Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2008_69_session7a_572
id	caadria2008_69_session7a_572
authors	Lertlakkhanakul, Jumphon; Seoyoung Lee, Jinwon Choi
year	2008
title	A Study of The Effects of Placeness on Collaborative Virtual Workplace
doi	https://doi.org/10.52842/conf.caadria.2008.572
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 572-578
summary	So far, there is no empirical study on how ‘placeness’ can affect virtual workplace model. This problem has continuously been overlooked. The research objectives are to verify the effectiveness of ‘workplace metaphor’ and to find out factors that constitute ‘placeness’, the properties of being a place, in collaborative virtual workplace. An experiment was conducted to test the framework. At the end, different virtual workplace settings can result in dissimilar user behavior in terms of teamwork and attitude toward the workplace as disparate settings imply different requirements on function, organizational culture, and social meaning. In conclusion, if architectural elements are carefully applied to the virtual office, it cans strengthen teamwork and enhances social interaction.
keywords	Collaborative virtual workplace; collaborative virtual environments; office ecology; place metaphor; socio-spatial behavior
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2008_199
id	sigradi2008_199
authors	Castañe, Dora
year	2008
title	Rosario, views on the integral revitalization of a cultural heritage [Rosario, Miradas sobre la Revitalización Integral de un Patrimonio Cultural]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This work shows the study of the methods and techniques for the development of a virtual vision VRML 3D included in an "Digitally-integrated knowledge base" with interactive interphases of a significantly revitalized fragment of a central area of the city of Rosario, Province of Santa Fé, Argentina, that includes an emblematic heritage for the Argentineans: the National Monument to the Flag. Digital models that partly allow the development of a hypothesis of integration between the digitized information and information technology—new digital proximity— to the effects of being able to investigate the generation of multimedia database that includes three-dimensional and dynamic models of the mentioned type, in this case, urban, architectonic, and cultural heritage. Different views and research on heritage have been developing. Nevertheless, the use of these new 3D non-immersive technologies and inter-phases are opening a new field of vision and understanding of the subject.
keywords	Heritage, Urban-architectural planning, virtual reality
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	cdc2008_017
id	cdc2008_017
authors	Holzer, Dominik
year	2008
title	Embracing the Post-digital
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 17-22
summary	This paper discusses ways for designers to reconnect their design methodologies with the process of making. The paper takes a critical standpoint on the way architects have integrated digital tools and computational processes in their design over the past three to four decades. By scrutinising the support designers can derive from their virtual design-space it is debated in how far this may be complemented by sensory information-feedback from the physical design-space. A studio-based design project is used to illustrate how students have approached this issue to address aspects of building performance in a post-digital way. Moving between digital and physical models without difficulty, the students were able to study the effects geometrical changes on sustainability-performance in real time.
email
last changed	2009/01/07 08:05

_id	ecaade2008_084
id	ecaade2008_084
authors	Alaçam Aslan, Sema; Çagdas, Gülen
year	2008
title	An Interface Proposal for Collaborative Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.2008.319
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 319-324
summary	The aim of this paper is to explore how new technological opportunities affect approaches of designers during collaborative architectural design process. Which factors affect the communication and the quality of interaction? The study is based on two phases: the data input by the designer via devices to the computer environment and the transformation of data into design product in the software by scripting addition. Input devices that are used are 3D mouse, graphic tablet as a tangible interface and implementation of second mouse besides a standard mouse and keyboard. The potential usage of these interfaces in collaborative architectural design process is discussed and proposals are developed in 3ds max scripting environment.
keywords	Collaborative design, human-computer interaction, user participation in design
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2008_59_session6a_487
id	caadria2008_59_session6a_487
authors	Chevrier, C.; J.P. Perrin
year	2008
title	Interactive parametric modelling: POG a tool the cultural heritage monument 3D reconstruction
doi	https://doi.org/10.52842/conf.caadria.2008.487
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 487-493
summary	Historic monument and archaeological site 3D reconstruction is nowadays often required for many applications (scientific and architectural studies, virtual visits for a better understanding of the monument, etc). This task is very time-consuming. Automating the modelling of the most common components could ease this 3D work and produce accurate, consistent and re-usable models. Based upon compound rules of architectural elements but also upon various other data sources such as photographs and 3D laser scans, we have conceived and developed an interactive tool for virtual 3D reconstruction of heritage monuments. It allows a quick modelling and accurate adjustments to the measured data. This tool could be a great help for architects and archaeologists. Research first has began with the study of classical architecture, and has gone on with other architectural styles. Architectural elements are described with parametric data, then generated by our tool. Our main application context was the town of Nancy in France where there are lots of classical architecture buildings which allow us to test our tool. It will be further extended to be applied to other architectural styles and will be combined with photogrammetry methods.
keywords	parametric modelling, cultural heritage, 3D model
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ddss2008-29
id	ddss2008-29
authors	Emanuel, Leleito; Akira Ohgai Motoya Koga Yoshimizu Gohnai
year	2008
title	Using WebGIS and Videoconferencing to SupportDistributed Concurrent Urban Planning WorkshopsA case supporting a collaborative community "Treasure MapCreation” workshop
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This study focuses on an experimental method that employs the internet, WebGIS and videoconference systems to enable gathering and sharing of information from concurrently hosted multiple distributed participatory planning workshops. The method is expected to contribute to time, effort and economic savings while enabling greater grassroots participation as well as promoting the whole participatory planning process through more efficient information collection, sharing and updating. The authors present as a case study a distributed WS supported by videoconferencing and WebGIS systems reporting on the challenges and the implications for use in supporting participatory planning from the community scale to the larger scale regional planning levels are discussed.
keywords	Citizen Participatory Planning, WebGIS, Videoconferencing, Distributed Workshops
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_26_session3b_213
id	caadria2008_26_session3b_213
authors	Figen Gül, Leman
year	2008
title	Affordances of Virtual environments Do design media change the interaction with the design representation?
doi	https://doi.org/10.52842/conf.caadria.2008.213
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 213-220
summary	The paper focuses on characterising design environments and on identifying design behaviour in different collaborative virtual environments and discusses the behaviour change based on the affordances theory. In this paper, we present two designers collaborating over three different design environments and report a comparison of those environments with face-to-face (FTF) sketching, using protocol analysis. The analysis of the protocol shows that different virtual environments provide different affordances.
keywords	Affordances, collaborative virtual environments, design collaboration, protocol analysis
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2008_184
id	ecaade2008_184
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Fritz, Oliver; Rüdenauer, Kai; Lemmerzahl, Steffen
year	2008
title	Form Follows Structure?
doi	https://doi.org/10.52842/conf.ecaade.2008.451
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 451-458
summary	This paper can be viewed as the continued development of a research project presented at last year’s eCAADe. The project focused on the potential and possibilities of cooperation among architects, investors with concrete building projects, and researchers at the university level working on generative design and parametric construction. After having spent several years of research on design techniques in a purely academic setting at the university we see, contrary to our fears, that reality and the integration of concrete factors such as budget, time management, etc. does not diminish but rather improves the quality of our work. This work is not primarily concerned with the development of a new architectural language but the intelligent use of modern computer technology based on digitized planning processes defined as ‘complex building design’. Designs developed in this manner can be distinguished by certain characteristics, the evaluation of which is a point critically discussed in the following paper.
keywords	Generative Design, Collaborative Design, Parametric Design, User Participation in Design, Case Study, Strategic Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2008_33_session4a_271
id	caadria2008_33_session4a_271
authors	Fukuda, Tomohiro; Atsuko Kaga, Takanori Terashima
year	2008
title	Citizen participatory design method using VR and A Blog
doi	https://doi.org/10.52842/conf.caadria.2008.271
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 271-277
summary	This research concerned the establishment of a citizen participatory design method using VR and CGM. For this, problems in the citizen participatory design are addressed, and the continuous study method using VR and a blog is shown. Then, evaluation is conducted by considering an actual design project as a case study. Furthermore, VR functions needed through the case study are developed. Using this method, a small patio on which parasols were permanently and lawfully set up on a road lot was completed.
keywords	Citizen participatory design; sustainable community design; design method; Virtual Reality; blog
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss2008-11
id	ddss2008-11
authors	Gohnai, Y.; A. Ohgai and K. Watanabe
year	2008
title	A simulation model development of firefightingactivity by community residents against coseismic firespread using multi-agent systemAs a support tool for community-based disaster preventionplanning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper attempted to develop a simulation model of residents’ firefighting activity against coseismic fire spread using multi-agent system. The developed model was applied to a case study area. In the application, the simulations were carried out to the existing area and eleven cases of the assumption (virtual conditions) of the area where are implemented various non-physical and physical measures. As a result, the measures with only physical and haphazard multitude of measures did not show a remarked effect of disaster prevention performance. And, it is confirmed that the model can visually, dynamically and quantitatively output results. From these outputs, the possibility of contribution for enhancing residents’ awareness and drafting a plan of disaster prevention was confirmed. However, there are still some problems to be solved for the practical use of the model.
keywords	Community-based Planning for Disaster Prevention, Planning Support System, Fire Spread Simulation, Firefighting simulation, Multi-agent system, Cellular Automata
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_73_session7a_601
id	caadria2008_73_session7a_601
authors	Gu, Ning; Jerry Jen-Hung Tsai
year	2008
title	An Interactive Graphical System for Collaborative Architectural Design in 3D Virtual Environments
doi	https://doi.org/10.52842/conf.caadria.2008.601
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 601-608
summary	This paper presents the development of an interactive graphical system applicable to collaborative architectural design in 3D virtual environments and its preliminary application for a building design project. This interactive graphical system integrates the spatial system and the stylistic system and specialises in styles representation and exploration in architectural design.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2008_197
id	ecaade2008_197
authors	Hamid, Bauni
year	2008
title	Collaborative Design and Complex Organization
doi	https://doi.org/10.52842/conf.ecaade.2008.667
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 667-674
summary	This paper discusses our investigation on the potentials of CAAD system implementation to generate collaborative process in a complex organization of construction project. Housing reconstruction projects in disaster-recovery context has been taken as case study to examine some CAAD system that has been claimed as collaborative. Based on social organizational theory and complex adaptive system theory we attempt too test the claim by analyzing the flexibility of these CAD system on the real complex organizational project. We stratify the result based on the level of adaptability of each CAAD system to indicate the level of collaboration.
keywords	Collaborative design: complex organization, disaster recovery, CAAD, reconstruction
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cdc2008_099
id	cdc2008_099
authors	Harrison, David and Michael Donn
year	2008
title	Using Project Information Clouds to Preserve Design Stories within the Digital Architecture Workplace
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 99-104
summary	During the development of an architectural design a series of design stories form. These stories chronicle the collective decision making process of the diverse project team. Current digital design processes often fail to record these design stories because of the emphasis placed on the concise and accurate generation of the virtual model. This focus on an allencompassing digital model is detrimental to design stories because it limits participation, consolidates information flow and risks editorialisation of design discussion. Project Information Clouds are proposed as a digital space for design team participants to link, categorise and repurpose existing digital information into comprehensible design stories in support of the digital building model. Instead of a discrete tool, the Project Information Cloud is a set of principles derived from a proven distributed information network, the World Wide Web. The seven guiding principles of the Project Information Cloud are simplicity, modular design, decentralisation, ubiquity, information awareness, evolutionary semantics and context sensitivity. These principles when applied to the development of existing and new digital design tools are intended to improve information exchange and participation within the distributed project team.
email
last changed	2009/01/07 08:05

_id	ddss2008-30
id	ddss2008-30
authors	Hemmerling, Marco
year	2008
title	Digital MaterialPerception, Interaction and Immersion in Virtual Environments
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper outlines two major aspects of virtual environments for architectural design. On the one hand it focusses on how to use virtual reality as an extended tool to generate spatial design by building up and interacting with a three-dimensional digital model. On the other hand it describes - based on a case study - the relation between perception, interaction and immersion in virtual environments. Both approaches can be interconnected to a continues design process, that allows the designer to create, manipulate, visualize and decide on spatial concepts in a holistic three-dimensional simulation.
keywords	Virtual Environment, Digital Architecture, Immersion, Perception, Human-Computer Interaction
series	DDSS
last changed	2008/09/01 17:06

_id	3de1
id	3de1
authors	Horne M, Thompson E
year	2008
title	The Role of Virtual Reality in Built Environment Education
source	Journal of Education in the Built Environment, Vol 3, Issue 1
summary	This study builds upon previous research on the integration of Virtual Reality (VR) within the built environment curriculum and aims to investigate the role of VR and three-dimensional (3D) computer modelling on learning and teaching in a school of the built environment. In order to achieve this aim, a number of academic experiences were analysed to explore the applicability and viability of 3D computer modelling and VR into built environment subject areas. Although two-dimensional (2D) representations have been greatly accepted by built environment professions and education, 3D computer representations and VR applications, offering interactivity and immersiveness, are not yet widely accepted. The study attempts to understand the values and challenges of integrating visualisation technologies into built environment teaching and investigates tutors’ perceptions, opinions and concerns with respect to these technologies. The study reports on the integration process and considers how 3D computer modelling and VR technologies can combine with, and extend, the existing range of learning and teaching methods appropriate to different disciplines and programme areas.
keywords	3D Computer Modelling, Virtual Reality, Visualisation, Built Environment
series	other
type	normal paper
email
more	http://www.cebe.heacademy.ac.uk/jebe/
last changed	2008/11/02 20:46

_id	ecaade2008_039
id	ecaade2008_039
authors	Indraprastha, Aswin; Shinozaki, Michihiko
year	2008
title	Constructing Virtual Urban Environment Using Game Technology
doi	https://doi.org/10.52842/conf.ecaade.2008.359
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 359-366
summary	Recent game technology ascends development of low-cost virtual environment to the next level in two domains : reality representation and user interaction or engagement. In architecture and urban design realm, realistic 3D representation become more important in such way of conceptualizing ideas and analyzing the context of design problem. This research will present development of virtual urban environment using game engine technology. Aim of this research is to promote game engine as a tool for visual representation, visual analysis and further basic tool for urban design study. At the end, we point out potentials as well as constraints both in technical and design method issues in game technology based on the research findings.
keywords	Game engine: virtual urban environment, design study, visual representation, visual analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2008_32_session4a_263
id	caadria2008_32_session4a_263
authors	Kan, Jeff W.T.; John S Gero
year	2008
title	Do computer mediated tools affect team design creativity?
doi	https://doi.org/10.52842/conf.caadria.2008.263
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 263-270
summary	This paper presents the results of a quantitative analysis to measure the development of creative design ideas in design protocols. It presents a working definition of design creativity used in the analysis followed by the method of study. Five sets of video and audio data were collected from experiments that involved two designers designing similar tasks in three different settings: face-to-face, an Internet GroupBoard, and a 3D virtual world. The most creative pair was selected for qualitative and quantitative analysis. Our result shows that designers developed more design ideas in the face-to-face setting than in the 3D virtual world settings.
keywords	Creativity, protocol analysis, collaborations, virtual world
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2008_181
id	ecaade2008_181
authors	Koehler, Tanja; Dieckmann, Andreas; Russell , Peter
year	2008
title	An Evaluation of Contemporary Game Engines
doi	https://doi.org/10.52842/conf.ecaade.2008.743
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 743-750
summary	The paper deals with a close examination of several contemporary game engines regarding their usability for architectural visualisation that was conducted by third to fifth year students in a seminar context. The study examines the technology of these game engines with the main focus on graphic quality and adaptability to architectural purpose. The evaluation included not only the workflow of importing the 3D model into the engine but also general handling of the software and its user interface. The documentation of the test process and the evaluation of the various engines have been documented in a wiki compiled and written by the students. The information therein and the cost-benefit analyses provided for every engine should assist future users to quickly find the most suitable game engine for their specific purposes.
keywords	game engine, visualization, virtual reality, real-time graphic, 3d model
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: