Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2007_049
id	ascaad2007_049
authors	Mokbel, H.; G. Salazar, M. Aboulezz and J. Tocci
year	2007
title	Choosing Levels of Granularity in Building Information Modeling: Contractor’s Perspective
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 623-634
summary	Over the last two years, there has been an increased interest across the Architectural /Engineering/ Construction (A/E/C) professionals in the potential adoption of the Building Information Modeling. Professional Associations such as the American Institute of Architects (AIA), the Associated General Contractors (AGC) and the Design-Build Institute of America (DBIA) are dedicating specific resources to better understand the implications of the use of this concept in their professional activities. However, not much ground has been gained yet in finding practical ways to choose the level of granularity (LOG) or detail that is needed to develop the digital model in a cost effective fashion. Choosing the Level of Granularity (LOG) of the digital model or level of detail development that goes into the model is a key decision that results from careful consideration of many factors. It is a very complex and iterative process that requires a critical assessment of the cost of adding details to the digital model versus the benefits derived from its intended purpose whether the model will be used to enhance the communication process or to support the construction management functions performed by the firm. This paper presents two case studies in which the authors have been directly involved in making the decision on the LOG of the digital model. The first case involves the Togar Suites, Union Station project in New Jersey while the second case refers to the Worcester Trail Courthouse in Worcester Massachusetts. In both cases, the 3D models were developed primarily for visualization of the construction sequence. However, in the case of the Togar Suites the contractor also needed the model for trade coordination and clash detection purposes.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_024
id	ascaad2007_024
authors	Schneider, S.; C. Tonn, F. Petzold and D. Donath
year	2007
title	Designing with images: Augmented reality supported on-site Trompe l’oeil
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 275-290
summary	Activities in the building industry in Germany concentrate increasingly on a combination of renovation and new-build. A look at current computer aided applications reveals a serious lack of IT support for the whole architectural design process with and within existing buildings (e.g. building surveying, designing on site and the preparation of information for further use in later planning stages). An ongoing interdisciplinary research project undertaken jointly by the faculty of media and the faculty of architecture is investigating methods and techniques for the computer-aided support of the design process with and within existing buildings. The goal is to develop a hardware and software concept for a “design-toolbox” based on SAR (spatial augmented reality) and to implement aspects of it as prototypes. The paper focuses on one aspect of the research project – designing with images in an AR-Environment. The paper presents an overview of the project, a description of the core model based on a client-server architecture, the historical / theoretical architectural background and first results of this research part. The project is funded by the “German Research Foundation (DFG)”.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_002
id	ascaad2007_002
authors	Abdellatif, R. and C. Calderon
year	2007
title	SecondLife: A Computer-Mediated Tool for Distance-Learning in Architecture Education?
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 17-34
summary	Despite the importance of distance learning for its ability to reach a wide audience, easiness to access materials, and its lower cost compared to traditional learning, architecture education has not been well served by distance education. This is because it has a higher level of learning objectives, it is taught by coaching methodologies, and involves nonverbal forms of communication. One of the most common learning methods used in the design studio is the Criticism/Critique, which is a graphic and oral type of communication between the tutor and the students. In this investigation, Second Life, a massive multi-user online virtual environment that offers three-dimensional spatial capabilities via Avatars impersonation, is used as a computer-mediated tool for text and graphic-based communication in a distance learning situation. The study describes a demonstration experiment where students had to communicate with their tutor, display and describe their projects at a distance, in a purposely designed criticism space in SecondLife. The main objective of this paper is to observe and document the effects and the use of SecondLife virtual environment as an online 3D graphical-based tool of computer-mediated communication in distance learning in architecture education. The study also answers some questions: How well did the students use the tools of the medium provide? Was there a sense of personal communication and realism gained through using Avatars in the virtual environment? Did SecondLife provide a successful means of communication for a graphic-based context? And what are the students’ opinions about the learning environment? Using multiple methods of data collection, mainly based on an electronic observation of the experiment, questioning the participants before and after the experiment, and the analysis of the chat transcripts, the study presents descriptive results of the experiment, and discusses its main features. Proposals for modifications are made for future replications.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_152
id	ecaade2007_152
authors	Ahmad, Sumbul; Chase, Scott C.
year	2007
title	Transforming Grammars for Goal Driven Style Innovation
doi	https://doi.org/10.52842/conf.ecaade.2007.879
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 879-886
summary	Shape grammar transformations have been used for developing new design styles by the systematic modification of grammars that encode existing styles. We make use of a style description scheme to aid grammar transformations for goal driven style change. A rule base was authored for the design of Greek temple facades, and was augmented with a style description scheme. These were tested at a student workshop wherein students were asked to develop grammars based on given style briefs. Results gained from the workshop confirmed that most students were able to assemble and transform grammars successfully. The method was found to be useful for teaching style and grammars to students and novice designers.
keywords	Design grammars, style, generative design, teaching
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2007_af77
id	sigradi2007_af77
authors	Amorim Côrtes, Marta; Arivaldo Leão de Amorim
year	2007
title	Digital Photogrammetric Restitution of the Pelourinho’s Façades, in Salvador - Bahia, Brazil [Restituição fotogramétrica digital das fachadas do pelourinho, Salvador – Bahia, Brasil]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 375-379
summary	Brazil has so many historical cities with important architectural heritage. Some of them are remains of the colonial times and aggregate beautiful buildings such as, palaces, public buildings and churches in baroque style, legacy of the Portuguese colonization. Despite of its cultural value, most of these building sets are under several kinds of threats. This paper discusses about the experience on digital photogrammetric restitution of the building façades of Pelourinho, a neighborhood in the historical center of Salvador, the capital city of the State of Bahia. The architectural documentation is an important way to preserve and safeguard its memory, besides being an effective educational process about the meaning of preservation and cultural heritage.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia07_146
id	acadia07_146
authors	Angulo, Antonieta
year	2007
title	Ubiquitous Training of Visual-Spatial Skills: On the Development of Mobile Applications Using Handheld Devices
doi	https://doi.org/10.52842/conf.acadia.2007.146
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 146-155
summary	This research project seeks to develop m-learning applications that provide training in visual-spatial skills using wireless handheld mobile devices (e.g. PDAs and cellular phones). The paper acknowledges the role of visual-spatial competence as fundamental in science and most creative endeavors, including its critical role in architectural design. It also recognizes that there is a substantial amount of anecdotal evidence suggesting that undergraduate students in architecture have serious limitations in applying visual-spatial skills for design activities. A potential solution to this problem is envisioned through the introduction of extra-curricular learning activities that are ubiquitous and learner-centered. The suggested m-learning applications will include a set of instructional modules making use of media-rich representations (graphics and animations) for conveying the nature of 3-D spaces. As a first step toward reaching this development, a prototype was created and used for testing learning strategies. This experiment provided evidence regarding improvements to specific aspects of the students’ visual-spatial competency, and it also collected qualitative feedback regarding the students’ level of satisfaction about the learning experience. The paper provides recommendations for a future implementation of the beta version, including the learning strategy, content authoring, publishing, deployment, and criteria for the selection of the most accessible mobile device.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2007_010
id	ecaade2007_010
authors	Artopoulos, Giorgos; Kourtis, Lampros
year	2007
title	The House of Affects Project
doi	https://doi.org/10.52842/conf.ecaade.2007.777
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 777-784
summary	The House of Affects is an experimental installation to be part of the PerFormaSpace project pursued at the University of Cambridge, UK (DIGIS) and Goldsmiths College London, U.C.L. (Digital Studios), currently partially funded by Arts&Business East 2006, in collaboration with Econavate, UK who will provide their technical expertise in fabrication using recycled materials. This paper presents project-specific information and theoretical discussion on the design process and the computational methods used to develop advanced adaptive structural components in relationship to behavioral goals, criteria and constraints.
keywords	Optimization, computational architecture, architectonics, adaptability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2007_077
id	ecaade2007_077
authors	Breen, Jack; Stellingwerff, Martijn
year	2007
title	The DigiTile Project
doi	https://doi.org/10.52842/conf.ecaade.2007.059
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 59-66
summary	The influx of computer-based design and presentation platforms, particularly in conjunction with computer aided physical modelling and manufacturing techniques, has stimulated a renewed focus on imaginative, innovative architectural product design. Essentially, the ambition of the DigiTile exercise was to stimulate the development of individual proposals for new kinds of surface articulations on the basis of a tile-like unit, or set of units. Inspirations varied widely: from precedents ranging from history to nature, as well as from contemporary design practice and graphic imagery. The prevailing freshness and technical inquisitiveness amongst the participants contributed to the generation and concretisation of distinctive tiling concepts, many of which have arguably not been seen before. The findings and conclusions are based upon the array of outcomes from the programme so far, as well from a very recent session. Furthermore, the paper highlights the kinds of opportunities for hands-on education-based compositional studies that we foresee in the near future.
keywords	Computer aided manufacturing and modelling, composition, prototyping, tiling, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia07_268
id	acadia07_268
authors	Cantrell, Bradley E.
year	2007
title	Ambient Space
doi	https://doi.org/10.52842/conf.acadia.2007.268
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 268-275
summary	An exploration of streetscape lighting that responds to site phenomena provides a basis to explore the abilities of sensor driven devices to construct landscape form. The project expresses multiple reactive spaces through a hypothetical design project on Pine Street in New York City. The landscape is the input using the variables of wind, sound, motion, and light in order to focus, open, lower, and contract each lighting device. As the landscape progresses throughout the day, season, and/or year, various relationships are created in form and light to organize spaces on multiple scales. Data becomes the armature for scripted reactions allowing the infrastructure to respond for safety or efficiency. With the proliferation of sensor networks and sensor systems, the possibilities arise for the re-articulation of data expression. The single lighting device works within a network that is connected by the specifi c phenomenology of the site. The project is grounded historically in the landscape folly, an architectural device that is not what it appears to be (Figure 1).
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2011_p135
id	cf2011_p135
authors	Chen Rui, Irene; Schnabel Marc Aurel
year	2011
title	Multi-touch - the future of design interaction
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 557-572.
summary	The next major revolution for design is to bring the natural user interaction into design activities. Graphical User Interfaces (GUI) brought a new approach that was more effective compared to their conventional predecessors. In recent years, Natural User Interfaces (NUI) have advanced user experiences and multi-touch and gesture technologies provide new opportunities for a variety of potential uses in design. Much attention has been paid to leverage in the design of interactive interfaces. The mouse input and desktop screen metaphors limit the information sharing for multiple users and also delayed the direct interaction for communication between each other. This paper proposes the innovative method by integrating game engine ‘Unity3D’ with multi-touch tangible interfaces. Unity3D provides a game development tool as part of its application package that has been designed to let users to focus on creating new games. However, it does not limit the usage of area to design additional game scenarios since the benefits of Unity3D is allowing users to build 3D environments with its customizable and easy to use editor, graphical pipelines to openGL (http://unity3d.com/, 2010 ). It creates Virtual Reality (VR) environments which can simulates places in the real world, as well as the virtual environments helping architects and designers to vividly represent their design concepts through 3D visualizations, and interactive media installations in a detailed multi-sensory experience. Stereoscopic displays advanced their spatial ability while solving issues to design e.g. urban spaces. The paper presents how a multi-touch tabletop can be used for these design collaboration and communication tasks. By using natural gestures, designers can now communicate and share their ideas by manipulating the same reference simultaneously using their own input simultaneously. Further studies showed that 3Dl forms are perceived and understood more readily through haptic and proprioceptive perception of tangible representations than through visual representation alone (Gillet et al, 2005). Based on the authors’ framework presented at the last CAADFutures, the benefits of integrating 3D visualization and tactile sensory can be illustrated in this platform (Chen and Wang, 2009), For instance, more than one designer can manipulate the 3D geometry objects on tabletop directly and can communicate successfully their ideas freely without having to waiting for the next person response. It made the work more effective which increases the overall efficiency. Designers can also collect the real-time data by any change they make instantly. The possibilities of Uniy3D make designing very flexible and fun, it is deeply engaging and expressive. Furthermore, the unity3D is revolutionizing the game development industry, its breakthrough development platform for creating highly interactive 3D content on the web (http://unity3d.com/ , 2010) or similar to the interface of modern multimedia devices such as the iPhone, therefore it allows the designers to work remotely in a collaborative way to integrate the design process by using the individual mobile devices while interacting design in a common platform. In design activities, people create an external representation of a domain, often of their own ideas and understanding. This platform helps learners to make their ideas concrete and explicit, and once externalized, subsequently they reflect upon their work how well it sits the real situation. The paper demonstrates how this tabletop innovatively replaces the typical desktop metaphor. In summary, the paper addresses two major issues through samples of collaborative design: firstly presenting aspects of learners’ interactions with physical objects, whereby tangible interfaces enables them constructing expressive representations passively (Marshall, 2007), while focussing on other tasks; and secondly showing how this novel design tool allows designers to actively create constructions that might not be possible with conventional media.
keywords	Multi-touch tabletop, Tangible User Interface
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ascaad2007_043
id	ascaad2007_043
authors	Chen, G.-Y. M.
year	2007
title	Tagging Your Body Virtually : Represent a place making process with social network
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 543-558
summary	This research focuses on the virtual environment of place making. In this paper we would like to emphasize that the place making should be stressed collective views in order to obtain the design application of possibilities. However, in past researches there has been no study that tried to collect the collective views by digital ways. Accordingly, this paper proposes a response thought the Spatial Intention. It could be used to represent the human of body experience. The "moving" and "standing" are appropriate to two main considerations. Both of these could be connected to the action of "focus" and "choice." these leads to a sequential relationship of place production. The positive significance of the spatial intention lies in the convertibility of physical experience could be implied with a specific understanding. It also could be used to mold the place of knowledge structure. Thereby in order to verify the reliability of the above, we made a social network of virtual environment and used the rapid prototyping method to develop a prototype system. Implementing on the Chinese garden of the actual case, we found that the tag could concentrate as an entire sense in somewhere of place. These tags also could be shared remotely through the social network. Different tags in the sharing mechanism could collage out a place of collective views. This perspective would be used to assist designers to understand the sense of place. It also would be applied to find out the environmental design of possibilities in the future studies.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_273
id	caadria2007_273
authors	Chitchian, Davood; H.C. Bekkering
year	2007
title	Sustaining Design Decision Makers in the AEC industry
doi	https://doi.org/10.52842/conf.caadria.2007.x.w3a
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Today’s typical decision making problem such as strategic planning, portfolio analysis, resource allocation and human resource management involves a variety of tangible and intangible strategic goals, conflicting constraints, dozens or hundreds of alternative initiatives to be pursued, and limited resources. A decision maker cannot meaningfully combine all of this information to make right decisions. To sustain decision makers in the Architecture, Engineering and Construction (AEC) industry, this paper proposes a tool to transfers a complex problem into a concept of hierarchical structure consisting of goal and its criteria and sub-criteria. Irrespective of the applied domains, this tool provides a flexible means for tackling the complex decision making process. It embeds a mathematical model for prioritization and decision making which is based on the Analytical Hierarchy Process (AHP).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_076
id	ecaade2007_076
authors	Coates, Paul S.; Derix, Cristian
year	2007
title	Parsimonious Models of Urban Space
doi	https://doi.org/10.52842/conf.ecaade.2007.335
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 335-342
summary	This paper sets out an approach to urban modelling derived from early work with cellular automata and agglomeration models. In these cases the models are an example of distributed representation, where the rules built in to the model are replicated in all the discrete components of the model be they cells or agents. This is the classic AI. / AL paradigm of emergent systems. The paper describes the main structure of the models, and presents examples of the use of this modelling process in design education, pointing out the way dynamic models allow mapping on to interesting speculations about the dynamic of the city, and its social systems. The paper ends with a report on the use of such models as a design decision support system and how they will be used in planned work in master planning in the London Thames gateway area under the UK govt. sustainable communities initiative.
keywords	Urban modeling, space syntax, agent based modeling, cellular automata
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ascaad2007_014
id	ascaad2007_014
authors	Dritsas, S. and E. Rafailaki
year	2007
title	A Computational Framework for Theater Design
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 165-182
summary	This paper presents the results of an ongoing research on computational methods for the design of theatrical spaces. We demonstrate a systemic approach to design supported by a set of digital tools implemented for assisting the process. The primary purpose of the framework is to establish a formal basis for expressing and exploring explicit design criteria. At this stage the framework enables us to metrically access a range of design metrics that traditionally have been addressed through primarily architectural narrative. Moreover, our method strives in establishing a background where knowledge can be explicitly encoded and the results of analytical methods can be additively employed. In the future, the framework will assist as the platform for experimenting with generative or query-based design processes empowered by computation. We structured this paper / framework around three conceptual units: (a) a design intent toolkit assisting the processes of rapidly generating theater configurations; (b) an analytical system that evaluates a range of design metrics centered about aspects of visual comfort; and (c) a post-processing and visualization unit that binds the design metrics with existing data / studies and provide a range of representation methods. Overall, the methodology adopts existing knowledge in theatrical design, challenges traditional ideas of understanding the theater and proposes methods for evaluating its architectural performance. The conclusions focus on highlighting both the limitations and the potential of our system in the process of theater design. We also extend outside the boundaries of the current research into a brief discussion on the methodological impact of digital technology in architectural research. Finally we propose areas of future research and development.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	acadia07_016
id	acadia07_016
authors	Druckrey, Tim
year	2007
title	Five Excursions
doi	https://doi.org/10.52842/conf.acadia.2007.016
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 16-24
summary	In the history of mechanical contrivances, it is difficult to know how many of the automata of antiquity were constructed only in legend or by actual scientific artifice. Icarus’s wings melt in the light of historical inquiry, as they were reputed to do in the myth; but was the flying automaton, attributed to a Chinese scientist of c. 380 BC actually in the air for three days, as related? (The same story is told of Archytas of Tarentum.) The mix of fact and fiction is a subject of critical importance for the history of science and technology; for our purposes, the aspirations of semi-mythical inventors can be as revealing as their actual embodiment.
series	ACADIA
last changed	2022/06/07 07:55

_id	sigradi2007_af11
id	sigradi2007_af11
authors	Forzán Gómez, José Antonio
year	2007
title	Towards a cartography of the fantastic places [Hacia una Cartografía de los Espacios Fantásticos]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 444-447
summary	Fantastic literature has been a reflection object from diverse perspectives. Someone has been in its narrative, myths, processes, intertextuality and a series of conceptualizaciones and interpretations, from the russian formalism to the deconstructivism. This communication presents a possible classification of the fantastic spaces, which goes from the human inside towards the impossible sites. The idea becomes from a dialogue between books of the imagination and Roland Barthes semiology. For each ordering, a text is suggested as a model; as much of classic authors as contemporary. The classification allows a better understanding of fantastic literature and its plays of reality, as well as the narratologics possibilities as much instrumental of creative and applied reading to fields like the cinema, the publicity, the painting, the design, the staging and the ethical formation.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	c2f9
id	c2f9
authors	Friedrich E, Derix C and Hannah S
year	2007
title	Emergent Form from Structural Optimisation of the Voronoi Polyhedra Structure
source	Proceedings of the Generative Arts conference, Milan, 2007
summary	In the course of the exploration of computational means in the architectural design process, in order to investigate more complex, adaptive geometries, the Voronoi diagram has recently gained some attention, being a three-dimensional space-filling structure which is modular but not repetitive. The project looks at the Voronoi diagram as a load-bearing structure, and whether it can be useful for structural optimisation. Hereby the edges of the Voronoi polyhedra are regarded as structural members of a statical system, which then is assessed by structural analysis software. Results seem to indicate that the Voronoi approach produces a very specific structural as well as spatial type of order. Through the dislocation of the Voronoi cells, the statical structure becomes more complex through emergent topology changes, and the initially simple spatial system becomes much more complex thorough emerging adjacencies and interconnections between spaces. The characteristics of the emerging form, however, lie rather in the complexity how shifted spaces and parts are fitted together, than in a radical overall emergent geometry. Spatially as well as a structurally, the form moves from a simple modular repetitive system towards a more complex adaptive one, with interconnected parts which cannot stand alone but rather form an organic whole.
keywords	complex geometry, emergence, adaptive topology, voronoi diagram
series	other
type	normal paper
email
more	http://www.generativeart.com/
last changed	2012/09/20 18:25

_id	ascaad2007_001
id	ascaad2007_001
authors	Germen, M.
year	2007
title	Virtual Architecture: Reconstructing Architecture Through Photography
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 1-16
summary	The concept of construction in architectural design process is a temporary action that exists for a while and transforms itself into another product; i.e. the final building to be inhabited. Construction site can be taken as a podium where a play-to-remain-incomplete is being staged. The incompleteness causes us to dream, due to the fact that a complete building loses its narrative potential as it informs us about all the necessary pieces that constitute the whole: There is no puzzle to solve... Construction in this sense is like a historical ruin; Paul Zucker asserts that "ruins have held for a long time a unique position in the visual, emotional, and literary imagery of man. They have fascinated artists, poets, scholars, and sightseers alike. Devastated by time or willful destruction, incomplete as they are, they represent a combination of man-made forms and of organic nature." Architectural photography has the potential of re-creating this puzzle back again in order to bring an alternative representation to architecture. The architectural photographer is sometimes offered the freedom of reinterpreting, reconstructing architecture in order to be able to present a novel virtual perception to the audience. The idea here is to get some spatial clues that can later be used in other architectural projects. I was personally invited to two different concept exhibits in which I was given the freedom of inventing a virtual architecture through photography. The concept text written for one of these exhibits goes as follows: “I went, saw, stopped, attempted to grasp and enter it, looked at construction process and workers with respect, tried to internalize, wanted to claim it for a while, dreamed of creating a microcosm out of the macrocosm I was in, shot and shot and shot and finally selected: The created world, though intended for all, was probably quite a personal illusion...” Virtual architecture is a term used for architecture specifically created in the computer environment and never used in the realm of architectural photography. People like Piranesi, Lebbeus Woods, M.C. Escher, Marcos Novak, etc. previously dreamed about architectures that could exist virtually on paper, screen, digital environments. This paper will try to prove that this practice of (re)designing architecture virtually can be transferred to one of the most important realms of visuality: Photography. Various digital processes like stitching multiple photos together and mirroring images in image editing software like Photoshop, allow this virtual architecture to take place in the computer environment. Following this, I propose to raise the term “snap architecture” to connect it to the frequently referred concept of “paper architecture.”
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_060
id	ascaad2007_060
authors	Gillispie, D. and C. Calderon
year	2007
title	A framework towards designing responsive public information systems
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 767-782
summary	"Evolving effective responsive systems, and creating a credible interface between the work and the user, requires an awareness of many different types of user, contexts and functions as well as the phenomenological aspects of social and environmental conditions." (Bullivant, 2006). Responsive design and interactive architecture operates at the intersection of Architecture, Arts, Technology, Media Arts, HCI and Interaction Design in a physical context suggesting ways in which the existing physical environments can be augmented and extended adding a greater level of depth, meaning and engagement with the world around us. Through a series of case studies, this paper explores a number of principles which may be applied to the design of responsive environments of which public information systems form part. Divided into three main sections, the paper first explains how responsive environments have addressed the application of public information systems, secondly, through a series of case studies, precedents are highlighted which lead to development of principles for developing designs for responsive environments. The third section discusses and elaborates on these principles which have been developed based upon our own interpretations and grouping of precedents and approaches towards interaction design. This paper contributes towards the field of responsive environments and interactive architecture through an analysis of case studies to infer a framework from which responsive environments may be created and developed.
series	ASCAAD
email
last changed	2008/01/21 22:00

For more results click below: