CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

_id ecaade2007_076
id ecaade2007_076
authors Coates, Paul S.; Derix, Cristian
year 2007
title Parsimonious Models of Urban Space
source Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 335-342
doi https://doi.org/10.52842/conf.ecaade.2007.335
summary This paper sets out an approach to urban modelling derived from early work with cellular automata and agglomeration models. In these cases the models are an example of distributed representation, where the rules built in to the model are replicated in all the discrete components of the model be they cells or agents. This is the classic AI. / AL paradigm of emergent systems. The paper describes the main structure of the models, and presents examples of the use of this modelling process in design education, pointing out the way dynamic models allow mapping on to interesting speculations about the dynamic of the city, and its social systems. The paper ends with a report on the use of such models as a design decision support system and how they will be used in planned work in master planning in the London Thames gateway area under the UK govt. sustainable communities initiative.
keywords Urban modeling, space syntax, agent based modeling, cellular automata
series eCAADe
email
last changed 2022/06/07 07:56

_id acadia07_025
id acadia07_025
authors Ascott, Roy
year 2007
title Architecture and the Culture of Contingency
source Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 25-31
doi https://doi.org/10.52842/conf.acadia.2007.025
summary A culture is a set of behaviours, attitudes and values that are shared, sustained and transformed by an identifi able community. Currently, we are bound up in a culture of consumerism, and of terror; there are also retro cultures and utopian cultures. What’s happening now that’s interesting is that many, if not all of these diff erent tendencies, tastes and persuasions are being re-aligned, interconnected and hybridised by a vast global community of online users, who are transdisciplinary in their approach to knowledge and experience, instinctively interactive with systems and situations, playful, transgressive and enormously curious. This living culture makes it up as it goes along. No longer do the institu- tions of state, church or science call the tune. Nor can any architectural schema contain it. This is a culture of inclusion and of self-creation. Culture no longer defi nes us with its rules of aesthetics, style, etiquette, normalcy or privilege. We defi ne it; we of the global community that maps out the world not with territorial boundaries, or built environments, but with open-ended networks. This is a bottom-up culture—non-linear, bifurcating, immersive, and profoundly human. Who needs archi- tecture? Any structural interface will do. Ours can be described as a contingent culture. It’s about chance and change, in the world, in the environment, in oneself. It’s a contingent world we live in, unpredictable, unreliable, uncertain and indeterministic. Culture fi ghts back, fi ghts like with like. The Contingent Culture takes on the contingency of life with its own strategies of risk, chance, and play. It is essentially syncretic. People re-invent themselves, create new relationships, new orders of time and space. Along the way, they create, as well as accommodate, the future. This culture is completely open-ended, evolving and transforming at a fast rate—just as we are, at this stage of our evolution, and just as we want it to be. Human nature, unconstrained, is essentially syncretic too.
series ACADIA
last changed 2022/06/07 07:54

_id ijac20075402
id ijac20075402
authors Burry, Jane R.
year 2007
title Mindful Spaces: Computational Geometry and the Conceptual Spaces in which Designers Operate
source International Journal of Architectural Computing vol. 5 - no. 4, pp. 611-624
summary Combinatorial computational geometry, while dealing with geometric objects as discrete entities, provides the means both to analyse and to construct relationships between these objects and relate them to other non-geometrical entities. This paper explores some ways in which this may be used in design through a review of six, one-semester-long design explorations by undergraduate and postgraduate students in the Flexible Modeling for Design and Prototyping course between 2004 and 2007. The course focuses on using computational geometry firstly to construct topologically defined design models based on graphs of relationships between objects (parametric design,) and concurrently to output physical prototypes from these "flexible models"(an application of numerical computational geometry). It supports students to make early design explorations. Many have built flexible models to explore design iterations for a static spatial outcome. Some have built models of real time responsive dynamic systems. In this educational context, computational geometry has enabled a range of design iterations that would have been challenging to uncover through physical analogue means alone. It has, perhaps more significantly, extended the students' own concept of the space in which they design.
series journal
email
last changed 2008/02/25 20:30

_id cf2011_p027
id cf2011_p027
authors Herssens, Jasmien; Heylighen Ann
year 2011
title A Framework of Haptic Design Parameters for Architects: Sensory Paradox Between Content and Representation
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 685-700.
summary Architects—like other designers—tend to think, know and work in a visual way. In design research, this way of knowing and working is highly valued as paramount to design expertise (Cross 1982, 2006). In case of architecture, however, it is not only a particular strength, but may as well be regarded as a serious weakness. The absence of non-visual features in traditional architectural spatial representations indicates how these are disregarded as important elements in conceiving space (Dischinger 2006). This bias towards vision, and the suppression of other senses—in the way architecture is conceived, taught and critiqued—results in a disappearance of sensory qualities (Pallasmaa 2005). Nevertheless, if architects design with more attention to non visual senses, they are able to contribute to more inclusive environments. Indeed if an environment offers a range of sensory triggers, people with different sensory capacities are able to navigate and enjoy it. Rather than implementing as many sensory triggers as possible, the intention is to make buildings and spaces accessible and enjoyable for more people, in line with the objective of inclusive design (Clarkson et al. 2007), also called Design for All or Universal Design (Ostroff 2001). Within this overall objective, the aim of our study is to develop haptic design parameters that support architects during design in paying more attention to the role of haptics, i.e. the sense of touch, in the built environment by informing them about the haptic implications of their design decisions. In the context of our study, haptic design parameters are defined as variables that can be decided upon by designers throughout the design process, and the value of which determines the haptic characteristics of the resulting design. These characteristics are based on the expertise of people who are congenitally blind, as they are more attentive to non visual information, and of professional caregivers working with them. The parameters do not intend to be prescriptive, nor to impose a particular method. Instead they seek to facilitate a more inclusive design attitude by informing designers and helping them to think differently. As the insights from the empirical studies with people born blind and caregivers have been reported elsewhere (Authors 2010), this paper starts by outlining the haptic design parameters resulting from them. Following the classification of haptics into active, dynamic and passive touch, the built environment unfolds into surfaces that can act as “movement”, “guiding” and/or “rest” plane. Furthermore design techniques are suggested to check the haptic qualities during the design process. Subsequently, the paper reports on a focus group interview/workshop with professional architects to assess the usability of the haptic design parameters for design practice. The architects were then asked to try out the parameters in the context of a concrete design project. The reactions suggest that the participating architects immediately picked up the underlying idea of the parameters, and recognized their relevance in relation to the design project at stake, but that their representation confronts us with a sensory paradox: although the parameters question the impact of the visual in architectural design, they are meant to be used by designers, who are used to think, know and work in a visual way.
keywords blindness, design parameters, haptics, inclusive design, vision
series CAAD Futures
email
last changed 2012/02/11 19:21

_id ascaad2007_040
id ascaad2007_040
authors Loemker, T.M.
year 2007
title Location Based Services in Revitalization: The Use of Commonly Available Techniques for a Client-Participation Model
source Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 505-516
summary This research concentrates on the combination of remote sensing devices, georeferenced data, web-based optimization techniques and Location Based Services in revitalization. Its aim is to enhance the delivery of information about the development potentialities of existing buildings. The present and idle stock of buildings is extensive. Nonetheless, significant data and information about existing buildings is hardly available. The real estate owners are usually not known by prospective clients and they can be elicited only with substantial effort. But even if data about a building is available it is difficult to valuate it precisely, because of missing standard classification techniques. The question whether or not a building is suitable for a certain subsequent use is therefore hard to answer. It involves an extensive expenditure of time and manpower. Recent publications however, demonstrate that requests for the re-use of buildings can be solved through the use of combinatorial optimization techniques (Loemker 2006a, 2006b, 2007). Within these approaches researchers mainly concentrate on the architect dealing with inquiries from clients. These inquiries typically address the question if specific buildings are suitable for particular future uses. With the aid of optimization engines the architect can solve these requests through a description of the existing buildings and the corresponding enquiries in terms of specific criteria such as number and size of rooms or adjacency between rooms. According to an unambiguous syntax these approaches can be applied to any building type. The building data is stored in databases which can be inquired through optimization engines which thereupon calculate suitable solutions to the demands made by the client. But even if these approaches demonstrate high potential, their bottleneck lies in the exclusive use through the architect. Neither can they be addressed to buildings that are not listed in the architects own inventory listings nor can they be used by the clients themselves. Furthermore, no reliable statement about a prospective reuse of a building can be made directly on site by prospective clients, i.e. buyers or renters. In our research we examined if ad-hoc analyses of existing buildings can be accomplished through the clients themselves with the aid of Location Based Services that can be accessed by common remote sensing devices. The aim is to give prospective clients the possibility to visit a building and run in-situ usability simulations. To accomplish this, building data will be transferred between the building and the client through the use of ordinary communication devices. These devices automatically connect to server-based applications, which compare the requirements of the client with the existing building and run remote simulations on concrete further utilization. The newly generated information will then be passed back to the client’s device. In the paper we address a scenario of a prospective client who visits a city where he hits on an unused building he might be interest in. The client wishes to gain immediate and accurate information if the building is able to meet his demands regarding the space needed for his company. Different techniques investigated, their assets and drawbacks will be described that could accomplish suchlike tasks.
series ASCAAD
last changed 2008/01/21 22:00

_id cf2007_447
id cf2007_447
authors Maher, Mary Lou; Kathryn Merrick and Rob Saunders
year 2007
title From Passive to Proactive Design Elements
source Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 447-460
summary Agent technology has been used as an organising mechanism for software systems that focus on modularity and autonomy. This paper presents two applications that explore the potential of combining agent technologies with physical building design elements to change the nature of the built environment from a passive space to one that proactively engages with its inhabitants. We focus on how these curious places sense the state of the environment and the activities of the humans in the environment and enhance the human experience, thus going beyond the concept of supporting human activities in traditional approaches to intelligent rooms.
series CAAD Futures
email
last changed 2007/07/06 12:47

_id caadria2007_633
id caadria2007_633
authors Maravelea, Kalliopi; M. Grant
year 2007
title The Creation of Urban Form: A Normative Approach to Modelling
source CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi https://doi.org/10.52842/conf.caadria.2007.x.t8k
summary The aim of this research project is to develop a methodological process that allows the designer to assemble and create various scenarios representing an urban environment through the utilization of economical computer based methods. During the last decade different techniques have been developed to address the needs of visualisation of urban areas many being based on photographic and photogrammetric systems. The demand for 3-D urban models continues to grow and although new technologies have undoubtedly reduced the time needed for the construction of a 3D model, there are still some remaining problems related to data quality and the level of the dimensional accuracy. On the basis that these problems are primarily related to software and hardware constraints and in conjunction with the fact that the richness and complexity of an urban space is difficult to represent in a 3D context, there is a growing interest in the modelling of the urban fabric which is not dependant on heavily capitalised technology for its data. The core principle of the current research project is summarised in the process of deploying a mechanism, which will allow the visualisation of urban form without loosing its quality and architectural characterisation. This technique suggests that a selection of various building types can be collected and described by their architectural elements, textures, scale and dimensions. From each group of buildings a library of fragmented architectural components can be then derived. The accomplishment of this methodology is the formulation of a 'grammar' comprised of a characteristic ‘syntax’ and its associated ‘vocabulary’. Therefore the expected outcome of this research is an approach that would allow the designer to create easily and quickly not only any desired building but additionally any imaginary cityscape.
series CAADRIA
last changed 2022/06/07 07:50

_id caadria2007_309
id caadria2007_309
authors Schoch, Odilo
year 2007
title The Categorisation of Data from Smart Buildings for a positive Sustainable Application
source CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi https://doi.org/10.52842/conf.caadria.2007.x.h3i
summary This paper describes an architecture oriented approach of a categorization of information in so called computer integrated buildings (CIB). It follows an approach which seeks for the suitability of information categorization in order to achieve an energetically sustainable operation of CIBs. The CIB and its environment may exist as physical objects or as a simulation. The underlying question of this paper is: how can data of high temporal and spatial density be made accessible within a CIB with the goal of quickly delivering the most suitable answers for a specifical application. The subtitle „Google™ in the House“ was chosen due to the achievable relation of a model with simple user interfaces, extendable pre-valuable data basis and high quality answers is being developed. The model’s foundation is the potential of any built context that it is very easy to position data in physical space by adding its position by Cartesian coordinates. This architectural way of pre-sorting data is defined as logical arranging. Further on, known mechanisms of information retrieving and mapping are added to the model. A preliminarily summary concludes that energetically sustainable operations are backed through means of computational categorization models.
series CAADRIA
email
last changed 2022/06/07 07:50

_id sigradi2008_180
id sigradi2008_180
authors Vincent, Charles
year 2008
title Gulliver in the land of Generative Design
source SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords Educational paradigm; Design teaching; Design methods;
series SIGRADI
email
last changed 2016/03/10 10:02

_id ascaad2007_034b
id ascaad2007_034b
authors Ambrose, M.A.
year 2007
title Body|Form|Space: Geometric translations of the body in motion
source Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 431-438
summary This paper presents a novel approach to digital investigation of body, space, form and motion to expose issues of spatial perception. The spatial experience as generated from, and translated by, the human body is the focus of this work. The work explores the representational value of the body’s sense-image, the context and spatial/visual literacy of the learned sense of space-time generated from the study of the human body. Here the body is conceived not just in space but also in time, affording the ability to reinterpret the body and it’s dynamic motion engaged not as a static condition, but as a set of event spaces. Motion here is defined as a multiplicity of continuities that can be subdivided by artificial boundaries that describe space, time and body. The study of a series of bodies and movements is described that explore the human condition as a series of differential lines (form + time) and framed structures (bodies + motion). The intention is to examine the relationship between human form and metaphysical simultaneity as generators of architectural form. The work is structured by a research approach that dissects and isolates the representational concept/image from the body in a way that might offer an alternative description to the traditional historic models.
series ASCAAD
email
last changed 2008/01/21 22:00

_id acadia07_120
id acadia07_120
authors Balakrishnan, Bimal; Muramoto, Katsuhiko; Kalisperis, Loukas N.
year 2007
title Spatial Presence: An Explication From an Architectural Point of View
source Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 120-129
doi https://doi.org/10.52842/conf.acadia.2007.120
summary This paper provides the theoretical foundation for understanding the concept of spatial presence. This is important for improving architectural visualization tools so as to capture the experiential aspects of space. The paper is organized into three sections. The first section explicates the concept of spatial presence by identifying various conceptualizations of spatial presence in the literature and performing a meaning analysis. It then proceeds to examine mechanisms underlying the formation of spatial presence. The paper concludes by offering initial guidelines for improving the nature of digital tools to enhance the feeling of spatial presence.
series ACADIA
email
last changed 2022/06/07 07:54

_id caadria2007_391
id caadria2007_391
authors Biloria, Nimish
year 2007
title Adaptive Corporate Environments
source CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi https://doi.org/10.52842/conf.caadria.2007.x.d7a
summary The research paper illustrates an attempt to envision computation aided architectural responsiveness (spatial and informational) towards contemporary forms of corporate organizations. Architectural substantiations for such corporate bodies embodying dynamic business eco-systems tend to be rather inert in essence and deem to remain closed systemic entities, adhering to a rather static spatial program in accordance with which they were initially conceptualized. Architectural renditions supporting such emergent forms of organizations hence need to be re-thought: a need to break apart from the inherent closed system typology of architectural materiality needs to be visualized. The research paper, addresses such issues by specifically focusing upon developing intelligent reconfigurable spaces (in accordance with customized activity oriented spatial preferences of its occupants) and an interactive user interface as a front end of the system (for inputting preferences and 3d space visualization purposes). A space cluster, completely user centric, equally dynamic, and flexible, as compared to the dynamic activities which the space sustains is thus developed. The papers content is explicitly based on the output of the authors PhD research work conducted at the TU Delft, Netherlands.
series CAADRIA
email
last changed 2022/06/07 07:50

_id ecaade2007_215
id ecaade2007_215
authors Boytscheff, Constantin; Sfeir, Marilu Kanacri
year 2007
title Experimental Results in Immersive Virtual Reality (IVR): Searching Critical Design Factors within IVR to Increase Architectural Space Qualities
source Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 91-98
doi https://doi.org/10.52842/conf.ecaade.2007.091
summary The actual study in IVR (Immersive Virtual Reality) proposes a path which may provide meaningful information about the user’s behaviours and difficulties to articulate in immersive worlds. Beyond it, we are searching for parameters to improve design qualities in such an architectural space. Our interest is to use IVR as a medium to research the quality of spaces in particular the atmosphere of such spaces, on the basis of people’s interest and eagerness. Therefore it is important to comprehend the special conditions of the perception and the behaviour of the user in virtual spaces. The purpose is to understand the influence of an IVR environment upon the human being and to develop motivation for a personal use of virtual space as a learning environment. The aim of the analysis was to explore behaviour patterns in a simulated IVR environment. Moving from the dynamic of space, there arises a personal “space-time-system”.
keywords Urban planning, virtual reality, immersive, teaching
series eCAADe
email
last changed 2022/06/07 07:54

_id caadria2007_451
id caadria2007_451
authors Chan, Chiu-Shui
year 2007
title Evaluating the Cognition in a Work Space Virtually
source CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi https://doi.org/10.52842/conf.caadria.2007.x.v8d
summary In any built environment, there exist certain subtle stimuli that affect the occupants’ cognitive processes and performance. This research intends to identify: (1) what environmental stimuli an office building would generate that could affect the habitants’ cognitive ability, and (2) how the habitants react to these stimuli. The goals of the study are to develop a new method for using immersive virtual reality to represent a built environment for simulating environmental impact, and to discover factors that could influence habitants’ cognitive performance in a space. It is expected that the discoveries could advance the application of virtual reality to study human cognition in architecture.
series CAADRIA
email
last changed 2022/06/07 07:50

_id caadria2007_657
id caadria2007_657
authors Chotsiri, Sirin; Siwarak Suwannasan, Wipaporn Lamool and Monchai Bunyavipakul
year 2007
title The Development of E-Groupware in the Collaborative Work of Architectural Design
source CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi https://doi.org/10.52842/conf.caadria.2007.x.u1h
summary The emergence of the computer networking, especially the internet has been a very useful tool for the construction industry. The AEC (AEC: Architectural, Engineering and Construction) has adopted the computer technology to the collaboration design work (CSCW: Computer Support Collaborative Work). It used to be that people work together in the real physical space like an office or design studio but now in the virtual design place. This is to accommodate the work that is being done among the designers or construction teams that are far apart. Through Web Application these people can work together from different location.
series CAADRIA
last changed 2022/06/07 07:50

_id caadria2007_433
id caadria2007_433
authors Dounas, Theodore; Kotsiopoulos M. Anastasios
year 2007
title Generative Systems Based on Animation Tools: Structure and Form of Core Ideas in Architectural Design
source CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi https://doi.org/10.52842/conf.caadria.2007.x.k1h
summary The goal of the research described in this paper is the formulation of a generative system for architectural design, where a structured core architectural idea is the input and alternatives to that idea are the output. Specifically we present a production pipeline of architectural / spatial configurations using the context of animation and time based design tools. Our model consists of “time” and space design constraints of boundaries / objects affecting a given architectural design, thus producing an alternative solution for every timeframe of the animation cycle. Initially the designer shapes an idea using animation software tools, where each tool is actually a constraint or a grammar rule defined informally by the user/designer. The influence of the tools can vary according to time, speed, location, configuration of the object and/or the constraint itself. In some of these animations the designer has the ability to sidestep partially the issue of emergence by providing specific key - frames for the solution to follow. The use of animation tools [shape driven curves, speed and time-line functions, parent child relationships] in the shape generation of our model empowers the user/designer to configure whole sets of shapes and designs interactively and without the need to define every solution independently. Simultaneously, a different, time-focused view of our model describes its use on designs that develop different configurations over time. Thus a duality of our model is established : the animated schema may be either a sum or a family of various designs or the animated time-line may represent a single design which changes over time. Finally the possibility of a structured graph representing each solution is discussed, where the designer can evaluate the merit of an individual solution in terms of conforming to the initial core idea or where alternative spatial configurations evolve in a different structure from the original design.
series CAADRIA
email
last changed 2022/06/07 07:50

_id c2f9
id c2f9
authors Friedrich E, Derix C and Hannah S
year 2007
title Emergent Form from Structural Optimisation of the Voronoi Polyhedra Structure
source Proceedings of the Generative Arts conference, Milan, 2007
summary In the course of the exploration of computational means in the architectural design process, in order to investigate more complex, adaptive geometries, the Voronoi diagram has recently gained some attention, being a three-dimensional space-filling structure which is modular but not repetitive. The project looks at the Voronoi diagram as a load-bearing structure, and whether it can be useful for structural optimisation. Hereby the edges of the Voronoi polyhedra are regarded as structural members of a statical system, which then is assessed by structural analysis software. Results seem to indicate that the Voronoi approach produces a very specific structural as well as spatial type of order. Through the dislocation of the Voronoi cells, the statical structure becomes more complex through emergent topology changes, and the initially simple spatial system becomes much more complex thorough emerging adjacencies and interconnections between spaces. The characteristics of the emerging form, however, lie rather in the complexity how shifted spaces and parts are fitted together, than in a radical overall emergent geometry. Spatially as well as a structurally, the form moves from a simple modular repetitive system towards a more complex adaptive one, with interconnected parts which cannot stand alone but rather form an organic whole.
keywords complex geometry, emergence, adaptive topology, voronoi diagram
series other
type normal paper
email
more http://www.generativeart.com/
last changed 2012/09/20 18:25

_id ddss2008-02
id ddss2008-02
authors Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year 2008
title Road hierarchy and speed limits in Brasília/Brazil
source H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords Space syntax, road hierarchy
series DDSS
last changed 2008/09/01 17:06

_id sigradi2012_167
id sigradi2012_167
authors Gutiérrez, Nicolás Sáez
year 2012
title Ejercicio de arte fotográfico. Reconstrucción de una vivencia espacial a través de una percepción inmersiva de la imagen (Fotografía) - escena (Arquitectura) [A photographic art exercise. Reconstruction of a spatial experience through an immersive perception of image (photography) - scene (architecture)]
source SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 373-377
summary This work constitutes one of the main lines of visual exploration derived from the photographic work done by the author. As an architect that makes and investigates photography, his exercises of art study the translations from visual perception of architectonic space to its photographic simulation, work that so far has only been done and exhibited in large format. The work here presented is based on projects undertaken from 2007 to 2010 and mainly elaborates on a recent project to be soon exhibited in Concepción between January and March 2013.
keywords Fotografía de autor; percepción visual; inmersión virtual; espacio de exhibición; realidad aumentada
series SIGRADI
email
last changed 2016/03/10 09:53

_id ecaade2007_091
id ecaade2007_091
authors Haeusler, Matthias Hank
year 2007
title Spatial Dynamic Media Systems
source Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 69-75
doi https://doi.org/10.52842/conf.ecaade.2007.069
summary The core project of this paper is the development of a system that allows me to test the representation of information and ideas as ‘form’ within space that is constantly generated and regenerated as a result of fresh input. The hypothesis being that this real time configuration of space using light offers a variety of new perceptions ranging from information sharing to public art never experienced previously. In this paper I consider the technical and media implications of extending conventional 2D screens, which are limited currently to architectural cladding, into a 3D matrix thereby inducing an alteration in spatial perception via the content animating the 3D matrix. The content is the result of an information injection derived from sensors of what from ever, where data have been captured and translated into a digital signal.
keywords Interactivity, content, real-time, spatial
series eCAADe
email
last changed 2022/06/07 07:50

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 27HOMELOGIN (you are user _anon_821750 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002