Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2011_058
id	ecaade2011_058
authors	Schindler, Christoph; Espinosa, Margarita Salmerón
year	2011
title	ZipShape Mouldless Bending II: A Shift from Geometry to Experience
doi	https://doi.org/10.52842/conf.ecaade.2011.477
source	RESPECTING FRAGILE PLACES [29th eCAADe Conference Proceedings / ISBN 978-9-4912070-1-3], University of Ljubljana, Faculty of Architecture (Slovenia) 21-24 September 2011, pp.477-484
summary	“ZipShape is a universal method to fabricate single curved panels from any plain material without moulds” was the first statement of a paper presented at the Antwerp eCAADe conference in September 2008 (Schindler, 2008). In contrast, the paper at hand introduces ZipShape as a highly specific composite combining different materials and their characteristics. Between those two texts, a paradigm shift took place – from abstract geometrical concept to experiencing the inseparable relation of form and material behaviour. This second step of ZipShape-research was initiated by Swiss design office schindlersalmerón through several workshops with Fachschule für Holztechnik Hamburg, CITA at Royal Academy of the Fine Arts Copenhagen, Bern University of Applied Sciences BFH–AHB Biel and The Detmold School of Architecture and Interior Design.
wos	WOS:000335665500055
keywords	Mouldless Bending; Wood; Parametric Modelling; Digital Fabrication; Unrolling
series	eCAADe
email
last changed	2022/05/01 23:21

_id	ddss2008-45
id	ddss2008-45
authors	Van der Waerden, Peter; Antônio Nélson Rodrigues da Silva, Harry Timmermans, Mike Bérénos & Gustavo Rennó Rocha
year	2008
title	Public Transport Planning Evaluation Tools and theirData Requirements and Availability
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper describes two different public transport planning evaluation tools that are used to support planning activities in The Netherlands and Brazil. In the paper extra attention is paid to data requirements and availability. The Dutch tool generates so-called Public Transport Potential Maps that present the potential of public transport at the level of 6-digit postal code zones based on area and public transport related characteristics. With the Brazilian tool, existing and new implemented public transport routes can be evaluated. To identify urban features that influence the performance of the public transport system, the tool compares characteristics of the urban spaces with the different typologies of public transport routes. Examples of the use of both tools including data requirement and availability are shown in this paper, stressing the fact that GIS is currently an essential and universal tool for public transportation planning, despite the conditions of the site and the complexity of the model under analysis.
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2018_033
id	caadria2018_033
authors	Bai, Nan and Huang, Weixin
year	2018
title	Quantitative Analysis on Architects Using Culturomics - Pattern Study of Prizker Winners Based on Google N-gram Data
doi	https://doi.org/10.52842/conf.caadria.2018.2.257
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 257-266
summary	Quantitative studies using the corpus Google Ngram, namely Culturomics, have been analyzing the implicit patterns of culture changes. Being the top-standard prize in the field of Architecture since 1979, the Pritzker Prize has been increasingly diversified in the recent years. This study intends to reveal the implicit pattern of Pritzker Winners using the method of Culturomics, based on the corpus of Google Ngram to reveal the relationship of the sign of their fame and the fact of prize-winning. 48 architects including 32 awarded and 16 promising are analyzed in the printed corpus of English language between 1900 and 2008. Multiple regression models and multiple imputation methods are used during the data processing. Self-Organizing Map is used to define clusters among the awarded and promising architects. Six main clusters are detected, forming a 3×2 network of fame patterns. Most promising architects can be told from the clustering, according to their similarity to the more typical prize winners. The method of Culturomics could expand the sight of architecture study, giving more possibilities to reveal the implicit patterns of the existing empirical world.
keywords	Culturomics; Google Ngram; Pritzker Prize; Fame Pattern; Self-Organizing Map
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ddss2008-09
id	ddss2008-09
authors	Bates-Brkljac, N.
year	2008
title	Towards client-focused architectural representationsas a facilitator for improved design decision-makingprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper focuses on architectural representations as a means of communicating design schemes in the process of decision-making. It reports on the study, which investigated people’s responses to different forms of architectural representations. The paper starts with the discussion about participation in decision-making process and the potential benefits of using computer generated representations. Then, it describes the research study and examines results of the investigation. In the final section it is argued that client focused architectural representations are needed to support the exchange of views and discussion amongst different stakeholders in order to reduce the requirement for trained interpretation and encourage the participation in the decision making process.
keywords	Architectural representations, Perceived credibility, Design decision making
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_055
id	ecaade2008_055
authors	Beirão, José; Duarte, José; Stouffs, Rudi
year	2008
title	Structuring a Generative Model for Urban Design: Linking GIS to Shape Grammars
doi	https://doi.org/10.52842/conf.ecaade.2008.929
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 929-938
summary	Urban Design processes need to adopt flexible and adaptive procedures to respond to the evolving demands of the contemporary city. To support such dynamic processes, a specific design methodology and a supporting tool are needed. This design methodology considers the development of a design system rather than a single design solution. It is based on patterns and shape grammars. The idea is to link the descriptions of each pattern to specific shape rules inducing the generation of formal solutions that satisfy the pattern. The methodology explores, from the urban designer point of view, the capacity of a shape grammar to codify and generate urban form (Duarte et al, 2007). This paper defines the ontology of urban entities to build on a GIS platform the topology describing the various components of the city structure. By choosing different sets of patterns the designer defines his vision for a specific context. The patterns are explicated into shape rules that encode the designer’s interpretation of the pattern, and operate on this ontology of urban entities generating solutions that satisfy the pattern’s concept. Some examples of the topological relations are shown.
keywords	Patterns, shape grammars, ontology, generative urban design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2008_083
id	ecaade2008_083
authors	Belcher, Daniel; Johnson, Brian R.
year	2008
title	ARchitectureView
doi	https://doi.org/10.52842/conf.ecaade.2008.561
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 561-568
summary	We present a system for viewing architectural building models – specifically Building Information Modeling (BIM) models – in 3D using an Augmented Reality Tangible User Interface (TUI) and a Magic Lens interaction metaphor. ARchitectureView is meant to facilitate communication and collaboration around a shared model. We present the system overview and a number of use scenarios in which the interface would serve to improve communication across disciplines and varied technical backgrounds, while supporting a rich and coherent common understanding.
keywords	Augmented Reality, Building Information Modeling, Magic Lens, Tangible User Interface
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-36
id	ddss2008-36
authors	Burger, J.; R.P. de Graaf, and G.J. Helmerhorst
year	2008
title	Dynamic Actor Network Steering And ControlManaging Actor Networks In The Construction Process
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
keywords	Multi-actor, network planning, critical path, linear programming
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_198
id	ecaade2008_198
authors	Crotch, Joanna; Mantho, Robert
year	2008
title	Media, Technology and Teaching
doi	https://doi.org/10.52842/conf.ecaade.2008.293
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 293-300
summary	With the growing reliance on technology and other visual media to explore architectural ideas, has architectural pedagogy realigned itself with the evolving possibilities of the new technological age? With the above in mind, we designed a program to explore and test this question. The programs encouraged experimentation and speculation. Technology was seen to be central to the program. The starting point was the selection of an activity. Each stage of the process required the student to firstly, carefully observe, then to create an image utilizing different ‘medium’ to realize their observations. The chosen mediums were cubism, movie making and digital imaging. Conventional plans and sections were required to be made of each final outcome, of each stage. As part of and in response to each progressive stage, a space to house an element of the activity was designed. The concluding part required the design of a small urban building to accommodate the activity selected.
keywords	Pedagogy, Architecture, Technology, Spatialization, Exploration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2008_62_session6a_510
id	caadria2008_62_session6a_510
authors	Diniz, Nancy
year	2008
title	Body tailored space: Configuring Space through Embodiment
doi	https://doi.org/10.52842/conf.caadria.2008.510
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 510-517
summary	With this project I propose that embodiment can be more emphasized and better supported in space-design frameworks. This paper presents background on several theories of embodiment since the beginning of the twentieth century to recent developments of the concept in tangible and social computing and anticipate that this reveals pathways for designing new embodiment framework systems for architecture. I suggest that architecture and interactive computing can share a common theoretical foundation in embodied interaction. The main thesis is for designers to use the body as an interface to understand how the interaction between a person and his/her surroundings arises and how our embodiment reveals other rich spatial qualities during the conception phase of design. This paper proposes a conceptual framework for embodied interaction based on the creation of real-time systems in order to instigate a framework for interactive processes that can help designers understand architecture phenomena and the performance of space. I present a design experiment on embodied performance space entitled “Body Tailored Space” where the boundaries of the human body are metaphorically extended into surrounding membranes.
keywords	Embodiment; embodied interaction; interactive architecture; phenomenology; second order cybernetics
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia08_034
id	acadia08_034
authors	Díaz Moreno, Cristina; Efrén García Grinda
year	2008
title	ATMOSPHERE: Material for the digital gardener
doi	https://doi.org/10.52842/conf.acadia.2008.034
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 34-37
series	ACADIA
last changed	2022/06/07 07:55

_id	ecaade2008_086
id	ecaade2008_086
authors	Elsen, Catherine; Juchmes, Roland; Kubicki, Sylvain; Leclercq, Pierre
year	2008
title	DCDS – Distant Collaborative Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2008.325
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 325-332
summary	This paper introduces new supporting tools in the field of distant collaborative design, namely DCDS and CRTI-weB. These prototypes respectively support: the early stages of design, through the support of the crucial initial step of free-hand sketches shared in real-time, and the asynchronous collaborative activities. The main goal of this paper is to propose the use of these innovative tools as an efficient and realistic way of managing long distance collaboration, to effectively serve the designers’ needs. This proposition is analyzed and addressed through a real-size experiment featuring 30 architecture and architectural-engineering students, working together in real-time at different locations (Belgium and France). This experiment and the necessary survey open up interesting fields of investigation, such as the relevance of the proposed services in supporting distant collaborative design in architecture and the benefit this represents for students to merge the IT aspects and the design studio. The methodology and the replicability are analyzed to increase the level and quality of formation of our students and, finally, a criticism of the tools confirms a benefit for the developing teams.
keywords	Distant collaborative design, sketch support systems, asynchronous collaborative activities
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2008_184
id	ecaade2008_184
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Fritz, Oliver; Rüdenauer, Kai; Lemmerzahl, Steffen
year	2008
title	Form Follows Structure?
doi	https://doi.org/10.52842/conf.ecaade.2008.451
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 451-458
summary	This paper can be viewed as the continued development of a research project presented at last year’s eCAADe. The project focused on the potential and possibilities of cooperation among architects, investors with concrete building projects, and researchers at the university level working on generative design and parametric construction. After having spent several years of research on design techniques in a purely academic setting at the university we see, contrary to our fears, that reality and the integration of concrete factors such as budget, time management, etc. does not diminish but rather improves the quality of our work. This work is not primarily concerned with the development of a new architectural language but the intelligent use of modern computer technology based on digitized planning processes defined as ‘complex building design’. Designs developed in this manner can be distinguished by certain characteristics, the evaluation of which is a point critically discussed in the following paper.
keywords	Generative Design, Collaborative Design, Parametric Design, User Participation in Design, Case Study, Strategic Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2008_18_session3a_153
id	caadria2008_18_session3a_153
authors	Gero, John S.; Kazjon S. Grace, Robert Saunders
year	2008
title	Computational Analogy-Making in Designning: A Process Architecture
doi	https://doi.org/10.52842/conf.caadria.2008.153
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 153-160
summary	This paper presents a model of computational analogy-making in designing based on the notion of situated similarity. Situated similarity is the idea that the relationship between two concepts is dependent not only on what the agent knows about those concepts but also on the way the agent is looking at them. Analogy-making is modelled as three interacting processes: formulation, matching and mapping. The model is developed and then its implications for developing situated analogy-making systems in design are discussed.
keywords	Analogy-making; situatedness; similarity; designing
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia08_182
id	acadia08_182
authors	Gibson, Michael; Kevin R. Klinger; Joshua Vermillion
year	2008
title	Constructing Information: Towards a Feedback Ecology in Digital Design and Fabrication
doi	https://doi.org/10.52842/conf.acadia.2008.182
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 182-191
summary	As strategies evolve using digital means to navigate design in architecture, critical process-based approaches are essential to the discourse. The often complex integration of design, analysis, and fabrication through digital technologies is wholly reliant upon a process-basis necessitating the use of a design feedback loop, which reinforces critical decision-making and challenges the notions of how we produce, visualize, and analyze information in the service of production and assembly. Central to this process-based approach is the effective and innovative integration of information and the interrogation of material based explorations in the making of architecture. This fabrication ‘ecology’ forces designers to engage complexity and accept the unpredictability of emergent systems. It also exposes the process of working to critique and refine feedback loops in light of complex tools, methods, materials, site, and performance considerations. In total, strategies for engaging this ‘ecology’ are essential to accentuate our present understanding of environmental design and theory in relation to digital processes for design and fabrication. ¶ This paper recounts a design/fabrication seminar entitled “Constructing Information” in which architecture students examined an environmental design problem by way of the design feedback loop, where their efforts in applying digital design and fabrication methods were driven explicitly by material and site realities and where their work was executed, installed, and critically explored in situ. These projections raise important questions about how information, complexity, and context overlay and merge, and underscore the critical potential of visual, spatial, and material effects as part of a fabrication-oriented design process.
keywords	Digital Fabrication; Ecology; Environment; Feedback; Performance
series	ACADIA
last changed	2022/06/07 07:51

_id	ecaade2008_048
id	ecaade2008_048
authors	Gün, Onur Yüce
year	2008
title	Anti UV: Progressive Component Design in Cross Platforms
doi	https://doi.org/10.52842/conf.ecaade.2008.069
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 69-76
summary	The executive power of computation, once utilized to inform the discrete pieces of design, ‘component making’ rapidly became one of the trends in architectural design. Idea of components conceptually transformed the enclosing forms of architecture into subdivision surfaces that act as fields for components to aggregate on. While a certain level of variety is achieved via manipulation of components, the characteristics of the surfaces become overlooked via common use of parametric (UV) subdivision. This paper, with a critical look at the current component field generation techniques, focuses on alternative methods of transforming a surface into a digital ground for component aggregation. Series of studies address and deal with various pitfalls of component design and application on software-dictated UV subdivision surfaces.
keywords	Computation, Components, Emergent, Generative, Progressive
series	eCAADe
email
last changed	2022/06/07 07:49

_id	236c
id	236c
authors	Hamuy Pinto, Eduardo; Galaz Lorca, Mirtha
year	2008
title	Evaluación de Participación e Interacción en LMS MOODLE [Assessment of Participation and Interaction in LMS MOODLE]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008, pp. 164-167.
summary	Learning Management Systems (LMS) embody spaces that combine Virtual Classrooms, learning communities, repositories of educational resources and communication devices. The use by faculty members and students, in a campus containing the schools of Architecture, Design and Geography, of Open Source LMS MOODLE, during the years 2005-2006, was assessed. An analysis of the Digital Vestiges, the metadata in the logs database, distinguished between the levels of informative and communicational interaction. The results draw attention to a trend, similar to previous measurements in Latin America, of more use of ICT educational resources for informational purposes than communicational interactions between teachers and students.
keywords	LMS, MOODLE, Meaningful Interactions
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:53

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
wos	WOS:000372316000043
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	ecaade2008_187
id	ecaade2008_187
authors	Kotsopoulos, Sotirios D.
year	2008
title	Designing with n Partial Descriptions
doi	https://doi.org/10.52842/conf.ecaade.2008.437
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 437-444
summary	Visual production rules and multiple graphic layers containing fragmentary graphic information are used to generate design descriptions from scratch. The rules are expressed by the means of shape grammar formalism. Two graphic examples of calculations with shapes made out of lines are presented.
keywords	Product algebra, shape rule, partial description, juxtaposition
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2008_009
id	ecaade2008_009
authors	Lyon , Eduardo R.
year	2008
title	Knowledge Based Design and Digital Manufacturing:
doi	https://doi.org/10.52842/conf.ecaade.2008.625
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 625-632
summary	This research explores new ways to integrate manufacturing knowledge in to design phases. Through the use of design for manufacturing (DfM) concept, and looking at relations between its potential application in component design and its implementation using digital manufacturing technologies, the author implemented a DfM model that varies from previous models by incorporated learning in the process. This process was based on the incremental development and refinement of design heuristics and metrics. The DfM model developed in this research is a process model to be implemented as a framework within educational settings. The final purpose is to provide better foundational constructs for design education and to improve teaching approaches that integrate design and manufacturing.
keywords	Design Computing, Design for manufacturing, Knowledge Based Design, Digital Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: