Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 490

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-08
id	ddss2008-08
authors	Koshak, Nabeel A.; Abdullah Fouda
year	2008
title	Analyzing Pedestrian Movement in Mataf Using GPSand GIS to Support Space Redesign
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Evaluating the use of architectural and urban spaces is an important issue for architects and urban designers who wish to enhance space usability. Space usability is crucial in crowded spaces such as Mataf areas. Millions of people come to the city of Makkah, Saudi Arabia every year to perform Hajj (Islamic Pilgrimage) and Umrah. A cornerstone of Hajj and Umrah spirituals is to perform Tawaf, which is the circumambulation of the Ka'bah in the center of the Holy Mosque in Makkah. The areas of performing Tawaf (called Mataf) become very crowded during Hajj and the last ten days of Ramadan. This paper demonstrates how we utilized Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to analyze pedestrian movement while performing Tawaf. During the Hajj of 1424 H (2004 in the Georgian Calendar), several GPS devices were used to collect pedestrian movement coordinates at specific time intervals. Computer software for tracking analysis is used to visualize and analyze the pattern of pedestrian movement in Tawaf. The software allows users to view temporal data, which can be set up with past time windows for historical data analysis. The findings of this research show levels of service and flow rates throughout different zones and times of Mataf. They indicate the most critical zones and times for Tawaf during Hajj. They also visually demonstrate the track pattern of pedestrian movement at different locations in the Tawaf area. The paper concludes with some redesign recommendations to remove obstacles and facilitate pedestrian movement in Tawaf. The approach described in this paper can be implemented in architectural and urban design space modifications to improve pedestrian movement in open spaces.
keywords	Pedestrian movement analysis, GPS, GIS, Hajj, Makkah, Tawaf
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_158
id	ecaade2008_158
authors	Kaga, Atsuko; Sugawara, Shihomi
year	2008
title	Research on the Visualization for Analyzing City Changes
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 939-944
doi	https://doi.org/10.52842/conf.ecaade.2008.939
summary	To perceive such changes of city space visually, a three-dimensional (3D) city space model is effective. The use of buildings in a city space is complex, reflecting the number of stories, and the number of stories in many cases. Furthermore, environmental parameters, such as opening a shop developed for conditions of the location, the existence of a building which is easy to divert to some other purpose, a managerial layer, and the whole country, is closely related to city change. A city change can be analyzed from various perspectives if such information can also be accumulated and displayed. If it is expressed in two dimensions, it will be restricted, but if expressed in 3D, the use situation of city space can be grasped quickly. Commercial 3D GIS software is useful for visualizing such a 3D city space model while referring to attribute information. However, such software is expensive and its use is restricted. For this study, highly extensible 3D modeling software is used to develop a technique for visualizing city spaces using its attribute information. Then the developed script is applied to an actual city model in Japan.
keywords	City Analysis, Urban design, 3D-model, City Visualization
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss2008-46
id	ddss2008-46
authors	Sharma, Shrikant B. and Vincent Tabak
year	2008
title	Rapid Agent Based Simulation of People Flow forDesign of SpacesAnalysis, Design and Optimisation
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents a novel static-dynamic network based people flow simulation model applied to design optimisation of circulation spaces within buildings and urban areas. In the current state of art the majority of existing people flow simulation models are driven by analysis rather than design. This is fine for simpler, evacuation type scenarios where a single or a few analyses runs are sufficient to determine the evacuation time. For more complex scenarios such as crowd circulation with complex multi-directional flow, one is as interested in the sensitivity of various design and stochastic behavioural parameters, so the rapid modelling simulations together with design capability become important. This paper presents a simplified network based people flow model that enables rapid simulations and therefore iterative design optimization of circulation space. The work integrates the techniques of graph-theory based network analysis with an origin-destination matrix model of crowd flow, to provide a rapid, parametric model. The resulting model can be analysed in a static as well as dynamic state. In the static state, the model analyses space based on connectivity of nodes, superimposed with the origin-destination matrix of population to provide valuable information such as footfalls, density maps, as well as quasi-static parameters such as mean flow rates. In the dynamic state, the model allows time-dependent analysis of flow using a detailed agent based simulation that also incorporates dynamic route-choice modelling, agent behaviours and interaction, and stochastic variations. The paper presents the integrated modelling technique and its implementation into simulation software SMART Move.
keywords	People Flow, Pedestrian, Agent Based Simulation, Evacuation, Network, Optimisation
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-03
id	ddss2008-03
authors	Zhu, Wei and Harry Timmermans
year	2008
title	Incorporating Principles of Bounded Rationality intoModels of Pedestrian Shopping BehaviorTheory and Example
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The modeling and simulation of pedestrian behavior has been dominantly relied on rational choice models in which pedestrians are assumed to be capable of processing a large number of choice alternatives and trade off attribute utilities. In reality, however, pedestrian behaivor shows the evidence of bounded rationality. They simplify the decision problem by considering a limited number of factors as well alternatives, using heuristics to arrive at satisfactory as opposed to optimal choices. Incorporating principles of bounded rationality in pedestrian modeling will benefit the understanding of individual decision processes and planning practice. This paper proposes an approach that models the cognitive processes such as filtering factors, constructing preference structures, deriving heterogeneous decision heuristics, and selecting decision strategies. The approach is also exemplified through estimating the model on pedestrian store patronage behavior data, collected in a shopping center in Shanghai, China. The results show the estimated probabilities of usage of decision strategies and the sequences of factor search. Compared with the conventional multinomial logit models, the results indicate the statistical advantages of the new approach.
keywords	Bounded rationality, decision heuristics, heterogeneity, pedestrian, store patronage decision
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-28
id	ddss2008-28
authors	Rügemer, Jörg
year	2008
title	Pimp my Box – Architecture of TransformationInterdisciplinary Collaboration and Various Media as DesignDecision and Support Tools
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The paper describes an interdisciplinary architectural design studio setting at the graduate level, which explores the notion of “transformation” in architecture. By collaborating with a group of modern dance students, the studio approaches the creation of space from a different perspective, using dynamic movement coupled with digital tools as a space generator.
keywords	Transformation of Space, Dynamic Space, Hybrid Design Method, Interdisciplinary Studio Approach
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-05
id	ddss2008-05
authors	De Vries, Bauke; Yuzhong Lin and Joran Jessurun
year	2008
title	Sense-of-the-City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Sense-of-the-City was a project that was executed in the city centre of Eindhoven using mobile phones with GPS. Ten persons carried this equipment during the working day for a period of one week. While carrying their route was traced and projected on a map that could be viewed on the internet. The citizens were asked to pictures of places of interest. These pictures are uploaded to the server and attached to the route. Later on text can be added to each picture through the website. All participants showed a high level of engagement in the project. Although the logbooks of the routes that were created on the web provided very personal insights, it was very hard to draw conclusions from these data.
keywords	Location Based Systems, Neighbourhood planning, Citizen engagement
series	DDSS
last changed	2008/09/01 17:06

_id	cdc2008_099
id	cdc2008_099
authors	Harrison, David and Michael Donn
year	2008
title	Using Project Information Clouds to Preserve Design Stories within the Digital Architecture Workplace
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 99-104
summary	During the development of an architectural design a series of design stories form. These stories chronicle the collective decision making process of the diverse project team. Current digital design processes often fail to record these design stories because of the emphasis placed on the concise and accurate generation of the virtual model. This focus on an allencompassing digital model is detrimental to design stories because it limits participation, consolidates information flow and risks editorialisation of design discussion. Project Information Clouds are proposed as a digital space for design team participants to link, categorise and repurpose existing digital information into comprehensible design stories in support of the digital building model. Instead of a discrete tool, the Project Information Cloud is a set of principles derived from a proven distributed information network, the World Wide Web. The seven guiding principles of the Project Information Cloud are simplicity, modular design, decentralisation, ubiquity, information awareness, evolutionary semantics and context sensitivity. These principles when applied to the development of existing and new digital design tools are intended to improve information exchange and participation within the distributed project team.
email
last changed	2009/01/07 08:05

_id	caadria2008_52_session5a_426
id	caadria2008_52_session5a_426
authors	Kaga, Atsuko; Yasuko Matsunaga, Kenichi Sakai, Tomohiro Fukuda
year	2008
title	Construction of a design support system for the public space design in which a citizen participates: The interactive design system in a workshop
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 426-432
doi	https://doi.org/10.52842/conf.caadria.2008.426
summary	Workshops are held with local residents’ participation as one technique by which residents plan roads and places along a route. Because residents without special knowledge participate in such workshops, it is necessary to show the contents intelligibly so that all participants might grasp the plan contents and examine them. Moreover, for community planning workshops, because the time during which they can be held is restricted, within that time, plan- related information must be organized efficiently for rapid examination and searching of its contents. As an interactive system, a real-time simulation (RS) is sought that allows rapid drawing and that has a structure to display the contents of a plan using a three-dimensional space model in real time. The purpose of this research is to build a system that supports environmental space design, which uses RS in the workshop, and which is applicable for evaluation of an actual street space maintenance plan.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddss2008-43
id	ddss2008-43
authors	Katoshevski, Rachel; Theo Arentze and Harry Timmermans
year	2008
title	Simulating Urban Dynamics Using a Combination of CellularAutomata and Activity-Based Models
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Cellular automata models of urban change have been criticised for their lack of behavioural theory and representation in simulating urban change. It has led to a plea for developing multi-agent models. As a first step into this direction, this paper discusses the formulation of a combination of a cellular automata representation for an initial configuration of land use. This is linked to an activity-based model of travel demand, which generates varying demand for facilities across space. Agents, representing facility providers respond to this demand in locating and resizing their facilities. The interplay between these components then results in urban dynamics. The model is illustrated using a hypothetical example of urban forms.
keywords	Cellular automata, Activity-Based Modelling, Urban dynamics
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_20_session3a_168
id	caadria2008_20_session3a_168
authors	Lan, Ju-Hung
year	2008
title	Smart Space for Office Daily Life: A Situated Life Pattern Approach
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 168-173
doi	https://doi.org/10.52842/conf.caadria.2008.168
summary	Researches in smart space design have been focused on using ubiquitous computing technologies to provide the visions of future lives in physical spaces. However, most researches have less concern for the logical usability in creating smart spaces for the occupants. The study is interested in designing a smart space which is occupant-centric and situated-life-oriented based on ubiquitous computing technologies. A spatial system prototype with smart door, smart wall, and smart table is developed from a situated life pattern approach to support typical office life events. The design problems of integrating ubiquitous computing devices with physical spatial components are explored and discussed.
keywords	Smart space, ubiquitous computing, situated life pattern
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2008_006
id	ecaade2008_006
authors	Marin, Philippe; Bignon, Jean-Claude; Lequay, Hervé
year	2008
title	Integral Evolutionary Design, Integrated to Early Stage of Architectural
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 19-26
doi	https://doi.org/10.52842/conf.ecaade.2008.019
summary	This paper deals with the architectural design process and the digital tools able to support a creative activity. Evolutionary devices are expected to support the architect in the initial phase of his work in progress and to stimulate his creativity through analogical thinking. An experimental tool is described, this one is using a genetic algorithm to explore the solution space, and it is based on both solar passive qualities and subjective interaction.
keywords	Architectural design process, evolutionary design, genetic algorithm, analogical thinking, environmental parameters
series	eCAADe
email
last changed	2022/06/07 07:59

_id	9d5f
id	9d5f
authors	Podevyn M, Horne M, Fisher P, Thompson, E
year	2008
title	Global Visualisation Engines – Issues for Urban Landscape Planning Participation Processes
source	Digital Design in Landscape Architecture 2008, Proceedings at Anhalt University of Applied Sciences, 29-31 May 2008
summary	Traditional planning processes use two-dimensional drawings, plans, sections, elevations and artists’ impressions to communicate design intent to interested parties. Three-dimensional computer visualisation technologies that support the planning process raise institutional and organisational challenges as their perceived benefits are considered. Virtual Reality (VR) models add interactivity and immersiveness to landscape visualisations but require appropriate technical input and management. This paper explores two main themes. Firstly, how interactive 3D computer simulations of planning proposals can be adopted to successfully improve the traditional process. It reports on a pilot study to examine how architects, clients, planning officers and university researchers have worked together to systematically examine and analyse this changing process. It reports on issues concerned with ownership of city models, the roles and the compatibility, accuracy and remote sharing of urban data. Secondly, we explore the emerging theme of web-based GIS applications and their impact on architectural visualisation. The process of placing urban data onto Google Earth was tested and the resulting issues emerging with this software, including IT and data management and accuracy issues for suitable architectural visualisation are discussed. The study also reports and offers an overview of placing accurate urban landscape data onto Google Earth and a discussion of using this method for online public participation and communicating technical building information.
keywords	3D modelling, planning process, VR city models, Google Earth
series	other
type	normal paper
email
last changed	2008/11/02 21:09

_id	ddss2008-38
id	ddss2008-38
authors	Schieck, Ava Fatah gen.; Alan Penn, Eamonn O’Neill
year	2008
title	Mapping, sensing and visualising the digitalco-presence in the public arena
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper reports on work carried out within the Cityware project using mobile technologies to map, visualise and project the digital co-presence in the city. This paper focuses on two pilot studies exploring the Bluetooth landscape in the city of Bath. Here we apply adapted and ‘digitally augmented’ methods for spatial observation and analysis based on established methods used extensively in the space syntax approach to urban design. We map the physical and digital flows at a macro level and observe static space use at the micro level. In addition we look at social and mobile behaviour from an individual’s point of view. We apply a method based on intervention through ‘Sensing and projecting’ Bluetooth names and digital identity in the public arena. We present early findings in terms of patterns of Bluetooth flow and presence, and outline initial observations about how people’s reaction towards the projection of their Bluetooth names practices in public. In particular we note the importance of constructing socially meaningful relations between people mediated by these technologies. We discuss initial results and outline issues raised in detail before finally describing ongoing work.
keywords	Pervasive systems, digital presence, urban encounter, digital identity
series	DDSS
last changed	2008/09/01 17:06

_id	ijac20076204
id	ijac20076204
authors	Schlueter, Arno; Bonwetsch, Tobias
year	2008
title	Design Rationalization of Irregular Cellular Structures
source	International Journal of Architectural Computing vol. 6 - no. 2, pp. 197-211
summary	Complex geometries found in nature are increasingly used as images and analogies for the creation of form and space in architectural design. To be able to construct the resulting complex building forms, strategies to handle the resulting production requirements are necessary. In the example of a design project for a Japanese noodle bar, a strategy for the realization of an irregular cellular spatial structure is presented. In order to represent its complex geometry, building principles relating to foam are applied to transform and optimize the design, which is based on hexagonal, cellular compartments defining the different interior spaces. The principles are converted into software code and implemented into a digital design toolbox to be used within a 3D-modelling environment. Utilizing the tools within the redesign process made a rationalization of the cellular structures possible without sacrificing the desired visual irregularity. The toolbox also enables the extraction of the cell geometry to support the generation of production documents. The result is the dramatic reduction of production effort to realize the complex cellular structures by keeping a maximum of design flexibility and desired visual appearance.
series	journal
last changed	2008/10/01 21:49

_id	acadia08_376
id	acadia08_376
authors	Silver, Mike
year	2008
title	The Most Important Airplane In The History Of Architecture
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 376-381
doi	https://doi.org/10.52842/conf.acadia.2008.376
summary	Composite structures consist of high strength carbon threads held together in a matrix of epoxy resin or thermoplastics. Surfaces made from these materials are typically 10 times lighter and 1.5 times stronger than aluminum. Both simple and highly contoured shapes possessing extreme strength can be produced using a computer controlled fiber placement machine (FPM). These incredibly thin, corrosion resistant membranes require little or no supplemental support to manage loads and enclose space. The computer’s ability to determine the precise location of each fiber strand in a fiber placed part also facilitates unprecedented control of its aesthetic and functional properties. Fiber placement technology integrates building components that would normally be separated into clearly distinct systems. Here ornament, structure and cladding are collapsed into one material process. This paper explores the architectural potential of a technology normally reserved for aerospace applications through research conducted in close collaboration with fiber placement engineers at Automated Dynamics in Schenectady, New York (ADC).
keywords	Composite; Digital Fabrication; Fiber; Skin; Structure
series	ACADIA
last changed	2022/06/07 07:56

_id	ddss2008-12
id	ddss2008-12
authors	Tabak, V.; B. de Vries, J. Dijkstra
year	2008
title	Validating an office simulation model using RFIDtechnology
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents the validation of an office utilisation model for the research project called “User Simulation of Space Utilisation (USSU)”. The result of this research is a system that can be used for analysing and evaluating the space utilisation of a building for any given organisation. A system for building usage simulation that produces data about activities of members of an organisation can substantially improve the relevance and performance of building simulation tools. This is relevant for engineering domains as well as for architects to evaluate the performance of a building design. For a thorough evaluation of the system an experiment was executed for assessing its predictive quality in the context of a real building, organisation and actual human behaviour; this experiment was executed using RFID technology. The result of the experiment was observed data about the space utilisation of the selected organisation. These data were compared with the space utilisation predicted by the USSU system to evaluate the simulation model. The validation of USSU showed that there were no significant differences between the predicated and observed activity behaviour. As a consequence, the output of USSU is considered to be valid.
keywords	Office utilisation simulation, building simulation system, validation, RFID, space utilisation
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2018_033
id	caadria2018_033
authors	Bai, Nan and Huang, Weixin
year	2018
title	Quantitative Analysis on Architects Using Culturomics - Pattern Study of Prizker Winners Based on Google N-gram Data
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 257-266
doi	https://doi.org/10.52842/conf.caadria.2018.2.257
summary	Quantitative studies using the corpus Google Ngram, namely Culturomics, have been analyzing the implicit patterns of culture changes. Being the top-standard prize in the field of Architecture since 1979, the Pritzker Prize has been increasingly diversified in the recent years. This study intends to reveal the implicit pattern of Pritzker Winners using the method of Culturomics, based on the corpus of Google Ngram to reveal the relationship of the sign of their fame and the fact of prize-winning. 48 architects including 32 awarded and 16 promising are analyzed in the printed corpus of English language between 1900 and 2008. Multiple regression models and multiple imputation methods are used during the data processing. Self-Organizing Map is used to define clusters among the awarded and promising architects. Six main clusters are detected, forming a 3×2 network of fame patterns. Most promising architects can be told from the clustering, according to their similarity to the more typical prize winners. The method of Culturomics could expand the sight of architecture study, giving more possibilities to reveal the implicit patterns of the existing empirical world.
keywords	Culturomics; Google Ngram; Pritzker Prize; Fame Pattern; Self-Organizing Map
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

For more results click below: