Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	cdc2008_137
id	cdc2008_137
authors	Cardoso, Daniel
year	2008
title	Certain assumptions in Digital Design Culture: Design and the Automated Utopia
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 137-148
summary	Much of the research efforts in computational design for Architecture today aim to automate or bypass the production of construction documents as a means of freeing designers from the sticky and inconvenient contingencies of physical matter. This approach has yielded promising questions and applications, but is based on two related assumptions that often go unnoticed and that I wish to confront: 1. Designers are more creative if the simulations they rely on engage only with the superficial aspects of the objects they design (rather than with their structural and material-specific behaviors) and 2. The symbolic 3-D environments available in current design software are the ideal media for design because of their free nature as modeling spaces. These two assumptions are discussed both as cultural traits and in their relation to digital design technologies. The work presented is a step towards the far-sighted goal of answering the question: how can computation enable new kinds of dialogue between designer, design media and construction in a design process? In concrete, this paper proposes a critical framework for discussing contemporary digital design practices as a continuity –rather than as a rupture- of a long-standing tradition in architecture of separating design and construction.
email
last changed	2009/01/07 08:05

_id	ecaade2008_184
id	ecaade2008_184
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Fritz, Oliver; Rüdenauer, Kai; Lemmerzahl, Steffen
year	2008
title	Form Follows Structure?
doi	https://doi.org/10.52842/conf.ecaade.2008.451
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 451-458
summary	This paper can be viewed as the continued development of a research project presented at last year’s eCAADe. The project focused on the potential and possibilities of cooperation among architects, investors with concrete building projects, and researchers at the university level working on generative design and parametric construction. After having spent several years of research on design techniques in a purely academic setting at the university we see, contrary to our fears, that reality and the integration of concrete factors such as budget, time management, etc. does not diminish but rather improves the quality of our work. This work is not primarily concerned with the development of a new architectural language but the intelligent use of modern computer technology based on digitized planning processes defined as ‘complex building design’. Designs developed in this manner can be distinguished by certain characteristics, the evaluation of which is a point critically discussed in the following paper.
keywords	Generative Design, Collaborative Design, Parametric Design, User Participation in Design, Case Study, Strategic Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia11_152
id	acadia11_152
authors	Rael, Ronald; San Fratello, Virginia
year	2011
title	Developing Concrete Polymer Building Components for 3D Printing
doi	https://doi.org/10.52842/conf.acadia.2011.152
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 152-157
summary	The creation of building components that can be seen as sustainable, inexpensive, stronger, recyclable, customizable and perhaps even reparable to the environment is an urgent, and critical focus of architectural research. In the U.S. alone, the construction industry produced 143.5 million tons of building-related construction and demolition debris in 2008, and buildings, in their consumption of energy produce more greenhouse gasses than automobiles or industry.Because the inherent nature of 3D printing opens new possibilities for shaping materials, the process will reshape the way we think about architectural building components. Digital materiality, a term coined by Italian and Swiss architects Fabio Gramazio and Matthias Kohler, describes materiality increasingly enriched with digital characteristics where data, material, programming and construction are interwoven (Gramazio and Kohler, 2008). The research aspires towards this classification through the use of parametric modeling tools, analytic software and quantitative and qualitative analysis. Rapid prototyping, which is the automatic construction of physical objects using additive manufacturing technology, typically employs materials intended for the immediate analysis of form, scale, and tactility. Rarely do the materials used in this process have any long-term value, nor does the process - except in rare cases with expensive metal prototyping - have the ability to create actual and sustainable working products. This research intends to alter this state of affairs by developing methods for 3D printing using concrete for the production of long-lasting performance-based components.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 08:00

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2008_27_session3b_221
id	caadria2008_27_session3b_221
authors	Al-Haddad, Tristan
year	2008
title	Parametric modulations in Masonry
doi	https://doi.org/10.52842/conf.caadria.2008.221
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 221-228
summary	The focus of the research presented in this paper asks how a designer can create a flexible system of physical making which can accommodate multiple programmatic functions within a smooth whole, rather than creating an a priori singular formal object. This adaptable system of construction works through the development of an intelligent CAD model that can be mapped to a flexible manufacturing mechanism, i.e. a reconfigurable mold. This system of manufacturing can be used to cast totally unique solid modules without creating a unique mold for each part by manipulating the topological structure of the system. This approach takes the notion of mass-customization beyond the expensive and unsustainable one-offs that the design world has seen recently, and into a new paradigm of a sustainable, economically viable world of mass-customizable form and space.
keywords	Parametrics, Variability, Reconfigurability, UHPC, Topology, Molding, Casting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss2008-36
id	ddss2008-36
authors	Burger, J.; R.P. de Graaf, and G.J. Helmerhorst
year	2008
title	Dynamic Actor Network Steering And ControlManaging Actor Networks In The Construction Process
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
keywords	Multi-actor, network planning, critical path, linear programming
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_292
id	acadia08_292
authors	Celento, David; Del Harrow
year	2008
title	ceramiSKIN: Digital Possibilities for Ceramic Cladding Systems
doi	https://doi.org/10.52842/conf.acadia.2008.292
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 292-299
summary	CeramiSKIN is an inter-disciplinary investigation by an architect and a ceramics artist examining new possibilities for ceramic cladding using digital design and digital fabrication techniques. Research shown is part of an ongoing collaborative residency at The European Ceramics Work Centre. ¶ Ceramics are durable, sustainable, and capable of easily assuming detailed shapes with double curvature making ceramics seemingly ideal for digitally inspired “plastic” architecture. The primary reason for the decline in complex ceramic cladding is that manual mold-making is time-consuming—which is at odds with today’s high labor costs and compressed construction timeframes. We assert that digital advances in the area of mold-making will assist in removing some of the barriers for the use of complex ceramic cladding in architecture. ; The primary goals of ceramiSKIN as they relate to digitally assisted production are: greater variety and complexity, reduced cost and time, a higher degree of accuracy, and an attempt to facilitate a wider range of digital design possibilities through the use of a ceramics in architectural cladding systems. ¶ The following paper begins with an overview discussing double curvature and biophilia in architecture and their relationship to ceramics. This is followed by detailed commentary on three different experiments prior to a concluding summary.
keywords	Biomorphic; Collaboration; Complex Geometry; Digital Fabrication; Skin
series	ACADIA
last changed	2022/06/07 07:55

_id	ecaade2008_123
id	ecaade2008_123
authors	Cenani, Sehnaz; Ça_da_, Gülen
year	2008
title	Agent-Based System for Modeling User Behavior in Shopping Malls
doi	https://doi.org/10.52842/conf.ecaade.2008.635
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 635-642
summary	Agent-based systems are being used as decision support systems for solving architectural design problems. Usually in design phase, user behavior is ignored by the designers. Therefore, after the construction, the users face difficulties in emergency situations and in daily usage. As a result, buildings become insufficient to respond to users’ needs and design goals of the building itself. Before construction, ability of testing the interactions between the building and its users is particularly important to solve the problems in early phases of the design. Hence, to design a building that functions better in certain situations and time loss decreases in the design process. For these reasons, the aim of this study is to develop a model to simulate users in shopping malls.
keywords	User behavior, decision support systems, agent-based systems, simulation, shopping malls
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2008_103
id	ecaade2008_103
authors	Chase, Scott; Schultz, Ryan; Brouchoud, Jon
year	2008
title	Gather ’round the Wiki-Tree
doi	https://doi.org/10.52842/conf.ecaade.2008.809
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 809-816
summary	The growth of internet based communication has facilitated the development of open source, collaborative projects. Here we describe the results of three ‘Wikitecture’ experiments in collaborative, open source architectural design within the virtual world Second Life. We describe the in-world platform developed and its use for a design competition entry. Issues such as contribution assessment and the role of open source collaborative design in architecture and construction are discussed, concluding with a wish list for future enhancements.
keywords	Virtual worlds, wikis, open source architecture, collaborative design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2008_126
id	ecaade2008_126
authors	Chin, Chi-Ping
year	2008
title	Contextual Bricks
doi	https://doi.org/10.52842/conf.ecaade.2008.913
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 913-920
summary	Based on the importance of human behavior analysis in HCI research, this paper discusses the property of interaction in sending/receiving direction with diverse cases. A unit of contextual bricks was created as research model continuing to discover the possible solution on the problem that how to merge the novel media and technology into our living space invisibly with the exhibition of appropriate information. The prototype of contextual bricks preserved the characteristic of stability with cellular hexagonal structure, and each unit was designed with communicable construction. The people could get the contextual information from other spaces as seeing through the walls. In the future study, the contextual bricks have good applied possibility and developments in each kind of areas.
keywords	Context-aware, Ambient Intelligence, Context information interface, Interaction design, Communication design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia08_082
id	acadia08_082
authors	Del Campo, Matias; Sandra Manninger
year	2008
title	Speculations on Tissue Engineering and Architecture
doi	https://doi.org/10.52842/conf.acadia.2008.082
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 82-87
summary	The main aim of this paper is to speculate on opportunities inherent in the field of tissue engineering, for possible applications in the discipline of architecture. Engineered solutions based on the discoveries within the discipline of Tissue engineering can yield novel building materials and construction methods. These entire conjectures mean a different approach to the trajectories of architectural production, abandoning mechanical solutions for architecture problems in favor of biological, organ driven architectonic conditions.
keywords	Algorithm; Construction; Digital Fabrication; Material; Topology
series	ACADIA
last changed	2022/06/07 07:55

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

_id	ijac20076306
id	ijac20076306
authors	Dujovne, David Butelmann; Montoya, Claudio Labarca
year	2008
title	Digital design and manufacture based on Chiloean boats
source	International Journal of Architectural Computing vol. 6 - no. 3, pp. 317-333
summary	This paper proposes a design methodology for the manufacture of complex, double-curved surfaces based on the digital reconstruction of traditional structural and constructive elements of Chiloean boats. It also suggests a beneficial association between digital design and CAD CAM for manufacture using locally crafted construction techniques. The incorporation of innovated contemporary digital design and fabrication tools into traditional construction systems, aims to optimize and perpetuate traditional artisanal craft construction of complex shapes developed in the south of Chile. The importance of this research in budget-restricted economies, lies in the possibility of applying local construction and assembly techniques to new sophisticated designs that may satisfy the country's architectural needs. Scale models are used to record the design process and constructive development while information flow charts document the design methodology for the construction of complex geometries.
series	journal
last changed	2008/10/14 14:00

_id	ecaade2008_192
id	ecaade2008_192
authors	Fioravanti, Antonio
year	2008
title	An e-Learning Environment to Enhance Quality in Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2008.829
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 829-836
summary	The research project is aimed at enhancing the overall quality of buildings through a suitable exercise of design collaboration, and a delocalized cross-disciplinary learning for university students in the faculties of Architecture and Engineering. The research defines methods, techniques and ICT programs to provide education in the culture and exercise of collaboration for future professionals and technicians who operate in the field of the design and construction of complex building systems.
keywords	Collaborative Design, e-learning, knowledge bases, ontologies, multi-agent system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	82b1
id	82b1
authors	Greenwood D, Horne M, Thompson E M, Allwood C M, Wernemyr C, Westerdahl B.
year	2008
title	Strategic Perspectives of the Use of Virtual Reality within the Building Industries of Four Countries.
source	International Journal of Architectural Engineering and Design Management
summary	This paper presents results from the first stage of an analysis of the use of virtual reality (VR) within the building industries of strategically selected countries, namely, China, Sweden, the UK and the US. The aims of the research are to assess VR usage and its benefits within the building industries of these countries and to identify perceived barriers to VR usage and ways of overcoming them. The countries selected offer a range of experience in the adoption of VR technologies and the paper provides an initial analysis of developments at an international level. Semi-structured interviews were conducted with senior professionals from each of six leading construction companies within each country. The findings included the rationale for the adoption of VR and the barriers to doing so, as well as some divergence between the respondents in their working definition of what visualization and, specifically, VR actually represents.
keywords	Building industry; implementation strategy;international perspectives; interview survey; virtual reality
series	other
type	normal paper
email
last changed	2008/11/26 16:54

_id	acadia08_208
id	acadia08_208
authors	Griffiths, Jason
year	2008
title	Man + Water + Fan = Freshman: Natural Process of Evaporative Cooling and the Digital Fabrication of the ASU Outdoor Dining Pavilion
doi	https://doi.org/10.52842/conf.acadia.2008.208
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 208-213
summary	To the east of Johnson City TX is the Lyndon B. Johnson’s family home. Part of the Johnson Estate2 is given over to a working farm circa 1870 that presents various aspects of domestic practice from the era. This includes a desert fridge which is a simple four-legged structure with a slightly battered profile that’s draped in calico. Its principle is simple; water from an upturned jar is drawn by osmosis down the sides of the calico where it evaporates in wind currents drawn though a “dog run” between two log cabins. Cooled air circulates within the structure and where cheese and milk are kept fresh during the summer. The desert fridge is a simple system that reaches a state of equilibrium through the natural process of evaporation. ¶ This system provides a working model for a prototype structure for an outdoor dining pavilion that was designed and constructed on the campus of Arizona State University. The desert fridge is the basis for a “biological process”3 of evaporative cooling that has been interpreted in terms a ritual of outdoor dining in arid climates. The pavilion is intended as a gathering point and a place of interaction for ASU freshmen. The long-term aim of this project is to provide a multiple of these pavilions across the campus that will be the locus of a sequence of dining events over a “dining season”4 during the fall and spring semester. ; This paper describes how the desert fridge principle has been interpreted in the program and construction of the dining pavilion. It explores a sequence of levels by which the structure, via digital production process, provides an educational narrative on sustainability. This communicative quality is portrayed by the building in direct biological terms, through tacit knowledge, perceived phenomena, lexical and mechanical systems. The paper also describes how these digital production process were used in the building’s design and fabrication. These range from an empirical prognosis of evaporative cooling effects, fluid dynamics, heat mapping and solar radiation analysis through to sheet steel laser cutting, folded plate construction and fully associative variable models of standard steel construction. The aim of the pavilion is to create an environment that presents the evaporative cooling message at a multiple of levels that will concentrate the visitor in holistic understanding of the processes imbued within the building.5
keywords	Communication; Digital Fabrication; Environment; System
series	ACADIA
last changed	2022/06/07 07:51

_id	caadria2008_6_session1b_053
id	caadria2008_6_session1b_053
authors	Gu, Ning;Singh Vishal, London Kerry, Ljiljana Brankovic, Taylor Claudelle
year	2008
title	Adopting Building Information Modeling (BIM) as Collaboration Platform in the Design Industry
doi	https://doi.org/10.52842/conf.caadria.2008.053
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 53-60
summary	This paper discusses the preliminary findings of an ongoing research project aimed at developing a technological, operational and strategic analysis of adopting BIM in AEC/FM (Architecture-Engineering-Construction/Facility Management) industry as a collaboration tool. Outcomes of the project will provide specifications and guidelines as well as establish industry standards for implementing BIM in practice. This research primarily focuses on BIM model servers as a collaboration platform, and hence the guidelines are aimed at enhancing collaboration capabilities. This paper reports on the findings from: (1) a critical review of latest BIM literature and commercial applications, and (2) workshops with focus groups on changing work-practice, role of technology, current perception and expectations of BIM. Layout for case studies being undertaken is presented. These findings provide a base to develop comprehensive software specifications and national guidelines for BIM with particular emphasis on BIM model servers as collaboration platforms.
keywords	Building Information Modelling, Collaboration Platform
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2008_197
id	ecaade2008_197
authors	Hamid, Bauni
year	2008
title	Collaborative Design and Complex Organization
doi	https://doi.org/10.52842/conf.ecaade.2008.667
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 667-674
summary	This paper discusses our investigation on the potentials of CAAD system implementation to generate collaborative process in a complex organization of construction project. Housing reconstruction projects in disaster-recovery context has been taken as case study to examine some CAAD system that has been claimed as collaborative. Based on social organizational theory and complex adaptive system theory we attempt too test the claim by analyzing the flexibility of these CAD system on the real complex organizational project. We stratify the result based on the level of adaptability of each CAAD system to indicate the level of collaboration.
keywords	Collaborative design: complex organization, disaster recovery, CAAD, reconstruction
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: