Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-35
id	ddss2008-35
authors	Neema, M.N. and A. Ohgai
year	2008
title	A GA-based Multi-Objective Optimization Model for Location Planning of Urban Parks and Open Spaces A Case Study on Dhaka City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper, we present a new multi-objective location model for urban parks and open spaces (POSs) planning. We developed a Genetic Algorithm (GA) based multi-objective optimization model (GAMOOM) to derive optimum locations of POSs by considering four incommensurable objectives with the provision of POSs near: 1) densely populated areas, 2) air polluted areas, 3) noisy areas, and 4) areas without open spaces. The success of the model is presented through its application as a case study on Dhaka City. Obtained results indicate that the model can successfully provide optimum location of required POSs. The findings from this study also signify that optimum location of POSs obtained by utilizing only the second objective is substantially different than that of others. Moreover, there is also difference in optimum location of POSs by taking into account only the third objective when compared with others. Therefore, considering single objective cannot give optimum results for good POSs planning. So, it is verified that POSs should be planned by optimizing multiple objectives instead of single objective. The outcome of this multi-objective GAMOOM model does have an implication on how POSs should be designed and managed by the planning authority for not only sustainable environment but also better quality of life in a city.
keywords	Genetic Algorithm (GA), Multi-Objective Optimization, Parks and Open Space (POS)
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_158
id	ecaade2008_158
authors	Kaga, Atsuko; Sugawara, Shihomi
year	2008
title	Research on the Visualization for Analyzing City Changes
doi	https://doi.org/10.52842/conf.ecaade.2008.939
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 939-944
summary	To perceive such changes of city space visually, a three-dimensional (3D) city space model is effective. The use of buildings in a city space is complex, reflecting the number of stories, and the number of stories in many cases. Furthermore, environmental parameters, such as opening a shop developed for conditions of the location, the existence of a building which is easy to divert to some other purpose, a managerial layer, and the whole country, is closely related to city change. A city change can be analyzed from various perspectives if such information can also be accumulated and displayed. If it is expressed in two dimensions, it will be restricted, but if expressed in 3D, the use situation of city space can be grasped quickly. Commercial 3D GIS software is useful for visualizing such a 3D city space model while referring to attribute information. However, such software is expensive and its use is restricted. For this study, highly extensible 3D modeling software is used to develop a technique for visualizing city spaces using its attribute information. Then the developed script is applied to an actual city model in Japan.
keywords	City Analysis, Urban design, 3D-model, City Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss2008-08
id	ddss2008-08
authors	Koshak, Nabeel A.; Abdullah Fouda
year	2008
title	Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords	Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_77_session7b_635
id	caadria2008_77_session7b_635
authors	Loemker, Thorsten M.
year	2008
title	In-situ Analyses of Buildings by means of Smart Devices and Location Based Services
doi	https://doi.org/10.52842/conf.caadria.2008.635
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 635-641
summary	In this research we examined if it might be possible that a client accomplishes an ad-hoc analysis of an existing building with the intention of prospective revitalization. The aim is to give a client who incidentally faces a building the possibility to run an in situ usability simulation. To accomplish this we recommend Location Based Services that can be accessed by common remote sensing devices. These devices should automatically connect to server-based applications, which compare the requirements of the client with the existing building and run remote simulations on concrete further utilization. The newly generated information will then be passed back to the clients’ device. In the paper we address a scenario of a prospective client who visits a city where he hits on an unused building he might be interest in. The client wishes to gain immediate and accurate information if the building is able to meet his demands regarding the space needed for his company. Different techniques investigated, their assets and drawbacks will be described that could accomplish suchlike tasks.
keywords	Location Based Services, Smart Environments, Ubiquitous Computing, Optimization
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2018_033
id	caadria2018_033
authors	Bai, Nan and Huang, Weixin
year	2018
title	Quantitative Analysis on Architects Using Culturomics - Pattern Study of Prizker Winners Based on Google N-gram Data
doi	https://doi.org/10.52842/conf.caadria.2018.2.257
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 257-266
summary	Quantitative studies using the corpus Google Ngram, namely Culturomics, have been analyzing the implicit patterns of culture changes. Being the top-standard prize in the field of Architecture since 1979, the Pritzker Prize has been increasingly diversified in the recent years. This study intends to reveal the implicit pattern of Pritzker Winners using the method of Culturomics, based on the corpus of Google Ngram to reveal the relationship of the sign of their fame and the fact of prize-winning. 48 architects including 32 awarded and 16 promising are analyzed in the printed corpus of English language between 1900 and 2008. Multiple regression models and multiple imputation methods are used during the data processing. Self-Organizing Map is used to define clusters among the awarded and promising architects. Six main clusters are detected, forming a 3×2 network of fame patterns. Most promising architects can be told from the clustering, according to their similarity to the more typical prize winners. The method of Culturomics could expand the sight of architecture study, giving more possibilities to reveal the implicit patterns of the existing empirical world.
keywords	Culturomics; Google Ngram; Pritzker Prize; Fame Pattern; Self-Organizing Map
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cdc2008_267
id	cdc2008_267
authors	Rojas, Francisca M.; Kristian Kloeckl and Carlo Ratti
year	2008
title	Dynamic City: Investigations into the sensing, analysis and application of real-time, location-based data
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 267-278
summary	Over the past decade, our cities have been blanketed with digital bits. Unlike the old electromagnetic, unidirectional waves, these bits are bidirectional – they communicate – and are thus tied to human activities. Our hypothesis is that by analyzing these bits we can gain an augmented, fine-grained understanding of how the city functions - socially, economically and yes, even psychologically. Some preliminary results from different projects recently carried out at MIT senseable city lab are discussed below.
email
last changed	2009/01/07 08:05

_id	acadia08_230
id	acadia08_230
authors	Tierney, Therese
year	2008
title	Network Morphologies: Neuronal Systems as Models for Relational Form Generation
doi	https://doi.org/10.52842/conf.acadia.2008.230
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 230-237
summary	Since the late 1990s, architectural form making has investigated advanced computation at the earliest stages of design through inductive analytic and algorithmic processes. This paper proposes a relational or contextual organization by analyzing existing networked models. It firstly presents a literature review regarding the development of networked models and then outlines the requirements for a conceptual prototype for future design applications.
keywords	Computation; Design; Generative; Morphogenesis; Neural Networks
series	ACADIA
last changed	2022/06/07 07:58

_id	asanowicz02_paper_eaea2007
id	asanowicz02_paper_eaea2007
authors	Asanowicz, Aleksander; Katarzyna Asanowicz
year	2008
title	The Dynamic Perception of Digitally Created Abstract Urban Space
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Sigmund Freud in his book has used a City as a Metaphor of human Psyche. According to him City is not only images of the forms given us in the process of perception but all invisible and nowadays not existing forms (buildings) too. This way of representing historical sequences is possible thanks to ability of our mind to parallel consideration of different spatial meanings. Aldo Rossi called it - “analogous City” – a city which includes the existing buildings, buildings which was existed in the same place in the past and imaginary buildings (our visions of future development of the city). As a result – City is a place where real and virtual meet. Aldo Rossi presents an “analogous city” as a mental map which includes real and unreal forms representing, at the same time, remembered and imagined events. He has written: “When we back to the place after long absence we not only recognize it, but at the same time start remembering events which has happened at this place in the past. Peter Eisenman in “The City of Artificial Excavation” has analyzed the city as an archaeologist, who excaved forgotten buildings and showed us unknown connections and meanings.
keywords	city perception, emotions, digital composition
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2008_103
id	sigradi2008_103
authors	Baltazar, Ana Paula; Maria Lucia Malard, Silke Kapp, Pedro Schultz
year	2008
title	From physical models to immersive collaborative environments: testing the best way for homeless people to visualise and negotiate spaces
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper describes an experiment to investigate the best way for lay people to use representation to visualise and negotiate space. It was motivated by our observations in workshops for digital inclusion in the context of a housing project for a homeless association. Computers were used to make it easier for the community to understand and change the spaces in real time. The first workshops proved that our approach was efficient as an exercise but not certainly effective concerning the understanding of spatial qualities. So we have designed an experiment to compare the usability of different media in participatory design processes. For that we have adapted the ‘Usability’ methodology, which is fully described in the paper. We started with three main questions. The first concerned the effectiveness of different media to represent spatial quality; the second concerned the best way for novices to approach space, whether by refurbishing a pre-existing space or by starting from the scratch; and the third concerned the effectiveness of negotiation by means of discourse and by means of or action. We also had two main hypothesis: one coming from research on digital environments and stereo visualisation, indicating that the more people feel immersed in the represented environment the more they are able to correlate it with physical space; and the other coming from our own observations in the participatory design workshops, in which the collective decision-making was manipulated by those people with more advanced communication skills who use their ability in an authoritative way regardless of the relevance of what they have to say. This paper describes the whole experiment, which was an exercise of spatial negotiation in 5 versions. In the first version we provided fixed digital views of a room in plan and axonometry; for another two versions we provided a physical model of the room in 1:10 scale, with some pieces of the existing furniture in different scales. This was done to check if people were just playing with a puzzle or actually grasping the correspondence between representation and the object or the space represented. One version proposes refurbishment and the other starts from the scratch. And the last two versions repeated the same task made with the physical model, but this time using a 3D interactive digital model. People were required not only to organise the furniture in the space but also to build a full scale cardboard structure and organise the real furniture reproducing their proposed model. Their comments on the spaces they had built confronted with what they had imaged when working with the model has enabled us to compare the different models, as also the different ways of negotiating spaces. This paper describes this experiment in detail concluding that 3D digital interactive models are far more effective than physical models and 2D drawings; when negotiation happens by means of action it provides more creative results than when the discoursive practice prevails; people are more creative when they start something from scratch, though they spend more time. The results of this experiment led us to formulate a new hypothesis leading to the development of an immersive collaborative environment using stereoscopy.
keywords	Visualisation, negotiation, immersive environment, digital interfaces, homeless people
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia08_126
id	acadia08_126
authors	Cook+Fox Architects
year	2008
title	The Generation of a Smart Cloud
doi	https://doi.org/10.52842/conf.acadia.2008.126
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 126-133
summary	This paper presents the process by which Cook+Fox Architects responded to a design challenge that was part metaphorical and part practical. The project involved providing an environmental response to the natural world existing almost 800 feet above the ground, on the second-highest occupiable floor of New York City’s second-tallest building. Environmentally-responsive features at the Bank of America Tower at One Bryant Park are expected to make it the first LEED-Platinum high-rise in the world. The fiftieth floor was conceived as a headquarters for the fashion designer Elie Tahari, the south facing portion of the floorplate was to house a highly adaptable showroom that needed to be adaptable to complement and enhance each season’s particular aesthetics. Additionally, the ceiling in the showroom space needed to allow for optimized height in an environment where structural, mechanical, electrical and sprinkler systems were all designed to be concealed. A combination of numerous computer-aided design scripts took into account various input variables and finally led to the generation of a Smart Cloud.
keywords	Analysis; Behavior; Generative; Optimization; Performance
series	ACADIA
last changed	2022/06/07 07:56

_id	caadria2008_47_session5a_383
id	caadria2008_47_session5a_383
authors	Paulini, Mercedes; Marc Aurel Schnabel
year	2008
title	Surfing The City: Towards context-aware mobile exploration
doi	https://doi.org/10.52842/conf.caadria.2008.383
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 383-390
summary	This paper describes the rationale for a navigational system that supports context-based exploration of the urban environment. While many navigational tools support wayfinding, they are based on targeted search, requiring the user to have a predetermined destination. Existing applications do not offer navigational mechanisms that base their recommendations on the user’s unique context information. Customised recommendations present the user with relevant routes they may not have discovered on their own. In this paper, a parallel is drawn between wayfinding in the physical world and the virtual, with web surfing acting as a metaphor for a particular style of interaction with the physical environment. Similarly, the framework for this system presents suggested routes to the user according to their unique contextual setting, which is anticipated to allow a more explorative engagement with their physical environment.
keywords	Mobile computing; context-awareness; urban interaction
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddss2008-46
id	ddss2008-46
authors	Sharma, Shrikant B. and Vincent Tabak
year	2008
title	Rapid Agent Based Simulation of People Flow forDesign of SpacesAnalysis, Design and Optimisation
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents a novel static-dynamic network based people flow simulation model applied to design optimisation of circulation spaces within buildings and urban areas. In the current state of art the majority of existing people flow simulation models are driven by analysis rather than design. This is fine for simpler, evacuation type scenarios where a single or a few analyses runs are sufficient to determine the evacuation time. For more complex scenarios such as crowd circulation with complex multi-directional flow, one is as interested in the sensitivity of various design and stochastic behavioural parameters, so the rapid modelling simulations together with design capability become important. This paper presents a simplified network based people flow model that enables rapid simulations and therefore iterative design optimization of circulation space. The work integrates the techniques of graph-theory based network analysis with an origin-destination matrix model of crowd flow, to provide a rapid, parametric model. The resulting model can be analysed in a static as well as dynamic state. In the static state, the model analyses space based on connectivity of nodes, superimposed with the origin-destination matrix of population to provide valuable information such as footfalls, density maps, as well as quasi-static parameters such as mean flow rates. In the dynamic state, the model allows time-dependent analysis of flow using a detailed agent based simulation that also incorporates dynamic route-choice modelling, agent behaviours and interaction, and stochastic variations. The paper presents the integrated modelling technique and its implementation into simulation software SMART Move.
keywords	People Flow, Pedestrian, Agent Based Simulation, Evacuation, Network, Optimisation
series	DDSS
last changed	2008/09/01 17:06

_id	ijac20097303
id	ijac20097303
authors	Taron, Joshua M.
year	2009
title	Interactive Hemostasis Modeling in Urban Network Design
source	International Journal of Architectural Computing vol. 7 - no. 3,375-387
summary	This paper describes a type of project that images a city as it might exist given the integration of hemostatic procedures within pedestrian networks during emergencies requiring full-scale egress from an urban core. It articulates the steps taken to integrate a pre-existing C++ hemostasis model (C. Jacob, 2008) into Maya software in order to describe how the project operates on a computational level. By projecting these agent-based logics directly into/onto each pedestrian in the city (the smallest unit of the system), egress-oriented infrastructure can shift from being extensively predetermined in form (concrete barriers, metal railing, police barricades, etc.), to something more intensively defined, real-time, and locally on-demand. These procedures are situated within a larger schema based on the structural principles of Norbert Wiener's cybernetic feedback loops, that acknowledge and allow for hybrid (top-down + bottom-up) awareness and control within systems. The project attempts to ally itself with emerging forms of network design with similar structural typologies supported through the use of personal mobile devices (PMDs) in urban environments.
series	journal
last changed	2009/10/20 08:02

_id	ddss2008-45
id	ddss2008-45
authors	Van der Waerden, Peter; Antônio Nélson Rodrigues da Silva, Harry Timmermans, Mike Bérénos & Gustavo Rennó Rocha
year	2008
title	Public Transport Planning Evaluation Tools and theirData Requirements and Availability
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper describes two different public transport planning evaluation tools that are used to support planning activities in The Netherlands and Brazil. In the paper extra attention is paid to data requirements and availability. The Dutch tool generates so-called Public Transport Potential Maps that present the potential of public transport at the level of 6-digit postal code zones based on area and public transport related characteristics. With the Brazilian tool, existing and new implemented public transport routes can be evaluated. To identify urban features that influence the performance of the public transport system, the tool compares characteristics of the urban spaces with the different typologies of public transport routes. Examples of the use of both tools including data requirement and availability are shown in this paper, stressing the fact that GIS is currently an essential and universal tool for public transportation planning, despite the conditions of the site and the complexity of the model under analysis.
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	caadria2008_50_session5a_409
id	caadria2008_50_session5a_409
authors	Wessel, Ginette M.; Eric J. Sauda, Remco Chang
year	2008
title	Urban Visualization: Urban Design and Computer Visualization
doi	https://doi.org/10.52842/conf.caadria.2008.409
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 409-416
summary	Historically, the city represents not just a collection of buildings, but also the concrete cosmology of the world. The importance of geometry in this context is that one can be assured that one’s understanding of the form of the city will correspond to meaning. It is this reading that is the canonical visualization method of the city form. But contemporary urban designers are confronted by cities with overlapping systems of movement and information that has made the reading of geometry insufficient for an understanding of the city. Our interdisciplinary team of researchers has been studying issues related to urban visualization from the perspectives of urban design and computer visualization. Together, we have published work demonstrating how very large and disparate data sets can be visualized and integrated in unique ways. Building on this existing work that connects the two disciplines, this paper presents a survey of six urban design methodologies that may be useful for visualization. Each approach is described through a brief history, a conceptual overview and a diagrammatic exegesis. The conclusion presents an overview of the complementary natures of the discourses in urban design and computer visualization and a prospectus for application of the identified methodologies to computer urban visualization. We conclude that urban theories can inform urban visualization both as a method of informing generation and run-time simplification of 3D geometric modeling and in managing information visualization overlay issues for the very large, over-lapping data sets.
keywords	Visualization: urbanism
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia08_158
id	acadia08_158
authors	Hight, Christopher; Natalia Beard; Michael Robinson
year	2008
title	Hydrauli_City: Urban Design, Infrastructure, Ecology
doi	https://doi.org/10.52842/conf.acadia.2008.158
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 158-165
summary	The Hydrauli_city project was commissioned by the Harris County Flood Control District, Brays Bayou Partnership and the Rice School of Architecture to research the transformation of one of the 21 main Bayous in Houston. The project seems perfectly aligned with the theme of the issue because it examines the relationship between infrastructure, risk and urban design, and does so by attempting to leverage diverse time scales and scales of intervention into the maintenance of this infrastructure, rethinking the legacy of its top-down 20th century planning logics. Moreover, it raises key questions about new agencies and sites that may be available to architects that seek to engage the political ecologies of the contemporary metropolis. Through research on the hydraulic urbanism of Houston and through three speculative design proposals, Hydrauli_city presents research about transforming Brays Bayou. The project attempts to provide a figure for and foster the new forms of collectives and networks required to transform the urban condition of Houston without resorting to unrealistic top-down planning infrastructures. We located several scales and time-frames of operations, from micro-scaled interventions derived from ongoing maintenance of the bayous to larger scale transformations now possible due to the programs to reduce the risk of flooding in the bayou’s watershed. Hydrauli_city maps the confluences of interests and agencies invested in Brays Bayou at this crucial moment in its history, and offers proposals of bold new civic spaces for the Green Century. The project will be disseminated via an interactive website and a series of public presentations to raise awareness and spark conversation. Flood risk management is a hybrid phenomenon, at once the object of scientific knowledge, engineering practice, and political and economic forces, positioning the architect in a prime-position to intervene.
keywords	Infrastructure; Mapping; Morphogenesis; System; Urbanism
series	ACADIA
last changed	2022/06/07 07:50

_id	sigradi2011_100
id	sigradi2011_100
authors	Kutschat Hanns, Daniela; De Marchi, Polise Moreira
year	2011
title	Estratégias de reconfiguração do espaço urbano – cidade superfície: diálogos entre arte e cidade mediados por intervenções artísticas em fachadas e muros na cidade de São Paulo [Urban space reconfiguration strategies - surface city: dialogs between art and city mediated through artistic interventions on facades and walls in the city of São Paulo]
source	SIGraDi 2011 [Proceedings of the 15th Iberoamerican Congress of Digital Graphics] Argentina - Santa Fe 16-18 November 2011, pp. 526-529
summary	This paper discusses multiple aspects of the city through examples of artistic interventions which see the city as complex and dynamic layers in constant change. This paper investigates the spatial configuration changes of São Paulo city in material surfaces as facades and walls. The understanding of urban surfaces as "'mediative' spatiality" (Ferrara, 2008) assigns communication categories to urban surfaces; the visual condition is discussed in this paper.
keywords	Surface city; art; urban intervention; urban landscape
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

For more results click below: