Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 488

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2016_027
id	ascaad2016_027
authors	Cocho-Bermejo, Ana
year	2016
title	Time in Adaptable Architecture - Deployable emergency intelligent membrane
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 249-258
summary	The term "Parametricism" widespread mainly by Patrick Schumacher (Schumacher, 2008) is worthy of study. Developing the concept of Human Oriented Parametric Architecture, the need of implementing time as the lost parameter in current adaptive design techniques will be discussed. Morphogenetic processes ideas will be discussed through the principle of an adaptable membrane as a case study. A model implementing a unique Arduino[i] on the façade will control its patterns performance through an Artificial Neural Network that will understand the kind of scenario the building is in, activating a Genetic Algorithm that will optimize the insulation performance of the ETFE pillows. The system will work with a global behavior for façade pattern performance and with a local one for each pillow, giving the option of individual sun-shading control. Machine learning implementation will give the façade the possibility to learn from the efficacy of its decisions through time, eliminating the need of a general on-off behavior.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	acadia08_200
id	acadia08_200
authors	Sach, Edgar
year	2008
title	Synthesis of Form, Structure and Material: Design for a Form-Optimized Lightweight Membrane Construction
doi	https://doi.org/10.52842/conf.acadia.2008.200
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 200-207
summary	The design for the Cologne Elephant House is the lightweight, membrane construction of a transparent “roof cloud” over a free plan geometry. This was made possible through the use of a new form-optimization method for structural calculations (SLang)1 and the use of ETFE Fluoropolymer sheeting for the roof material.
keywords	Generative; Material; Optimization; Spaceframe; Structure
series	ACADIA
last changed	2022/06/07 07:56

_id	bbc9
id	bbc9
authors	Aeck, Richard
year	2008
title	Turnstijl Houses & Cannoli Framing
source	VDM Verlag Dr. Muller Aktiengesellschaft Co. KG, Germany ISBN: 3639078470 ISBN-13: 9783639078473
summary	This work presumes that integrating modeling tools and digital fabrication technology into architectural practice will transform how we build the detached house. Single-family houses come in all shapes and sizes, and in doing so, imply variation as well in certain materials, methods, and lighter classes of structure. Ultimately, houses are extensions, if not expressions, of those dwelling within, yet our attempts to produce appealing manufactured houses have prioritized standardization over variation and fall short of this ideal. Rather than considering new offerings born of the flexibility and precision afforded by digital production, sadly, today’s homebuilders are busy using our advancing fabrication technology to hasten the production of yesterday’s home. In response to such observations, and drawing upon meta-themes (i.e., blending and transition) present in contemporary design, this study proposes a hybrid SIP/Lam framing system and a corresponding family of houses. The development of the Cannoli Framing System (CFS) through 3D and physical models culminates in the machining and testing of full-scale prototypes. Three demonstrations, branded the Turnstijl Houses, are generated via a phased process where their schema, structure, and system geometry are personalized at their conception. This work pursues the variation of type and explores the connection between type and production methodology. Additional questions are also raised and addressed, such as how is a categorical notion like type defined, affected, and even “bred”?
keywords	Digital Manufacturing, Type, Typology, CNC, SIP, SIPs, Foam, PreFab, Prefabrication, Framing, Manufactured House, Modular, Packaged House, Digital, Plywood, Methodology
series	thesis:MSc
type	normal paper
email
more	http://branchoff.net
last changed	2010/11/16 08:29

_id	ddss2008-25
id	ddss2008-25
authors	Antoni, Jean-Philippe; P. Frankhauser, C. Tannier, S. Youssoufi
year	2008
title	Simulating and assessing prospective scenariosA comparative approach in urban planning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The first part of the paper is centred on the phenomena of urban growth, in order to set the rules for a sustainable scenario of urban development. Then we enter the core of the paper that is the comparison of models. For each of the three compared models, we describe its main theoretical characteristics, the chosen parameters, and the obtained results. In section 6, heterogeneity of the produced results is discussed, and we highlight the points of interest and the lacks of the three models. Here we show that results we obtained feed debates about urban growth management. Finally, concluding remarks at the end of the paper address the general topic of the evaluation of the quality of simulation results.
keywords	Urban sprawl, sustainable development, fractals, cellular automata, spatial interaction models
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_160
id	ecaade2008_160
authors	Aschwanden, Gideon; Halatsch, Jan; Schmitt , Gerhard
year	2008
title	Crowd Simulation for Urban Planning
doi	https://doi.org/10.52842/conf.ecaade.2008.493
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 493-500
summary	This paper presents a semi-automatic visualization method for the evaluation of urban environments that is based on artificial intelligence. It proposes the use of agent-based crowd simulation software on a mid-scale urban planning level for design evaluation. The information on agents’ movements is noted in standard raster images. The results are maps that are easy to understand. These maps show movement paths of the agents and density and give further conclusion on bottlenecks in planning contexts. Key measures, like the occupant movement in a given district, until now relied greatly on empirical knowledge or data that could be only gathered after an urban design had become built reality. Our method focuses on the adaptation of common software technology that is originally situated in film and TV productions. A practical workflow shows how our method can be easily integrated in daily design tasks.
keywords	Artificial intelligence, agent-based, crowd simulation, urban planning, design evaluation, occupant movement
series	eCAADe
email
last changed	2022/06/07 07:54

_id	barakat_theses_eaea2007
id	barakat_theses_eaea2007
authors	Barakat, Husam
year	2008
title	Analytical Study of the Projects of Students in the Architectural Design - Comparision Between Physical and Digital Models
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Since its foundation in 1981, Architectural faculty has adopted traditional teaching methods for practical subjects such as architectural design and Urban planning. In these subjects, students submitted their projects and exams on (chanson) and (calk) sheets using various drawing tools. Such tools are still in use by students up to date in manually architectural concept presentation. This comes after the students pass a number of subjects related to art and engineering drawing that help the students in gaining drawing representation and rendering skills.
keywords	architectural concept, traditional teaching, computer technology
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ddss2008-09
id	ddss2008-09
authors	Bates-Brkljac, N.
year	2008
title	Towards client-focused architectural representationsas a facilitator for improved design decision-makingprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper focuses on architectural representations as a means of communicating design schemes in the process of decision-making. It reports on the study, which investigated people’s responses to different forms of architectural representations. The paper starts with the discussion about participation in decision-making process and the potential benefits of using computer generated representations. Then, it describes the research study and examines results of the investigation. In the final section it is argued that client focused architectural representations are needed to support the exchange of views and discussion amongst different stakeholders in order to reduce the requirement for trained interpretation and encourage the participation in the decision making process.
keywords	Architectural representations, Perceived credibility, Design decision making
series	DDSS
last changed	2008/09/01 17:06

_id	acadia11_242
id	acadia11_242
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2011
title	Parametric Robot Control: Integrated CAD/CAM for Architectural Design
doi	https://doi.org/10.52842/conf.acadia.2011.242
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 242-251
summary	Robots are gaining popularity in architecture. Snøhetta has recently purchased their own industrial robot, becoming one of the first architectural offices to adopt robot technology. As more and more architects are exposed to robotic fabrication, the need for easy interoperability, integration into architectural design tools and general accessibility will increase. Architects are discovering that industrial robots are much more than kinematic machines for stacking bricks, welding or milling - they are highly multifunctional and can be used for a huge variety of tasks. However, industry standard software does not provide easy solutions for allowing direct robot control right from CAAD (Computer Aided Architectural Design) systems. In this paper we will discuss existing methods of programming industrial robots, published architectural results (Gramazio and Kohler 2008) and the design of a new user interface that allows intuitive control of parametric designs and customized robotic mass production, by integrating CAM (Computer Aided Manufacturing) functions into CAAD.
keywords	robot programming; parametric design; mass customization; grasshopper component design; fabrication; robot milling; digital architecture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ddss2008-36
id	ddss2008-36
authors	Burger, J.; R.P. de Graaf, and G.J. Helmerhorst
year	2008
title	Dynamic Actor Network Steering And ControlManaging Actor Networks In The Construction Process
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
keywords	Multi-actor, network planning, critical path, linear programming
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-24
id	ddss2008-24
authors	Chaabouni, S.; J.C. Bignon and G. Halin
year	2008
title	Luminous ambience designNavigation and reasoning by photographic images forformulation of intentions
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In order to assist daylight ambience design by referential procedures, we propose in this article an analysis of the modalities of reference activity in the field of architectural design. We have identified three different activities: selecting a potential reference, projection of the reference in the project, integration of the reference into the project, allowing intentions formulation. We have used the results of this analysis to propose navigation modes adapted to an exploitation of image references in design, in order to develop a tool supporting the formulation of luminous ambience intention. The purpose here is to inform on exploratory progress more than to communicate attested results.
keywords	Luminous ambience, Design, Reasoning, References, Navigation, intentions formulation
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_43_session4b_350
id	caadria2008_43_session4b_350
authors	Chen, Rui; Xiangyu Wang
year	2008
title	Tangible Augmented Reality for Design Learning: An Implementation Framework
doi	https://doi.org/10.52842/conf.caadria.2008.350
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 350-356
summary	Nowadays, it is becoming more and more popular for teaching and learning to be supported in technology-supported settings. These digital technologies create new instructional methods. Tangible Augmented Reality (AR) technology can construct an innovative and interactive learning space by merging computer-generated learning materials and stimuli of virtuality into a real space. Different cognitive and social-learning processes might be involved with different learning activities that can be potentially supported by different technology modes of tangible AR. This paper discusses an empirical research framework for designing and implementing tangible AR technologies to improve the pedagogical effectiveness of learning processes involved in architectural design education. The research framework includes the theoretical process of applying tangible AR in design learning, the devised experimentations and associated methodology. Issues and benefits of incorporating tangible AR into architectural design learning are also investigated and discussed.
keywords	Augmented Reality, architectural design learning, framework, learning theory, tangible interface
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ddss2008-32
id	ddss2008-32
authors	Chiaradia, Alain; Christian Schwander, Jorge Gil, Eva Friedrich
year	2008
title	Mapping the intangible value of urban layout (i-VALUL): Developing a tool kit for the socio-economic valuation of urbanarea, for designers and decision makers
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper we present the development of a GIS tool kit for the socioeconomic valuation of urban areas towards the creation of sustainable communities, describing the project context, development process, the tool kit’s structure, its main tools and initial feedback from its use. We then present the plan for training sessions and pilot projects where the tool kit is going to be used, and conclude with the discussion of the development of a single integrated tool to be used beyond the life of the ‘i-VALUL’ project. This project was supported by the UCL led UrbanBuzz programme within which UEL is a prime partner.
keywords	Urban planning, spatial analysis, design support tools, evaluation system, GIS
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_126
id	ecaade2008_126
authors	Chin, Chi-Ping
year	2008
title	Contextual Bricks
doi	https://doi.org/10.52842/conf.ecaade.2008.913
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 913-920
summary	Based on the importance of human behavior analysis in HCI research, this paper discusses the property of interaction in sending/receiving direction with diverse cases. A unit of contextual bricks was created as research model continuing to discover the possible solution on the problem that how to merge the novel media and technology into our living space invisibly with the exhibition of appropriate information. The prototype of contextual bricks preserved the characteristic of stability with cellular hexagonal structure, and each unit was designed with communicable construction. The people could get the contextual information from other spaces as seeing through the walls. In the future study, the contextual bricks have good applied possibility and developments in each kind of areas.
keywords	Context-aware, Ambient Intelligence, Context information interface, Interaction design, Communication design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cdc2008_377
id	cdc2008_377
authors	Conrad, Erik
year	2008
title	Rethinking the Space of Intelligent Environments
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 377-382
summary	Technologies are not mere exterior aids but interior changes of consciousness that shape the way the world is experienced. As we enter the age of ubiquitous computing, where computers are worn, carried or embedded into the environment, we must be careful that the ideology the technology embodies is not blindly incorporated into the environment as well. As disciplines, engineering and computer science make implicit assumptions about the world that conflict with traditional modes of cultural production. Space is commonly understood to be the void left behind when no objects are present. Unfortunately, once we see space in this way, we are unable to understand the role it plays in our everyday experience. In this paper, I argue that with the realization of the vision of ubiquitous computing, the fields of computer science and engineering reify the dominance of abstract space in real space. A new approach to the design of computing systems is necessary to reembody space. The social nature of the interface allows us to situate it within Henrí Lefebvre’s notions of space, providing new tools for thinking about how computing practice engages space as well as opening avenues to rematerialize the environment through embodied interaction.
email
last changed	2009/01/07 08:05

_id	ecaade2008_198
id	ecaade2008_198
authors	Crotch, Joanna; Mantho, Robert
year	2008
title	Media, Technology and Teaching
doi	https://doi.org/10.52842/conf.ecaade.2008.293
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 293-300
summary	With the growing reliance on technology and other visual media to explore architectural ideas, has architectural pedagogy realigned itself with the evolving possibilities of the new technological age? With the above in mind, we designed a program to explore and test this question. The programs encouraged experimentation and speculation. Technology was seen to be central to the program. The starting point was the selection of an activity. Each stage of the process required the student to firstly, carefully observe, then to create an image utilizing different ‘medium’ to realize their observations. The chosen mediums were cubism, movie making and digital imaging. Conventional plans and sections were required to be made of each final outcome, of each stage. As part of and in response to each progressive stage, a space to house an element of the activity was designed. The concluding part required the design of a small urban building to accommodate the activity selected.
keywords	Pedagogy, Architecture, Technology, Spatialization, Exploration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2008_073
id	ecaade2008_073
authors	Dalla Vecchia, Luisa; da Silva, Adriane; Pereira , Alice
year	2008
title	Teaching/Learning Architectural Design Based on a Virtual Learning Environment
doi	https://doi.org/10.52842/conf.ecaade.2008.801
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 801-808
summary	This paper describes an experiment in which a virtual learning environment was used in the context of an architectural design course. The objective was to evaluate the capability of the learning environment used to support the interactions needed, between teacher-student and between students, for the establishment of a process of discussion and development of architectural design. Some limitations imposed either by the virtual learning environment or by the context of the experiment itself were identified and also positive points, such as the possibility to register the whole design process. All this data subside studies about the process of teaching/learning architectural design validating this experiment and allowing the promotion of new experiments in the different stages of this academic process.
keywords	architectural design, technology in education, virtual learning environment
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ddss2008-05
id	ddss2008-05
authors	De Vries, Bauke; Yuzhong Lin and Joran Jessurun
year	2008
title	Sense-of-the-City
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Sense-of-the-City was a project that was executed in the city centre of Eindhoven using mobile phones with GPS. Ten persons carried this equipment during the working day for a period of one week. While carrying their route was traced and projected on a map that could be viewed on the internet. The citizens were asked to pictures of places of interest. These pictures are uploaded to the server and attached to the route. Later on text can be added to each picture through the website. All participants showed a high level of engagement in the project. Although the logbooks of the routes that were created on the web provided very personal insights, it was very hard to draw conclusions from these data.
keywords	Location Based Systems, Neighbourhood planning, Citizen engagement
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

_id	732b
id	732b
authors	Dimitris Papanikolaou
year	2008
title	From Representation of States to Description of Processes
source	Proceedings of 1st International Conference: Critical Digital, Cambridge, MA: Harvard University, 2008: 311-318
summary	Introduction of digital technologies in architecture has generated a great amount of hesitation and criticism about the role of design and its relation to the artifact. This confusion seems to stem from the dual nature of design as representation of the form and as a description of its production process. Today architects urge to adopt digital tools to explore complex forms often without understanding the complexity of the underlying production techniques. As a consequence, architects have been accused of making designs that they do not know how to build. Why is this happening today? It seems that while technology has progressed, the design strategy has remained the same. This paper will deal with the following question: What matters in design? The paper will reveal fundamental problems, attempt to answer this question, and suggest new directions for design strategies today. The conclusion of this paper is that digital design should also aim to describe process of production rather than solely represent form.
keywords	Description, Artifact, Digital, Process, Assembly, Value Chain
series	other
type	normal paper
email
last changed	2008/06/16 21:08

For more results click below: