Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2008_44_session4b_357
id	caadria2008_44_session4b_357
authors	Ham, Jeremy
year	2008
title	Developing The a+b/online Virtual Gallery
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 357-363
doi	https://doi.org/10.52842/conf.caadria.2008.357
summary	The a+b/online project is an exemplar of a comprehensive online resource that includes Virtual Galleries, resources, digital case studies and an image repository (http://www.ab.deakin.edu.au/online). Throughout its development since 2001, the project has expanded to include several thousand digital objects. This paper discusses the development of the a+b/online site and outlines some of the issues associated with its development. The current state of the project is discussed in relation to the current paradigm of citizen media including blogs.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2008_71_session7a_587
id	caadria2008_71_session7a_587
authors	Reffat, Rabee M.; Yaman Khaeruzzaman, Emad El-Sebakhy, I Putu Raharja
year	2008
title	Interactive Architectural Compositions in 3D Real-Time Virtual Environments
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 587-593
doi	https://doi.org/10.52842/conf.caadria.2008.587
summary	This paper presents an interactive computational system for developing architectural compositions within a 3D real-time virtual environment. The features of implemented system within the interface of Activeworlds platform includes (a) providing a set of 3D building objects that are made available within the virtual environment and can be utilized by the user to construct architectural compositions; (b) allowing users to modify both geometrical and non-geometrical properties of these objects; and (c) maintaining interrelationships between these objects using constrain-based rules automated by the developed system in real-time. The developed IAMVE (Interactive Architectural Modeling in Virtual Environments) system provides more flexibility to architectural designers and develops an edge to multi-user real time 3D virtual environments to be better utilized in the context of architectural design
keywords	3D Virtual Environments, 3D Modeling; Architectural Compositions, User Interactivity
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	caadria2008_72_session7a_594
id	caadria2008_72_session7a_594
authors	Kosavinta, Satakhun
year	2008
title	Collaborative Financial Feasibility With CAAD For Residential Development
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 594-600
doi	https://doi.org/10.52842/conf.caadria.2008.594
summary	Computer Aided Architectural Design software is a necessary tool for the architectural design of a visible object or model. In residential development, an estimation of time/cost corresponding to the design is needed in order to complete its successful project. But available feasibility supporting tools usually lacks ability to share their information. To solve this limitation, this research proposes a design of Graphic User Interface (GUI) for collaborative financial feasibility through an architectural design process in housing project. The development of the GUI starts from collecting some information and requirement from National Housing Authority of Thailand. A heuristic decision making approach based on financial analysis are then designed for both design processes and feasibility processes of the project. Finally, design of the GUI is an integration of CAAD engines, design standards and financial feasibility analysis. Proposed GUI for collaborative financial feasibility is also tested and verified with some information from sample past projects of the National Housing Authority. From the experimental results, This GUI allows designers to improve the design of the project in real-time by inspecting the result of their design via the part of the architectural design-oriented GUI called myMonitoring and Scratch Pad. Together with planning, collaborative financial feasibility is focusing on the four main financial parameters which illustrated the possible chance of the project: Net Present Value (NPV), Benefit-Cost Ratio (B/C), Internal Rate of Return (IRR), and Payback Period. The core system was developed on Java Technology such as JSP and Swing empowered by 3D game engine. In addition, “Virtools” as an authoring tool was applied to improve interactive 3D virtual environment and explore rapid online system prototyping.
keywords	Collaborative: Financial Feasibility; CAAD; Residential Development; Virtual Reality (VR)
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2008_199
id	sigradi2008_199
authors	Castañe, Dora
year	2008
title	Rosario, views on the integral revitalization of a cultural heritage [Rosario, Miradas sobre la Revitalización Integral de un Patrimonio Cultural]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This work shows the study of the methods and techniques for the development of a virtual vision VRML 3D included in an "Digitally-integrated knowledge base" with interactive interphases of a significantly revitalized fragment of a central area of the city of Rosario, Province of Santa Fé, Argentina, that includes an emblematic heritage for the Argentineans: the National Monument to the Flag. Digital models that partly allow the development of a hypothesis of integration between the digitized information and information technology—new digital proximity— to the effects of being able to investigate the generation of multimedia database that includes three-dimensional and dynamic models of the mentioned type, in this case, urban, architectonic, and cultural heritage. Different views and research on heritage have been developing. Nevertheless, the use of these new 3D non-immersive technologies and inter-phases are opening a new field of vision and understanding of the subject.
keywords	Heritage, Urban-architectural planning, virtual reality
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ddss2008-32
id	ddss2008-32
authors	Chiaradia, Alain; Christian Schwander, Jorge Gil, Eva Friedrich
year	2008
title	Mapping the intangible value of urban layout (i-VALUL): Developing a tool kit for the socio-economic valuation of urbanarea, for designers and decision makers
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper we present the development of a GIS tool kit for the socioeconomic valuation of urban areas towards the creation of sustainable communities, describing the project context, development process, the tool kit’s structure, its main tools and initial feedback from its use. We then present the plan for training sessions and pilot projects where the tool kit is going to be used, and conclude with the discussion of the development of a single integrated tool to be used beyond the life of the ‘i-VALUL’ project. This project was supported by the UCL led UrbanBuzz programme within which UEL is a prime partner.
keywords	Urban planning, spatial analysis, design support tools, evaluation system, GIS
series	DDSS
last changed	2008/09/01 17:06

_id	ac21
id	ac21
authors	Giddings B, Horne M
year	2008
title	The Changing Patterns of Architectural Design Education
source	Architecture and Modern Information Technologies, Vol. 3, No. 4. ISSN-1998-4839
summary	Digital technologies have been introduced to students of architecture for over two decades and at present it could be argued that students are producing some of the highest quality designs, and some of the most interesting forms ever to come from University Schools. The value of computer aided design (CAD) is also being demonstrated in architectural practice, with high profile, large budget, bespoke and iconic buildings designed by internationally renowned architects. This paper reviews the changing patterns of architectural design education and considers the contribution digital technologies could make to buildings with more commonplace uses. The study offers a perspective on different kinds of buildings and considers the influence that emerging technologies are having on building form. It outlines digital technologies, alongside students’ application for architectural design and considers the role they could play in the future, in developing a shared architectural language. It is suggested that some of the biggest opportunities for future research will be in the design of external spaces, often a neglected part of architectural design education.
keywords	architectural design education, digital technologies
series	other
type	normal paper
email
more	http://www.marhi.ru/AMIT
last changed	2008/11/02 20:38

_id	ddss2008-43
id	ddss2008-43
authors	Katoshevski, Rachel; Theo Arentze and Harry Timmermans
year	2008
title	Simulating Urban Dynamics Using a Combination of CellularAutomata and Activity-Based Models
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Cellular automata models of urban change have been criticised for their lack of behavioural theory and representation in simulating urban change. It has led to a plea for developing multi-agent models. As a first step into this direction, this paper discusses the formulation of a combination of a cellular automata representation for an initial configuration of land use. This is linked to an activity-based model of travel demand, which generates varying demand for facilities across space. Agents, representing facility providers respond to this demand in locating and resizing their facilities. The interplay between these components then results in urban dynamics. The model is illustrated using a hypothetical example of urban forms.
keywords	Cellular automata, Activity-Based Modelling, Urban dynamics
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_55_session5b_452
id	caadria2008_55_session5b_452
authors	Park, Jae Wan; Yunseok Oscar Kang, Kostas Terzidis
year	2008
title	[SIN]uous: Developing a Pattern Fabricator Bridging between Visualization in the Digital and Fabrication in the Physical
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 452-458
doi	https://doi.org/10.52842/conf.caadria.2008.452
summary	We describe a domain-specific design tool capable of creating and fabricating complicated curvilinear patterns within the early stages of the design. This tool entitled “[SIN]uous” is a parametric design application that allows both the customization and fabrication of dynamic patterns created by the combination of SINE and COSINE functions. This tool allows designers and architects to design curvilinear patterns and manufacture schematic physical models of them in a short period of time, using rapid prototyping equipment such as a laser cutter. This tool consists of several modules, including a pattern maker, a fabricator, and a 3-D simulator. Using this tool, patterns are generated by manipulating variable parameters and fabricated according to the assembly sequence easily and quickly through algorithms by locating nodes of intersections. The end result is an exported computer file compatible with laser cutting technology. We expect that this design tool will facilitate the transition between the virtual and the physical, thus resulting in a better design product.
keywords	Pattern; Fabrication; Fabricator; Rapid Prototyping
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2008_188
id	ecaade2008_188
authors	Tunçer, Bige; de Ruiter, Paul; Mulders, Sander
year	2008
title	An Experiment in Multidisciplinary Digital Design
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 659-666
doi	https://doi.org/10.52842/conf.ecaade.2008.659
summary	The design and realization of complex buildings requires multidisciplinary design collaboration from early on in the design process. The intensive use of digital design environments in this process demands new knowledge and skills from the involved players including integrating and managing digital design data, developing custom design tools, and utilizing visualization and rapid prototyping techniques. In order to prepare our students for these evolving practices we have developed a multidisciplinary collaborative design studio, named XXL, where student teams work in groups and each students claims a role: architectural design, structural design, digital design, construction and cladding design, and process management. In this paper, we describe the studio, discuss the contributions of the Digital Design Manager, and relate these contributions to design education and practice.
keywords	Multidisciplinary design, design collaboration, digital design, architectural education
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-11
id	ddss2008-11
authors	Gohnai, Y.; A. Ohgai and K. Watanabe
year	2008
title	A simulation model development of firefightingactivity by community residents against coseismic firespread using multi-agent systemAs a support tool for community-based disaster preventionplanning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper attempted to develop a simulation model of residents’ firefighting activity against coseismic fire spread using multi-agent system. The developed model was applied to a case study area. In the application, the simulations were carried out to the existing area and eleven cases of the assumption (virtual conditions) of the area where are implemented various non-physical and physical measures. As a result, the measures with only physical and haphazard multitude of measures did not show a remarked effect of disaster prevention performance. And, it is confirmed that the model can visually, dynamically and quantitatively output results. From these outputs, the possibility of contribution for enhancing residents’ awareness and drafting a plan of disaster prevention was confirmed. However, there are still some problems to be solved for the practical use of the model.
keywords	Community-based Planning for Disaster Prevention, Planning Support System, Fire Spread Simulation, Firefighting simulation, Multi-agent system, Cellular Automata
series	DDSS
last changed	2008/09/01 17:06

_id	82b1
id	82b1
authors	Greenwood D, Horne M, Thompson E M, Allwood C M, Wernemyr C, Westerdahl B.
year	2008
title	Strategic Perspectives of the Use of Virtual Reality within the Building Industries of Four Countries.
source	International Journal of Architectural Engineering and Design Management
summary	This paper presents results from the first stage of an analysis of the use of virtual reality (VR) within the building industries of strategically selected countries, namely, China, Sweden, the UK and the US. The aims of the research are to assess VR usage and its benefits within the building industries of these countries and to identify perceived barriers to VR usage and ways of overcoming them. The countries selected offer a range of experience in the adoption of VR technologies and the paper provides an initial analysis of developments at an international level. Semi-structured interviews were conducted with senior professionals from each of six leading construction companies within each country. The findings included the rationale for the adoption of VR and the barriers to doing so, as well as some divergence between the respondents in their working definition of what visualization and, specifically, VR actually represents.
keywords	Building industry; implementation strategy;international perspectives; interview survey; virtual reality
series	other
type	normal paper
email
last changed	2008/11/26 16:54

_id	ddss2008-30
id	ddss2008-30
authors	Hemmerling, Marco
year	2008
title	Digital MaterialPerception, Interaction and Immersion in Virtual Environments
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper outlines two major aspects of virtual environments for architectural design. On the one hand it focusses on how to use virtual reality as an extended tool to generate spatial design by building up and interacting with a three-dimensional digital model. On the other hand it describes - based on a case study - the relation between perception, interaction and immersion in virtual environments. Both approaches can be interconnected to a continues design process, that allows the designer to create, manipulate, visualize and decide on spatial concepts in a holistic three-dimensional simulation.
keywords	Virtual Environment, Digital Architecture, Immersion, Perception, Human-Computer Interaction
series	DDSS
last changed	2008/09/01 17:06

_id	cdc2008_295
id	cdc2008_295
authors	Juhász, Joseph B. and Robert H. Flanagan
year	2008
title	Do Narratives Matter? Are Narratives Matter?
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 295-300
summary	Narratives—public and private are the stuff of design. This commonplace truism is often forgotten in the buzz, boom and confusion surrounding the development of digital media; digital media seem to offer a “virtual” alternative to such stuff; as such, the current Romance with Digital Media is nothing but a weak revival of primitive mentalism.
email
last changed	2009/01/07 08:05

_id	kozlov02_paper_eaea2007
id	kozlov02_paper_eaea2007
authors	Kozlo, Dmitri
year	2008
title	Topological Method of Construction of Point Surfaces as Physical Models
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	The shape of architectural objects in general can be treated as an envelope – a two dimensional surface embedded into three dimensional space. We directly perceive only the surface as a synthesis of sequential “photo snaps” – the two dimensional imprints on a retina – a concave screen inside of our eyes. In 15th century Italian architect and theorist L. B. Alberti claimed that the architecture consists in the outlines and the structure (lineamenta et structura in the original Latin text). The visible shape (outlines) exists only because a directly not perceived structure determines it. Like Alberti, the modern mathematical theories of form distinguish the shape as an exterior surface and the form itself as an internal structure. This subtle difference becomes a very important subject in the relationship between a virtual and a physical model in the studies of architectural endoscopy.
keywords	topology, manifold, knots, point surface, physical model
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	sigradi2008_007
id	sigradi2008_007
authors	Martens, Bob
year	2008
title	An Update on the Virtual Reconstruction of Synagogues in the City of Vienna
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper describes the reconstruction work in progress on Viennese Synagogues. The related project activities started in 1998, and all major temples have been reconstructed since then. The paper outlines the utilization of this research work in the form of a city guide, thus potentially reaching a wider audience. Furthermore, the idea to present the information in such a context led to a specific processing and delivery format.
keywords	Virtual reconstruction; cultural heritage; synagogue; city guide; Jewish sacred building
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2008_016
id	ecaade2008_016
authors	Martens, Bob; Achten, Henri
year	2008
title	Do you Moodle?
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 153-160
doi	https://doi.org/10.52842/conf.ecaade.2008.153
summary	The authors follow up on their long-standing interest in Virtual Learning Environments (VLE’s). They sketch out connected terms and definitions, taking into account the framework conditions of a design studio context as well as regular teaching. Subsequently, they describe the MOODLE-platform and supply arguments for selection along with alternatives. They particularly focus on enriching interaction targeted towards learning effects and discuss the connected pedagogical models. The selective use of features is also taken into consideration. The contribution concludes with a discussion of the pros and cons of MOODLE.
keywords	VLE, Course Management System (CMS), e-learning platform, MOODLE
series	eCAADe
email
last changed	2022/06/07 07:59

_id	9d5f
id	9d5f
authors	Podevyn M, Horne M, Fisher P, Thompson, E
year	2008
title	Global Visualisation Engines – Issues for Urban Landscape Planning Participation Processes
source	Digital Design in Landscape Architecture 2008, Proceedings at Anhalt University of Applied Sciences, 29-31 May 2008
summary	Traditional planning processes use two-dimensional drawings, plans, sections, elevations and artists’ impressions to communicate design intent to interested parties. Three-dimensional computer visualisation technologies that support the planning process raise institutional and organisational challenges as their perceived benefits are considered. Virtual Reality (VR) models add interactivity and immersiveness to landscape visualisations but require appropriate technical input and management. This paper explores two main themes. Firstly, how interactive 3D computer simulations of planning proposals can be adopted to successfully improve the traditional process. It reports on a pilot study to examine how architects, clients, planning officers and university researchers have worked together to systematically examine and analyse this changing process. It reports on issues concerned with ownership of city models, the roles and the compatibility, accuracy and remote sharing of urban data. Secondly, we explore the emerging theme of web-based GIS applications and their impact on architectural visualisation. The process of placing urban data onto Google Earth was tested and the resulting issues emerging with this software, including IT and data management and accuracy issues for suitable architectural visualisation are discussed. The study also reports and offers an overview of placing accurate urban landscape data onto Google Earth and a discussion of using this method for online public participation and communicating technical building information.
keywords	3D modelling, planning process, VR city models, Google Earth
series	other
type	normal paper
email
last changed	2008/11/02 21:09

_id	ddss2008-17
id	ddss2008-17
authors	Sun, Chengyu; Bauke de Vries and Qi Zhao
year	2008
title	Measure the Evacuees’ Preference on ArchitecturalCues by CAVE
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	An evacuees’ preference prediction function on architectural cues are described here as a crucial part of the evacuation model to simulate how the evacuees search the route to exit according to the architectural information in the public underground space. The model is developed to evaluate the egress design in the initial space design stage and to provide the existing compositive evacuation models a support on the usage of architectural information. First the over simplification on the architectural information in the existing evacuation models is discussed. Then a list of so-called architectural cues and the related evacuation model are introduced, in which the evacuees always egress to the seen or remembered architectural cue with the highest preference in every step. The emphasis of the paper is put on the analysis of the preference function including the CAVE-based conjoint analysis research method, the experiment design and implementation of the virtual drill, and the estimation of the parameters from the collected choices. The preference function for five architectural cue pairs, Doorway-Doorway, Stair-Stair, Exit- Exit, Doorway-Stair, Exit-Stair is built from the choice data of nearly one hundred Chinese subjects.
keywords	CAVE, evacuation, conjoint analysis
series	DDSS
last changed	2008/09/01 17:06

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: