Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 476

Reformat results as: short short into frame detailed detailed into frame

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

_id	acadia08_066
id	acadia08_066
authors	Ahlquist, Sean; Moritz Fleischmann
year	2008
title	Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
doi	https://doi.org/10.52842/conf.acadia.2008.066
summary	A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords	Biology; Computation; Material; Parametric; System
series	ACADIA
last changed	2022/06/07 07:54

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	barakat_theses_eaea2007
id	barakat_theses_eaea2007
authors	Barakat, Husam
year	2008
title	Analytical Study of the Projects of Students in the Architectural Design - Comparision Between Physical and Digital Models
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Since its foundation in 1981, Architectural faculty has adopted traditional teaching methods for practical subjects such as architectural design and Urban planning. In these subjects, students submitted their projects and exams on (chanson) and (calk) sheets using various drawing tools. Such tools are still in use by students up to date in manually architectural concept presentation. This comes after the students pass a number of subjects related to art and engineering drawing that help the students in gaining drawing representation and rendering skills.
keywords	architectural concept, traditional teaching, computer technology
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	acadia08_082
id	acadia08_082
authors	Del Campo, Matias; Sandra Manninger
year	2008
title	Speculations on Tissue Engineering and Architecture
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 82-87
doi	https://doi.org/10.52842/conf.acadia.2008.082
summary	The main aim of this paper is to speculate on opportunities inherent in the field of tissue engineering, for possible applications in the discipline of architecture. Engineered solutions based on the discoveries within the discipline of Tissue engineering can yield novel building materials and construction methods. These entire conjectures mean a different approach to the trajectories of architectural production, abandoning mechanical solutions for architecture problems in favor of biological, organ driven architectonic conditions.
keywords	Algorithm; Construction; Digital Fabrication; Material; Topology
series	ACADIA
last changed	2022/06/07 07:55

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	ecaade2008_192
id	ecaade2008_192
authors	Fioravanti, Antonio
year	2008
title	An e-Learning Environment to Enhance Quality in Collaborative Design
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 829-836
doi	https://doi.org/10.52842/conf.ecaade.2008.829
summary	The research project is aimed at enhancing the overall quality of buildings through a suitable exercise of design collaboration, and a delocalized cross-disciplinary learning for university students in the faculties of Architecture and Engineering. The research defines methods, techniques and ICT programs to provide education in the culture and exercise of collaboration for future professionals and technicians who operate in the field of the design and construction of complex building systems.
keywords	Collaborative Design, e-learning, knowledge bases, ontologies, multi-agent system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
doi	https://doi.org/10.52842/conf.acadia.2008.072
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	ecaade2008_178
id	ecaade2008_178
authors	Kolarevic, Branko
year	2008
title	Architecture in the Post-Digital Age: Towards Integrative Design
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 653-658
doi	https://doi.org/10.52842/conf.ecaade.2008.653
summary	For many, integration within the building industry is an inevitable outcome as architecture, engineering, and construction enter a ‘post-digital’ age. This paper argues that the challenge is to avoid closed systems of integration and to keep integrative tendencies as open as possible, conceptually and operationally. An alternative vision of integrated design is proposed that is more open, fluid, pliable, and opportunistic in its search of collaborative alliances and agendas. This alternative approach is referred to as integrative design, in which methods, processes, and techniques are discovered, appropriated, adapted, and altered from ‘elsewhere’, and often ‘digitally’ pursued.
keywords	Integrated design, integrative design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2008_166
id	sigradi2008_166
authors	Papanikolaou, Dimitris
year	2008
title	Digital Fabrication Production System Theory: Towards an Integrated Environment for Design and Production of Assemblies
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	A Digital Fabrication Production System (DFPS) is a concept describing a set of processes, tools, and resources that will be able to produce an artifact according to a design, fast, cheap, and easy, independently of location. A DFPS project is a complex assembly of custom parts that is delivered by a network of fabrication and assembly processes. This network is called the value chain. The workflow concept of a DFPS is the following: begin design process with a custom geometric form; decompose it into constructible parts; send the part files for fabrication to various locations; transport all parts at the construction site at the right time; finally, assemble the final artifact. Conceptually it means that based on a well structured value chain we could build anything we want, at anyplace, at controllable cost and quality. The goals of a DFPS are the following: custom shapes, controllable lead time, controllable quality, controllable cost, easiness of fabrication, and easiness of assembly. Simply stated this means to build any form, anywhere, accurately, cheap, fast, and easy. Unfortunately, the reality with current Digital Fabrication (DF) projects is rather disappointing: They take more time than what was planned, they get more expensive than what was expected, they involve great risk and uncertainty, and finally they are too complex to plan, understand, and manage. Moreover, most of these problems are discovered during production when it is already late for correction. However, there is currently no systematic approach to evaluate difficulty of production of DF projects in Architecture. Most of current risk assessment methods are based on experience gathered from previous similar cases. But it is the premise of mass customization that projects can be radically different. Assembly incompatibilities are currently addressed by building physical mockups. But physical mockups cause a significant loss in both time and cost. All these problems suggest that an introduction of a DFPS for mass customization in architecture needs first an integrated theory of assembly and management control. Evaluating feasibility of a DF project has two main problems: first, how to evaluate assemblability of the design; second, how to evaluate performance of the value chain. Assemblability is a system’s structure problem, while performance is a system’s dynamics problem. Structure of systems has been studied in the field of Systems Engineering by Network Analysis methods such as the Design Structure Matrix (DSM) (Steward 1981), and the liaison graph (Whitney 2004), while dynamics of systems have been studied by System Dynamics (Forrester 1961). Can we define a formal method to evaluate the difficulty of production of an artifact if we know the artifact’s design and the production system’s structure? This paper formulates Attribute Process Methodology (APM); a method for assessing feasibility of a DFPS project that combines Network Analysis to evaluate assemblability of the design with System Dynamics to evaluate performance of the value chain.
keywords	Digital Fabrication, Production System, System Dynamics, Network Analysis, Assembly
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia08_346
id	acadia08_346
authors	Von Buelow, Peter
year	2008
title	Breeding Topology: Special Considerations For Generative Topology Exploration Using Evolutionary Computation
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 346-353
doi	https://doi.org/10.52842/conf.acadia.2008.346
summary	Topology optimization of engineering structures has long been a topic of research scrutiny. Many methods have been successfully developed for the determination of continuum structures. Some of these techniques, for example the homogenous method, have also been adapted for use with discrete structural frames or trusses. Most commonly the topology optimization of truss structures is carried out with the aid of a ground structure, a simple raster that describes potential joint locations. Although this simplifies the computation, it greatly limits the range of potential solutions that fit the gridded raster. Additionally, when using Evolutionary Computation (EC) methods, the level of computational intensity increases exponentially with the size of the ground structure making anything above a very modest level of complexity impractical to process. ¶ This paper demonstrates several practical techniques that can be used with EC, and more specifically Genetic Algorithms, when applied to topology exploration of discrete structures. First a method of chromosome coding that avoids the use of ground structures is shown. Then specific genetic recombination techniques are illustrated that are well suited for breeding different topologies. The combined techniques are demonstrated in a topology design problem. The paper concludes with a discussion of advantages of EC over traditional optimization methods in the area of overall form design.
keywords	Algorithm; Evolution; Generative; Genetic; Topology
series	ACADIA
last changed	2022/06/07 07:58

_id	acadia08_182
id	acadia08_182
authors	Gibson, Michael; Kevin R. Klinger; Joshua Vermillion
year	2008
title	Constructing Information: Towards a Feedback Ecology in Digital Design and Fabrication
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 182-191
doi	https://doi.org/10.52842/conf.acadia.2008.182
summary	As strategies evolve using digital means to navigate design in architecture, critical process-based approaches are essential to the discourse. The often complex integration of design, analysis, and fabrication through digital technologies is wholly reliant upon a process-basis necessitating the use of a design feedback loop, which reinforces critical decision-making and challenges the notions of how we produce, visualize, and analyze information in the service of production and assembly. Central to this process-based approach is the effective and innovative integration of information and the interrogation of material based explorations in the making of architecture. This fabrication ‘ecology’ forces designers to engage complexity and accept the unpredictability of emergent systems. It also exposes the process of working to critique and refine feedback loops in light of complex tools, methods, materials, site, and performance considerations. In total, strategies for engaging this ‘ecology’ are essential to accentuate our present understanding of environmental design and theory in relation to digital processes for design and fabrication. ¶ This paper recounts a design/fabrication seminar entitled “Constructing Information” in which architecture students examined an environmental design problem by way of the design feedback loop, where their efforts in applying digital design and fabrication methods were driven explicitly by material and site realities and where their work was executed, installed, and critically explored in situ. These projections raise important questions about how information, complexity, and context overlay and merge, and underscore the critical potential of visual, spatial, and material effects as part of a fabrication-oriented design process.
keywords	Digital Fabrication; Ecology; Environment; Feedback; Performance
series	ACADIA
last changed	2022/06/07 07:51

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	ecaade2008_113
id	ecaade2008_113
authors	Montenegro, Nuno C.; Duarte , José Pinto
year	2008
title	Towards a Computational Description of Urban Patterns
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 239-248
doi	https://doi.org/10.52842/conf.ecaade.2008.239
summary	This study is concerned with the formulation of solutions for urban problems. It departs from Alexander’s pattern language theory and urban design guidelines, to create a system for generating specifications or the ingredients of a plan, given a scale, a site and a community. It takes into account strategies, regulations, guidelines, physical features of the site, and furthermore, the social, cultural and economic characteristics of the population. This system, sorted by a sequence of events, through stages, categories, methods and agents, describes taxonomic levels and their inner relations. Such an ontology provides a pattern encoding structure towards a computational model within the capabilities provided by the spatial data modeling of GIS (GIS-O). The urban formulation model is conceived to increase qualitative inputs, reducing ambiguities, through a flexible while automate process applied to urban planning.
keywords	Urban Formulation, Ontology, Pattern Language, GIS interoperability
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2008_097
id	sigradi2008_097
authors	Nogueira de Carvalho, Ana Paula; Marcelo Tramontano, Marlon Rubio Longo
year	2008
title	D.O.S. Designers on Spot: Communication processes and Learning actions [Processos de Comunicação e Ações de Aprendizagem]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	D.O.S. Designers on Spot: Communication processes and Learning actions This paper introduces some concepts that have been studied at D.O.S. project as part of the learning and communication actions. These concepts are relevant to the project as they brought to the team some improvements about design experiences based on network communication, as well as some reflections done by designers and researchers in different parts of the world. The project proposed by our research group is part of growing demands for experiments able to explore the Advanced Internet for fast transferring large packages of content. The activities are divided in two different instances: one is called exploratory research and aims to identify enrichments that a collaborative practice would add to the design process and to the production of interactive prototypes as well. The other one is related to remote learning strategies. It aims at investigating new methods of collective design and prototyping of objects with integrated media, and the diffusion of these techniques and methods in classroom environments, as a teaching strategy. Following are three different aspects about design experiences. The first one, called communication processes, presents a panoramic view about different ways the participants of a remote design session can share information. It targets to point and to systematize design actions by exploring transversal characteristics among designers, teams and the resulting objects. In order to achieve it, we have to understand some relations between remote communication and design processes, which explore issues in the project phases of conception, production and interaction. This exploration is part of the search for a conceptual scope for the D.O.S. project development, with an emphasis on the communication specificities between remote designers and the design process. The second one, learning action processes, introduces some issues about academic teaching and learning of design through remote and collaborative media. The third one, Virtual Design Studio (VDS), is related to the previous and aims to present a specific kind of remote design sessions targeting to create strategies to use new communication and information technologies (ICT) on remote project instances. The teaching of Architecture and Design is, above all, multidisciplinary – this means that it is not limited to the knowledge of one field of activity but, by a wide range of subjects from different areas - including Computing. The introduction of ICT (Information and Communication Technologies) in the project process is commonly associated to the final stages, and not to the creation. The contribution of the digital environment is provided for the use of various software, which are not restricted to those responsible for graphical representation: programs responsible for the organization of data in tables, for example, enable monitoring developments with clarity. The multidisciplinary consideration supports new variables in the process of design, working quickly and accurately on the possibilities, which modifies the agency of decisions and management tasks.
keywords	Advanced internet, collaborative design, virtual design studio
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ecaade2008_010
id	ecaade2008_010
authors	R. Lyon , Eduardo
year	2008
title	CAD and CAM Systems Integration:
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 837-844
doi	https://doi.org/10.52842/conf.ecaade.2008.837
summary	CAM systems traduce design information from CAD systems in to different manufacturing routines in order to produce NC code for CNC machinery. The output from the CAM software is usually a simple text file of G and M code, usually containing thousand of lines of code. Later this code is transferred to a machine tool using a direct numerical control (DNC) program. This translation process becomes extremely important in developing a digital design and fabrication approach. Consequently the aim in this research is; to investigate CAD-CAM workflow; to analyze final product deviation from design intent; and to determine where in the workflow, and how design strategies and design decisions correlates to manufacturing results.
keywords	Design Computing, CAD and CAM integration, Digital fabrication
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia08_142
id	acadia08_142
authors	Sprecher, Aaron; Paul Kalnitz
year	2008
title	Degrees and Switches
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 142-151
doi	https://doi.org/10.52842/conf.acadia.2008.142
summary	In recent years, evolutionary biology has been the focus of post-Darwinist theories superseding the mere notion of variation with a concept called evolutionary development. The theory of evolutionary development, commonly referred to as evo-devo, follows a series of observations on the nature of organic developments and natural morphologies. Its main contribution rests on an evolutionary model that considers the similarities of genetic material forming organisms and their differences in morphological development due to switching mechanisms between the assigned genes. As observed by the American biologist Sean Carroll, evolution follows regulatory sequences of selector genes that are similar and can be found across various species of insects, plants and animals. ¶ This observation represents a counter-proposal to the old-modern evolutionary theories that looked at processes of adaptation as a function of the emergence of new genes. Evo-devo, on the contrary, recognizes that morphological differences are triggered by recombinatory switches that re-arrange genes in manifold ways to produce numerous characteristics of adaptation. ¶ From a design point of view, evo-devo has tremendous implications because it suggests that generative design protocols may induce sets of similar operations, yet stimulate a wide range of morphologies according to their sequential arrangements and activities. These generative design strategies include, among others, computational methods such as structural shape annealing and object-oriented analysis and design. While these methods are now integrating computing design practices, it is here proposed to review these two computational design methods in the context of three research projects.
keywords	Algorithm; Evolution; Genetic; Object-Oriented; Stochastic
series	ACADIA
last changed	2022/06/07 07:56

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cdc2008_377
id	cdc2008_377
authors	Conrad, Erik
year	2008
title	Rethinking the Space of Intelligent Environments
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 377-382
summary	Technologies are not mere exterior aids but interior changes of consciousness that shape the way the world is experienced. As we enter the age of ubiquitous computing, where computers are worn, carried or embedded into the environment, we must be careful that the ideology the technology embodies is not blindly incorporated into the environment as well. As disciplines, engineering and computer science make implicit assumptions about the world that conflict with traditional modes of cultural production. Space is commonly understood to be the void left behind when no objects are present. Unfortunately, once we see space in this way, we are unable to understand the role it plays in our everyday experience. In this paper, I argue that with the realization of the vision of ubiquitous computing, the fields of computer science and engineering reify the dominance of abstract space in real space. A new approach to the design of computing systems is necessary to reembody space. The social nature of the interface allows us to situate it within Henrí Lefebvre’s notions of space, providing new tools for thinking about how computing practice engages space as well as opening avenues to rematerialize the environment through embodied interaction.
email
last changed	2009/01/07 08:05

_id	ecaade2008_086
id	ecaade2008_086
authors	Elsen, Catherine; Juchmes, Roland; Kubicki, Sylvain; Leclercq, Pierre
year	2008
title	DCDS – Distant Collaborative Design Studio
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2008.325
summary	This paper introduces new supporting tools in the field of distant collaborative design, namely DCDS and CRTI-weB. These prototypes respectively support: the early stages of design, through the support of the crucial initial step of free-hand sketches shared in real-time, and the asynchronous collaborative activities. The main goal of this paper is to propose the use of these innovative tools as an efficient and realistic way of managing long distance collaboration, to effectively serve the designers’ needs. This proposition is analyzed and addressed through a real-size experiment featuring 30 architecture and architectural-engineering students, working together in real-time at different locations (Belgium and France). This experiment and the necessary survey open up interesting fields of investigation, such as the relevance of the proposed services in supporting distant collaborative design in architecture and the benefit this represents for students to merge the IT aspects and the design studio. The methodology and the replicability are analyzed to increase the level and quality of formation of our students and, finally, a criticism of the tools confirms a benefit for the developing teams.
keywords	Distant collaborative design, sketch support systems, asynchronous collaborative activities
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: