Advanced search Recent papers Author index Keyword index Browse by series Help Desk About

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures
PDF papers
References

Hits 1 to 20 of 444

Reformat results as: short   short into frame   detailed   detailed into frame  

_id ascaad2012_003
id ascaad2012_003
authors Elseragy, Ahmed
year 2012
title Creative Design Between Representation and Simulation
source CAAD | INNOVATION | PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series ASCAAD
email
more http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed 2012/05/15 20:46
_id ecaade2015_265
id ecaade2015_265
authors Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year 2015
title Digital Design for Disassembly
source Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi https://doi.org/10.52842/conf.ecaade.2015.2.371
wos WOS:000372316000043
summary The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series eCAADe
email
more https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed 2022/06/07 07:50
_id acadia11_152
id acadia11_152
authors Rael, Ronald; San Fratello, Virginia
year 2011
title Developing Concrete Polymer Building Components for 3D Printing
source ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 152-157
doi https://doi.org/10.52842/conf.acadia.2011.152
summary The creation of building components that can be seen as sustainable, inexpensive, stronger, recyclable, customizable and perhaps even reparable to the environment is an urgent, and critical focus of architectural research. In the U.S. alone, the construction industry produced 143.5 million tons of building-related construction and demolition debris in 2008, and buildings, in their consumption of energy produce more greenhouse gasses than automobiles or industry.Because the inherent nature of 3D printing opens new possibilities for shaping materials, the process will reshape the way we think about architectural building components. Digital materiality, a term coined by Italian and Swiss architects Fabio Gramazio and Matthias Kohler, describes materiality increasingly enriched with digital characteristics where data, material, programming and construction are interwoven (Gramazio and Kohler, 2008). The research aspires towards this classification through the use of parametric modeling tools, analytic software and quantitative and qualitative analysis. Rapid prototyping, which is the automatic construction of physical objects using additive manufacturing technology, typically employs materials intended for the immediate analysis of form, scale, and tactility. Rarely do the materials used in this process have any long-term value, nor does the process - except in rare cases with expensive metal prototyping - have the ability to create actual and sustainable working products. This research intends to alter this state of affairs by developing methods for 3D printing using concrete for the production of long-lasting performance-based components.
series ACADIA
type work in progress
email
last changed 2022/06/07 08:00
_id sigradi2008_080
id sigradi2008_080
authors Andrés, Roberto
year 2008
title Hybrid Art > Synthesized Architecture
source SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series SIGRADI
email
last changed 2016/03/10 09:47
_id acadia08_472
id acadia08_472
authors Key, Sora; Mark D Gross; Ellen Yi-Luen Do
year 2008
title Computing Spatial Qualities For Architecture
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 472-477
doi https://doi.org/10.52842/conf.acadia.2008.472
summary Computational representation of spatial qualities can lead us to a better understanding of how we construct spatial concepts. Analyses of spatial qualities can support architects in reasoning about the form of a configuration, helping them predict the consequences of a design. ¶ In this paper we present three definitions (enclosure, viewfield, continuity) that describe experiential qualities of architectural spaces. Our project aims to provide computable definitions to these qualities to describe common spatial experiences that are implicitly understood by architects. The description, using familiar terms, reveals the analytical structure of spatial qualities that is based on the geometry of the physical elements. ; We therefore introduce a graphic editor, Descriptor, that provides visualization of spatial qualities as the designer diagrams building elements. The system calculates perceived relationships (surrounded, visible, nearby, nearest) between a viewpoint and the architectural elements based on their geometric properties such as location and distance. The relationships are the components of the three qualities we define. We also present a use scenario to demonstrate how one might use our Descriptor system during early design. ¶ Descriptor is an attempt to formalize descriptions of the spatial qualities to help beginners understand how to make design decisions. In the future, we plan to extend the set of qualities and add detailed attributes of the physical elements to the system.
keywords Analysis; Computation; Environment; Representation; Spatial
series ACADIA
last changed 2022/06/07 07:52
_id acadia08_406
id acadia08_406
authors Lee, Yungil; Jumphon Lertlakhanakul ;Jinwon Choi; Yehuda E. Kalay
year 2008
title Dynamic Architectural Visualization Based On User-Centered Semantic Interoperability
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 406-415
doi https://doi.org/10.52842/conf.acadia.2008.406
summary Technically-oriented architectural spaces today are getting complicated because the building contains a number of electronic facilities and complex structures. Furthermore, the advent of the ubiquitous environment enabled the building to provide various services to users and accelerated the importance of architectural visualization as problem-solving and communicating tools. It is recommended that architectural visualization has been more intuitive and effective to support the design decision and collaboration. In this manner, this paper intends to define the role of current architectural visualization with considerations of previous research and related works in the practical field and proposes the appropriate method of architectural visualization. Also, in order to evaluate our idea, we recommend a prototype system based on dynamic and semantic representation with the avatar. It is a kind of simulator for the design of ubiquitous smart space and can deliver to users the better comprehension in how technological oriented space will be constructed and utilized.
keywords Interoperability; Semantic; Ubiquity; User; Visualization
series ACADIA
last changed 2022/06/07 07:52
_id ecaade2008_190
id ecaade2008_190
authors Russell, Peter; Elger, Dietrich
year 2008
title The Meaning of BIM
source Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 531-536
doi https://doi.org/10.52842/conf.ecaade.2008.531
summary The paper is a position paper, not a report about a research project. It concerns the paradigm-shift that is taking place in the CAAD software and its implications for the business of architecture and more importantly, for the education of future members of the profession. Twenty years ago the use of CAAD software as a replacement for hand drafting was starting. Since then the transformation is complete: hardly a final project in the universities is drawn by hand. Currently, we are witnessing a second paradigm shift and its name is BIM. The meaning of BIM is rooted in two significant differences to current CAAD software and this will have implications for teaching and practicing architecture. The first difference is the way the software structures information in the CAAD file. The standard way to save CAAD information was to organise simple geometric objects according to membership in groups and to sort them according to a layer-metaphor, which primarily controlled the visibility of the geometric elements. Three-dimensional modelling is/was nothing more than the same structure with a more complex geometry. BIM software changes this structure by storing classes of geometries and then to store the specific values of individual geometries according to factors that can be determined by external or internal logical factors. The implication for architects is that we have the chance to be the people in control of the building information model, so long as we invest the time and energy to fully understand what is happening to the building information during the planning process. If we ignore this, the real danger exists that the last control of the building’s final configuration will be usurped. As educators we are currently teaching students that will be leaving the schools in 2012 and beyond. By then, the paradigm-shift will be in full motion and so it behoves us to consider which skill sets we want the next generation of architects to possess. This means not just teaching students about how to use particular BIM software or how to program a certain parametric/genetic algorithm in a form-finding process. We need to teach our students to take the leadership in building information management and that means understanding and controlling how the building information flows, how the methodologies that are used by the consulting engineers affect our building models, and knowing what kind of logical inconsistencies (internal or external) can threaten the design intention.
keywords Building Information Modelling, Digital Curriculum, Architectural Pedagogy
series eCAADe
email
last changed 2022/06/07 07:56
_id acadia05_200
id acadia05_200
authors Tsou, J.-Y., Chan Yi Lee, Mak Kwok Pui, Ru Xu Du, Liang Jian, Yeung Kim
year 2005
title Applying Scientific Simulation to Integrate Thermoelectric Conductor Module into Architectural Design – Smart Wall for Thermal Comfort
source Smart Architecture: Integration of Digital and Building Technologies [Proceedings of the 2005 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 0-9772832-0-8] Savannah (Georgia) 13-16 October 2005, pp. 200-210
doi https://doi.org/10.52842/conf.acadia.2005.200
summary This paper presents the innovative architectural design concept, which is to integrate the new material and technology into the building design to achieve the thermal comfort and at the same time reduce the energy consumption of the building by making use of the renewable energy, including solar and wind energy. The system is developed based on the idea of regional thermal comfort in building. The advantage of the system is the environmental friendly approach, costless operation, reliability, flexibility, scalability and adaptability for the integration to the building design. With the design concept, we tried to do two application designs in two virtual sites. One is a badminton court for the 2008 Beijing Olympic Games and the other is a cooling pond in a shopping mall. We will introduce how computational simulation can contribute to the prediction of the performance of the design. We will also discuss how the computation simulation can help in the design optimization process. Through the development of the new design integration of the material to the building, we would like to feedback to the material industry to encourage further collaboration and development in the material enhancement, so that both industries and the society can benefit from the advancement.
series ACADIA
email
last changed 2022/06/07 07:57
_id acadia08_370
id acadia08_370
authors Wallick, Karl
year 2008
title Digital and Manual Joints
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 370-375
doi https://doi.org/10.52842/conf.acadia.2008.370
summary This paper considers the problem of detailing joints between manual and digital construction by tracking the provocations of KieranTimberlake’s SmartWrap research and the evolution of that knowledge into practical architectural instruments that can be deployed into more traditional construction projects. Over the past several years, KieranTimberlake Associates in Philadelphia has undertaken a path of research focusing on problems of contemporary construction systems and practices. One product of this research was a speculative wall system assembled for a museum exhibit. SmartWrap was to be a digitally prefabricated wall system with embedded technology. ¶ While they have yet to wrap a building with SmartWrap, KieranTimberlake have utilized a number of the construction principles and digital tools tested in the SmartWrap exhibit. One of the most important principles, prefabrication, was explored in a fast-track construction project at the Sidwell Friends School. The compressed schedule drove the design of an enclosure system which incorporated performative elements in similar categories to SmartWrap: insulation, an electrical system, view, daylighting, and a rainscreen. Besides being a prefabricated façade system, the rainscreen detailing became a formal system for organizing many other scales of the project including: site systems, thermal systems, daylighting systems, enclosure, and ornament. At a second project, a similar wood rainscreen strategy was used. However, at the Loblolly House the question of prefabrication and digital modeling was tested far more extensively: thermal systems were embedded into prefabricated floor cartridges, entire program elements – a library, kitchen, and bathroom were proposed as prefabricated systems of self-contained volume and infrastructure which were then inserted into the on-site framework. ; In all three projects the joint between manual-imprecise construction and digital-precise prefabrication became the area of richest invention (Figure 1). SmartWrap may not have yielded flexible, plastic architecture; but its conceptual and practical questions have yielded tangible implications for the design/construction processes and the built product in KieranTimberlake’s practice.
keywords Construction; Design; Integrative; Prefabrication; Skin
series ACADIA
last changed 2022/06/07 07:58
_id acadia08_066
id acadia08_066
authors Ahlquist, Sean; Moritz Fleischmann
year 2008
title Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
doi https://doi.org/10.52842/conf.acadia.2008.066
summary A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords Biology; Computation; Material; Parametric; System
series ACADIA
last changed 2022/06/07 07:54
_id acadia08_088
id acadia08_088
authors Hynes, Hugh
year 2008
title When The Going Gets Tough, The Pluripotent Get Going: Resilient Developmental Models
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 88-93
doi https://doi.org/10.52842/conf.acadia.2008.088
summary Mechanisms of biological development, such as in embryogenesis, offer promising models for resilient architectural systems well-suited to volatile or unpredictable contextual conditions. The resilience of embryonic development as a process is such that successful development—“success” defined here as that which results in the birth of an organism that can survive—can sustain extreme shifts in a normal developmental process, triggered by mutations, environmental pressures, injury, or experimental intervention. More specifically, biological development combines mechanisms of standardization with mechanisms of customization to create open-ended or what biologists call pluripotent systems—poised (“-potent”) to develop into a wide range (“pluri-”) of potential forms—which we can endeavor to reproduce mimetically. ¶ This paper considers biomimesis less a matter of replicating these developmental mechanisms physically or formally, but rather borrowing aspects of the mechanisms’ operation in order to test project outcomes digitally. The discipline of developmental biology affords a virtually ready-made conceptual framework and terminology to guide an open-ended digital methodology, in the hope of incorporating increasing degrees of resilience into the resulting design work. Searching for a capacity to sustain a similar fluidity of differentiation afforded by organisms in early development, we explore a pluripotent architecture for which differentiation might occur over time, and which might be better able to absorb volatility.
keywords Adaptation; Differentiation; Morphogenesis; Resilience; Scenario
series ACADIA
last changed 2022/06/07 07:50
_id cf2011_p127
id cf2011_p127
authors Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year 2011
title Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called “gingerbread houses”, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series CAAD Futures
email
last changed 2012/02/11 19:21
_id ddss2008-33
id ddss2008-33
authors Charlton, James A.; Bob Giddings and Margaret Horne
year 2008
title A survey of computer software for the urban designprocess
source H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series DDSS
last changed 2008/09/01 17:06
_id sigradi2008_012
id sigradi2008_012
authors Dokonal, Wolfgang
year 2008
title What is the state of digital architectural design?
source SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary What is the state of digital architectural design? The ubiquity of the computer in architecture can be seen in the many computer based presentations from famous architectural practices. BIM (Building Information Modelling) is the key word and we can see implementations in very ambitious projects all over the world. Glossy magazines show the results of this kind of architecture and predict that this is the future of our profession. But when we go out into the “small world” (in Europe) and talk with architects in small firms, there is a very different reality – at least at the moment. Although they all agree that the computer is crucial for their work, it is a love/hate relationship for many them. Most still use the computer purely as a drafting device and AutoCAD is still the dominant tool. Although many of them agree with the statement that you can use the computer for design, only a minority really use the computer as a design tool in the early design stages. To find out more about the reality of the use of computers in design in “small town Europe” we have been undertaking two different kinds of research over the past 4 years. The first one is an educational experiment using first year’s students to find out about the different qualities of designing with and without the computer. The results have been presented at previous conferences and, since we are doing a last run of these experiments this year, we will update and finalise our findings in this paper. To make it comparable to previous years, we use largely the same settings using the same type of student (first year) and the same project/site. We will also be comparing the results for students designing ‘freestyle’ ie in the way that they want against the previous years controlled groups. The second strand of research we have followed is a survey amongst practitioners and some of the above statements came out of this survey. We did this survey using a web questionnaire and focused on a particular region of Europe. Although the numbers of participants for this survey were quite satisfying we are re-running the survey in a different region and country to see whether there are significant differences. The results of our research and our experience as teachers and architects leads us to the main question of how we can give recommendations on how to teach design the new generation of architects. In many aspects most of the teaching that is done in our faculties is still strictly divided into teaching design and teaching computer skills. The crucial question for architectural education are the implications of the ubiquity of the computer will have especially in the field of design. We will try to give some suggestions for these effects this could have on our teaching. In the long run, this is the only way to avoid some of the pitfalls and bring the benefits of computers in design to our small architectural firms. The paper will present a summary of the results of our research and try to propose an answer to the question: “What is the state of digital design in small town Europe?”
series SIGRADI
email
last changed 2016/03/10 09:50
_id cdc2008_111
id cdc2008_111
authors Dounas, Theodore
year 2008
title Algebras, Geometries and Algorithms, Or How Architecture fought the Law and the Law Won
source First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 111-114
summary An Architect is required to deal quite often with a restrictive piece of Building Code during his/her practice, especially in traditional and hence protected environments. The paper examines the algorithmic nature of such a Building Code and in particular the President's Decree governing the design and architecture of traditional housing in the Old Town, “Ano Poli”, in Thessaloniki Greece. The nature of the constraints and descriptions the Decree contains is algorithmic, which means that the descriptions of the constraints is procedural with a specific start and a specific finish for a house design. The problem with such descriptions in a Law is that, although an architect can develop his/her own interpretations of the traditional language of the area, or even be able to trace his/her designs using shape grammars derived from traditional buildings preserved until today, the final result cannot be approved for a building permit since it does not comply with the Presidential Decree. We suggest that the nature of such legislation should be algebraic in nature and not algorithmic, since algebras allow an amount of freedom in development of architectural language while also permitting the restriction of scale, height and so on. This coupling of architectural design freedom and effective restriction on metrics of new buildings contained in algebraic systems can be shown to be much more effective than the established algorithmic system. The Decree's content comprises of regulations concerning the volume, form and use of new buildings in the protected and conserved built environment of “Ano Poli” in Thessaloniki.
last changed 2009/01/07 08:05
_id ddss2008-30
id ddss2008-30
authors Hemmerling, Marco
year 2008
title Digital MaterialPerception, Interaction and Immersion in Virtual Environments
source H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary This paper outlines two major aspects of virtual environments for architectural design. On the one hand it focusses on how to use virtual reality as an extended tool to generate spatial design by building up and interacting with a three-dimensional digital model. On the other hand it describes - based on a case study - the relation between perception, interaction and immersion in virtual environments. Both approaches can be interconnected to a continues design process, that allows the designer to create, manipulate, visualize and decide on spatial concepts in a holistic three-dimensional simulation.
keywords Virtual Environment, Digital Architecture, Immersion, Perception, Human-Computer Interaction
series DDSS
last changed 2008/09/01 17:06
_id cf2011_p108
id cf2011_p108
authors Iordanova, Ivanka; Forgues Daniel, Chiocchio François
year 2011
title Creation of an Evolutive Conceptual Know-how Framework for Integrative Building Design
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 435-450.
summary Low productivity of the building sector today is attributed to the fragmentation of tasks, disciplines and responsibilities, as well as to the resistance to adopt integrative work processes and digital means. The increased complexity of architectural projects and the aroused social consciousness for sustainable environment calls for integrative design collaboration. Thus, there is need for a Conceptual Framework combining work processes, technological means and policy aspects. According to the literature, integrative multidisciplinary design is a strategy resulting in high performance buildings nurturing sustainable way of living (Reed et al. 2009, Krygiel & Nies 2008). Responding to the increased technological complexity of our built environment, as well as to the objective of meeting multiple criteria of quality, both necessitating multidisciplinary collaboration during design, Building Information Modeling (BIM) is seen as a powerful means for fostering quality, augmenting productivity and decreasing loss in construction. Based on recent research, we can propose that a sustainable building can be designed through an integrative design process (IDP) which is best supported by BIM. However, our ongoing research program and consultations with advanced practitioners underscore a number of limitations. For example, a large portion of the interviewed professionals and construction stakeholders do not necessarily see a link between sustainable building, integrative design process and BIM, while in our opinion, their joint use augments the power of each of these approaches taken separately. Thus, there is an urgent necessity for the definition of an IDP-BIM framework, which could guide the building industry to sustainable results and better productivity. This paper defines such a framework, whose theoretical background lays on studies in social learning (activity theory and situated action theories). These theories suggest that learning and knowledge generation occurs mainly within a social process defined as an activity. This corresponds to the context in which the IDP-BIM framework will be used, its final objective being the transformation of building design practices. The proposed IDP-BIM framework is based on previous research and developments. Thus, firstly, IDP process was well formalized in the Roadmap for the Integrated Design Process‚ (Reed et al.) which is widely used as a guideline for collaborative integrative design by innovating practices in USA and Canada. Secondly, the National Building Information Modeling Standard (NBIMS) of the USA is putting an enormous effort in creating a BIM standard, Succar (2008) recently proposed a conceptual framework for BIM, but BIM ontology is still under development (Gursel et al 2009). Thirdly, an iterative design process bound to gating reviews (inspired from software development processes) was found to be successful in the context of multidisciplinary design studios (reported in our previous papers). The feedback from this study allowed for modifications and adjustments included in the present proposal. The gating process assures the good quality of the project and its compliance to the client's requirements. The challenge of this research is to map the above mentioned approaches, processes and technologies into the design process, thus creating an integrated framework supporting and nurturing sustainable design. The IDP-BIM framework can be represented by a multidimensional matrix linked to a semantic network knowledge database: - the axes of the matrix being the project timeline, the design process actors and building stakeholders (architect, engineers, client, contractor, environmental biologist, etc.), or different aspects of building performance (environmental, functional, social, interior environment quality, cost, etc.); and - the knowledge database providing multiple layers of semantic support in terms of process, domain knowledge, technology and workflow at a given moment of the project and for a given actor or building aspect. The IDP-BIM framework is created as an evolutive digital environment for know-how and will have an established protocol for regular updates. The paper will firstly present the state of the art in IDP and BIM. Secondly, it will expose the methodology used for the definition of the Framework, followed by a description of its structure, contents and digital implementation. Then, some scenarios for the use of the Framework will be shown as validation.
keywords integrated design process, BIM, multidisciplinary design, conceptual framework
series CAAD Futures
email
last changed 2012/02/11 19:21
_id ecaade2008_204
id ecaade2008_204
authors Kieferle, Joachim; Katz, Neil; Thaleck, Kruno
year 2008
title From Shape to Fabrication
source Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 537-544
doi https://doi.org/10.52842/conf.ecaade.2008.537
summary There is a close relation between building design and fabrication. However still it is mostly a sequential process where the fabrication with its geometric chances and limitations is only to a small extend taken into account in early design phases. In this paper we describe a protoype form work project, realized out of styrofoam cut out with a CNC hot wire-cutting system and coated with the Claraporon coating system. Due to the linear nature of hot wire cutting the surfaces that can be created are ruled surfaces. They are discussed in a more general way as well as first exercises with ruled surfaces in teaching.
keywords Digital fabrication, Form work, Ruled surface
series eCAADe
email
last changed 2022/06/07 07:52
_id acadia08_192
id acadia08_192
authors Lee, Charles
year 2008
title The Thermal Organism And Architecture
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 192-199
doi https://doi.org/10.52842/conf.acadia.2008.192
summary Throughout the history of architectural discourse the concept of metabolic function in a building and a buildings relationship to its creators is expressed by keen designers who understand the subtle linkage. Organistic homeostasis is a biological function found in all mammals including humans. The interior generation of heat classifies man as endothermic. Endothermic heat generation allows for a very controlled equilibrium and is a characteristic of more complex organisms. The body has produced highly evolved surface systems to help efficiently manage the flow of heat energy in and out of the body. I suggest building envelopes represent the human being projecting itself outwards in a prosthetic extension of the skin. Inherent in this projection are the same demands of envelope put forth in the body. In my research of anatomy I have found one system that has evolved to help facilitate endothermic heat regulation in mammals at the skin level, which is hair. How does hair transcribe into architecture? An analysis into the function of hair and its adaptable morphologies is studied. Hair is a thermal regulating system, its building equivalent are forms of thermal insulation and radiant barriers. Hairs goal is homeostatic equilibrium which has its architectural counterpoint known as the balance point. Hair is an adjustable system that mitigates between internal and external heat loading which is the goal of a building envelope. In conclusion the paper explores these issues and more in new building systems and design tactics that originate from the function of hair.
keywords Biology; Biomimetics; Design; Environment; Responsive
series ACADIA
last changed 2022/06/07 07:51
_id cdc2008_243
id cdc2008_243
authors Loukissas, Yanni
year 2008
title Keepers of the Geometry: Architects in a Culture of Simulation
source First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 243-244
summary “Why do we have to change? We’ve been building buildings for years without CATIA?” Roger Norfleet, a practicing architect in his thirties poses this question to Tim Quix, a generation older and an expert in CATIA, a computer-aided design tool developed by Dassault Systemes in the early 1980’s for use by aerospace engineers. It is 2005 and CATIA has just come into use at Paul Morris Associates, the thirty-person architecture firm where Norfleet works; he is struggling with what it will mean for him, for his firm, for his profession. Computer-aided design is about creativity, but also about jurisdiction, about who controls the design process. In Architecture: The Story of Practice, Architectural theorist Dana Cuff writes that each generation of architects is educated to understand what constitutes a creative act and who in the system of their profession is empowered to use it and at what time. Creativity is socially constructed and Norfleet is coming of age as an architect in a time of technological but also social transition. He must come to terms with the increasingly complex computeraided design tools that have changed both creativity and the rules by which it can operate. In today’s practices, architects use computer-aided design software to produce threedimensional geometric models. Sometimes they use off-the-shelf commercial software like CATIA, sometimes they customize this software through plug-ins and macros, sometimes they work with software that they have themselves programmed. And yet, conforming to Larson’s ideas that they claim the higher ground by identifying with art and not with science, contemporary architects do not often use the term “simulation.” Rather, they have held onto traditional terms such as “modeling” to describe the buzz of new activity with digital technology. But whether or not they use the term, simulation is creating new architectural identities and transforming relationships among a range of design collaborators: masters and apprentices, students and teachers, technical experts and virtuoso programmers. These days, constructing an identity as an architect requires that one define oneself in relation to simulation. Case studies, primarily from two architectural firms, illustrate the transformation of traditional relationships, in particular that of master and apprentice, and the emergence of new roles, including a new professional identity, “keeper of the geometry,” defined by the fusion of person and machine. Like any profession, architecture may be seen as a system in flux. However, with their new roles and relationships, architects are learning that the fight for professional jurisdiction is increasingly for jurisdiction over simulation. Computer-aided design is changing professional patterns of production in architecture, the very way in which professionals compete with each other by making new claims to knowledge. Even today, employees at Paul Morris squabble about the role that simulation software should play in the office. Among other things, they fight about the role it should play in promotion and firm hierarchy. They bicker about the selection of new simulation software, knowing that choosing software implies greater power for those who are expert in it. Architects and their collaborators are in a continual struggle to define the creative roles that can bring them professional acceptance and greater control over design. New technologies for computer-aided design do not change this reality, they become players in it.
email
last changed 2009/01/07 08:05

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 22HOMELOGIN (you are user _anon_529605 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002