Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 478

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2010_031
id	caadria2010_031
authors	Burke, A.; B. Coorey, D. Hill and J. McDermott
year	2010
title	Urban micro-informatics: a test case for high-resolution urban modelling through aggregating public information sources
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 327-336
doi	https://doi.org/10.52842/conf.caadria.2010.327
summary	Our contention is that the city is a rich collection of urban micro-ecologies in continuous formation that include information types outside the traditional boundaries of urban design, city planning, and architecture and their native data fields. This paper discusses working with non-standard urban data types of a highly granular nature, and the analytical possibilities and technical issues associated with their aggregation, through a post professional masters level research studio project run in 2008. Opportunities for novel urban analysis arising from this process are discussed in the context of typical urban planning and analysis systems and locative media practices. This research bought to light specific technical and conceptual issues arising from the combination of processes including sources of data, data collection methods, data formatting, aggregating and visualisation. The range and nature of publicly available information and its value in an urban analysis context is also explored, linking collective information sites such as Pachube, to local environmental analysis and sensor webs. These are discussed in this paper, toward determining the possibilities for novel understandings of the city from a user centric, real-time urban perspective.
keywords	Urban; informatics; processing; ubicomp; visualisation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2010_224
id	ecaade2010_224
authors	Trento, Armando; Fioravanti, Antonio; Loffreda, Gianluigi
year	2010
title	Ontologies for Cities of the Future: The quest of formalizing interaction rules of urban phenomena
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.797-804
doi	https://doi.org/10.52842/conf.ecaade.2010.797
wos	WOS:000340629400085
summary	“A city can not be designed” Watanabe [1]: our ambition can be at the maximum to guide someway and in some part its growth. So as planners need tools to aid an open design with uncertain goals. This research group beginto develop such a tool at high level of abstraction (Fioravanti 2008), with theaim of investigating the potentiality of a collaboration among complementary research domains. The present work reports about early implementation results of an innovative approach developed by the authors, for representation of design knowledge. It has been identified in the Urban Design Ontology (Montenegro and Duarte 2009) some design entities and their internal relationships that have been formalized and visualized by means of an intuitive interface. As a matter of fact, this approach, by means of inference engines allows coherence’s check and constraint verification, pointing out incompatibility between initial design program and each partial specialist design solution and/or the overall shared one.
keywords	Knowledge formalization; Urban design ontology; Knowledge structure; Collaborative design; Open design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2008_13_session2a_110
id	caadria2008_13_session2a_110
authors	Wiboonma, Wiboonsiri; Pinyo Jinuntuya, Pizzanu Kanongchaiyos
year	2008
title	Multi-Directional Interrelationship Approach For Hybrid Interactive Design Tool For High-Rise Building
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 110-116
doi	https://doi.org/10.52842/conf.caadria.2008.110
summary	The role of computers in architectural design is constantly increasing, as may be seen in the efforts to develop generative design tools which are focused on helping create innovative results. Some of these are generated by sets of rules, constraints, theoretical models and algorithms, for which the computer is used as the implementing tool. This research introduces a new approach in hybrid interactive design tools, which are focused on the clustered and hectic urban context in the modern age, meaning that architecture is continuously developing vertically, in high-rise buildings. The main point in this research will be the abandoned gap in connecting the internal functions and external appearance. This is another main point which cannot be ignored in designing high rises, which ideally contain both internal and external perceptive aesthetics. The scope of this research will cover three aspects: Function, Perception, and Proportion. Therefore, the work flow of this design tool will be a multi-directional interrelationship between these three steps: 1) internal function and external form generation by various types of constraints, 2) internal function and external form inspection, and 3) internal function and external form modification by the users.
keywords	Generative Design, Interactive Design, High-Rise Building, Multi-Directional Interrelationship, MAX Script
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2008_039
id	ecaade2008_039
authors	Indraprastha, Aswin; Shinozaki, Michihiko
year	2008
title	Constructing Virtual Urban Environment Using Game Technology
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 359-366
doi	https://doi.org/10.52842/conf.ecaade.2008.359
summary	Recent game technology ascends development of low-cost virtual environment to the next level in two domains : reality representation and user interaction or engagement. In architecture and urban design realm, realistic 3D representation become more important in such way of conceptualizing ideas and analyzing the context of design problem. This research will present development of virtual urban environment using game engine technology. Aim of this research is to promote game engine as a tool for visual representation, visual analysis and further basic tool for urban design study. At the end, we point out potentials as well as constraints both in technical and design method issues in game technology based on the research findings.
keywords	Game engine: virtual urban environment, design study, visual representation, visual analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2008_22_session3a_180
id	caadria2008_22_session3a_180
authors	Li, Li; Jingwen Gu, Jing Ma
year	2008
title	A solution of geometric security based on autoCAD
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 180-184
doi	https://doi.org/10.52842/conf.caadria.2008.180
summary	There are numerous electronic blueprints used in engineering today. The geometric security of these blueprints is a big problem to be solved. Based on the research on CAD system mechanics, this paper gives a solution that makes geometric access and use secure,, and gives an implementation on AutoCAD system. It designs a new encryption system compatible with the built-in encryption according to the exploration of variants and commands mechanism in AutoCAD system, and the analysis of structure of drawing database. The solution provides a safe access to files for different level users, and it places the control of edit authority on special geometrics via adding customized objects which contains authority information and password to the graphic information database.
keywords	geometric security, order mechanism, customized object
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddss2008-05
id	ddss2008-05
authors	De Vries, Bauke; Yuzhong Lin and Joran Jessurun
year	2008
title	Sense-of-the-City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Sense-of-the-City was a project that was executed in the city centre of Eindhoven using mobile phones with GPS. Ten persons carried this equipment during the working day for a period of one week. While carrying their route was traced and projected on a map that could be viewed on the internet. The citizens were asked to pictures of places of interest. These pictures are uploaded to the server and attached to the route. Later on text can be added to each picture through the website. All participants showed a high level of engagement in the project. Although the logbooks of the routes that were created on the web provided very personal insights, it was very hard to draw conclusions from these data.
keywords	Location Based Systems, Neighbourhood planning, Citizen engagement
series	DDSS
last changed	2008/09/01 17:06

_id	cf2011_p108
id	cf2011_p108
authors	Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year	2011
title	Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary	Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords	integrated design process, BIM, multidisciplinary design, conceptual framework
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2008_137
id	ecaade2008_137
authors	Palmquist, Erik; Shaw, Jonathan
year	2008
title	Collaborative City Modeling
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 249-256
doi	https://doi.org/10.52842/conf.ecaade.2008.249
summary	This paper presents an approach to creating an online real time rendering environment, upon which a large-scale, urban 3D model can be produced as a collaborative effort between initial content creators and outside parties with an interest in simulation and visualization. In 2007, the City of Atlanta, Georgia organized a taskforce to provide recommendations on the future development and mobility along the city’s signature street, Peachtree Street. To aid in the visualization of this area, datasets were converted into low polygon textured 3D models for the entire study area. This content will serve as the foundation of a collaborative effort to complete a high quality real time environment. The process for this project will be described and the means to extend the boundaries, maintain, and collaborate with this content will be proposed.
keywords	3D model, collaborative design, real time, visualization, training
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_086
id	ecaade2008_086
authors	Elsen, Catherine; Juchmes, Roland; Kubicki, Sylvain; Leclercq, Pierre
year	2008
title	DCDS – Distant Collaborative Design Studio
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2008.325
summary	This paper introduces new supporting tools in the field of distant collaborative design, namely DCDS and CRTI-weB. These prototypes respectively support: the early stages of design, through the support of the crucial initial step of free-hand sketches shared in real-time, and the asynchronous collaborative activities. The main goal of this paper is to propose the use of these innovative tools as an efficient and realistic way of managing long distance collaboration, to effectively serve the designers’ needs. This proposition is analyzed and addressed through a real-size experiment featuring 30 architecture and architectural-engineering students, working together in real-time at different locations (Belgium and France). This experiment and the necessary survey open up interesting fields of investigation, such as the relevance of the proposed services in supporting distant collaborative design in architecture and the benefit this represents for students to merge the IT aspects and the design studio. The methodology and the replicability are analyzed to increase the level and quality of formation of our students and, finally, a criticism of the tools confirms a benefit for the developing teams.
keywords	Distant collaborative design, sketch support systems, asynchronous collaborative activities
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2008_184
id	ecaade2008_184
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Fritz, Oliver; Rüdenauer, Kai; Lemmerzahl, Steffen
year	2008
title	Form Follows Structure?
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 451-458
doi	https://doi.org/10.52842/conf.ecaade.2008.451
summary	This paper can be viewed as the continued development of a research project presented at last year’s eCAADe. The project focused on the potential and possibilities of cooperation among architects, investors with concrete building projects, and researchers at the university level working on generative design and parametric construction. After having spent several years of research on design techniques in a purely academic setting at the university we see, contrary to our fears, that reality and the integration of concrete factors such as budget, time management, etc. does not diminish but rather improves the quality of our work. This work is not primarily concerned with the development of a new architectural language but the intelligent use of modern computer technology based on digitized planning processes defined as ‘complex building design’. Designs developed in this manner can be distinguished by certain characteristics, the evaluation of which is a point critically discussed in the following paper.
keywords	Generative Design, Collaborative Design, Parametric Design, User Participation in Design, Case Study, Strategic Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	82b1
id	82b1
authors	Greenwood D, Horne M, Thompson E M, Allwood C M, Wernemyr C, Westerdahl B.
year	2008
title	Strategic Perspectives of the Use of Virtual Reality within the Building Industries of Four Countries.
source	International Journal of Architectural Engineering and Design Management
summary	This paper presents results from the first stage of an analysis of the use of virtual reality (VR) within the building industries of strategically selected countries, namely, China, Sweden, the UK and the US. The aims of the research are to assess VR usage and its benefits within the building industries of these countries and to identify perceived barriers to VR usage and ways of overcoming them. The countries selected offer a range of experience in the adoption of VR technologies and the paper provides an initial analysis of developments at an international level. Semi-structured interviews were conducted with senior professionals from each of six leading construction companies within each country. The findings included the rationale for the adoption of VR and the barriers to doing so, as well as some divergence between the respondents in their working definition of what visualization and, specifically, VR actually represents.
keywords	Building industry; implementation strategy;international perspectives; interview survey; virtual reality
series	other
type	normal paper
email
last changed	2008/11/26 16:54

_id	ecaade2008_197
id	ecaade2008_197
authors	Hamid, Bauni
year	2008
title	Collaborative Design and Complex Organization
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 667-674
doi	https://doi.org/10.52842/conf.ecaade.2008.667
summary	This paper discusses our investigation on the potentials of CAAD system implementation to generate collaborative process in a complex organization of construction project. Housing reconstruction projects in disaster-recovery context has been taken as case study to examine some CAAD system that has been claimed as collaborative. Based on social organizational theory and complex adaptive system theory we attempt too test the claim by analyzing the flexibility of these CAD system on the real complex organizational project. We stratify the result based on the level of adaptability of each CAAD system to indicate the level of collaboration.
keywords	Collaborative design: complex organization, disaster recovery, CAAD, reconstruction
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia08_458
id	acadia08_458
authors	Hemsath, Timothy; Robert Williams; Ronald Bonnstetter; Leen-Kiat Soh
year	2008
title	Digital CADCAM Pedagogy Model: Intelligent Inquiry Education
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 458-463
doi	https://doi.org/10.52842/conf.acadia.2008.458
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problem-based learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	CAD; Education; Evaluation; Pedagogy; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 07:49

_id	ddss2008-31
id	ddss2008-31
authors	Heurkens, Erwin W.T.M.
year	2008
title	The Urban Decision RoomApplication and Evaluation of an Urban Management Instrument
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The Urban Decision Room (UDR) should be placed in the tradition of urban design and planning discipline that is taught, and into which research is carried out, at the Faculty of Architecture at the Delft University of Technology. The UDR was developed at the faculty as one of the new design and planning methods with its own specific features. The UDR is specifically aimed at decision-making processes in the practice of urban planning, and particularly at complex urban area development projects. The background to the design enables the UDR to support planning decisions that are made at urban planning element level. The participants in the interactive UDR sessions are asked to provide concrete solutions for urban planning design problems (in terms of preferences for particular functions, number of plots, etc.) and to enter them in a simulation model. A computer network is then used to calculate the common solution space of all the proposals, which is then projected onto a central screen. This outcome generally provides the basis for further discussions and negotiations, after which another round as described above can be held. The paper first focuses on the background and the main features of the UDR system. Secondly, the decision-making issue and a description of a specific Urban Decision Room model, the UDR Heijsehaven will be explained. Thirdly the structure of, and the experiences from, the experimental sessions with the Urban Decision Room Heijsehaven are described. After that the results of the evaluation of the UDR system by participants is presented and finally the follow-up assignment for the UDR system is carried out.
keywords	Urban Decision Room, UDR Heijsehaven, Urban Renewal Project, Urban Planning, Urban Management Instrument, Common Solution Space, Decision Support System
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_175
id	ecaade2008_175
authors	Jeong, Yongwook; Trento, Armando
year	2008
title	Interleaving Semantics: a Filter Mediated Communication Model to Support Collaboration in Multi-Disciplinary Design
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 643-652
doi	https://doi.org/10.52842/conf.ecaade.2008.643
summary	The purpose of collaboration is to integrate the separate knowledge possessed by the participants in the design process into one meaningful whole. Centralized data structures, showed that the AEC industry is so fragmented that the data-centric approach is not feasible, for technical and procedural reasons. The shared database, minimizing the complexity of translating different form of representation, quickly becomes too large and unwieldy to support the dynamic process of multi-disciplinary collaborative design. In this paper, we propose a distributed model that includes a mechanism to facilitate the participants’ intentions more effectively by incorporating semantics into their representations. We also present how the semantics would be authored and published through the mechanism so that a higher level of shared understanding among the participants would be achieved.
keywords	Multidisciplinary Collaboration, Semantic Network, Ontology, Artificial Agent
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss2008-22
id	ddss2008-22
authors	Keim, Christian
year	2008
title	Modelling urban dynamics through cellular automata: an empirical application
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Actual developments of digital maps and tools given by GIS-systems provide the possibility to develop new methodologies to handle land-cover data for modelling purposes. At any rate empirical applications are still rare within the Geosimulation studies and yet there is not an established methodology. The aim of the work has been to construct a cellular automata (CA) model of a sprawling city region within the German context, based on empirical data. The urban land-use classes (LUC) are considered as a higher organisation level of different building typologies and relative functions. These define the land-use patterns as self-organized from their complex spatial iterations, based on limited local information exchange. On the one hand the synthesis capacity of the CA models has been verified, even without socio-economical variables. On the other hand, it has been seen that the still early evolutional state of digital land-cover datasets are too premature to fully suite the modelling purposes.
keywords	Complex Systems, Self-Organisation, Cellular automata, Geographical information systems, Land-use change
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_286
id	acadia08_286
authors	Khan, Omar
year	2008
title	Reconfigurable Molds as Architecture Machines
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 286-291
doi	https://doi.org/10.52842/conf.acadia.2008.286
summary	In The Architecture Machine (1970), Nicholas Negroponte postulates the development of design machines wherein the “design process, considered as evolutionary, can be presented to a machine, also considered as evolutionary, and a mutual training, resilience, and growth can be developed.” The book, dedicated to “the first machine that can appreciate the gesture,” argues for developing machines with human like qualities. This paper aims to develop an alternative trajectory to the “evolutionary” architecture machine, this time not towards anthropomorphism but responsiveness. The aim on one level is the same: to create machines that appreciate the gesture. However our approach is tied to more modest aims and means that bring current thinking on evolutionary processes and the forming of materials together. The reconfigurable mold (RCM) is an architecture machine that produces parts that can be combined to create more complex organizations. The molds are simple analog computers that employ various continuous scales like volume, weight and heat to develop their unique components. Parametric alterations are made possible by affecting these measures in the process of fabrication. An underlying material that is instrumental in the molds is rubber, whose variable elasticity provides unique possibilities for indexing the gesture that remains elusive for industrial processes.
keywords	Casting; Digital Fabrication; Generative; Material; Morphogenesis
series	ACADIA
last changed	2022/06/07 07:52

For more results click below: