Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 490

Reformat results as: short short into frame detailed detailed into frame

_id	acadia11_152
id	acadia11_152
authors	Rael, Ronald; San Fratello, Virginia
year	2011
title	Developing Concrete Polymer Building Components for 3D Printing
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 152-157
doi	https://doi.org/10.52842/conf.acadia.2011.152
summary	The creation of building components that can be seen as sustainable, inexpensive, stronger, recyclable, customizable and perhaps even reparable to the environment is an urgent, and critical focus of architectural research. In the U.S. alone, the construction industry produced 143.5 million tons of building-related construction and demolition debris in 2008, and buildings, in their consumption of energy produce more greenhouse gasses than automobiles or industry.Because the inherent nature of 3D printing opens new possibilities for shaping materials, the process will reshape the way we think about architectural building components. Digital materiality, a term coined by Italian and Swiss architects Fabio Gramazio and Matthias Kohler, describes materiality increasingly enriched with digital characteristics where data, material, programming and construction are interwoven (Gramazio and Kohler, 2008). The research aspires towards this classification through the use of parametric modeling tools, analytic software and quantitative and qualitative analysis. Rapid prototyping, which is the automatic construction of physical objects using additive manufacturing technology, typically employs materials intended for the immediate analysis of form, scale, and tactility. Rarely do the materials used in this process have any long-term value, nor does the process - except in rare cases with expensive metal prototyping - have the ability to create actual and sustainable working products. This research intends to alter this state of affairs by developing methods for 3D printing using concrete for the production of long-lasting performance-based components.
series	ACADIA
type	work in progress
email
last changed	2022/06/07 08:00

_id	acadia11_242
id	acadia11_242
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2011
title	Parametric Robot Control: Integrated CAD/CAM for Architectural Design
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 242-251
doi	https://doi.org/10.52842/conf.acadia.2011.242
summary	Robots are gaining popularity in architecture. Snøhetta has recently purchased their own industrial robot, becoming one of the first architectural offices to adopt robot technology. As more and more architects are exposed to robotic fabrication, the need for easy interoperability, integration into architectural design tools and general accessibility will increase. Architects are discovering that industrial robots are much more than kinematic machines for stacking bricks, welding or milling - they are highly multifunctional and can be used for a huge variety of tasks. However, industry standard software does not provide easy solutions for allowing direct robot control right from CAAD (Computer Aided Architectural Design) systems. In this paper we will discuss existing methods of programming industrial robots, published architectural results (Gramazio and Kohler 2008) and the design of a new user interface that allows intuitive control of parametric designs and customized robotic mass production, by integrating CAM (Computer Aided Manufacturing) functions into CAAD.
keywords	robot programming; parametric design; mass customization; grasshopper component design; fabrication; robot milling; digital architecture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cdc2008_245
id	cdc2008_245
authors	Kim, Simon and Mariana Ibanez
year	2008
title	Tempus Fugit: Transitions and Performance in Activated Architecture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 245-251
summary	Meaning in architecture has isotropic instances of realization, one that can unfold during the design process and one that can be layered onto the artifact of the building; its components and forms constitute a communication flow that emerges from an abstract form of description to its physicality. The internal cognition of this condition situates the subject as the third element, one that identifies the meaning from the extant building to its proxy meaning. In this manner, narrative and aesthetics perform the actualizations (the spatial and physical sequences) so that the occupant may understand its implications.1 Architecture is thus a one-directional flow of information (the building is an inert object from which meaning is derived, its physicality is static). Even in process-driven design, the synthesis of the many and the ordered, is evident in the materiality of the architectural manifestation; the building, although presented as a result of process cannot be separated from the reading of the generative operations. 2 Rather than continue in this manner of constructing meaning from an extensive coding (joining a concept to an object) or the instantiation (producing one from a larger field of possibilities) from a version, we suggest a dialectic that is bi-directional, or even multinodal, that is, continually self-renewing in meaning and material configuration with the active participation of the occupant. This representation is one that is time-based.
email
last changed	2009/01/07 08:05

_id	cdc2008_367
id	cdc2008_367
authors	Senagala, Mahesh
year	2008
title	Deconstructing Materiality: Harderials, Softerials, Minderials, and the Transformation of Architecture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 367-376
summary	This paper presents a deconstructionist close reading of the conventional discourses about materiality by forwarding a triadic framework of harderials, softerials and minderials. The discourse draws from the Derridan notion of différance in articulating the fundamental difficulty in understanding materiality. Taking the discourse about materiality into the digital realm, a critical discussion of softerials (BREP Solids, Polynomial Surfaces and Isomorphic Polysurfaces) and their implication to architecture are presented. Questions about a possible material-envy and materiality-complex in architectural profession are also raised. Different binary strategies by which softerials are relegated by architects to a secondary status of “media” are exposed.
last changed	2009/01/07 08:05

_id	cdc2008_403
id	cdc2008_403
authors	Wie, Shaxin
year	2008
title	Poetics of performative space
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 403-417
summary	My project concerns subjectivation, performativity and embodiment, as inflected by notions of process and field. These questions were inspired by recent work in the margins of experimental performance, sound arts, computational media, and philosophy of process. They are informed by, and critically respond to Leibniz’s continuous substance, Whitehead’s “unbifurcated” process ontology, and Petitot’s approach to morphogenesis. Beginning with a concern with the materiality of writing, the project explores the ethico-aesthetics of touch and movement, and poetic architecture or installation events as sites for speculative action. The kind of events I describe, are collective, co-present, embodied, and a-linguistic. The potential for physical contact is a condition for the collective embodied experiences needed to conduct experimental phenomenology. Our events are designed for four or more participants, three to destabilize dyadic pairing, and lower the threshold to improvising being in that space, and a fourth for potential sociality. Having dissolved line between actor and spectator, we may adopt the disposition of an agent of change, or equally a witness of the event. Relinquishing also a categoreal fixation on objects in favor of continua, we inhabit ambient environments thick with media and matter that evolve in concert with movement or gesture.
email
last changed	2009/01/07 08:05

_id	9609
id	9609
authors	Abdelmohsen, Sherif; Do, Ellen Yi-Luen
year	2008
title	Energy Puppet: An Ambient Awareness Interface for Home Energy Consumption
source	Digital proceedings of the 7th International Workshop on Social Intelligence Design (SID 2008), School of Architecture, Universidad de Puerto Rico, San Juan, Puerto Rico.
summary	The Energy Puppet is an ambient display device that provides peripheral awareness of energy consumption for individual home appliances. The display produces different “pet-like” behavioral reactions according to energy use patterns of the appliances to give homeowners an indication of their energy consumption status. The puppet would raise its “arms” in victory to display normal consumption rate, or its “eyes” would change color to red and “roar” to warn the homeowners when the specific appliance reaches dangerously high consumption rates. The assumption is that the awareness of energy consumption could affect how people consume and control energy use in their households. This paper describes the usage scenarios and the design and implementation of Energy Puppet and discusses future research directions.
keywords	Ambient Intelligence, Peripheral Awareness, Energy Consumption
series	other
type	normal paper
email
last changed	2010/01/30 07:22

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_153
id	ecaade2008_153
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 267-274
doi	https://doi.org/10.52842/conf.ecaade.2008.267
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. It observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. It discusses then, the confluence of architecture, information and communication technologies. The architecture has historically mediated the way people interact, but this interaction now has been greatly changed by new technologies. Then, it analyses the hypothesis that the experiments with new media art can bring the field of architecture closer to information and communication technologies. An educational experience is presented, aiming to verify some points discussed on the text. Concluding with an exposition of the potentialities of some hybrid art modalities in qualifying architectural practices.
keywords	Architecture, Information and Communication Technologies, Digital Art, Site Specific Art, Architectural Learning
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2008_025
id	ecaade2008_025
authors	Asanowicz, Aleksander
year	2008
title	How to Find an Idea? - Computer Aided Creativity
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 735-742
doi	https://doi.org/10.52842/conf.ecaade.2008.735
summary	In this paper the possibilities of using computer software in creative searching of design ideas is analysed. At the basis of such psychological theories as Incubation, Synectics, Geneplore, Bisociation, Conceptual Blending, Visual Synectics the implementation of digital technologies in the idea searching – the main stage of design process – is presented. In all computer ‘metaphorisation’ methods presented in this paper pictures are treated as idea triggers. Designer generate the ideas of the form by use the pictures as triggers for free association or for metaphorisation. The two cases of implementation of these methods, which based on graphic transformations, will be presented.
keywords	Creativity, design methods, form searching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdc2008_229
id	cdc2008_229
authors	Asut, Serdar
year	2008
title	Rethinking the Creative Architectural Design in the Digital Culture
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 229-234
summary	This paper tries to examine the effects of emerging digital tools in architectural design. Digital tools are not only practical instruments used for drawing, but they also affect design thinking. As the ones that are used in architectural design are mostly commercial, one can say that design thinking, the identity of the design and the creativity of the designer are defined by the companies which develop these tools. Therefore architects have to be able to manipulate these tools and personalize them in order to free their design thinking and creativity. This paper addresses the open source development in order to redefine creativity in architecture of digital culture.
keywords	Design Tools, Digital Culture, CAD Software, Open Source
email
last changed	2009/01/07 08:05

_id	ijac20076304
id	ijac20076304
authors	Baltazar, Ana Paula; Kapp, Silke; Nascimento, Denise Morado; Goncalves, Rodrigo Marcandier; Lino, Sulamita Fonseca; Coelho, Mara Lidia Rodrigues; Olalquiaga, Amanda Alves; Gontijo, Felipe Jose; Silva, Joana Vieira Da; Magalhaes, Pedro Arthur Novaes
year	2008
title	Noncopyright And The Digital Interface To Support The Autonomous Production Of Dwellings
source	International Journal of Architectural Computing vol. 6 - no. 3, pp. 279-297
summary	This paper presents the discussions on intellectual property crucial for the research group MOM to develop the system IDA (digital interface for supporting autonomous production of dwellings). It first introduces IDA, its conceptual framework, its database and its interactive interface. Then, it examines the arguments for copyright, identifying them as myths or disguises of other intentions, usually based on perpetuating privileges. From that it discusses the way IDA approaches interaction as a means to break the usual logic of perpetuating privileges in digital systems. This leads to examining some anti-copyright movements concluding that they follow the same logic of register of the copyright. Thus, noncopyright seems to be the best means to protest against the current logic and for conveying information towards autonomy of users in their processes of production of space. It also points to an alternative use of computers in architecture as proposed in IDA, which is not based on representation but on interaction.
series	journal
last changed	2008/10/14 14:00

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_115
id	ecaade2008_115
authors	Bernal, Marcelo; Yi-Luen Do, Ellen
year	2008
title	Variation from Repetition
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 791-798
doi	https://doi.org/10.52842/conf.ecaade.2008.791
summary	Making double curvature surfaces in architectural design is nontrivial and presents many challenges. Design and fabrication of these complex shapes requires systematic approaches. Most current design and fabrication processes distribute adaptable patterns over modulated variable surfaces. But to produce variation with this method means many machining hours and a budget that a conventional architectural project cannot afford. An alternative method to achieve such complex shapes would be to overlap identical elements on a grid. This paper presents an approach to fabricate such complex surfaces from the repetition of a series of identical elements.
keywords	Double curvature, adaptability: automation, digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2018_1359
id	sigradi2018_1359
authors	Bertola Duarte, Rovenir; Ziger Dalgallo, Ayla; Consalter Diniz, Maria Luisa; Romão Magoga, Thais
year	2018
title	A window to the autism: the political role of the difference of an objectile in the homogeneous school
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 848-853
summary	This paper approaches the insertion of an objectile in the homogeneous space of a school, looking to bring flexibility and responsiveness to assist a user with Autism Spectrum Disorder (ASD). The research concerns with photosensitivity, a problem faced by almost 25% of the children with autism (Miller-Horn; Spence; Takeoka, 2011). The study is based on the theories for ASD environments that speak of ‘sensorial perception’ and ‘thinking with imagery’ (Mostafa, 2008), and the coexistence of Sensory Design Theory and Neuro-Typical Method (Pomana, 2015). The result consists of a gadget developed in MIT App Inventor tool and a curtain that interact responsively through an Arduino code, for a new connection between the user and his surroundings.
keywords	Objectile; Responsive Architecture; Architecture and autism; ASD; Inclusive school
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2008_024
id	ecaade2008_024
authors	Boeykens, Stefan; Neuckermans, Herman
year	2008
title	Representational Limitations and Improvements in Building Information Modeling
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 35-42
doi	https://doi.org/10.52842/conf.ecaade.2008.035
summary	This paper discusses advantages and limitations of different representation types, illustrated with examples from current commercial Building Information Modeling applications. There is still a potential benefit in more thoroughly adapting additional representations to access and manage project data.The paper presents arguments to adapt a hybrid approach, where multiple representations should form a series of interfaces to interact with a building model. Inspiration is derived from software applications not associated with Building Information Modeling.
keywords	BIM, Representation, Design Software, Digital Building Model
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia08_364
id	acadia08_364
authors	Bonwetsch, Tobias; Ralph Baertschi ;Silvan Oesterle
year	2008
title	Adding Performance Criteria to Digital Fabrication: Room-Acoustical Information of Diffuse Respondent Panels
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 364-369
doi	https://doi.org/10.52842/conf.acadia.2008.364
summary	In this research project we explore the defined design and application of digitally fabricated wall panels for room-acoustical architectural interventions. In Particular, we investigate the room-acoustical criteria applying to everyday used spaces. We present a digital design and fabrication process developed to create non-standardised panels and two case studies which apply this process on the acoustical improvement of a specific room situation. Our aim is to find correlations between digitally fabricated surface structures and sound- aesthetical characteristics, in order to utilise these for the architectural design.
keywords	Acoustics; Digital Fabrication; Evaluation; Material; Robotics
series	ACADIA
last changed	2022/06/07 07:54

_id	cdc2008_129
id	cdc2008_129
authors	Breen, Jack and Julian Breen
year	2008
title	The Medium Is the Matter: Critical Observations and Strategic Perspectives at Half-time
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 129-136
summary	This paper critically re-views the professional impact and functionality of the pervasive digital ‘matter’ we have come to believe we can no longer do without. On the basis of a playful exploration of the first ‘half-century’ of our digital age, an attempt is made to draw new perspectives for the next ’level’ of our digital culture in a broader (multi)media perspective and more specifically: the domains of Architecture. To stimulate an open-minded ‘second-half’ debate, the paper puts forward some potentially promising (and hopefully provocative) conceptions and strategies for imaginative interface applications and game-based architectural study initiatives. Furthermore, the paper proposes the establishment of a new cultural platform for the exchange of Critical Digital hypotheses and the evolvement of visionary design concepts through creative digital innovation, with the (inter)active involvement of older and younger team-players…
email
last changed	2009/01/07 08:05

_id	ecaade2008_005
id	ecaade2008_005
authors	Breen, Jack; Stellingwerff, Martijn
year	2008
title	Capital A to Z
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 759-766
doi	https://doi.org/10.52842/conf.ecaade.2008.759
summary	Throughout the history of architecture, the Capital – the intermediate between a column and the beam or surface it supports – has been a recurring feature in architectural composition and articulation. In this paper we describe results and findings from the Capital A to Z exercise within the Ornamatics Course from the TU-Delft MSc curriculum. We will show how this exercise combines various digital and physical processes for form finding and how further insights can come from the actual production of models and prototypes. Conclusions will be drawn regarding the integrated educational setup and regarding the influence of different methods and tools on the design process and the design results.
keywords	Computer aided manufacturing and modelling, composition, prototyping, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: