Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2008_072
id	ecaade2008_072
authors	Coates, Paul S.; Derix, Christian W.
year	2008
title	Smart Solutions for Spatial Planning
doi	https://doi.org/10.52842/conf.ecaade.2008.231
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 231-238
summary	SSSP is a Government funded knowledge transfer project under the overall umbrella of the UK ‘building sustainable communities’ initiative. The paper describes the innovative techniques being developed by the partners to build urban modelling tools for multiple simulation or regeneration scenarios in the Thames Gateway region of London. This knowledge transfer scheme is between the main partners and the London boroughs of Newham and Tower Hamlets. The main aim is to demonstrate the use of digital data in the development of planning scenarios. The aim is to demonstrate a workflow, which should provide stakeholders with a way of testing regeneration options, which are grounded on ‘real’ data and are capable of providing rapid feedback for policy makers and inhabitants alike.
keywords	GIS: Data Analysis: Urban modelling: Ant Colony Optimisation: Dijkstra shortest path algorithm
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2008_72_session7a_594
id	caadria2008_72_session7a_594
authors	Kosavinta, Satakhun
year	2008
title	Collaborative Financial Feasibility With CAAD For Residential Development
doi	https://doi.org/10.52842/conf.caadria.2008.594
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 594-600
summary	Computer Aided Architectural Design software is a necessary tool for the architectural design of a visible object or model. In residential development, an estimation of time/cost corresponding to the design is needed in order to complete its successful project. But available feasibility supporting tools usually lacks ability to share their information. To solve this limitation, this research proposes a design of Graphic User Interface (GUI) for collaborative financial feasibility through an architectural design process in housing project. The development of the GUI starts from collecting some information and requirement from National Housing Authority of Thailand. A heuristic decision making approach based on financial analysis are then designed for both design processes and feasibility processes of the project. Finally, design of the GUI is an integration of CAAD engines, design standards and financial feasibility analysis. Proposed GUI for collaborative financial feasibility is also tested and verified with some information from sample past projects of the National Housing Authority. From the experimental results, This GUI allows designers to improve the design of the project in real-time by inspecting the result of their design via the part of the architectural design-oriented GUI called myMonitoring and Scratch Pad. Together with planning, collaborative financial feasibility is focusing on the four main financial parameters which illustrated the possible chance of the project: Net Present Value (NPV), Benefit-Cost Ratio (B/C), Internal Rate of Return (IRR), and Payback Period. The core system was developed on Java Technology such as JSP and Swing empowered by 3D game engine. In addition, “Virtools” as an authoring tool was applied to improve interactive 3D virtual environment and explore rapid online system prototyping.
keywords	Collaborative: Financial Feasibility; CAAD; Residential Development; Virtual Reality (VR)
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	asanowicz02_paper_eaea2007
id	asanowicz02_paper_eaea2007
authors	Asanowicz, Aleksander; Katarzyna Asanowicz
year	2008
title	The Dynamic Perception of Digitally Created Abstract Urban Space
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Sigmund Freud in his book has used a City as a Metaphor of human Psyche. According to him City is not only images of the forms given us in the process of perception but all invisible and nowadays not existing forms (buildings) too. This way of representing historical sequences is possible thanks to ability of our mind to parallel consideration of different spatial meanings. Aldo Rossi called it - “analogous City” – a city which includes the existing buildings, buildings which was existed in the same place in the past and imaginary buildings (our visions of future development of the city). As a result – City is a place where real and virtual meet. Aldo Rossi presents an “analogous city” as a mental map which includes real and unreal forms representing, at the same time, remembered and imagined events. He has written: “When we back to the place after long absence we not only recognize it, but at the same time start remembering events which has happened at this place in the past. Peter Eisenman in “The City of Artificial Excavation” has analyzed the city as an archaeologist, who excaved forgotten buildings and showed us unknown connections and meanings.
keywords	city perception, emotions, digital composition
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2008_103
id	sigradi2008_103
authors	Baltazar, Ana Paula; Maria Lucia Malard, Silke Kapp, Pedro Schultz
year	2008
title	From physical models to immersive collaborative environments: testing the best way for homeless people to visualise and negotiate spaces
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper describes an experiment to investigate the best way for lay people to use representation to visualise and negotiate space. It was motivated by our observations in workshops for digital inclusion in the context of a housing project for a homeless association. Computers were used to make it easier for the community to understand and change the spaces in real time. The first workshops proved that our approach was efficient as an exercise but not certainly effective concerning the understanding of spatial qualities. So we have designed an experiment to compare the usability of different media in participatory design processes. For that we have adapted the ‘Usability’ methodology, which is fully described in the paper. We started with three main questions. The first concerned the effectiveness of different media to represent spatial quality; the second concerned the best way for novices to approach space, whether by refurbishing a pre-existing space or by starting from the scratch; and the third concerned the effectiveness of negotiation by means of discourse and by means of or action. We also had two main hypothesis: one coming from research on digital environments and stereo visualisation, indicating that the more people feel immersed in the represented environment the more they are able to correlate it with physical space; and the other coming from our own observations in the participatory design workshops, in which the collective decision-making was manipulated by those people with more advanced communication skills who use their ability in an authoritative way regardless of the relevance of what they have to say. This paper describes the whole experiment, which was an exercise of spatial negotiation in 5 versions. In the first version we provided fixed digital views of a room in plan and axonometry; for another two versions we provided a physical model of the room in 1:10 scale, with some pieces of the existing furniture in different scales. This was done to check if people were just playing with a puzzle or actually grasping the correspondence between representation and the object or the space represented. One version proposes refurbishment and the other starts from the scratch. And the last two versions repeated the same task made with the physical model, but this time using a 3D interactive digital model. People were required not only to organise the furniture in the space but also to build a full scale cardboard structure and organise the real furniture reproducing their proposed model. Their comments on the spaces they had built confronted with what they had imaged when working with the model has enabled us to compare the different models, as also the different ways of negotiating spaces. This paper describes this experiment in detail concluding that 3D digital interactive models are far more effective than physical models and 2D drawings; when negotiation happens by means of action it provides more creative results than when the discoursive practice prevails; people are more creative when they start something from scratch, though they spend more time. The results of this experiment led us to formulate a new hypothesis leading to the development of an immersive collaborative environment using stereoscopy.
keywords	Visualisation, negotiation, immersive environment, digital interfaces, homeless people
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac20076104
id	ijac20076104
authors	Benoudjit, Mohamed Amine; Coates, Paul S.
year	2008
title	Artificial networks for spatial analysis
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 59-78
summary	This paper tests digital representation techniques which can be used by artificial neural networks in a computer-aided design (CAD) environment to analyze and classify architectural spaces. We developed two techniques for encoding volumetric data: vertex representation and feature space representation, as input for artificial neural networks. We tested how two different kinds of artificial neural networks, perceptron networks and self-organizing maps, could recognize given shapes in these representational formats. We have found that a one-layer perceptron can be used to classify shapes even when presented with input vectors composed of real numbers. These spatial representation techniques provide a method for using ANNs for architectural purposes.
series	journal
last changed	2008/06/18 08:12

_id	acadia08_152
id	acadia08_152
authors	Biloria, Nimish
year	2008
title	Morphogenomic Urban and Architectural Systems: An Investigation into Informatics Oriented Evolution of Form: The Case of the A2 Highway
doi	https://doi.org/10.52842/conf.acadia.2008.152
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 152-157
summary	This research paper exemplifies upon a novel information integrated generative design method: Morphogenomics, being experimented with at Hyperbody, TU Delft. Morphogenomics, a relatively new research area, which deals with the intricacies of morphological informatics. This paper furthermore discusses an ongoing Morphogenmoics oriented design-research case: the development of a Distributed Network-city along the A2 highway, Netherlands. The A2 highway, development is a live project seeking urban development on either side of this busy highway. Hyperbody, during the course of this research initiative developed a series of real-time interactive computational tools focusing upon the collaborative contextual generation of a performative urban and architectural morphology for the A2 highway. This research paper elaborates upon these computational techniques based Morphogenomic approach and its resultant outcomes.
keywords	Computation; Evolution; Flocking; Information; Morphogenesis
series	ACADIA
last changed	2022/06/07 07:54

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
doi	https://doi.org/10.52842/conf.caadria.2010.327
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2008_030
id	ecaade2008_030
authors	Donath, Dirk; Lobos, Danny
year	2008
title	Massing Study Support
doi	https://doi.org/10.52842/conf.ecaade.2008.101
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 101-108
summary	Since Hugh Ferris in 1922 started with a series of massing studies the visualization of zoning planning began to be a topic for architects. Setbacks, plot area ratio, maximum building height, and other important attributes must be handled by the architect to fulfill the law, the needs of the clients and his own inspiration. This paper presents the problem of envelope design for high-rise isolated housing buildings, as well as a new Decision Support Systems tool based on the platform of a BIM software, that allows to simulate several options for building envelope according to the parameters required by the city Zoning Planning. These options deliver reliable data and geometry, to be analyzed in real time for the architects, engineers, builders, government and the client in the early stages of the building’s design.
keywords	Constraint Based Design, Parametric Programming, Urban Modeling, Optimization, Architectural Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2008_1_session1a_014
id	caadria2008_1_session1a_014
authors	Fukuda, Tomohiro; Atsuko Kaga, Yosuke Takada
year	2008
title	Development and evaluation of a representation method of 3DCG pre-rendering animation for environmental symbiosis design
doi	https://doi.org/10.52842/conf.caadria.2008.014
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 14-21
summary	As a method of dissemination of environmental symbiosis design towards environmental problem solutions, 3DCG pre-rendering animation (3DCGPRA) which has a high quality of representation and has a powerful appeal, is expected to be particularly effective. After arranging components required in an environmental symbiosis design, the representation targets which needed to be developed were clarified. In addition, representation methods of shade and shadow, grass, human activity, and symbiosis methods etc. were developed. In a real project, a 7’ 3DCGPRA was created applying these new methods, and its validity was evaluated.
keywords	Environmental design; environmental symbiosis design; 3DCG pre-rendering animation; eco-village; natural elements
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2008_070
id	ecaade2008_070
authors	Guéna, François; Untersteller, Louis-Paul
year	2008
title	Computing Different Projections of a Polyhedral Scene from a Single 2D Sketch
doi	https://doi.org/10.52842/conf.ecaade.2008.195
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 195-200
summary	This paper presents the development of a tool which is capable of compute several projections of a polyhedral scene from a single axonometric or perspective projection. This projection is hand-drawn and may be incomplete. This sketch can be rotated with a kind of trackball and the tool computes in real-time new projections. In that way the designer can choose another view from which he is able to control and complete the sketch and carry on designing. So this tool can be useful for exploring architectural forms in the early phases of the design process. Unlike others freehand sketching interfaces, the system does not operate any reconstruction in 3D. Everything is computed in a 2D world.
keywords	Architectural Design, Sketching, Projective Geometry, Duality, 3D Reconstruction
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2008_17_session2a_143
id	caadria2008_17_session2a_143
authors	Kaewlai, Pornpis; Pinyo Jinuntuya, Pizzanu Kanongchaiyos
year	2008
title	Interactive Feasibility-based CAAD System for Infrastructure and Open Space Planning in Housing Project Design
doi	https://doi.org/10.52842/conf.caadria.2008.143
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 143-148
summary	The decision support system developed in this research is aimed to the conceptual scheme of project focusing on infrastructure planning and open space design in the architectural context for housing project. Alternative design sets are provided within the limitations, and possibilities to be further evaluated appropriately. This system helps architects and developers to analyze relationships of physical environment, architectural requirements and the overall of project-related factors with real-time cost estimation. Factors for cost estimation derived from the beginning to the end of project will be manipulated simultaneously. Architects and developers can use this design simulation to address the physical data with real-time cost estimation, provide alternative results, and design evaluation for overall project’s feasibility. The software of our research is not just a tool for design & planning automation in feasibility analysis. It will be an interactive decision support system for both developers and planners aspects. The system was developed by SketchUp Ruby Application Programming Interface. The results will be presented into two ways. Firstly, 2D and 3D modeling will be used for interactive visualization in design and planning of the beginning process. Subsequently, numbers and additional factors in details will be used to show relationship between architectural environment and feasibility-based information to help architects and developers collaboratively analyze the land use planning and open space design for housing project. In evaluation process, the developed software is tested with the project preceding and the future project of Bangkok area under constraints and regulations of Building Control Act of Thailand. In conclusion, this system will make effectiveness in design process and management of the construction knowledge. The decision support systems should be designed to makes explicit use of both planning analysis aspect and knowledge-based decision making.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	kasyanov02_paper_eaea2007
id	kasyanov02_paper_eaea2007
authors	Kasyanov, Nikolai
year	2008
title	Study of Architectural Shape Formation in Comparison with Natural Morphogenesis Using Computer Simulation
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Geometric accuracy of architectural computer models allows to percept and to analyze the three-dimensional spatial compositions using computer images. The concepts and methodology of modern interdisciplinary science, in particular fractal geometry, have already been successfully applied in the various scientific fields, as astronomy, physics, chemistry, biology. Modern ecological paradigm does not separate human life and anthropogenic world from the natural environment considering all as unitary nonlinear ecosystem. The analysis of the architectural shape formation is a part of the study of morphogenesis in such different worlds, as non-living and living nature and man-made forms – real as well as virtual architecture.
keywords	morphogenesis, architectural landscape, computer simulations
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ecaade2008_139
id	ecaade2008_139
authors	Kepczynska-Walczak, Anetta
year	2008
title	Contemporary Renaissance Architect - Yet Architect?
doi	https://doi.org/10.52842/conf.ecaade.2008.445
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 445-450
summary	This paper is a contribution into domain of Generative Design and Digital Aids to Design Creativity. The outcomes of two workshops for the fourth and fifth year students of architecture are presented. The workshops allowed to draw particularly interesting lessons leading, in consequence, to more general reflections on questions such as the limits in design creativity versus unexpected outcomes calculated by a computer, the gap between boundless possibilities offered by digital design tools and real practice in building construction. And finally, how advanced research results can be incorporated in teaching. This is particularly important, as nowadays students, to become successful architects in the future, not only will have to be good in using CAAD software but also in programming and software development.
keywords	Generative Design, Digital Aids to Design Creativity, CAAD Curriculum
series	eCAADe
email
last changed	2022/06/07 07:52

_id	oxman02_theses_eaea2007
id	oxman02_theses_eaea2007
authors	Oxman, Rivka; Rina Kolomisky
year	2008
title	Designing Experience in Virtual Worlds
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	The immense growth in computer and virtual reality technology has resulted in the development of new approaches to the design of virtual environments. Virtual environments related to everyday life are currently being designed and implemented to accommodate diverse functions. These information environments are generally not sufficient to simulate the experience of real life. There is a need to establish new conceptual approaches to enhance the richness of our experience in virtual world.
keywords	virtual environments, psychology - sense of presence - sense of place; scenario-based; media interactivity; methods and techniques of spatial simulation
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ecaade2008_137
id	ecaade2008_137
authors	Palmquist, Erik; Shaw, Jonathan
year	2008
title	Collaborative City Modeling
doi	https://doi.org/10.52842/conf.ecaade.2008.249
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 249-256
summary	This paper presents an approach to creating an online real time rendering environment, upon which a large-scale, urban 3D model can be produced as a collaborative effort between initial content creators and outside parties with an interest in simulation and visualization. In 2007, the City of Atlanta, Georgia organized a taskforce to provide recommendations on the future development and mobility along the city’s signature street, Peachtree Street. To aid in the visualization of this area, datasets were converted into low polygon textured 3D models for the entire study area. This content will serve as the foundation of a collaborative effort to complete a high quality real time environment. The process for this project will be described and the means to extend the boundaries, maintain, and collaborate with this content will be proposed.
keywords	3D model, collaborative design, real time, visualization, training
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cdc2008_213
id	cdc2008_213
authors	Sommer, Bernhard
year	2008
title	Generating topologies: Transformability, real-time, real-world
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 213-220
summary	Customization is a contemporary trend, which should not be ignored by architecture. An increasing demand and decreasing resources will necessitate the reuse and the sharing of space. Transformability will facilitate these tasks. On the basis of a case study, this paper demonstrates the technical feasibility of a continuously transformable structure, which enables the transformation and manipulation not only of shape, but of topological qualities as well. However, this fully and universally transformable architecture itself cannot only be seen in the context of customization, but also as a further development of architecture as a discipline.
email
last changed	2009/01/07 08:05

_id	ecaade2008_116
id	ecaade2008_116
authors	Spaeth, A. Benjamin
year	2008
title	Room Acoustics in the Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.2008.367
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 367-374
summary	The basic principles, methods, and digital tools for the analysis of room acoustics are the topic of this paper. Students have been using these analysis and simulation tools during a seminar at Stuttgart University to systematically investigate acoustical situations. Additionally to lecturing on the underlying physics of room acoustics we were trying to convey the impact of geometry on room acoustics and therefore the impact of room acoustics on shapes in architecture. This paper describes the implementation of a real time simulation module for room acoustics within our Virtual Reality System.
keywords	Room Acoustics, Virtual Reality, Design Tools, Education
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac20076103
id	ijac20076103
authors	Tonn, Christian; Petzold, Frank; Bimber, Oliver; Grundhofer, Anselm; Donath, Dirk
year	2008
title	Spatial Augmented Reality for Architecture Designing and planning with and within existing buildings
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 41-58
summary	At present, more than half of all building activity in the German building sector is undertaken within existing built contexts. The development of a conceptual and technological basis for the digital support of design directly on site, within an existing building context is the focus of the research project "Spatial Augmented Reality for Architecture" (SAR). This paper describes the goals achieved in one aspect of the project: the sampling of colors and materials at a scale of 1:1 using Augmented Reality (AR) technologies. We present initial results from the project; the development of an ad-hoc visualization of interactive data on arbitrary surfaces in real-world indoor environments using a mobile hardware setup. With this, it was possible to project the color and material qualities of a design directly onto almost all surfaces within a geometrically corrected, existing building. Initially, a software prototype "Spatial Augmented Reality for Architecture-Colored Architecture" (SAR-CA) was developed and then assessed based on evaluation results from a user study.
series	journal
last changed	2008/06/18 08:12

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

For more results click below: