectural design experience in 2005 for the Nazca Competition. Nazca is an archaeological site situated about 400 kilometers south of Lima, Peru. It is a large desert with gigantic millenary geoglyphs carved on the surface, which can only be seen clearly from above. The Nazca geoglyphs are made up of hundreds of lines, spirals and triangular plazas, as well as zoomorphic figures like birds, fish, spider, etc. The Nazca Competition asked for an observatory-lodge of approximately 1.000m2 with 20 rooms, communal bathrooms, supporting areas and an observatory tower of at least 100 meters. The observatory-lodge was designed using a digital representation technique called "Genetically Constructed Structures". The structure was created using the geometric principle of the affinity of two conic sections: circle and ellipse. The form was produced transforming the circle and the ellipse by performing basic geometric transformations (translation, rotation, reflection and scaling). According to this technique, the sequence of transformations was codified in the form of an alphanumerical string, metaphorically named the "DNA structure". The code was inserted as extended data into the entities which shaped the structure profiles. The algorithms were programmed with AutoLISP language. The "DNA code" allowed the structure to be constructed and deconstructed from any point, generating many different forms, to be studied and compared. One year later, the same 3D model was used to test another digital technology called "musical box" where their geometrical points are captured, read and translated into musical parameters, generating music. In this paper we will present the graphical form of the tower as well as the music associated.
series	CAADRIA
last changed	2022/06/07 07:50

_id	ecaade2007_063
id	ecaade2007_063
authors	Petzold, Frank; Bimber, Oliver; Tonn, Christian
year	2007
title	CAVE without CAVE
doi	https://doi.org/10.52842/conf.ecaade.2007.161
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 161-168
summary	Activities in the building industry in Germany concentrate increasingly on a combination of renovation and new-build. A look at current computer aided applications reveals a serious lack of IT support for the whole architectural design process in and within existing buildings (e.g. building surveying, designing on site and the preparation of information for further use in later planning stages). An ongoing interdisciplinary research project undertaken jointly by the faculty of media and the faculty of architecture is investigating methods and techniques for the computer-aided support of the design process in and within existing buildings. The goal is to develop a hardware and software concept for a “design-toolbox” based on SAR (spatial augmented reality) and to implement aspects of this as prototypes. This paper describes the goals of the “Spatial Augmented Reality for Architecture” project and discusses possible fields of application for SAR for supporting the design process in existing buildings from a user’s perspective. This paper presents the initial results of the project, the development of a cave-like hardware and software concept called “low-cost projection in room corners” and the description of the core concept based on a client-server architecture. The project is funded by the “German Research Foundation (DFG)”.
keywords	Augmented reality, virtual reality, design support, renovation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	eaea2009_piga
id	eaea2009_piga
authors	Piga, Barbara E.A.
year	2011
title	The Urban Simulation and Projects Evaluation Laboratory at the Politecnico di Milano: An Educational and Research Facility
source	Projecting Spaces [Proceedings of the 9th European Architectural Endoscopy Association Conference / ISBN 978-3-942411-31-8 ], pp. 115-120
summary	At the beginning of 2007 an Italian Urban Simulation Laboratory was founded at the Politecnico di Milano. The laboratory, coordinated by prof. Fausto Curti, has been developed thanks to the one year presence of the visiting professor Peter Bosselmann, director of the Environmental Simulation Laboratory at the University of California at Berkeley. The laboratory has an interdisciplinary approach and a threefold mission: experiment, using the laboratory setting to study urban projects at different scales; communicate, aiding public communication by making urban projects understandable to everyone; integrate and innovate, working on different kind of simulations techniques in an integrated way. In its initial experience the laboratory is primarily a didactic and research facility. Students can join the work and participate actively to the research. Until now about 40 students have worked with us, more than a half were foreign students from all over the world. The majority of the students did an internship of about 150 (three-year degree) or 300 (master degree) hours and some of them have continued working after this period developing a thesis. At the moment the case study, used as a pilot research, is about the Porta Nuova project at the Garibaldi- Repubblica area in Milan. The 300.000 mq of the total area and its well served central position make this place strategic for Milan. In this area the adopted urban transformation plan is creating a new business center that affects redevelopment projects, new infrastructures, and a park. The overall project will overhanging the surroundings city center with some of the highest buildings of its skyline. The importance of the site and the dimension of the project make this case significant to test the use of simulation for supporting evaluations about morphological aspects, comfort conditions, visual impacts, and other aspects that directly influence the quality of the new urban spaces. We are now applying different simulation methodologies in order to better understand the peculiar usefulness of each kind as a tool to support evaluation. As any kind has its own limits we work with different typologies at the same time. We are working with 1:500 scale physical model of a 1 km square of the area and different kind of static and dynamic simulations. We developed, with an external office, a micro-car to move a micro-camera in the maquette. We use this equipment to better explain the project implications to the students by producing subjective shot videos or showing a walk in real-time. To reproduce in a better way some relevant walks through the transformed site we have also produced some videos made of a superimposition of the real existing context and the virtual projects. To do this we used a rendered video of the project superimposed to the filmed promenade of the today condition, previously recorded using steadycam. A lot of static simulations has been employed to better understand the new city configuration from some representative points of view, as for example the roof of the Duomo cathedral. We are now developing some other kinds of analysis such as shadows impact; this is done by using a 1:1000 scale maquette in the Heliodon, but also with some digital tools. In the next future a work with the wind tunnel will help to understand some other comfort implications of the project at the micro-urban scale. The multilayer approach is the main aim of the laboratory and is an important tool to clarify the multidimensional project impacts to the students. In this way the laboratory can be a learning tool, it can stimulate the project process and support decision-making while improving the knowledge about the correct use of simulations for evaluating the cumulative implications of the proposed urban processes.
series	other
more	http://info.tuwien.ac.at/eaea
last changed	2011/03/04 08:45

_id	acadia07_230
id	acadia07_230
authors	Qian, Cheryl Z.; Chen, Victor Y.; Woodbury, Robert F.
year	2007
title	Participant Observation Can Discover Design Patterns in Parametric Modeling
doi	https://doi.org/10.52842/conf.acadia.2007.230
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 230-241
summary	Our research aims to understand the mid-level patterns of work that recur across designers and tasks. Our users comprise active architects and civil engineers. The hypothesis is that making such patterns explicit will result in improved expert work practices, in better learning material and suggestions for improvements in parametric design. The literature shows that patterns express design work at a tactical level, above simple editing and below overall conception. We conducted a user experience study based on Bentley’s GenerativeComponents, in which geometry can be related, transformed, generated, and manipulated parametrically within a user-defined framework. After interviewing the system’s chief, we ran a participant-observer study in the January 2007 SmartGeometry workshop. We engaged designers through the role of tutor and simultaneously observed and discussed their design process. We found clear evidence of designers using patterns in the process and discerned several previously unknown patterns. In February at another 10-day workshop, we found more evidence supporting prior findings. The paper demonstrates that participant observation can be an efficient method of collecting patterns about designers’ work and introduces such new patterns. We believe these patterns may help designers work at more creative levels and may suggest new ideas of interest to CAD application developers.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	b840
id	b840
authors	Schnabel, Marc Aurel; Wang, Xiangyu; Seichter, Hartmut; Kvan, Tom
year	2007
title	From virtuality to reality and back
source	INTERNATIONAL ASSOCIATION OF SOCIETIES OF DESIGN RESEARCH 2007 (IASDR07) ©School of Design, The Hong Kong Polytechnic University 2007 Core A, The Hong Kong Polytechnic University Hung Hom, Kowloon, Hong Kong Editor: Sharon Poggenpohl 12-15 November 2007 ISBN 988-99101-4-4 Digital Proceedings, Day 4, Session D: INTERACTION/INTERFACE
summary	There has been a growing research interest in investigating techniques to combine real and virtual spaces. A variety of “reality” concepts such as Virtual Reality and Augmented Reality and their supporting technologies have emerged in the field of design to adopt the task of replacing or merging our physical world with the virtual world. The different realities can be tailored to enhance comprehension for specific design activities along a design life-cycle. This paper presents state-of-the-art applications of these “reality” concepts in design and related areas, and proposes a classification of these realities to address suitability issues for the effective utilization of the concepts and technologies. Their potentials and implications in certain design activities are also discussed.
keywords	Mixed Reality, Augmented Reality, Virtual Reality, Augmented Virtuality, Mediated Reality, Amplified Reality, Virtualized Reality
series	other
type	normal paper
email
more	http://158.132.218.50:8000/
last changed	2007/11/15 20:58

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2007_039
id	ascaad2007_039
authors	Bakr, A.F.; I. Diab and D. Saadallah
year	2007
title	Detecting Inefficient Lighting Solutions: Step-by-Step Geographic information system (GIS) Technique
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 491-504
summary	Outdoor lighting is used to illuminate roadways, parking lots, yards, sidewalks, public meeting areas, signs, work sites, and buildings. It provides us with better visibility and a sense of security. When well designed and properly installed, outdoor lighting can be and is very useful in improving visibility and safety and a sense of security, while at the same time minimizing energy use and operating costs. But, because nobody thought at this, most street lights shine light not only on the nearby ground, where is needed, but also miles away and skywards. Thus a large fraction of the light is lost, at consumer expense and without his/her consent. In the other hand, shortage in street light may cause more crimes as well as accidents. Most of the wasted or short light comes from the poorly designed street lights. Billboards, decorative lights, poorly shielded security lights are part of the problem too, but the main culprit for the waste and ugly glow one sees above one's head at nights is from the streetlights. Thus, recent computer technology gives us tools to be employed for testing the quality of light. Geographic Information System (GIS) software could be utilized to achieve that mission through applying mapping technique. This technique could analyze digital photographs and define light polluted areas as well as bad lighted. This paper reveals that step by step technique, which employs hybrid technologies to solve such problem for better planning decisions.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ecaade2007_155
id	ecaade2007_155
authors	Bonwetsch, Tobias; Bärtschi, Ralph; Kobel, Daniel; Gramazio, Fabio; Kohler, Matthias
year	2007
title	Digitally Fabricating Tilted Holes
doi	https://doi.org/10.52842/conf.ecaade.2007.793
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 793-799
summary	Digital fabrication of building components by means of computer numerically controlled (CNC) machines is of high interest for architects and the building industry. Common design software does not allow for utilizing the potential that lies within these new technologies. To fully exploit the power of digital fabrication, new design paradigms have to be explored. In our design studios we implement direct scripting, the use of images to control parameters, as well as dynamical and rule based systems, which enables the designer to exploit the possibilities of digital fabrication. This paper provides an overview of the tools we developed. We will present some of the results from these classes and discuss its implications for future tool sets. It is essential to apply the knowledge of production methods at the starting point of the design process, in order to fully benefit from these new technologies. We believe that novel design strategies emerge out of this shift in production. Our goal is to integrate the principles of digital fabrication into the design process, resulting in a more valuable and sustainable architecture.
keywords	Digital fabrication, CNC, design tools
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2007_203
id	caadria2007_203
authors	Heidrich, Felix; Peter Russell and Thomas Stachelhaus
year	2007
title	Intervision3D: Online 3D Visualisation and Conferencing
doi	https://doi.org/10.52842/conf.caadria.2007.x.l3p
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	The use of Internet communication technologies in distributed teams has been carried out for well over 10 years. In this time, various methods to communicate and transfer information have been developed. A large amount of effort has been placed on enabling normal conversation to take place and it could be said, that with technologies like Skype, this is established. This enables planning partners to discuss, but we still need to convey what they are discussing. In short, the contents are still lacking. Technologies exist to allow users to share files or images, however this does not nearly reach the intensity or quality of discussions when partners are sitting together in front of a drawing or model. At best, screen sharing allows participants to see the same image but with low resolution and bad system response. The goal of the Intervision3D project is to allow distributed team members to discuss design issues with a common 3D model where participants can manipulate the model together in real time. In contrast to screen-sharing solutions, the Intervision3D project uses a server, which delivers a copy of the model to each conference participant. The server then coordinates the perspective views of all conference participants. One of the participants (usually the first) is initially designated as the speaker and he or she controls the views of the model through an intuitive walk/fly-through interface. The speed of the system is also buttressed by the simplicity of the application: as a Java applet, it is possible to start the Intervision3D system in any browser or as a separate applet on any system. As such, none of the participants need to install anything. The resolution of the model is optimized for each participant's browser and computer display. Currently, Intervision3D can import .3ds files and then render them using the JOGL Engine (Java Bindings for Open GL). JOGL allows the full Open GL suite to be used in rendering the model including lighting and textures: even normal PCs can do this quite well. The first implementation of the system is within an existing internet-based Design Studio and the paper elucidates how the first uses of the system have (partially) helped to increase the exchange of design ideas over the Internet. Through the Intervison3D system, the participants who have been separated by distance can once again discuss the same 3D model.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_159
id	ecaade2007_159
authors	Heidrich, Felix; Russell, Peter; Stachelhaus, Thomas
year	2007
title	Intervision3D: Online 3D Visualisation and Conferencing
doi	https://doi.org/10.52842/conf.ecaade.2007.757
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 757-764
summary	The use of Internet communication technologies in distributed teams has been carried out for well over 10 years. In this time, various methods to communicate and transfer information have been developed. A large amount of effort has been placed on enabling normal conversation to take place and it could be said, that with technologies like Skype, this is established. This enables planning partners to discuss, but we still need to convey what they are discussing. In short, the contents are still lacking. Technologies exist to allow users to share files or images, however this does not nearly reach the intensity or quality of discussions when partners are sitting together in front of a drawing or model. At best, screen sharing allows participants to see the same image but with low resolution and bad system response. The goal of the project is to allow distributed team members to discuss design issues with a common 3D model where participants can manipulate the model together in real time.. The speed of the system is also buttressed by the simplicity of the application: as a Java applet, it is possible to start the Intervision3D system in any browser or as a separate applet on any system. Files can be imported and then rendered using the JOGL Engine (Java Bindings for Open GL). JOGL allows the full Open GL suite to be used in rendering the model including lighting and textures: even normal PCs can do this quite well. The first implementation of the system is within an existing internet-based Design Studio and the paper elucidates how the first uses of the system have (partially) helped to increase the exchange of design ideas over the Internet.
keywords	Virtual design studio, shared models, CSCW
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2007_004
id	ecaade2007_004
authors	Hofer, Michael; Asperl, Andreas
year	2007
title	Geometry in the CAAD Curriculum
doi	https://doi.org/10.52842/conf.ecaade.2007.385
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 385-392
summary	Modern architecture takes advantage of the greatly increasing design possibilities. Yet, architects are not just a new group of CAD users. Scale and construction technologies pose new challenges to engineering and design. We are convinced that those can be met more effectively with a solid understanding of geometry. Thus, an academic CAAD curriculum has to meet these requirements. We introduce our approach taken at TU Vienna and focus on the first-term mandatory course on geometry for architecture.
keywords	Geometry, CAAD curriculum, geometric design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2007_030
id	ascaad2007_030
authors	Hoog, J.;C. Falkner and P. Seifried
year	2007
title	Collaborative spaces as learning environments: How Schools of Architecture may find their Way into the Virtual World
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 357-364
summary	3D virtual environments provided by current information and communication technologies offer new opportunities for architecture, potentially opening a completely new domain for architectural practice. Within this paper we describe scenarios for the use of 3D virtual environments at schools of architecture based on experiences from an EC-funded research project for the establishment of 3D - virtual campus for VIPA (Virtual campus for virtual space design Provided for European Architects). The campus was conceived as an extension of the existing learning management system used at TU-Vienna, Moodle. Within VIPA three virtual environments were tested as collaborative labs, for teaching architecture, and as digital environmental design tools: Open Croquet, Blender and Second Life.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
doi	https://doi.org/10.52842/conf.acadia.2007.040
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_053
id	ascaad2007_053
authors	Islami, S.Y.
year	2007
title	Surface-driven architecture: Moving Beyond the Ornament/Structure Opposition
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 671-682
summary	Contemporary architecture has been influenced by a shift of interest from the dialectic Derridean theories of language to those of Deleuze and Guattari who put more emphasis on transitions, experimentation and material presence. New digital design tools as well as new construction materials have opened up more possibilities for architects. E-paper, digital screens, printed concrete, composite polymers and dynamic cladding systems, have allowed designers to relish architecture at the surface level. Moreover, the process of architectural design is shifting from the desktop to the virtual world of the computer. NURBS, Blobs, Metaforms, Isomorphic Surfaces and other complex geometries are now possible using surface-driven computer modelling software. Because of this, the resultant architecture display a much more distinct appreciation and mastery of surface-effects. The following article argues that contemporary architecture is becoming increasingly a process of surfacing, both as a process of revealing and as a process of concealing. Surface, in common parlance, is generally understood as the exterior boundary of things, the outer skin of any object. In this sense, surfaces are actual, material, textural entities that we often encounter first. The surface is also taken to be something that conceals: “it was not what it appeared to be on the surface.” However, it is when things surface that they become evident or apparent; they appear out of a previously concealed existence or latency. Thus, surfacing is a process of becoming explicit, of becoming experientially apparent in a movement from virtuality to actuality. This article argues that the use of emerging computer technologies in architecture, have resulted in a renewed prioritization of surface and surface-effects. It shall be concluded that the surface-driven nature of most contemporary modelling software has resulted in a new approach to architectural design, one that has the potential of subverting the traditional hierarchy between ornament and structure. As a result, this design strategy has allowed for a much more spirited and creative approach to architecture.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ijac20075109
id	ijac20075109
authors	Jachna, Timothy J.; Santo, Y.; Schadewitz, N.
year	2007
title	Deep Space
source	International Journal of Architectural Computing vol. 5 - no. 1, pp. 146-160
summary	The work described here explores the problem of how digital technologies can enrich the experience of spatiality and social interaction in space(s). An existing café space at the School of Design of the Hong Kong Polytechnic University is linked to a "twin" in the form of an online-accessible environment. Sensors and displays establish channels of communication between the virtual and the physical space, enabling on-site visitors to the café and online visitors to the website to share a spatial experience. The article explains the design of modes of communication between the spaces, outlining the theory and genesis of the project and discussing issues and principles in the design and realization of such spaces, including the interplay between the three-dimensionality of the physical space and the two-dimensional picture-plane-based monitor interface through which the website is experienced, as well as strategies for the transmission of spatial experience within the constraints of commonly-available hardware and software.
series	journal
email
last changed	2007/06/14 12:11

For more results click below: