Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 480

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-35
id	ddss2008-35
authors	Neema, M.N. and A. Ohgai
year	2008
title	A GA-based Multi-Objective Optimization Model for Location Planning of Urban Parks and Open Spaces A Case Study on Dhaka City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper, we present a new multi-objective location model for urban parks and open spaces (POSs) planning. We developed a Genetic Algorithm (GA) based multi-objective optimization model (GAMOOM) to derive optimum locations of POSs by considering four incommensurable objectives with the provision of POSs near: 1) densely populated areas, 2) air polluted areas, 3) noisy areas, and 4) areas without open spaces. The success of the model is presented through its application as a case study on Dhaka City. Obtained results indicate that the model can successfully provide optimum location of required POSs. The findings from this study also signify that optimum location of POSs obtained by utilizing only the second objective is substantially different than that of others. Moreover, there is also difference in optimum location of POSs by taking into account only the third objective when compared with others. Therefore, considering single objective cannot give optimum results for good POSs planning. So, it is verified that POSs should be planned by optimizing multiple objectives instead of single objective. The outcome of this multi-objective GAMOOM model does have an implication on how POSs should be designed and managed by the planning authority for not only sustainable environment but also better quality of life in a city.
keywords	Genetic Algorithm (GA), Multi-Objective Optimization, Parks and Open Space (POS)
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_346
id	acadia08_346
authors	Von Buelow, Peter
year	2008
title	Breeding Topology: Special Considerations For Generative Topology Exploration Using Evolutionary Computation
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 346-353
doi	https://doi.org/10.52842/conf.acadia.2008.346
summary	Topology optimization of engineering structures has long been a topic of research scrutiny. Many methods have been successfully developed for the determination of continuum structures. Some of these techniques, for example the homogenous method, have also been adapted for use with discrete structural frames or trusses. Most commonly the topology optimization of truss structures is carried out with the aid of a ground structure, a simple raster that describes potential joint locations. Although this simplifies the computation, it greatly limits the range of potential solutions that fit the gridded raster. Additionally, when using Evolutionary Computation (EC) methods, the level of computational intensity increases exponentially with the size of the ground structure making anything above a very modest level of complexity impractical to process. ¶ This paper demonstrates several practical techniques that can be used with EC, and more specifically Genetic Algorithms, when applied to topology exploration of discrete structures. First a method of chromosome coding that avoids the use of ground structures is shown. Then specific genetic recombination techniques are illustrated that are well suited for breeding different topologies. The combined techniques are demonstrated in a topology design problem. The paper concludes with a discussion of advantages of EC over traditional optimization methods in the area of overall form design.
keywords	Algorithm; Evolution; Generative; Genetic; Topology
series	ACADIA
last changed	2022/06/07 07:58

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	acadia08_142
id	acadia08_142
authors	Sprecher, Aaron; Paul Kalnitz
year	2008
title	Degrees and Switches
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 142-151
doi	https://doi.org/10.52842/conf.acadia.2008.142
summary	In recent years, evolutionary biology has been the focus of post-Darwinist theories superseding the mere notion of variation with a concept called evolutionary development. The theory of evolutionary development, commonly referred to as evo-devo, follows a series of observations on the nature of organic developments and natural morphologies. Its main contribution rests on an evolutionary model that considers the similarities of genetic material forming organisms and their differences in morphological development due to switching mechanisms between the assigned genes. As observed by the American biologist Sean Carroll, evolution follows regulatory sequences of selector genes that are similar and can be found across various species of insects, plants and animals. ¶ This observation represents a counter-proposal to the old-modern evolutionary theories that looked at processes of adaptation as a function of the emergence of new genes. Evo-devo, on the contrary, recognizes that morphological differences are triggered by recombinatory switches that re-arrange genes in manifold ways to produce numerous characteristics of adaptation. ¶ From a design point of view, evo-devo has tremendous implications because it suggests that generative design protocols may induce sets of similar operations, yet stimulate a wide range of morphologies according to their sequential arrangements and activities. These generative design strategies include, among others, computational methods such as structural shape annealing and object-oriented analysis and design. While these methods are now integrating computing design practices, it is here proposed to review these two computational design methods in the context of three research projects.
keywords	Algorithm; Evolution; Genetic; Object-Oriented; Stochastic
series	ACADIA
last changed	2022/06/07 07:56

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia08_238
id	acadia08_238
authors	Besserud, Keith; Joshua Cotten
year	2008
title	Architectural Genomics
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 238-245
doi	https://doi.org/10.52842/conf.acadia.2008.238
summary	This paper provides an introduction to the concept of genetic algorithms and a sampling of how they are being explored as an optimization strategy for some of the building projects in the BlackBox studio at Skidmore, Owings, and Merrill.
keywords	Algorithm; Environment; Evolution; Genetic; Simulation
series	ACADIA
last changed	2022/06/07 07:52

_id	ecaade2008_123
id	ecaade2008_123
authors	Cenani, Sehnaz; Ça_da_, Gülen
year	2008
title	Agent-Based System for Modeling User Behavior in Shopping Malls
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 635-642
doi	https://doi.org/10.52842/conf.ecaade.2008.635
summary	Agent-based systems are being used as decision support systems for solving architectural design problems. Usually in design phase, user behavior is ignored by the designers. Therefore, after the construction, the users face difficulties in emergency situations and in daily usage. As a result, buildings become insufficient to respond to users’ needs and design goals of the building itself. Before construction, ability of testing the interactions between the building and its users is particularly important to solve the problems in early phases of the design. Hence, to design a building that functions better in certain situations and time loss decreases in the design process. For these reasons, the aim of this study is to develop a model to simulate users in shopping malls.
keywords	User behavior, decision support systems, agent-based systems, simulation, shopping malls
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia08_126
id	acadia08_126
authors	Cook+Fox Architects
year	2008
title	The Generation of a Smart Cloud
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 126-133
doi	https://doi.org/10.52842/conf.acadia.2008.126
summary	This paper presents the process by which Cook+Fox Architects responded to a design challenge that was part metaphorical and part practical. The project involved providing an environmental response to the natural world existing almost 800 feet above the ground, on the second-highest occupiable floor of New York City’s second-tallest building. Environmentally-responsive features at the Bank of America Tower at One Bryant Park are expected to make it the first LEED-Platinum high-rise in the world. The fiftieth floor was conceived as a headquarters for the fashion designer Elie Tahari, the south facing portion of the floorplate was to house a highly adaptable showroom that needed to be adaptable to complement and enhance each season’s particular aesthetics. Additionally, the ceiling in the showroom space needed to allow for optimized height in an environment where structural, mechanical, electrical and sprinkler systems were all designed to be concealed. A combination of numerous computer-aided design scripts took into account various input variables and finally led to the generation of a Smart Cloud.
keywords	Analysis; Behavior; Generative; Optimization; Performance
series	ACADIA
last changed	2022/06/07 07:56

_id	ecaade2008_073
id	ecaade2008_073
authors	Dalla Vecchia, Luisa; da Silva, Adriane; Pereira , Alice
year	2008
title	Teaching/Learning Architectural Design Based on a Virtual Learning Environment
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 801-808
doi	https://doi.org/10.52842/conf.ecaade.2008.801
summary	This paper describes an experiment in which a virtual learning environment was used in the context of an architectural design course. The objective was to evaluate the capability of the learning environment used to support the interactions needed, between teacher-student and between students, for the establishment of a process of discussion and development of architectural design. Some limitations imposed either by the virtual learning environment or by the context of the experiment itself were identified and also positive points, such as the possibility to register the whole design process. All this data subside studies about the process of teaching/learning architectural design validating this experiment and allowing the promotion of new experiments in the different stages of this academic process.
keywords	architectural design, technology in education, virtual learning environment
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia08_082
id	acadia08_082
authors	Del Campo, Matias; Sandra Manninger
year	2008
title	Speculations on Tissue Engineering and Architecture
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 82-87
doi	https://doi.org/10.52842/conf.acadia.2008.082
summary	The main aim of this paper is to speculate on opportunities inherent in the field of tissue engineering, for possible applications in the discipline of architecture. Engineered solutions based on the discoveries within the discipline of Tissue engineering can yield novel building materials and construction methods. These entire conjectures mean a different approach to the trajectories of architectural production, abandoning mechanical solutions for architecture problems in favor of biological, organ driven architectonic conditions.
keywords	Algorithm; Construction; Digital Fabrication; Material; Topology
series	ACADIA
last changed	2022/06/07 07:55

_id	732b
id	732b
authors	Dimitris Papanikolaou
year	2008
title	From Representation of States to Description of Processes
source	Proceedings of 1st International Conference: Critical Digital, Cambridge, MA: Harvard University, 2008: 311-318
summary	Introduction of digital technologies in architecture has generated a great amount of hesitation and criticism about the role of design and its relation to the artifact. This confusion seems to stem from the dual nature of design as representation of the form and as a description of its production process. Today architects urge to adopt digital tools to explore complex forms often without understanding the complexity of the underlying production techniques. As a consequence, architects have been accused of making designs that they do not know how to build. Why is this happening today? It seems that while technology has progressed, the design strategy has remained the same. This paper will deal with the following question: What matters in design? The paper will reveal fundamental problems, attempt to answer this question, and suggest new directions for design strategies today. The conclusion of this paper is that digital design should also aim to describe process of production rather than solely represent form.
keywords	Description, Artifact, Digital, Process, Assembly, Value Chain
series	other
type	normal paper
email
last changed	2008/06/16 21:08

_id	sigradi2008_012
id	sigradi2008_012
authors	Dokonal, Wolfgang
year	2008
title	What is the state of digital architectural design?
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	What is the state of digital architectural design? The ubiquity of the computer in architecture can be seen in the many computer based presentations from famous architectural practices. BIM (Building Information Modelling) is the key word and we can see implementations in very ambitious projects all over the world. Glossy magazines show the results of this kind of architecture and predict that this is the future of our profession. But when we go out into the “small world” (in Europe) and talk with architects in small firms, there is a very different reality – at least at the moment. Although they all agree that the computer is crucial for their work, it is a love/hate relationship for many them. Most still use the computer purely as a drafting device and AutoCAD is still the dominant tool. Although many of them agree with the statement that you can use the computer for design, only a minority really use the computer as a design tool in the early design stages. To find out more about the reality of the use of computers in design in “small town Europe” we have been undertaking two different kinds of research over the past 4 years. The first one is an educational experiment using first year’s students to find out about the different qualities of designing with and without the computer. The results have been presented at previous conferences and, since we are doing a last run of these experiments this year, we will update and finalise our findings in this paper. To make it comparable to previous years, we use largely the same settings using the same type of student (first year) and the same project/site. We will also be comparing the results for students designing ‘freestyle’ ie in the way that they want against the previous years controlled groups. The second strand of research we have followed is a survey amongst practitioners and some of the above statements came out of this survey. We did this survey using a web questionnaire and focused on a particular region of Europe. Although the numbers of participants for this survey were quite satisfying we are re-running the survey in a different region and country to see whether there are significant differences. The results of our research and our experience as teachers and architects leads us to the main question of how we can give recommendations on how to teach design the new generation of architects. In many aspects most of the teaching that is done in our faculties is still strictly divided into teaching design and teaching computer skills. The crucial question for architectural education are the implications of the ubiquity of the computer will have especially in the field of design. We will try to give some suggestions for these effects this could have on our teaching. In the long run, this is the only way to avoid some of the pitfalls and bring the benefits of computers in design to our small architectural firms. The paper will present a summary of the results of our research and try to propose an answer to the question: “What is the state of digital design in small town Europe?”
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2008_030
id	ecaade2008_030
authors	Donath, Dirk; Lobos, Danny
year	2008
title	Massing Study Support
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 101-108
doi	https://doi.org/10.52842/conf.ecaade.2008.101
summary	Since Hugh Ferris in 1922 started with a series of massing studies the visualization of zoning planning began to be a topic for architects. Setbacks, plot area ratio, maximum building height, and other important attributes must be handled by the architect to fulfill the law, the needs of the clients and his own inspiration. This paper presents the problem of envelope design for high-rise isolated housing buildings, as well as a new Decision Support Systems tool based on the platform of a BIM software, that allows to simulate several options for building envelope according to the parameters required by the city Zoning Planning. These options deliver reliable data and geometry, to be analyzed in real time for the architects, engineers, builders, government and the client in the early stages of the building’s design.
keywords	Constraint Based Design, Parametric Programming, Urban Modeling, Optimization, Architectural Design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
doi	https://doi.org/10.52842/conf.acadia.2008.072
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	sigradi2008_089
id	sigradi2008_089
authors	Godoi,Giovana; Gabriela Celani
year	2008
title	A study about facades from historical brazilian town using shape grammar
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Shape grammars have been used in architecture for analysis and synthesis - in the first case, mainly for the characterization of styles and in the later for the generation of novel compositions. The present research proposes the use of shape grammars for establishing guidelines for the requalification of historical areas that have lost their original characteristics due to improper renovations. The use of shape grammars proposed here starts with the definition of a set of rules for characterizing the original style of an area. Based on these rules, the main characteristics of the area are confirmed, such as siting, proportions between walls and openings in the façades, overall dimensions constraints, and so on. Next, the rules of the grammar are transformed, to allow the use of contemporary building materials, as well as the incorporation of contemporary living styles in the new design. Rules must take into account two cases: original buildings that have been inadequately transformed, and buildings that have been completely torn down and will replace been completely replaced by new constructions. Both cases need to be harmonious with the remaining original buildings, however without simply copying the existing style. In both cases, rules have been used to establish the guidelines for the renovations, which resulted in modern urban environments that resemble the original historical sites in terms of spatial relations and proportions. They also create an appropriate environment for the observations of the preserved original buildings, which would otherwise look like aliens in a completely transformed neighborhood. The latter case is very common in most Brazilian cities, especially in the case of São Paulo, where houses from the late 1800´s and early 1900´s are flanked by high rise apartment buildings. In order to develop and test the proposed method, a study will be carried out in a small Brazilian town called Monte Alegre do Sul. The town was chosen because its original urban morphology, developed in the XIXth century, is still relatively well preserved, although part of the original façades have been transformed. The objective of the research is to develop a shape grammar to set guidelines for the re-adaptation of the already renovated façades and reconstruction of other ones in Monte Alegre do Sul.
keywords	Shape grammar, generative design systems
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia08_316
id	acadia08_316
authors	Greenberg, Evan
year	2008
title	Observation, Analysis, and Computation of Branching Patterns in Natural Systems
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 316-323
doi	https://doi.org/10.52842/conf.acadia.2008.316
summary	Branching occurs in natural systems for functional reasons. However, the branching logic for each specific system is quite different due to environmental and mathematical factors. In the computation of branching systems, these mathematical factors can be incorporated quite easily into the coding of each system. However, it is the environmental components that must be given further consideration in the simulation of these natural systems. Through the engine of genetic algorithms based on evolutionary developmental theory, the specific logics observed and analyzed in branching patterns of river systems, trees, and insect tracheae can be simulated and optimized in a digital environment.
keywords	Algorithm; Branching; Emergence; Genetic; Simulation
series	ACADIA
last changed	2022/06/07 07:51

For more results click below: