Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	ijac20075209
id	ijac20075209
authors	Kersten, Thomas P.
year	2007
title	Virtual Reality Model of the Northern Sluice of the Ancient Dam in Marib/Yemen by Combination of Digital Photogrammetry and Terrestrial Laser Scanning for Archaeological Applications
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 340-354
summary	In this paper the potential of digital photogrammetry and terrestrial laser scanning in combination is demonstrated in the recording and 3D CAD construction of the northern sluice of the ancient dam in Marib/Yemen, which is located approx. 150 kilometre east of the capital city Sana'a, close to the inner Arabic desert. The Yemeni government proposed for initiation of the building into the list of the UNESCO world cultural heritage. This described project work is a co-operation between the Commission for Archaeology of Non-European Cultures (KAAK) Bonn of the German Archaeological Institute (DAI) and the department Geomatics of the HafenCity University Hamburg. The object recording was carried out in January 2006 with the digital SLR camera Fujifilm FinePix S2 pro and the terrestrial laser scanner Trimble GS100 during the archaeological excavations. The northern sluice was reconstructed and visualized as a computer-based 3D CAD model for archaeological investigations (as-builtdocumentation of the excavations) and for future tourism advertising and publication purposes.
series	journal
last changed	2007/08/29 16:23

_id	ecaade2007_063
id	ecaade2007_063
authors	Petzold, Frank; Bimber, Oliver; Tonn, Christian
year	2007
title	CAVE without CAVE
doi	https://doi.org/10.52842/conf.ecaade.2007.161
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 161-168
summary	Activities in the building industry in Germany concentrate increasingly on a combination of renovation and new-build. A look at current computer aided applications reveals a serious lack of IT support for the whole architectural design process in and within existing buildings (e.g. building surveying, designing on site and the preparation of information for further use in later planning stages). An ongoing interdisciplinary research project undertaken jointly by the faculty of media and the faculty of architecture is investigating methods and techniques for the computer-aided support of the design process in and within existing buildings. The goal is to develop a hardware and software concept for a “design-toolbox” based on SAR (spatial augmented reality) and to implement aspects of this as prototypes. This paper describes the goals of the “Spatial Augmented Reality for Architecture” project and discusses possible fields of application for SAR for supporting the design process in existing buildings from a user’s perspective. This paper presents the initial results of the project, the development of a cave-like hardware and software concept called “low-cost projection in room corners” and the description of the core concept based on a client-server architecture. The project is funded by the “German Research Foundation (DFG)”.
keywords	Augmented reality, virtual reality, design support, renovation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ascaad2007_024
id	ascaad2007_024
authors	Schneider, S.; C. Tonn, F. Petzold and D. Donath
year	2007
title	Designing with images: Augmented reality supported on-site Trompe l’oeil
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 275-290
summary	Activities in the building industry in Germany concentrate increasingly on a combination of renovation and new-build. A look at current computer aided applications reveals a serious lack of IT support for the whole architectural design process with and within existing buildings (e.g. building surveying, designing on site and the preparation of information for further use in later planning stages). An ongoing interdisciplinary research project undertaken jointly by the faculty of media and the faculty of architecture is investigating methods and techniques for the computer-aided support of the design process with and within existing buildings. The goal is to develop a hardware and software concept for a “design-toolbox” based on SAR (spatial augmented reality) and to implement aspects of it as prototypes. The paper focuses on one aspect of the research project – designing with images in an AR-Environment. The paper presents an overview of the project, a description of the core model based on a client-server architecture, the historical / theoretical architectural background and first results of this research part. The project is funded by the “German Research Foundation (DFG)”.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_064
id	ecaade2007_064
authors	Tonn, Christian; Donath, Dirk; Petzold, Frank
year	2007
title	Simulating the Atmosphere of Spaces
doi	https://doi.org/10.52842/conf.ecaade.2007.169
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 169-176
summary	At present more than half of all building activity in the German building sector is undertaken within existing built contexts. Work in existing building fabric is an essential aspect of most architects’ activities. The development of a conceptual and technological basis for the digital support of design directly on site, in and with the available architecture is the main focus of the research project “Spatial Augmented Reality for Architecture”. This article describes one part of the research project: the sampling of colours and materials at a scale of 1:1 using Augmented Reality technologies. This makes it possible to project the colour and material qualities of a design directly onto any surface within an existing building, geometrically corrected. A first software prototype SAR-CA has been developed and then assessed using a user study to obtain a first evaluation of the prototype to determine the direction of future research. Future research areas are discussed at the end of the paper.
keywords	Augmented reality, design support, colour and material sampling
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2007_094
id	ecaade2007_094
authors	Buattour, Mohamed; Halin, Gilles; Bignon, Jean Claude
year	2007
title	Management system for a Virtual Cooperative Project
doi	https://doi.org/10.52842/conf.ecaade.2007.125
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 125-131
summary	The paper presents on-going research aimed at the support of the management of building projects and the aid cooperative design. Today, The use of systems adapted to the cooperative design assistance for the building domain is complex. This results from the complexity of the cooperative work (difficulties in tracking actor’s work, lack of most of the required information, coordination problems, implicit nature of most of the construction activities etc.) The paper will briefly review two data exchanging modes that we had defined. After, on the basis of this concept of cooperative design we describe a new model of a virtual environment aimed to takes into account the relational organization of the project and the semantic meaning of works. This research represents a new approach because it not based on management of documents but on all data relative to works. Finally, we use this new model for defining a design-aided tool, to deduce advantages and limits of the “Virtual Cooperative Project”. This system lets geographically dispersed project actors model the project context of a building. More specifically, it allows interpreting, using and exchanging project works in a centralized virtual environment during the building life cycle. This system uses IFC objects which associate in the same model the semantic and the 3D representation of building works.
keywords	Cooperation model, cooperative work design, project management, digital mock-up
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2007_373
id	cf2007_373
authors	Chan, Chiu-Shui
year	2007
title	Does Color Have Weaker Impact on Human Cognition Than Material?
source	Computer Aided Architectural Design Futures / 978-1-4020-6527-9 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Futures / 978-1-4020-6527-9] Sydney (Australia) 11–13 July 2007, pp. 373-384
summary	This project intends to develop a method for using virtual reality (VR) to represent a built environment for simulating environmental influences on occupants. Objectives of the project were to explore: (1) what environmental stimuli would affect habitants’ perception, and (2) what possible factors in the built environment would affect occupants’ cognition. An office was selected as the subject of study. Methods were to create a number of digital models, each containing an embedded variable, and then test the impact of environmental influences on visual perception. Results obtained in this study indicate that materials have stronger impact to human perception than colors, and VR has great potential for design decision making and post-occupancy evaluation.
series	CAAD Futures
email
last changed	2007/07/06 12:47

_id	be0c
id	be0c
authors	Hamza N, Horne M
year	2007
title	An operational model for teaching low energy architecture
source	Building and Environment Volume 42, Issue 11, November 2007, Pages 3841-3847 July 2007
summary	Awareness of the need to integrate sustainability at all levels has recently been gaining momentum in education to meet pedagogical university policy, government and employers’ expectations. Within the school of the Built Environment at Northumbria University an integrated course delivery has been adopted for second year students. This proposal intends to disseminate an operational model for integrating teaching and assessment between three modules which have traditionally been taught and assessed separately to achieve a low-energy house.
keywords	low-energy architecture, virtual reality, integrated curriculum, project decision making, mapping learning outcomes
series	other
type	normal paper
email
more	http://dx.doi.org/10.1016/j.buildenv.2006.11.003
last changed	2008/03/14 00:25

_id	ascaad2007_005
id	ascaad2007_005
authors	Loh, E.; N. Dawood and J. Dean
year	2007
title	Integration of 3D Tool with Environmental Impact Assessment (3D EIA)
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 51-66
summary	Environmental Impact Assessment (EIA) tools have been available for some years now and their function is predominantly to predict and identify the environmental impact of building projects. However EIA analysis is often done after the completion of the project or building and when it is too late to influence the design, materials or components to be used. Also, more than 80% of the design decisions that influence the whole life cycle of a building are made at the initial design phase. EIA does not receive the required attention. A new approach is suggested in this research to ensure that designers, clients and stakeholders have all of the relevant information needed at the outline design stage for the assessment of cost and environmental impact. The idea is that building owners and users will have the opportunity to minimise their operating costs from ‘cradle to cradle’. As energy resources reduce over the next few decades, the value of this research will increase and it is possible to foresee government legislation which drives building construction in this direction. By making environmental impact analysis readily linked to 3D products at the very early stage of the design process, the value of 3D technology will be enhanced significantly resulting in more use of the technology in the construction process. In this context, the objective of this paper is to introduce and explore approaches for developing integrated 3D- EIA, LCA (Life Cycle Analysis) and LCCA (Life Cycle Cost Analysis) and VR (Virtual Reality) tools and develop trade-off analysis to assist in the decision making process. To demonstrate initial results, a pilot case study in the UK is being developed.
series	ASCAAD
last changed	2008/01/21 22:00

_id	ascaad2007_049
id	ascaad2007_049
authors	Mokbel, H.; G. Salazar, M. Aboulezz and J. Tocci
year	2007
title	Choosing Levels of Granularity in Building Information Modeling: Contractor’s Perspective
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 623-634
summary	Over the last two years, there has been an increased interest across the Architectural /Engineering/ Construction (A/E/C) professionals in the potential adoption of the Building Information Modeling. Professional Associations such as the American Institute of Architects (AIA), the Associated General Contractors (AGC) and the Design-Build Institute of America (DBIA) are dedicating specific resources to better understand the implications of the use of this concept in their professional activities. However, not much ground has been gained yet in finding practical ways to choose the level of granularity (LOG) or detail that is needed to develop the digital model in a cost effective fashion. Choosing the Level of Granularity (LOG) of the digital model or level of detail development that goes into the model is a key decision that results from careful consideration of many factors. It is a very complex and iterative process that requires a critical assessment of the cost of adding details to the digital model versus the benefits derived from its intended purpose whether the model will be used to enhance the communication process or to support the construction management functions performed by the firm. This paper presents two case studies in which the authors have been directly involved in making the decision on the LOG of the digital model. The first case involves the Togar Suites, Union Station project in New Jersey while the second case refers to the Worcester Trail Courthouse in Worcester Massachusetts. In both cases, the 3D models were developed primarily for visualization of the construction sequence. However, in the case of the Togar Suites the contractor also needed the model for trade coordination and clash detection purposes.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ecaade2007_187
id	ecaade2007_187
authors	Pratschke, Anja; Tramontano, Marcelo
year	2007
title	No Man is an Island (Even in the Virtual World): The Online_Communities Project
doi	https://doi.org/10.52842/conf.ecaade.2007.703
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 703-709
summary	This article is based on the results of various research projects on the use of Information and Communication Technologies (ICT) to reduce the digital divide in poor neighborhoods at Nomads.usp Research Center (Center for Studies on Interactive Living, www.eesc.usp.br/nomads). Among them is the Online_Communities project, which has been financed by the São Paulo State Research Funding Agency - FAPESP since 2004 involving four research groups from both the Architecture and Computer Science departments at the University of São Paulo and various public and non-governmental organizations. The Online_Communities project proposes a diversified approach in order to cover the different aspects of the conception and implementation of a specific geographical complex communication system in a mixed reality scenario. It includes its network, the requalification of a local telecenter, meta-recycling activities, setting-up a graphic interface and presenting some workshops.
keywords	Public policies, Brazil, digital divide, collaborative network, interface
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2007_619
id	caadria2007_619
authors	Qian, Jingping; Chiu-Shui Chan
year	2007
title	Beijing Xidan business street plan evaluation
doi	https://doi.org/10.52842/conf.caadria.2007.x.p7s
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	In the international cooperative research project of "Utilizing Three-Dimensional Data in a Virtual Urban Environment to Support and Evaluate Planning Decisions" in Beijing, a digital city is constructed, and a set of planning regulations is established. This paper will give you a brief introduction to the programming of evaluating the city planning with ObjectARX accompaning AutoCAD. By loading the application programmed in Visual C++ on AutoCAD software platform, you can design a building and let the tool evaluate the design to generate graphic suggestions.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2007_006
id	ecaade2007_006
authors	Sampaio, Alcínia Zita; Henriques, Pedro Gameiro
year	2007
title	Building Activities visualized in Virtual Environments
doi	https://doi.org/10.52842/conf.ecaade.2007.085
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 85-90
summary	Normally, academic applications of computer-aided design in building project provide a visual presentation of the final state of the house and they are not able to produce changes in the geometry following the construction process. It was developed a didactic prototype that allows the visualization of the physical changes of the construction of a common external wall. In order to obtain models, which would be able to visually simulate the geometric evolution of the construction activity, techniques of geometric modeling and virtual reality were used. The visualization of the distinct physical steps of a construction is shown as 3D models following a specific planned schedule. The model makes it possible to view the physical evolution of the work, to follow the planned construction sequence and to visualize details of the form of every component of the works. It can be manipulated interactively allowing the student/teacher to monitor the physical evolution of the work and the construction activities inherent in its progression. The developed model brings new perspectives in the teaching activity as a support to expose new curricular programs or complex sequence construction.
keywords	Education, visual simulation, virtual reality
series	eCAADe
email
last changed	2022/06/07 07:56

_id	b840
id	b840
authors	Schnabel, Marc Aurel; Wang, Xiangyu; Seichter, Hartmut; Kvan, Tom
year	2007
title	From virtuality to reality and back
source	INTERNATIONAL ASSOCIATION OF SOCIETIES OF DESIGN RESEARCH 2007 (IASDR07) ©School of Design, The Hong Kong Polytechnic University 2007 Core A, The Hong Kong Polytechnic University Hung Hom, Kowloon, Hong Kong Editor: Sharon Poggenpohl 12-15 November 2007 ISBN 988-99101-4-4 Digital Proceedings, Day 4, Session D: INTERACTION/INTERFACE
summary	There has been a growing research interest in investigating techniques to combine real and virtual spaces. A variety of “reality” concepts such as Virtual Reality and Augmented Reality and their supporting technologies have emerged in the field of design to adopt the task of replacing or merging our physical world with the virtual world. The different realities can be tailored to enhance comprehension for specific design activities along a design life-cycle. This paper presents state-of-the-art applications of these “reality” concepts in design and related areas, and proposes a classification of these realities to address suitability issues for the effective utilization of the concepts and technologies. Their potentials and implications in certain design activities are also discussed.
keywords	Mixed Reality, Augmented Reality, Virtual Reality, Augmented Virtuality, Mediated Reality, Amplified Reality, Virtualized Reality
series	other
type	normal paper
email
more	http://158.132.218.50:8000/
last changed	2007/11/15 20:58

_id	sigradi2007_af102
id	sigradi2007_af102
authors	Venturelli, Suzete; Mario Luiz Belcino Maciel
year	2007
title	Art and Virtual Reality Research [El arte y la realidad virtual de investigación]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 393-396
summary	This text describes an art category which draws on the Augmented Reality (AR) Technology, which is capable of inspiring the copulation as well as the interaction, in real time, between images of reality, which might be those of the observer him/herself and the mental images, which might be artistic and generated by a computer. Stemming from the fusion of both types of image, where the former digitalises reality, whereas the latter simulates a three-dimensional image, a third image is obtained, which questions, it might be argued, reality itself. This text revolves around the attempt to demonstrate that AR is deemed a sub-group of Virtual Reality and its process as a whole as well as its imagetic system stems from the knowledge one has of the world, the exactness of reproduction one may attain of it and, finally, from the metaphor of one’s presence in it.
keywords	Art; Augmented Reality Technology; Art and Technology; Virtual Reality; Computer Art
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ijac20075208
id	ijac20075208
authors	White, Martin; Petridis, Panagiotis; Liarokapis, Fotis; Plecinckx, Daniel
year	2007
title	Multimodal Mixed Reality Interfaces for Visualizing Digital Heritage
source	International Journal of Architectural Computing vol. 5 - no. 2, pp. 322-337
summary	We have developed several digital heritage interfaces that utilize Web3D, virtual and augmented reality technologies for visualizing digital heritage in an interactive manner through the use of several different input devices. We propose in this paper an integration of these technologies to provide a novel multimodal mixed reality interface that facilitates the implementation of more interesting digital heritage exhibitions. With such exhibitions participants can switch dynamically between virtual web-based environments to indoor augmented reality environments as well as make use of various multimodal interaction techniques to better explore heritage information in the virtual museum. The museum visitor can potentially experience their digital heritage in the physical sense in the museum, then explore further through the web, visualize this heritage in the round (3D on the web), take that 3D artifact into the augmented reality domain (the real world) and explore it further using various multimodal interfaces.
series	journal
last changed	2007/08/29 16:23

_id	ascaad2007_006
id	ascaad2007_006
authors	Afify, H.M.N. and Z. A. Abd ElGhaffar
year	2007
title	Advanced Digital Manufacturing Techniques (CAM) in Architecture
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 67-80
summary	Building projects today are not only born out digitally, but they are also realized digitally through "file-to-factory" processes of computer aided manufacturing (CAM) and computer numerically controlled (CNC) technologies. It was the challenge of constructability that brought into question, what new instruments of practice are needed to take advantage of the opportunities opened up by the digital modes of production, instead of whether a particular form is buildable. In this case of building construction, architects could design with attention to innovative details, afforded by unique shapes and sizes, knowing that whatever they created on their computer screen could be fabricated digitally for an affordable price. The aims of the research are to discuss and analyze the digital manufacturing techniques (CAM) in architecture and its fabrication, production process. To understand how these technologies fit within a broader context of architectural practice. The research begins with defining, what is digital manufacturing in architecture, its potentials, components and influences in the contemporary architecture. Further more it discusses the digital fabrication, Two- dimensional cutting, subtractive fabrication, additive fabrication and formative fabrication. The assembly technique, building skin, new materials and mass- customization in digital manufacturing techniques (CAM). That will be a hand in analyzing several case studies.
keywords	Digital technology in architecture, Digital manufacturing, Formative fabrication, New materials, Fabrication machines and software.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ascaad2007_017
id	ascaad2007_017
authors	Alamgir, S.; A. Khan and K. Alamgir
year	2007
title	Computer Aided Environmental Solutions: Evaluation of Optimum Building Orientation in Lahore, Pakistan
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 213-214
summary	One of the primary features of solar passive design is the orientation of a building on a particular latitude. The client of Information Technology demands testing, validity, practicality and sustainability of a building project before execution. The computer based simulations are the only practical way to predict the complex energy performance and analysis for a large number of passive design solutions. This paper investigates the optimum residential building orientation having various zones, located in Lahore, Pakistan, with the help of Energy Simulation program. It is concluded that with the help of software, it is possible to orient the residential plan with the minimum solar gain of the required living zones.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	caadria2007_283
id	caadria2007_283
authors	Ambrose, Michael A.
year	2007
title	BIM and Integrated Practice as Provocateurs of Design Education
doi	https://doi.org/10.52842/conf.caadria.2007.x.l3j
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Building Information Modeling (BIM) obfuscates the role of composition, scale and abstraction by displacing the primacy of abstract conventions of representation with a methodology based on simulation. BIM subverts, while simultaneously clarifying, the holistic relationships of the parts to the whole in the architectural design of form and space. Architectural design education has great opportunity and risk in how it comes to terms with re-conceptualizing design education pedagogy as the profession struggles to redefine the media and methods of architectural deliverables in the age of BIM. The paper examines the foundation issues proposed by Integrated Practice. The paper questions how BIM and modeled simulation of architectural assemblage might transcend current definitions of convention in design and construction representation. This paper explores how the academy might prepare students of architecture for a digital practice that focuses on the virtual building model and database management. BIM and Integrated Practice viewed as provocateurs of design education provide great potential for critical analysis of how architectural design is taught. The associated pedagogies are transforming the way in which architectural education engages issues of design and representation and creates opportunities to question the roles and rules of traditional conventions. The paper seeks to engage issues of design specificity and ambiguity related to the assets and liabilities of digital modeling as the primary means of design and representation that BIM represents.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ascaad2007_045
id	ascaad2007_045
authors	Bazlamit, R. and M. Verma
year	2007
title	Nature Replay: An immersive installation
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 571-586
summary	This project aims at addressing playgrounds and their utilization in current urban scenarios, in developing and under-developed countries. It experiments with digital technology to re-create a play space wherein children can actively engage with each other and the space utilizing upon a unique medium of play. As playgrounds have traditionally always been situated within a natural habitat or environment, this further reinforces the concept of developing the idea- based on something closely related to nature. Working around notions related to nature, music and how can children play around them; conceptualized ‘Nature rePlay”; an immersive environment making use of interactive digital media in both real urban settings and performing arts.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	sigradi2007_af87
id	sigradi2007_af87
authors	Borda Almeida da Silva, Adriane Borda; Janice de Freitas Pires; Elisabeth da Rosa Conill; Neusa Rodrigues Félix
year	2007
title	Technological language x scientific language: Structuring educational speeches for the area of digital graphics [Lenguaje tecnológico vs. lenguaje científico: Estructurando discursos educacionales para la gráfica digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 141-145
summary	This work looks to contribute to the structuring of educational speeches able to promote the use of the virtual space like laboratory for the simulation of the phenomenon of interaction between light and matter in different levels of similarity with the reality. The computer resources available for that present a technological specific language, mixing proceedings heuristics and physical. This demands of the students a detailed control of parameters, which need to be recognized and associated to the scientific knowledge. You being adopted “concept maps”, like strategy of attendance of processes of teaching / apprenticeship, these associations are set out, supplying sufficient elements to prepare, to revise and to enlarge the speeches open to question.
keywords	Concept Maps; Structures of Knowledge; Educational Speeches; Digital Graphics
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: