Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 489

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2008_33_session4a_271
id	caadria2008_33_session4a_271
authors	Fukuda, Tomohiro; Atsuko Kaga, Takanori Terashima
year	2008
title	Citizen participatory design method using VR and A Blog
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 271-277
doi	https://doi.org/10.52842/conf.caadria.2008.271
summary	This research concerned the establishment of a citizen participatory design method using VR and CGM. For this, problems in the citizen participatory design are addressed, and the continuous study method using VR and a blog is shown. Then, evaluation is conducted by considering an actual design project as a case study. Furthermore, VR functions needed through the case study are developed. Using this method, a small patio on which parasols were permanently and lawfully set up on a road lot was completed.
keywords	Citizen participatory design; sustainable community design; design method; Virtual Reality; blog
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2008_52_session5a_426
id	caadria2008_52_session5a_426
authors	Kaga, Atsuko; Yasuko Matsunaga, Kenichi Sakai, Tomohiro Fukuda
year	2008
title	Construction of a design support system for the public space design in which a citizen participates: The interactive design system in a workshop
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 426-432
doi	https://doi.org/10.52842/conf.caadria.2008.426
summary	Workshops are held with local residents’ participation as one technique by which residents plan roads and places along a route. Because residents without special knowledge participate in such workshops, it is necessary to show the contents intelligibly so that all participants might grasp the plan contents and examine them. Moreover, for community planning workshops, because the time during which they can be held is restricted, within that time, plan- related information must be organized efficiently for rapid examination and searching of its contents. As an interactive system, a real-time simulation (RS) is sought that allows rapid drawing and that has a structure to display the contents of a plan using a three-dimensional space model in real time. The purpose of this research is to build a system that supports environmental space design, which uses RS in the workshop, and which is applicable for evaluation of an actual street space maintenance plan.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2008_078
id	sigradi2008_078
authors	Lobos, Danny; Dirk Donath
year	2008
title	Top down and bottom up – using BIM to merge these two design strategies.
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Our current research is focused on the optimization and evaluation of the architectural building design (gestalt), related and in balance to the inner organization of a building, the floorplan layout. This paper is focused on the impact of Space Layout Planning supported by Information and Communication Technologies (ICT) applied to Architectural Design. We present an overview and wide description of the „architectural design“, the classical definition and methods; and its evolution in practice since the ICT tools impact of the last forty years. Definition such as space program, space relationships, space function are wide discussed to understand the phenomena of architectural layout design, the parameters, variables, constraints and goals of each design. Second we present the state of the art and the current techniques and approaches (optimization, generative systems, artificial intelligence, genetic algorithms, physically based modeling, etc), a classification structure is generated to visualize the areas of impact and use of each technique (different areas from architectural design). Finally we described a complete framework to research and develop our own methodologies based on a specific case of architectural design, the current CAD tools and the possible develop of new tools using the impact of BIM systems.
keywords	space layout planning, computer aided design, functional planning, architectural floor layout, design methodologies, simulation and evaluation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2008_013
id	ecaade2008_013
authors	Papanikolaou, Dimitrios
year	2008
title	Evaluating Assemblies of Planar Parts Using the Liaison Graph and System Dynamics
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 767-774
doi	https://doi.org/10.52842/conf.ecaade.2008.767
summary	Current research on design and fabrication of planar part assemblies focuses on generative design methods, leaving analysis and evaluation of assemblability to be studied with empirical methods such as physical mockups. As a consequence, there is little understanding on whether a design is assemblable, or on how much time the assembling process might take. This paper proposes a new formal method to evaluate assemblability of interlocking planar parts that uses Network Analysis to evaluate assembly structure and System Dynamics to evaluate performance of assembling process.
keywords	System Dynamics, Network Analysis, assembly, liaison graph, Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ddss2008-37
id	ddss2008-37
authors	Rodrigues, Daniel S.; Rui A.R. Ramos and José F.G. Mendes
year	2008
title	Decision support system for university campus qualityof life evaluation based on users’ perceptionA case study applied to the Campus of the University of Minho
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents the work that conduced to the development of an information system to evaluate and monitor university campi quality of life. The system embodies two main functions: to provide information to the community and to support campus planning and management. Using a scenario describing possible actions, some users evaluated how its implementation would interfere with the quality of life on the campus. Results showed that it would produce a global improvement, in comparison to the year of the study.
keywords	University Campus, Quality of Life, Decision Support System
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-12
id	ddss2008-12
authors	Tabak, V.; B. de Vries, J. Dijkstra
year	2008
title	Validating an office simulation model using RFIDtechnology
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents the validation of an office utilisation model for the research project called “User Simulation of Space Utilisation (USSU)”. The result of this research is a system that can be used for analysing and evaluating the space utilisation of a building for any given organisation. A system for building usage simulation that produces data about activities of members of an organisation can substantially improve the relevance and performance of building simulation tools. This is relevant for engineering domains as well as for architects to evaluate the performance of a building design. For a thorough evaluation of the system an experiment was executed for assessing its predictive quality in the context of a real building, organisation and actual human behaviour; this experiment was executed using RFID technology. The result of the experiment was observed data about the space utilisation of the selected organisation. These data were compared with the space utilisation predicted by the USSU system to evaluate the simulation model. The validation of USSU showed that there were no significant differences between the predicated and observed activity behaviour. As a consequence, the output of USSU is considered to be valid.
keywords	Office utilisation simulation, building simulation system, validation, RFID, space utilisation
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_094
id	ecaade2008_094
authors	Theßeling, Frank; Schlüter, Arno; Leibundgut, Hansjürg
year	2008
title	Energy and Exergy Performance as Parameters in Architectural Design Sketching -a Case Study
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 477-482
doi	https://doi.org/10.52842/conf.ecaade.2008.477
summary	Buildings account for 40% of the worldwide CO2 emissions. These emissions are directly related to their energy consumption. 80% of the design decisions impacting energy consumption are made during the first 20 % of the design process and therefore address the architect. Necessary decisions do not only concern building geometry but also materialization and building service systems. Choices in either of these fields significantly influence the future energy consumption of the building. Therefore it is necessary to support the architects’ decision-making. From the first sketch on, the evaluation of energy performance needs to be incorporated into the design process. This paper shows a method and results which where produced in a case study at the ETH Zurich by using a special tool in early design phases for energy and exergy analyses.
keywords	energy, exergy, early design phases, performance, sketching
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2008_179
id	sigradi2008_179
authors	Toloudi, Zenovia
year	2008
title	Architectural Brand valuations through a tag-based learning machine.
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Brand is a set of associations related to an object from a particular source (Libai 2008). Such an object can be a product, person or service. Architecture is both service and product. However architectural Branding has never been clearly defined. This probably happens due to the lack of tools to measure the architectural Brand. This paper explores a direction to evaluate the architectural Brand by using computational methods in order to offer a better understanding regarding the awareness, reputation and prominence of the architectural firm. The methodology is based on case studies in which the brands of different types of architectural firms are analyzed, measured and compared to each other through a two-part process: a. the development of one tool to statistically measure the architectural Brand and b. the interpretation of the results of the measurements. a. Learning machine In order to make these brand measurements within a specific group of people or images, this paper develops an interactive tool that uses an image database. The tool constitutes a learning machine; it makes a hypothetic hierarchical categorization of the image database into + and – using an initial sample and it proposes to the user the first image of the list; finally, the user validates the image by confirming or not the machine’s guess. In this image database, each image is described as an array of attributes (tags). Tags can be generated either by the architectural firm itself or can emerge by users. b. Evaluation of results This interactive, user-friendly tool is drawing a user’s preference by proposing similar images from the database based on a learning process from the user input (initial sample and feedback); alternatively, it can be used as a questionnaire for quantitative research. Moreover, this tool categorizes photos of similar content. This research focuses on the following issues as parameters of the effectiveness of the process: o Simplicity of the database organization through computation. o Top-down Vs. Bottom-up tagging of works/ images mechanism. o Future use of the image database. o Transformation of the image database while becoming larger. o “Market” segmentation or not. o Combination of the tool with other Brand measurement tools. o Combination of the tool with other image databases. The outcome of this approach can provide an analysis and metric of the brand strength of different architectural firms. Furthermore, it can help architectural firms to understand better how they are perceived by others in order to improve their brand image and associations.
keywords	Branding, learning machine, image database, attribute, tag
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ijac20076103
id	ijac20076103
authors	Tonn, Christian; Petzold, Frank; Bimber, Oliver; Grundhofer, Anselm; Donath, Dirk
year	2008
title	Spatial Augmented Reality for Architecture Designing and planning with and within existing buildings
source	International Journal of Architectural Computing vol. 6 - no. 1, pp. 41-58
summary	At present, more than half of all building activity in the German building sector is undertaken within existing built contexts. The development of a conceptual and technological basis for the digital support of design directly on site, within an existing building context is the focus of the research project "Spatial Augmented Reality for Architecture" (SAR). This paper describes the goals achieved in one aspect of the project: the sampling of colors and materials at a scale of 1:1 using Augmented Reality (AR) technologies. We present initial results from the project; the development of an ad-hoc visualization of interactive data on arbitrary surfaces in real-world indoor environments using a mobile hardware setup. With this, it was possible to project the color and material qualities of a design directly onto almost all surfaces within a geometrically corrected, existing building. Initially, a software prototype "Spatial Augmented Reality for Architecture-Colored Architecture" (SAR-CA) was developed and then assessed based on evaluation results from a user study.
series	journal
last changed	2008/06/18 08:12

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	acadia08_292
id	acadia08_292
authors	Celento, David; Del Harrow
year	2008
title	ceramiSKIN: Digital Possibilities for Ceramic Cladding Systems
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 292-299
doi	https://doi.org/10.52842/conf.acadia.2008.292
summary	CeramiSKIN is an inter-disciplinary investigation by an architect and a ceramics artist examining new possibilities for ceramic cladding using digital design and digital fabrication techniques. Research shown is part of an ongoing collaborative residency at The European Ceramics Work Centre. ¶ Ceramics are durable, sustainable, and capable of easily assuming detailed shapes with double curvature making ceramics seemingly ideal for digitally inspired “plastic” architecture. The primary reason for the decline in complex ceramic cladding is that manual mold-making is time-consuming—which is at odds with today’s high labor costs and compressed construction timeframes. We assert that digital advances in the area of mold-making will assist in removing some of the barriers for the use of complex ceramic cladding in architecture. ; The primary goals of ceramiSKIN as they relate to digitally assisted production are: greater variety and complexity, reduced cost and time, a higher degree of accuracy, and an attempt to facilitate a wider range of digital design possibilities through the use of a ceramics in architectural cladding systems. ¶ The following paper begins with an overview discussing double curvature and biophilia in architecture and their relationship to ceramics. This is followed by detailed commentary on three different experiments prior to a concluding summary.
keywords	Biomorphic; Collaboration; Complex Geometry; Digital Fabrication; Skin
series	ACADIA
last changed	2022/06/07 07:55

_id	acadia08_066
id	acadia08_066
authors	Ahlquist, Sean; Moritz Fleischmann
year	2008
title	Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
doi	https://doi.org/10.52842/conf.acadia.2008.066
summary	A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords	Biology; Computation; Material; Parametric; System
series	ACADIA
last changed	2022/06/07 07:54

_id	ddss2008-25
id	ddss2008-25
authors	Antoni, Jean-Philippe; P. Frankhauser, C. Tannier, S. Youssoufi
year	2008
title	Simulating and assessing prospective scenariosA comparative approach in urban planning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The first part of the paper is centred on the phenomena of urban growth, in order to set the rules for a sustainable scenario of urban development. Then we enter the core of the paper that is the comparison of models. For each of the three compared models, we describe its main theoretical characteristics, the chosen parameters, and the obtained results. In section 6, heterogeneity of the produced results is discussed, and we highlight the points of interest and the lacks of the three models. Here we show that results we obtained feed debates about urban growth management. Finally, concluding remarks at the end of the paper address the general topic of the evaluation of the quality of simulation results.
keywords	Urban sprawl, sustainable development, fractals, cellular automata, spatial interaction models
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_160
id	ecaade2008_160
authors	Aschwanden, Gideon; Halatsch, Jan; Schmitt , Gerhard
year	2008
title	Crowd Simulation for Urban Planning
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 493-500
doi	https://doi.org/10.52842/conf.ecaade.2008.493
summary	This paper presents a semi-automatic visualization method for the evaluation of urban environments that is based on artificial intelligence. It proposes the use of agent-based crowd simulation software on a mid-scale urban planning level for design evaluation. The information on agents’ movements is noted in standard raster images. The results are maps that are easy to understand. These maps show movement paths of the agents and density and give further conclusion on bottlenecks in planning contexts. Key measures, like the occupant movement in a given district, until now relied greatly on empirical knowledge or data that could be only gathered after an urban design had become built reality. Our method focuses on the adaptation of common software technology that is originally situated in film and TV productions. A practical workflow shows how our method can be easily integrated in daily design tasks.
keywords	Artificial intelligence, agent-based, crowd simulation, urban planning, design evaluation, occupant movement
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia08_364
id	acadia08_364
authors	Bonwetsch, Tobias; Ralph Baertschi ;Silvan Oesterle
year	2008
title	Adding Performance Criteria to Digital Fabrication: Room-Acoustical Information of Diffuse Respondent Panels
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 364-369
doi	https://doi.org/10.52842/conf.acadia.2008.364
summary	In this research project we explore the defined design and application of digitally fabricated wall panels for room-acoustical architectural interventions. In Particular, we investigate the room-acoustical criteria applying to everyday used spaces. We present a digital design and fabrication process developed to create non-standardised panels and two case studies which apply this process on the acoustical improvement of a specific room situation. Our aim is to find correlations between digitally fabricated surface structures and sound- aesthetical characteristics, in order to utilise these for the architectural design.
keywords	Acoustics; Digital Fabrication; Evaluation; Material; Robotics
series	ACADIA
last changed	2022/06/07 07:54

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss2008-33
id	ddss2008-33
authors	Charlton, James A.; Bob Giddings and Margaret Horne
year	2008
title	A survey of computer software for the urban designprocess
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Urban design is concerned with the shape, the surface and the physical arrangement of all kinds of urban elements, the basic components that make up the built environment, at the level of buildings, spaces and human activities. It is also concerned with the non-visual aspects of the environment, such as noise, wind and temperature and humidity. The city square is a particular urban element which can take many forms and its geometrical relationships such as maximum dimensions, ratio of width to length and building height to length have been analysed for centuries (Alberti 1475), (Vitruvius 1550), (Sitte 1889), (Corbett 2004). Within the current urban design process there are increasing examples of three dimensional computer representations which allow the user to experience a visual sense of the geometry of city squares in an urban landscape. Computer-aided design and Virtual Reality technologies have recently contributed to this visual assessment, but there have been limited attempts at 3D computer representations which allow the user to experience a greater sense of the urban space. This paper will describe a survey of computer tools which could support a more holistic approach to urban design and which could be used to simulate a number of urban texture and urban quality aspects. It will provide a systematic overview of currently available software that could support the simulation of building density, height, colour and style as well as conditions relating to noise, shading, heat, natural and artificial light. It will describe a methodology for the selection and filtering of appropriate computer applications and offer an initial evaluation of these tools for the analysis and representation of the three-dimensional geometry, urban texture and urban quality of city centre spaces. The paper is structured to include an introduction to the design criteria relating to city centre spaces which underpins this research. Next the systematic review of computer software will be described, and selected tools will undergo initial evaluation. Finally conclusions will be drawn and areas for future research identified.
keywords	Urban design, Software identification, 3D modelling, Pedestrian modelling, Wind modelling, Noise mapping, Thermal comfort, VR Engine
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-32
id	ddss2008-32
authors	Chiaradia, Alain; Christian Schwander, Jorge Gil, Eva Friedrich
year	2008
title	Mapping the intangible value of urban layout (i-VALUL): Developing a tool kit for the socio-economic valuation of urbanarea, for designers and decision makers
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In this paper we present the development of a GIS tool kit for the socioeconomic valuation of urban areas towards the creation of sustainable communities, describing the project context, development process, the tool kit’s structure, its main tools and initial feedback from its use. We then present the plan for training sessions and pilot projects where the tool kit is going to be used, and conclude with the discussion of the development of a single integrated tool to be used beyond the life of the ‘i-VALUL’ project. This project was supported by the UCL led UrbanBuzz programme within which UEL is a prime partner.
keywords	Urban planning, spatial analysis, design support tools, evaluation system, GIS
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_184
id	ecaade2008_184
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Fritz, Oliver; Rüdenauer, Kai; Lemmerzahl, Steffen
year	2008
title	Form Follows Structure?
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 451-458
doi	https://doi.org/10.52842/conf.ecaade.2008.451
summary	This paper can be viewed as the continued development of a research project presented at last year’s eCAADe. The project focused on the potential and possibilities of cooperation among architects, investors with concrete building projects, and researchers at the university level working on generative design and parametric construction. After having spent several years of research on design techniques in a purely academic setting at the university we see, contrary to our fears, that reality and the integration of concrete factors such as budget, time management, etc. does not diminish but rather improves the quality of our work. This work is not primarily concerned with the development of a new architectural language but the intelligent use of modern computer technology based on digitized planning processes defined as ‘complex building design’. Designs developed in this manner can be distinguished by certain characteristics, the evaluation of which is a point critically discussed in the following paper.
keywords	Generative Design, Collaborative Design, Parametric Design, User Participation in Design, Case Study, Strategic Design
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: