Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 481

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2008_35_session4a_285
id	caadria2008_35_session4a_285
authors	Pan, Cheng-A; Taysheng Jeng
year	2008
title	Exploring Sensing-based Kinetic Design for Responsive Architecture
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 285-292
doi	https://doi.org/10.52842/conf.caadria.2008.285
summary	This paper outlines the features of responsive architecture with emphasis on sensing-based kinetic design. The emphasis of our work is mainly on developing kinetic design methods that apply to responsive architecture. The kinetic design method is demonstrated by an experimental system called Mimosa. Mimosa is a responsive architecture prototype that can alter its shape in response to climate conditions. The implementation, experience, and lessons learned from the development of sensing-based kinetic design for responsive architecture will be reported in this paper.
keywords	Kinetic Design, Responsive Architecture, Smart Space
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ddss2008-38
id	ddss2008-38
authors	Schieck, Ava Fatah gen.; Alan Penn, Eamonn O’Neill
year	2008
title	Mapping, sensing and visualising the digitalco-presence in the public arena
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper reports on work carried out within the Cityware project using mobile technologies to map, visualise and project the digital co-presence in the city. This paper focuses on two pilot studies exploring the Bluetooth landscape in the city of Bath. Here we apply adapted and ‘digitally augmented’ methods for spatial observation and analysis based on established methods used extensively in the space syntax approach to urban design. We map the physical and digital flows at a macro level and observe static space use at the micro level. In addition we look at social and mobile behaviour from an individual’s point of view. We apply a method based on intervention through ‘Sensing and projecting’ Bluetooth names and digital identity in the public arena. We present early findings in terms of patterns of Bluetooth flow and presence, and outline initial observations about how people’s reaction towards the projection of their Bluetooth names practices in public. In particular we note the importance of constructing socially meaningful relations between people mediated by these technologies. We discuss initial results and outline issues raised in detail before finally describing ongoing work.
keywords	Pervasive systems, digital presence, urban encounter, digital identity
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2008_177
id	ecaade2008_177
authors	Fatah gen. Schieck, Ava
year	2008
title	Exploring Architectural Education in the Digital Age
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 861-870
doi	https://doi.org/10.52842/conf.ecaade.2008.861
summary	This paper reports on work carried out within the module ‘Digital Space & Society as part of the MSc Adaptive Architecture & Computation course at UCL. I describe my approach in investigating possibilities for integrating digital media and computation into a module taught to students coming predominantly from a design background. The teaching adopts the design studio culture, which integrates: teaching, discovery (research), and application (practice). Here I present an attempt to develop new ways that extend beyond conventionally applied methods within traditional architectural education by adopting project based learning that is carried out in the real world. The project is driven by my recent research activities. Donald Schon’s concept of the ‘knowledge in action’ provides a useful framework for interpreting my approach.
keywords	Architectural education, digital, project based, teaching & research
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	sigradi2008_097
id	sigradi2008_097
authors	Nogueira de Carvalho, Ana Paula; Marcelo Tramontano, Marlon Rubio Longo
year	2008
title	D.O.S. Designers on Spot: Communication processes and Learning actions [Processos de Comunicação e Ações de Aprendizagem]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	D.O.S. Designers on Spot: Communication processes and Learning actions This paper introduces some concepts that have been studied at D.O.S. project as part of the learning and communication actions. These concepts are relevant to the project as they brought to the team some improvements about design experiences based on network communication, as well as some reflections done by designers and researchers in different parts of the world. The project proposed by our research group is part of growing demands for experiments able to explore the Advanced Internet for fast transferring large packages of content. The activities are divided in two different instances: one is called exploratory research and aims to identify enrichments that a collaborative practice would add to the design process and to the production of interactive prototypes as well. The other one is related to remote learning strategies. It aims at investigating new methods of collective design and prototyping of objects with integrated media, and the diffusion of these techniques and methods in classroom environments, as a teaching strategy. Following are three different aspects about design experiences. The first one, called communication processes, presents a panoramic view about different ways the participants of a remote design session can share information. It targets to point and to systematize design actions by exploring transversal characteristics among designers, teams and the resulting objects. In order to achieve it, we have to understand some relations between remote communication and design processes, which explore issues in the project phases of conception, production and interaction. This exploration is part of the search for a conceptual scope for the D.O.S. project development, with an emphasis on the communication specificities between remote designers and the design process. The second one, learning action processes, introduces some issues about academic teaching and learning of design through remote and collaborative media. The third one, Virtual Design Studio (VDS), is related to the previous and aims to present a specific kind of remote design sessions targeting to create strategies to use new communication and information technologies (ICT) on remote project instances. The teaching of Architecture and Design is, above all, multidisciplinary – this means that it is not limited to the knowledge of one field of activity but, by a wide range of subjects from different areas - including Computing. The introduction of ICT (Information and Communication Technologies) in the project process is commonly associated to the final stages, and not to the creation. The contribution of the digital environment is provided for the use of various software, which are not restricted to those responsible for graphical representation: programs responsible for the organization of data in tables, for example, enable monitoring developments with clarity. The multidisciplinary consideration supports new variables in the process of design, working quickly and accurately on the possibilities, which modifies the agency of decisions and management tasks.
keywords	Advanced internet, collaborative design, virtual design studio
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ijac20076203
id	ijac20076203
authors	Ophir, Yaniv
year	2008
title	Go with the flow: particle systems for program modeling in high-rise buildings
source	International Journal of Architectural Computing vol. 6 - no. 2, pp. 171-196
summary	This paper revisits the particle flow system, a time-based computational tool, which has received a lot of attention from the early pioneers of digital architecture. The use of particle flow systems in architecture enables designers to materialize what they term as site forces which can later be formalized into a building. The methods offered by various designers for using particle flow systems in architecture have kept the discourse purely formal by focusing on the exterior and neglecting the interior. This paper offers a different way of using and conceptualizing particle flow systems in architecture. Shifting the emphasis from the formal, the paper aims to show the potential of using particle flow systems as a parametric model for exploring the spatial organization of an architectural program. This paper also illustrates the application of the proposed computational model, i.e., the particle flow system, by using a case study - the design of a high-rise building in downtown Tel Aviv, Israel.
series	journal
last changed	2008/10/01 21:49

_id	sigradi2018_1359
id	sigradi2018_1359
authors	Bertola Duarte, Rovenir; Ziger Dalgallo, Ayla; Consalter Diniz, Maria Luisa; Romão Magoga, Thais
year	2018
title	A window to the autism: the political role of the difference of an objectile in the homogeneous school
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 848-853
summary	This paper approaches the insertion of an objectile in the homogeneous space of a school, looking to bring flexibility and responsiveness to assist a user with Autism Spectrum Disorder (ASD). The research concerns with photosensitivity, a problem faced by almost 25% of the children with autism (Miller-Horn; Spence; Takeoka, 2011). The study is based on the theories for ASD environments that speak of ‘sensorial perception’ and ‘thinking with imagery’ (Mostafa, 2008), and the coexistence of Sensory Design Theory and Neuro-Typical Method (Pomana, 2015). The result consists of a gadget developed in MIT App Inventor tool and a curtain that interact responsively through an Arduino code, for a new connection between the user and his surroundings.
keywords	Objectile; Responsive Architecture; Architecture and autism; ASD; Inclusive school
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_119
id	ecaade2008_119
authors	Celento, David; Harrow, Del
year	2008
title	CeramiSKIN
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 709-716
doi	https://doi.org/10.52842/conf.ecaade.2008.709
summary	ceramiSKIN is the result of an inter-disciplinary investigation between an architect and a ceramics artist. We are exploring natural orders as generators for aperiodic (non-repeating) tiling systems in architectural ceramic cladding systems. Of particular interest are the possibilities offered by digital imaging of organic materials [at various scales from 1:1 to 1:1 nanometer] as a means of form generation. After scanning, shapes are computationally deformed to create a range of biophilic effects promulgated through unique large scale ceramic cladding systems constructed using digital fabrication techniques.
keywords	Ceramic cladding systems: biophilia in architecture, digital design, digital fabrication, mass-customization
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
doi	https://doi.org/10.52842/conf.acadia.2008.072
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	ecaade2008_070
id	ecaade2008_070
authors	Guéna, François; Untersteller, Louis-Paul
year	2008
title	Computing Different Projections of a Polyhedral Scene from a Single 2D Sketch
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 195-200
doi	https://doi.org/10.52842/conf.ecaade.2008.195
summary	This paper presents the development of a tool which is capable of compute several projections of a polyhedral scene from a single axonometric or perspective projection. This projection is hand-drawn and may be incomplete. This sketch can be rotated with a kind of trackball and the tool computes in real-time new projections. In that way the designer can choose another view from which he is able to control and complete the sketch and carry on designing. So this tool can be useful for exploring architectural forms in the early phases of the design process. Unlike others freehand sketching interfaces, the system does not operate any reconstruction in 3D. Everything is computed in a 2D world.
keywords	Architectural Design, Sketching, Projective Geometry, Duality, 3D Reconstruction
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ef93
id	ef93
authors	Krawczyk, Robert J
year	2008
title	The Codewriting Workbook: Creating Computational Architecture in AutoLISP
source	Princeton Architectural Press, New York
summary	Conceived as a primer for architects, artists and designers, The Codewriting Workbook introduces students and practitioners to basic programming concepts for computeraided design (CAD). Through a series of guided exercises using algorithmic functions, readers learn how to develop and write procedures for two-dimensional drawings and three-dimensional models. Each sequence of exercises starts with a simple concept and evolves into a family of possible solutions, including specifying and exploring a wide range of design alternatives, integrating parameters for controlling randomness, utilizing meteorological data, and developing complex patterns for laser-cutting and CNC-milling. Exercises are presented in AutoLISP, a widely accessible CAD programming environment. Forward by William J. Mitchell CD included, over 400 functions, 416 pages, 274 drawings
keywords	programming, algorithmic design, computational architecture, AutoLISP
series	book
type	normal paper
email
more	http://home.netcom.com/~codewriting/
last changed	2008/12/08 22:08

_id	acadia08_272
id	acadia08_272
authors	Perez, Santiago R.
year	2008
title	Crafting Complexity: Material / Procedure / Form
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 272-277
doi	https://doi.org/10.52842/conf.acadia.2008.272
summary	What is the role of Craft, in understanding Bio-Computational Forms & Systems? What is the relation between self-organizing systems & material-component assemblages? ¶ This paper will explore the relationship between material craft, procedure and form, in relation to complex, self-organizing assemblies. A comparison will be made, between (hand) crafted assemblies, guided by physical constraints and procedural methodologies, and digitally mediated fabrication, guided by recursion and algorithmic generative methodologies. ¶ An attempt will be made to connect various scales of making, in terms of module or unit of assembly, both at the micro-scale of biological structures, and the macro-scale of man-made systems. The goal of this essay is to question the relation between physically crafted component assemblies, as a means for exploring adaptive, complex, self-organizing systems, and bio-computational paradigms as a source of adaptive strategies for making.
keywords	Adaptation; Complexity; Craft; Material; Play
series	ACADIA
last changed	2022/06/07 08:00

_id	caadria2008_51_session5a_417
id	caadria2008_51_session5a_417
authors	Schimek, Heimo; Milena Stavric, Albert Wiltsche
year	2008
title	The Intelligence of ornaments: Exploring ornamental ways of Affordable Non-Standard Building Envelopes
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 417-425
doi	https://doi.org/10.52842/conf.caadria.2008.417
summary	The purpose of this research is to explore ornamental patterns which can be used to enhance materials characteristics in low-cost building envelopes. We use standard building materials (sheets of cross-laminated timber) and develop a parametric design framework for the assembly. Existing rules of ornamental geometry are applied to a parametric controlled structural model so as to endow the building parts both with stability and aesthetics. The concepts of mass customization and “File to factory” support the digital fabrication of a non-repetitive pattern in façade construction and lead to reduced construction costs and building time.
keywords	Ornament, symmetry, parametric design, building shell, affordable non-standard architecture, mass customization
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia08_222
id	acadia08_222
authors	Westre, Aaron
year	2008
title	Complexity Machine 1: A 3D Modeling Application Implementing Behavioral Simulation
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 222-229
doi	https://doi.org/10.52842/conf.acadia.2008.222
summary	Complexity Machine 1 is a software application developed by the author as a Master of Architecture thesis project at the University of Minnesota. The software acts as a platform for exploring three dimensional form produced via behavioral simulation. Specifically, the behaviors are modeled on emergent group dynamics found commonly in nature such as flocking, chasing, and evading. Though various commercial softwares and numerous small-scale architectural projects exist in this area, Complexity Machine 1 is intended as a freely available and generic platform for exploring the formal implications of these emergent behaviors. The simulated behaviors are governed by a variety of parameters and a set of eight simple rules. Formal results are influenced by these parameters and rules; along with scale, color, and geometric settings. The flexibility of the software allows users to investigate a vast array of potential forms, adjust settings in real time, and export the results for further manipulation. Complexity Machine 1 continues to be refined and improved towards the goal of providing an easy to use platform to designers for exploring forms that emerge from complex group behavior.
keywords	Behavior; Complexity; Emergence; Flocking; Simulation
series	ACADIA
last changed	2022/06/07 07:57

_id	caadria2008_77_session7b_635
id	caadria2008_77_session7b_635
authors	Loemker, Thorsten M.
year	2008
title	In-situ Analyses of Buildings by means of Smart Devices and Location Based Services
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 635-641
doi	https://doi.org/10.52842/conf.caadria.2008.635
summary	In this research we examined if it might be possible that a client accomplishes an ad-hoc analysis of an existing building with the intention of prospective revitalization. The aim is to give a client who incidentally faces a building the possibility to run an in situ usability simulation. To accomplish this we recommend Location Based Services that can be accessed by common remote sensing devices. These devices should automatically connect to server-based applications, which compare the requirements of the client with the existing building and run remote simulations on concrete further utilization. The newly generated information will then be passed back to the clients’ device. In the paper we address a scenario of a prospective client who visits a city where he hits on an unused building he might be interest in. The client wishes to gain immediate and accurate information if the building is able to meet his demands regarding the space needed for his company. Different techniques investigated, their assets and drawbacks will be described that could accomplish suchlike tasks.
keywords	Location Based Services, Smart Environments, Ubiquitous Computing, Optimization
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	acadia08_066
id	acadia08_066
authors	Ahlquist, Sean; Moritz Fleischmann
year	2008
title	Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
doi	https://doi.org/10.52842/conf.acadia.2008.066
summary	A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords	Biology; Computation; Material; Parametric; System
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2008_084
id	ecaade2008_084
authors	Alaçam Aslan, Sema; Çagdas, Gülen
year	2008
title	An Interface Proposal for Collaborative Architectural Design Process
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 319-324
doi	https://doi.org/10.52842/conf.ecaade.2008.319
summary	The aim of this paper is to explore how new technological opportunities affect approaches of designers during collaborative architectural design process. Which factors affect the communication and the quality of interaction? The study is based on two phases: the data input by the designer via devices to the computer environment and the transformation of data into design product in the software by scripting addition. Input devices that are used are 3D mouse, graphic tablet as a tangible interface and implementation of second mouse besides a standard mouse and keyboard. The potential usage of these interfaces in collaborative architectural design process is discussed and proposals are developed in 3ds max scripting environment.
keywords	Collaborative design, human-computer interaction, user participation in design
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: