Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 490

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2008_018
id	ecaade2008_018
authors	Schindler, Christoph
year	2008
title	ZipShape
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 775-782
doi	https://doi.org/10.52842/conf.ecaade.2008.775
summary	ZipShape is a universal method to fabricate single curved panels from any plain material without molds. The system uses two individually slotted panels that interlock when bent to the predefined curvature. As non-radial curves require individual teeth geometry, the method makes use of automated detailing with corresponding algorithms. ZipShape is a fusion of information processing and material processing based on comparatively simple software technology and standard workshop machinery. With help of case studies, this paper evaluates the method’s claim to be a variable and feasible solution for the realization of non-planar shape.
keywords	ZipShape, Digital fabrication, Cold wood bending
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_033
id	caadria2018_033
authors	Bai, Nan and Huang, Weixin
year	2018
title	Quantitative Analysis on Architects Using Culturomics - Pattern Study of Prizker Winners Based on Google N-gram Data
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 257-266
doi	https://doi.org/10.52842/conf.caadria.2018.2.257
summary	Quantitative studies using the corpus Google Ngram, namely Culturomics, have been analyzing the implicit patterns of culture changes. Being the top-standard prize in the field of Architecture since 1979, the Pritzker Prize has been increasingly diversified in the recent years. This study intends to reveal the implicit pattern of Pritzker Winners using the method of Culturomics, based on the corpus of Google Ngram to reveal the relationship of the sign of their fame and the fact of prize-winning. 48 architects including 32 awarded and 16 promising are analyzed in the printed corpus of English language between 1900 and 2008. Multiple regression models and multiple imputation methods are used during the data processing. Self-Organizing Map is used to define clusters among the awarded and promising architects. Six main clusters are detected, forming a 3×2 network of fame patterns. Most promising architects can be told from the clustering, according to their similarity to the more typical prize winners. The method of Culturomics could expand the sight of architecture study, giving more possibilities to reveal the implicit patterns of the existing empirical world.
keywords	Culturomics; Google Ngram; Pritzker Prize; Fame Pattern; Self-Organizing Map
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2008_115
id	ecaade2008_115
authors	Bernal, Marcelo; Yi-Luen Do, Ellen
year	2008
title	Variation from Repetition
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 791-798
doi	https://doi.org/10.52842/conf.ecaade.2008.791
summary	Making double curvature surfaces in architectural design is nontrivial and presents many challenges. Design and fabrication of these complex shapes requires systematic approaches. Most current design and fabrication processes distribute adaptable patterns over modulated variable surfaces. But to produce variation with this method means many machining hours and a budget that a conventional architectural project cannot afford. An alternative method to achieve such complex shapes would be to overlap identical elements on a grid. This paper presents an approach to fabricate such complex surfaces from the repetition of a series of identical elements.
keywords	Double curvature, adaptability: automation, digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac20076306
id	ijac20076306
authors	Dujovne, David Butelmann; Montoya, Claudio Labarca
year	2008
title	Digital design and manufacture based on Chiloean boats
source	International Journal of Architectural Computing vol. 6 - no. 3, pp. 317-333
summary	This paper proposes a design methodology for the manufacture of complex, double-curved surfaces based on the digital reconstruction of traditional structural and constructive elements of Chiloean boats. It also suggests a beneficial association between digital design and CAD CAM for manufacture using locally crafted construction techniques. The incorporation of innovated contemporary digital design and fabrication tools into traditional construction systems, aims to optimize and perpetuate traditional artisanal craft construction of complex shapes developed in the south of Chile. The importance of this research in budget-restricted economies, lies in the possibility of applying local construction and assembly techniques to new sophisticated designs that may satisfy the country's architectural needs. Scale models are used to record the design process and constructive development while information flow charts document the design methodology for the construction of complex geometries.
series	journal
last changed	2008/10/14 14:00

_id	ddss2008-29
id	ddss2008-29
authors	Emanuel, Leleito; Akira Ohgai Motoya Koga Yoshimizu Gohnai
year	2008
title	Using WebGIS and Videoconferencing to SupportDistributed Concurrent Urban Planning WorkshopsA case supporting a collaborative community "Treasure MapCreation” workshop
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This study focuses on an experimental method that employs the internet, WebGIS and videoconference systems to enable gathering and sharing of information from concurrently hosted multiple distributed participatory planning workshops. The method is expected to contribute to time, effort and economic savings while enabling greater grassroots participation as well as promoting the whole participatory planning process through more efficient information collection, sharing and updating. The authors present as a case study a distributed WS supported by videoconferencing and WebGIS systems reporting on the challenges and the implications for use in supporting participatory planning from the community scale to the larger scale regional planning levels are discussed.
keywords	Citizen Participatory Planning, WebGIS, Videoconferencing, Distributed Workshops
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2008_089
id	sigradi2008_089
authors	Godoi,Giovana; Gabriela Celani
year	2008
title	A study about facades from historical brazilian town using shape grammar
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Shape grammars have been used in architecture for analysis and synthesis - in the first case, mainly for the characterization of styles and in the later for the generation of novel compositions. The present research proposes the use of shape grammars for establishing guidelines for the requalification of historical areas that have lost their original characteristics due to improper renovations. The use of shape grammars proposed here starts with the definition of a set of rules for characterizing the original style of an area. Based on these rules, the main characteristics of the area are confirmed, such as siting, proportions between walls and openings in the façades, overall dimensions constraints, and so on. Next, the rules of the grammar are transformed, to allow the use of contemporary building materials, as well as the incorporation of contemporary living styles in the new design. Rules must take into account two cases: original buildings that have been inadequately transformed, and buildings that have been completely torn down and will replace been completely replaced by new constructions. Both cases need to be harmonious with the remaining original buildings, however without simply copying the existing style. In both cases, rules have been used to establish the guidelines for the renovations, which resulted in modern urban environments that resemble the original historical sites in terms of spatial relations and proportions. They also create an appropriate environment for the observations of the preserved original buildings, which would otherwise look like aliens in a completely transformed neighborhood. The latter case is very common in most Brazilian cities, especially in the case of São Paulo, where houses from the late 1800´s and early 1900´s are flanked by high rise apartment buildings. In order to develop and test the proposed method, a study will be carried out in a small Brazilian town called Monte Alegre do Sul. The town was chosen because its original urban morphology, developed in the XIXth century, is still relatively well preserved, although part of the original façades have been transformed. The objective of the research is to develop a shape grammar to set guidelines for the re-adaptation of the already renovated façades and reconstruction of other ones in Monte Alegre do Sul.
keywords	Shape grammar, generative design systems
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2008_079
id	ecaade2008_079
authors	Hemmerling, Marco; Knaack, Ulrich; Schulz, Jens-Uwe
year	2008
title	Complexity in Digital Architectural Design
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 85-90
doi	https://doi.org/10.52842/conf.ecaade.2008.085
summary	The association of complexity and geometry was the starting point for an academic project at the chair of Computer Aided Design in Detmold. The students were asked to analyze a complex structure - taken from nature, art, technology or society - regarding the underlying geometrical rules and principles. The translation of these abstract geometric principles (logarithmic spiral, polyhedron, rotational solids, mesh-work, double helix…) into a three-dimensional structure was then realized in Rhinoceros. The 3D-modeling was followed by a transformation- and optimization-process of the initial shape by using the evolutionary principles of mutation and selection. The set-up for these variations followed predefined rules and principles for the manipulation of the original structure.
keywords	Geometry, Complexity, Computer Aided Design, Architecture
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2008_79_session7b_647
id	caadria2008_79_session7b_647
authors	Huy, Nguyen Quang
year	2008
title	A Simulation Image Of Urban Heat On Solar Absorption Cofficient by AutoCAD and GAUSS Matrix Blur Method
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 647-653
doi	https://doi.org/10.52842/conf.caadria.2008.647
summary	Many professional software simulated urban heat. However, the simply software for student or beginner of urban planning is very rarely in practice. From viewpoint of an architectural student, this paper is an attempt to a simple method to simulation image of urban heat on solar absorption coefficient by AutoCAD and Gauss matrix blur method, which is simple and suitable with architectural student and beginner of urban planning design
keywords	Solar radiation, absorption coefficient of material surface, CAD layer, Gauss blur method
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2008_48_session5a_391
id	caadria2008_48_session5a_391
authors	Kacher, S.; G. Halin
year	2008
title	An analyse of experiment results to improve an image indexation method: Application to the design process
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 391-398
doi	https://doi.org/10.52842/conf.caadria.2008.391
summary	In our research work we proposed a method to construct an image data base from which designers can find solutions for their design problem. In our approach, an image is not only a media representing existing objects or existing scenes, but it is a support which allow the designer to advance in solving his problem. In this paper we tackle the particular question of the analyses of the results obtained thanks to an experiment which aims to validate a method to index and retrieve images. The objective of this experiment is to evaluate the real contribution of the images retrieved by our system to the designer when he looks for solutions to a design problem. By the analyse of the indexation terms we aim to evaluate the real help that this reference image database can bring to the designer during his creation work.
keywords	Image database, indexing process, design process, thesaurus describers
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2008_32_session4a_263
id	caadria2008_32_session4a_263
authors	Kan, Jeff W.T.; John S Gero
year	2008
title	Do computer mediated tools affect team design creativity?
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 263-270
doi	https://doi.org/10.52842/conf.caadria.2008.263
summary	This paper presents the results of a quantitative analysis to measure the development of creative design ideas in design protocols. It presents a working definition of design creativity used in the analysis followed by the method of study. Five sets of video and audio data were collected from experiments that involved two designers designing similar tasks in three different settings: face-to-face, an Internet GroupBoard, and a 3D virtual world. The most creative pair was selected for qualitative and quantitative analysis. Our result shows that designers developed more design ideas in the face-to-face setting than in the 3D virtual world settings.
keywords	Creativity, protocol analysis, collaborations, virtual world
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2008_081
id	sigradi2008_081
authors	Kirschner, Ursula
year	2008
title	Study of digital morphing tools during the design process - Application of freeware software and of tools in commercial products as well as their integration in AutoCAD
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This research work examines methods of experimental designing with CAAD in a CAD laboratory with architecture students as the testing persons. Thereby the main focus is on the early phase of finding forms, in which different techniques with digital media are tried out in the didactic architectural design lessons. In these work have been traced the influences of the media employed on the design processes and combined the approaches of current CAAD research with aspects from classic design theory. For mathematical rules of proportion, atmospheric influence factors and analogy concepts in architecture, I have developed design methods which have been applied and verified in several series of seminars. (Kirschner, U.: 2000, Thesis, a CAAD supported architectural design teaching, Hamburg, school of arts). Previous experimental exercises showed that morphological sequences of modeling are effective sources for playful designing processes. In the current work these approaches are enhanced and supplemented by different morphological architectural concepts for creating shapes. For this purpose 2D based software like Morphit, Winmorph and other freeware were used. Whereas in the further development of this design technique we used 3D freeware morphing programs like zhu3D or Blender. The resulting morphological shapes were imported in CAD and refined. Ideally the morphing tool is integrated in the modeling environment of the standard software AutoCAD. A digital city model is the starting basis of the design process to guarantee the reference to the reality. The applied design didactic is predicated on the theories of Bernhard Hoesli. The act of designing viewed as „waiting for a good idea“ is, according to him, unteachable; students should, in contrast, learn to judge the „the force of an idea“. On the subject of morphology a form-generating method in the pre-design phase has been tested. Starting from urban-planning lines on an area map, two simple geometric initial images were produced which were merged by means of morphing software. Selected images from this film sequence were extruded with CAAD to produce solid models as sectional drawings. The high motivation of the students and the quality of the design results produced with these simple morphing techniques were the reason for the integration of the artistic and scientific software into the creative shape modeling process with the computer. The students learned in addition to the „bottom up “and „ top down” new design methods. In the presentation the properties and benefits of the morphing tools are presented in tables and are analyzed with regard to the architectural shape generating in an urban context. A catalogue of criteria with the following topics was developed: user friendliness, the ability of integrating the tools or as the case may be the import of data into a CAD environment, the artistic aspects in terms of the flexibility of shape generating as well as the evaluation of the aesthetic consideration of shapes.
keywords	Architectural design, freeware morphing software, AutoCAD
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia08_000
id	acadia08_000
authors	Kudless, Andrew; Neri Oxman, and Marc Swackhamer, editors
year	2008
title	Silicon + Skin: Biological Processes and Computation
source	Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008
doi	https://doi.org/10.52842/conf.acadia.2008
summary	Biological processes, computing and design make an inconvenient mix, a mix that challenges us to broaden our academic horizons at a time when we are thirsty for creative solutions to unprecedented global problems and opportunities. More than a mixture, it is about forming rhizomatic connections between these three systems of knowledge, brought together through design, mediated by computing and inspired by the wisdom ensconced in biological processes that have evolved over billions of years. The last few years together represent a watershed time for ACADIA. Themes ranging from digital fabrication, smart environments, expanding bodies, and synthetic landscapes have been taken up in the recent past. This year’s conference marks yet another year of pushing the envelope with a subject matter that is still on the frontiers of the emerging (and emergent) knowledge. ACADIA is proud to play a vanguard role in leading and facilitating this discourse. To this end, the outstanding team of conference chairs has put together a unique and exciting program. I would like to thank the chairs for their boldness, hard work and resourcefulness in bringing together a remarkable array of people, things, systems, and topics to the table. All evidence points to the emergence of ACADIA as THE forum for vanguard explorers from multiple disciplines. I hope that the seeds of discourses sown at this remarkable conference at the University of Minnesota will grow into significant movements in the future. Thank you!
series	ACADIA
last changed	2022/06/07 07:49

_id	sigradi2008_087
id	sigradi2008_087
authors	Lautenschlaeger, Graziele; Anja Pratschke
year	2008
title	Electronic Art and Second Order Cybernetic: From Art in Process to Process in Art.
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The goal of the paper presented below is to discuss partial results of a research which has been financed by the state sponsored agency FAPESP since 2007. Inserted in the research line Design Process, it aims to analyse connections between design process in electronic art and architecture, concerning the creation of mixed media spatialities, as well as present how each field can get the benefits from this analyses. Based on Grounded Theory methodology, a method of qualitative research which aims to understand “reality” from the meanings attributed by people for their experiences, the research has been started collecting data from bibliographical references, interviews with media artists, theoreticians and curators of electronic art and visits to media labs. Interviews and visits of media centers were taken in Europe while the researcher was as an exchange student in the Interface Culture Department in Kunstuniversität Linz, from March to September of 2008. By crossing data collected from the interviews and visits, with the cybernetic social system theory by Niklas Luhmann, and the discussion of an example of mixed media spatiality creation in the art field, this paper analyses how creative processes in digital era depends on different interdisciplinary relationships and how collaborative approaches are needed nowadays in the arts and architectural areas, seeing that artworks are always being influenced by their respective specific “mediality”. The aim of this paper is to discuss the relevance of the use of the cybernetic theory in digital culture, when concepts like participation, interaction and communication are some of the keywords, towards a “collective and distributed authorship”, and their reflects in the contemporary spatiality. The special interest in the comparison of art experience and second order cybernetics as a reference to architecture field is one of the findings of the paper. And, concerning the practical implication, due to cybernetics’ constant questioning of viability, adaptability and recursion, it should be able to point some ways to architects and artists´ works, especially if we consider that they never work in “ideal” conditions.
keywords	Electronic art. Design process. Second order Cybernetic. Niklas Luhmann.
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	cdc2008_221
id	cdc2008_221
authors	Lobel, Josh
year	2008
title	The representation of post design(v.) design(n.) information
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 221-228
summary	Attempts to address interoperability issues in digital design information have become stilted. A lack of any real success is more indicative of the questions asked rather than the solutions proposed. If design information is the progenitor of design representation, and representation is a method by which to encode, store, and distribute design information, then the issues associated with digital design information can be seen as special cases of the general the problems associated with communication. Considering a representation by asking: ‘What is the information that needs to be communicated?’ and, ‘With whom is this information being communicated?’ may provide a better perspective from which to assess specific technological problems such as software interoperability. The goal of this paper is a call to attention – an exercise in critical thought and a provocation. Can re-conceptualizing the problems with the representation and interoperability of digital design information as generic problems of communication offer insight on novel solutions? A brief overview of the challenges posed to interoperability is presented along with current and past efforts to address this issue. An alternative methodology for the communication of design information via process rather than state descriptions is proposed, followed by a summary conclusion.
email
last changed	2009/01/07 08:05

_id	b678
id	b678
authors	Loemker, Thorsten Michael
year	2008
title	Designing with machines
source	Proceedings of the Dresden International Symposium of Architecture 2005, Technische Universitaet Dresden, P. 225-229
summary	In 1845 Edgar Allan Poe wrote the poem “The Raven”. An act full of poetry, love, passion, mourning, melancholia and death. In his essay “The Theory of Composition” which was published in 1846 Poe proved that the poem is based on an accurate mathematical description. Not only in literature are structures present that are based on mathematics. In the work of famous musicians, artists or architects like Bach, Escher or Palladio it is evident that the beauty and clarity of their work as well as its traceability has often been reached through the use of intrinsic mathematic coherences. If suchlike structures could be described within architecture, their mathematical abstraction could supplement “The Theory of Composition” of a building. This research focuses on a basic approach to describe principles in architectural layout planning in the form of mathematical rules that will be executed by the use of a computer. Provided that “design” is in principle a combinatorial problem, i.e. a constraint-based search for an overall optimal solution of a design problem, an exemplary method will be described to solve those problems. Mathematical and syntactical difficulties that arise from the attempt to extract rules that relate to the process of building design will be pointed out. As a consequence for teachings it will be demonstrated which competences are needed in order to aid designing with machines.
series	other
type	normal paper
email
last changed	2008/10/13 14:20

For more results click below: