Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-25
id	ddss2008-25
authors	Antoni, Jean-Philippe; P. Frankhauser, C. Tannier, S. Youssoufi
year	2008
title	Simulating and assessing prospective scenariosA comparative approach in urban planning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The first part of the paper is centred on the phenomena of urban growth, in order to set the rules for a sustainable scenario of urban development. Then we enter the core of the paper that is the comparison of models. For each of the three compared models, we describe its main theoretical characteristics, the chosen parameters, and the obtained results. In section 6, heterogeneity of the produced results is discussed, and we highlight the points of interest and the lacks of the three models. Here we show that results we obtained feed debates about urban growth management. Finally, concluding remarks at the end of the paper address the general topic of the evaluation of the quality of simulation results.
keywords	Urban sprawl, sustainable development, fractals, cellular automata, spatial interaction models
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-09
id	ddss2008-09
authors	Bates-Brkljac, N.
year	2008
title	Towards client-focused architectural representationsas a facilitator for improved design decision-makingprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper focuses on architectural representations as a means of communicating design schemes in the process of decision-making. It reports on the study, which investigated people’s responses to different forms of architectural representations. The paper starts with the discussion about participation in decision-making process and the potential benefits of using computer generated representations. Then, it describes the research study and examines results of the investigation. In the final section it is argued that client focused architectural representations are needed to support the exchange of views and discussion amongst different stakeholders in order to reduce the requirement for trained interpretation and encourage the participation in the decision making process.
keywords	Architectural representations, Perceived credibility, Design decision making
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-32
id	ddss2008-32
authors	Chiaradia, Alain; Christian Schwander, Jorge Gil, Eva Friedrich
year	2008
title	Mapping the intangible value of urban layout (i-VALUL): Developing a tool kit for the socio-economic valuation of urbanarea, for designers and decision makers
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper we present the development of a GIS tool kit for the socioeconomic valuation of urban areas towards the creation of sustainable communities, describing the project context, development process, the tool kit’s structure, its main tools and initial feedback from its use. We then present the plan for training sessions and pilot projects where the tool kit is going to be used, and conclude with the discussion of the development of a single integrated tool to be used beyond the life of the ‘i-VALUL’ project. This project was supported by the UCL led UrbanBuzz programme within which UEL is a prime partner.
keywords	Urban planning, spatial analysis, design support tools, evaluation system, GIS
series	DDSS
last changed	2008/09/01 17:06

_id	cdc2008_377
id	cdc2008_377
authors	Conrad, Erik
year	2008
title	Rethinking the Space of Intelligent Environments
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 377-382
summary	Technologies are not mere exterior aids but interior changes of consciousness that shape the way the world is experienced. As we enter the age of ubiquitous computing, where computers are worn, carried or embedded into the environment, we must be careful that the ideology the technology embodies is not blindly incorporated into the environment as well. As disciplines, engineering and computer science make implicit assumptions about the world that conflict with traditional modes of cultural production. Space is commonly understood to be the void left behind when no objects are present. Unfortunately, once we see space in this way, we are unable to understand the role it plays in our everyday experience. In this paper, I argue that with the realization of the vision of ubiquitous computing, the fields of computer science and engineering reify the dominance of abstract space in real space. A new approach to the design of computing systems is necessary to reembody space. The social nature of the interface allows us to situate it within Henrí Lefebvre’s notions of space, providing new tools for thinking about how computing practice engages space as well as opening avenues to rematerialize the environment through embodied interaction.
email
last changed	2009/01/07 08:05

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-20
id	ddss2008-20
authors	Holanda, Frederico de; Valério Medeiros and Ana Paula Barros
year	2008
title	Integration through city space-formUsing space syntax, traffic modelling and geoprocessing tools forevaluating new urban developments
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	New boroughs are continuously being built in Brasilia, Brazil’s Capital City. The paper deals with the performance of such boroughs concerning sociospatial segregation. A comparison is made between two proposals for a new borough to the West of the North Wing of the Pilot Plan, which was originally designed by Lucio Costa. The first proposal was made by a wellknown architectural studio in Brasilia and is beginning to be implemented. The second proposal is an exercise made by undergraduate students from the School of Architecture of the University of Brasilia, under the supervision of one the authors of the paper. The two proposals present very different performances. In the first case, the borough is set apart from the immediate urban surroundings; there is no direct connection between inner roads and the main arteries that surround the site. In the second case, the students have proposed a scheme that connects the interior areas of the borough to the vicinity; we hardly know where the new borough begins vis-à-vis the neighbouring areas. We argue that there are serious traffic implications in the first case, as well as sociological implications. We deal with traffic modelling, space syntax techniques and geoprocessing tools to prove so. Furthermore, we will show how the building types are as well socially inadequate, for they will imply homogeneous social layers among the inhabitants – namely exclusively high-middle class living in the new area.
keywords	Space syntax, traffic modelling, urban expansion, urban design
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_091
id	ecaade2008_091
authors	Holzer, Dominik
year	2008
title	Let’s get Physical
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 125-132
doi	https://doi.org/10.52842/conf.ecaade.2008.125
summary	This paper presents an approach for familiarizing architecture students with concepts of environmental performance in the early design stages. A design studio was run at the University of Technology Sydney by Leena Thomas and the author where students were applying building performance analysis to inform their design process from the very beginning of the semester. Students were using parametric design and evolutionary structural optimization in conjunction with environmental performance optimization. Michael Hensel and Defne Sunguroglu (Ocean North) joined the studio at half time for a workshop to investigate how processes occurring in nature can be mapped to inform the morphological design process. In spite the multitude of challenges put to the students during the semester in regard to their design methodology and techniques, they were able to produce highly performative and aesthetically pleasing design outcomes.
keywords	environmental design, structural optimization, parametric design, design education, morphologic design exploration
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cdc2008_049
id	cdc2008_049
authors	Jaskiewicz, Tomasz
year	2008
title	Dynamic Design Matter[s]: Practical considerations for interactive architecture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 49-56
summary	This paper explores the concept of interactive architecture. The first section begins by formulating a daring vision of a radically new kind of architecture. In the second chapter this vision is further elaborated upon, by proposing a generic approach towards practically accomplishing the originally formulated theoretical concept. Opportunities and threats that emerge from this vision and approach are discussed in the third section and eventually, in section four and five, the proposed approach is brought to practical applications and illustrated with a number of experimental building component examples that all together include all necessary features to create a complete large scale architectural object. All projects and explorations have been conducted as part of the Hyperbody group’s research at the Delft University of Technology and have been inspired by group’s director, prof. Kas Oosterhuis.
email
last changed	2009/01/07 08:05

_id	cdc2008_243
id	cdc2008_243
authors	Loukissas, Yanni
year	2008
title	Keepers of the Geometry: Architects in a Culture of Simulation
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary	“Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed	2009/01/07 08:05

_id	ddss2008-44
id	ddss2008-44
authors	Manzato, Gustavo G.; Theo A. Arentze, Harry J. P. Timmermans and Dick Ettema
year	2008
title	An Agent for Supporting and Simulating Locations Decisions of Firms
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The objective of this paper is to present the scope and the contents of an agent for supporting and simulating location decisions of firms. An application of one of its features, which is related to finding a location for a given firm, is developed here as an illustration of the approach. We can conclude that the agent is able to perform an evaluation of suitable locations in space given a set of firm’s characteristics or requirements. Other features may also be derived, for example, finding firms that meet the environmental characteristics and also an attempt to simulate the allocation of firms, seeking a location, to the set of available locations.
keywords	Design & Decision Support Systems, Firm Location Decisions
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_45_session4b_364
id	caadria2008_45_session4b_364
authors	Muramoto, Katsuhiko; Sonali Kumar, Michael Jemtrud, Danielle Wiley
year	2008
title	Participation, Intersubjectivity, And Presence In a Digitally Mediated Workspace: A Participatory Design Studio between Pennsylvania State University and Carleton University
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 364-370
doi	https://doi.org/10.52842/conf.caadria.2008.364
summary	A paradigm shift in the world of architecture brought by the recent developments in visualization and communication technology not only offers us drastically different ways to collaborate, but also questions traditional location dependent collaborations. This new technology offers us new possibilities for a more phenomenologically rich mode of creative activity and participation. The goal of the Participatory Design Studio was to allow architecture students in multiple locations to collaborate in real-time by sharing computational resources, geometric datasets, and multimedia content including high-definition video. The technologies involved in this research include the National LambdaRail (layer 3, PacketNet with 1Gb/s connection) and CA*net 4 (Canadian broadband layer 2 with 10gb/s lightpath connectivity) allowing Standard Definition videoconference, utilization of Deep Computing Visualization, Remote Visual Networking (RVN) and Web Service access and control of the APN devices through the dashboard solution that makes integration seamless to the workflow and transparent to the user.
keywords	design: collaboration; tele-presence; visualization; broadband
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cdc2008_091
id	cdc2008_091
authors	Neumann, Oliver
year	2008
title	Digitally Mediated Regional Building Cultures
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 91-98
summary	Designs are complex energy and material systems and products of diverse cultural, economic, and environmental conditions that engage with their extended context. This approach relates architecture to the discourse on complexity. The design research described in this paper introduces an extended definition of ecology that expands the scope of design discourse beyond the environmental performance of materials and types of construction to broader cultural considerations. Parallel to enabling rich formal explorations, digital modeling and fabrication tools provide a basis for engaging with complex ecologies within which design and building exist. Innovative design applications of digital media emphasize interdependencies between new design methods and their particular context in material science, economy, and culture. In British Columbia, influences of fabrication and building technology are evident in the development of a regional cultural identity that is characterized by wood construction. While embracing digital technology as a key to future development and geographic identity, three collaborative digital wood fabrication projects illustrate distinctions between concepts of complexity and responsiveness and their application in design and construction.
email
last changed	2009/01/07 08:05

_id	ddss2008-04
id	ddss2008-04
authors	Osaragi, Toshihiro and Kenichi Ogawa
year	2008
title	Brand Value of Area-Images Extracted from SpatialDistribution of Building Names
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Our area-images are composed of evaluations derived from the various kinds of elements or activities within different regions. In quantitative terms, the extraction of area-images is difficult. In this paper, we focus on a phenomenon in which a part of people’s area-image can be observed in the names of buildings. In the first instance, a model based on the random utility theory is constructed to describe the spatial distribution of building names. Secondly, the proposed model is calibrated using actual data from the city of Tokyo (Setagaya Ward), and effects of such area-elements or activities on area-images are then estimated. Finally, values for the area-images are quantitatively estimated and their spatial distribution is represented on a map.
keywords	Brand-value, Area-image, Building name, Spatial distribution, Logit model
series	DDSS
last changed	2008/09/01 17:06

_id	cdc2008_311
id	cdc2008_311
authors	Papanikolaou, Dimitris
year	2008
title	From Representation of States to Description of Processes
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 311-322
summary	Introduction of digital technologies in architecture has generated a great amount of hesitation and criticism about the role of design and its relation to the artifact. This confusion seems to stem from the dual nature of design as representation of the form and as a description of its production process. Today architects urge to adopt digital tools to explore complex forms often without understanding the complexity of the underlying production techniques. As a consequence, architects have been accused of making designs that they do not know how to build. Why is this happening today? It seems that while technology has progressed, the design strategy has remained the same. This paper will deal with the following question: What matters in design? The paper will reveal fundamental problems, attempt to answer this question, and suggest new directions for design strategies today. The conclusion of this paper is that digital design should also aim to describe process of production rather than solely represent form.
email
last changed	2009/01/07 08:05

_id	acadia08_382
id	acadia08_382
authors	Peters, Brady; Xavier De Kestelier
year	2008
title	Rapid Prototyping and Rapid Manufacturing at Foster + Partners
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 382-389
doi	https://doi.org/10.52842/conf.acadia.2008.382
summary	Over the last 15 years, rapid prototyping has been an integral part of the design process in the car and aerospace industry (Brad Fox 2006). Recently the architecture profession has started to use these techniques in its design process (Greg Corke 2006), and some architecture schools have begun experimenting with these technologies. ¶ Foster + Partners have been one of the first architecture practices to fully integrate rapid prototyping within its design process. The technology was initially seen as a sketch model making tool in the early stages of the design, in particular for projects with complicated geometries. It surpassed this purpose within a year and it is now seen an essential design tool for many projects and in for many project stages. The office’s rapid prototyping department now produces about 3500 models a year. ¶ Besides, or perhaps because of, rapid prototyping, Foster + Partners have started to experiment with rapid manufacturing. This first was done through the design and manufacture of a Christmas tree for the charity organisation Save the Children.
keywords	Complex Geometry; Design; Generative; Process; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 08:00

_id	acadia11_152
id	acadia11_152
authors	Rael, Ronald; San Fratello, Virginia
year	2011
title	Developing Concrete Polymer Building Components for 3D Printing
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 152-157
doi	https://doi.org/10.52842/conf.acadia.2011.152
summary	The creation of building components that can be seen as sustainable, inexpensive, stronger, recyclable, customizable and perhaps even reparable to the environment is an urgent, and critical focus of architectural research. In the U.S. alone, the construction industry produced 143.5 million tons of building-related construction and demolition debris in 2008, and buildings, in their consumption of energy produce more greenhouse gasses than automobiles or industry.Because the inherent nature of 3D printing opens new possibilities for shaping materials, the process will reshape the way we think about architectural building components. Digital materiality, a term coined by Italian and Swiss architects Fabio Gramazio and Matthias Kohler, describes materiality increasingly enriched with digital characteristics where data, material, programming and construction are interwoven (Gramazio and Kohler, 2008). The research aspires towards this classification through the use of parametric modeling tools, analytic software and quantitative and qualitative analysis. Rapid prototyping, which is the automatic construction of physical objects using additive manufacturing technology, typically employs materials intended for the immediate analysis of form, scale, and tactility. Rarely do the materials used in this process have any long-term value, nor does the process - except in rare cases with expensive metal prototyping - have the ability to create actual and sustainable working products. This research intends to alter this state of affairs by developing methods for 3D printing using concrete for the production of long-lasting performance-based components.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 08:00

_id	ddss2008-37
id	ddss2008-37
authors	Rodrigues, Daniel S.; Rui A.R. Ramos and José F.G. Mendes
year	2008
title	Decision support system for university campus qualityof life evaluation based on users’ perceptionA case study applied to the Campus of the University of Minho
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents the work that conduced to the development of an information system to evaluate and monitor university campi quality of life. The system embodies two main functions: to provide information to the community and to support campus planning and management. Using a scenario describing possible actions, some users evaluated how its implementation would interfere with the quality of life on the campus. Results showed that it would produce a global improvement, in comparison to the year of the study.
keywords	University Campus, Quality of Life, Decision Support System
series	DDSS
last changed	2008/09/01 17:06

For more results click below: