Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2008_184
id	ecaade2008_184
authors	Fricker, Pia; Hovestadt, Ludger; Braach, Markus; Dillenburger, Benjamin; Fritz, Oliver; Rüdenauer, Kai; Lemmerzahl, Steffen
year	2008
title	Form Follows Structure?
doi	https://doi.org/10.52842/conf.ecaade.2008.451
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 451-458
summary	This paper can be viewed as the continued development of a research project presented at last year’s eCAADe. The project focused on the potential and possibilities of cooperation among architects, investors with concrete building projects, and researchers at the university level working on generative design and parametric construction. After having spent several years of research on design techniques in a purely academic setting at the university we see, contrary to our fears, that reality and the integration of concrete factors such as budget, time management, etc. does not diminish but rather improves the quality of our work. This work is not primarily concerned with the development of a new architectural language but the intelligent use of modern computer technology based on digitized planning processes defined as ‘complex building design’. Designs developed in this manner can be distinguished by certain characteristics, the evaluation of which is a point critically discussed in the following paper.
keywords	Generative Design, Collaborative Design, Parametric Design, User Participation in Design, Case Study, Strategic Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2008_17_session2a_143
id	caadria2008_17_session2a_143
authors	Kaewlai, Pornpis; Pinyo Jinuntuya, Pizzanu Kanongchaiyos
year	2008
title	Interactive Feasibility-based CAAD System for Infrastructure and Open Space Planning in Housing Project Design
doi	https://doi.org/10.52842/conf.caadria.2008.143
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 143-148
summary	The decision support system developed in this research is aimed to the conceptual scheme of project focusing on infrastructure planning and open space design in the architectural context for housing project. Alternative design sets are provided within the limitations, and possibilities to be further evaluated appropriately. This system helps architects and developers to analyze relationships of physical environment, architectural requirements and the overall of project-related factors with real-time cost estimation. Factors for cost estimation derived from the beginning to the end of project will be manipulated simultaneously. Architects and developers can use this design simulation to address the physical data with real-time cost estimation, provide alternative results, and design evaluation for overall project’s feasibility. The software of our research is not just a tool for design & planning automation in feasibility analysis. It will be an interactive decision support system for both developers and planners aspects. The system was developed by SketchUp Ruby Application Programming Interface. The results will be presented into two ways. Firstly, 2D and 3D modeling will be used for interactive visualization in design and planning of the beginning process. Subsequently, numbers and additional factors in details will be used to show relationship between architectural environment and feasibility-based information to help architects and developers collaboratively analyze the land use planning and open space design for housing project. In evaluation process, the developed software is tested with the project preceding and the future project of Bangkok area under constraints and regulations of Building Control Act of Thailand. In conclusion, this system will make effectiveness in design process and management of the construction knowledge. The decision support systems should be designed to makes explicit use of both planning analysis aspect and knowledge-based decision making.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddss2008-47
id	ddss2008-47
authors	Den Otter, Ad F. and H.J. Pels
year	2008
title	Rivalry between the collective use of IT tools and working methods of design teams Comparison of research outcomes
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods and rivalry between the collective use of IT tools in such product development. Changes in habits and preferences for collective use of IT tools might be realized by training and management power. However, adoption of collectively to be used tools, like project websites, is depending heavenly on the attractiveness for users in daily work. Based on empirical research outcomes it is indicated that rivalry between collective used tools and differences in working methods of users might be main barriers for attractiveness of these tools in daily work. Applying a framework for analyzing and categorizing of the frequency of use of IT tools for team communication, the authors explain the appearance of rivalry between tools, limiting the effectiveness in daily work and not affecting team communication and performance. By comparison of working methods in different sectors authors explain the necessity of changes in working methods in design and engineering in the building & construction industry on organizational and inter-organizational level for successful adoption of collectively to be used IT tools in team communication.
keywords	Rivalry between IT tools, collective use, team communication, team performance, working habits, preferences, working methods, 2nd order of change
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ddss2008-39
id	ddss2008-39
authors	Meshitsuka, Yusuke and Yoshitsugu Aoki
year	2008
title	Stochastic Transition of Fire-prevention Performanceof Urban Area
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The aim of this study is to analyze the tendency of building renewal in order to understand the fire prevention performance of the Tokyo metropolitan area. To this end, firstly, the Tokyo metropolitan area was divided into small areas of 250,000 square meters, and the following stochastic transition matrix of each small area was estimated, 1. Stochastic matrix of state transition between the building use types, 2. Stochastic matrix of state transition between the structures of buildings. Secondly, the converged state of each small area was estimated with a Markov chain model. Finally, small areas where fire prevention performance will change for the better/constant/worse were pointed out from their converged states. The results suggest that in small areas where percentage of housing and commerce are increasing, the fire prevention performance will become worse.
keywords	Urban Earthquake Disaster Mitigation, Earthquake Fire, Stochastic Transition Matrix
series	DDSS
last changed	2008/09/01 17:06

_id	ijac20097303
id	ijac20097303
authors	Taron, Joshua M.
year	2009
title	Interactive Hemostasis Modeling in Urban Network Design
source	International Journal of Architectural Computing vol. 7 - no. 3,375-387
summary	This paper describes a type of project that images a city as it might exist given the integration of hemostatic procedures within pedestrian networks during emergencies requiring full-scale egress from an urban core. It articulates the steps taken to integrate a pre-existing C++ hemostasis model (C. Jacob, 2008) into Maya software in order to describe how the project operates on a computational level. By projecting these agent-based logics directly into/onto each pedestrian in the city (the smallest unit of the system), egress-oriented infrastructure can shift from being extensively predetermined in form (concrete barriers, metal railing, police barricades, etc.), to something more intensively defined, real-time, and locally on-demand. These procedures are situated within a larger schema based on the structural principles of Norbert Wiener's cybernetic feedback loops, that acknowledge and allow for hybrid (top-down + bottom-up) awareness and control within systems. The project attempts to ally itself with emerging forms of network design with similar structural typologies supported through the use of personal mobile devices (PMDs) in urban environments.
series	journal
last changed	2009/10/20 08:02

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	caadria2008_24_session3a_193
id	caadria2008_24_session3a_193
authors	Biswas, Tajin; Tsung-Hsien Wang, Ramesh Krishnamurti
year	2008
title	Integrating sustainable building rating systems with building information models
doi	https://doi.org/10.52842/conf.caadria.2008.193
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 193-200
summary	The transition from conventional to sustainable building depends on a number of factors— technological, environmental, economic and social. From a computer-aided design perspective, the first two are perhaps the most significant. We are working on a project with an emphasis on developing tools, to evaluate environmental consequences for design decision-making. Our current thrust is given to reducing energy usage as well as carbon emissions in buildings.
keywords	Sustainable building rating system, Building information model
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia08_316
id	acadia08_316
authors	Greenberg, Evan
year	2008
title	Observation, Analysis, and Computation of Branching Patterns in Natural Systems
doi	https://doi.org/10.52842/conf.acadia.2008.316
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 316-323
summary	Branching occurs in natural systems for functional reasons. However, the branching logic for each specific system is quite different due to environmental and mathematical factors. In the computation of branching systems, these mathematical factors can be incorporated quite easily into the coding of each system. However, it is the environmental components that must be given further consideration in the simulation of these natural systems. Through the engine of genetic algorithms based on evolutionary developmental theory, the specific logics observed and analyzed in branching patterns of river systems, trees, and insect tracheae can be simulated and optimized in a digital environment.
keywords	Algorithm; Branching; Emergence; Genetic; Simulation
series	ACADIA
last changed	2022/06/07 07:51

_id	acadia08_174
id	acadia08_174
authors	Jaskiewicz, Tomasz
year	2008
title	‘iPortals’ as a Case Study Pre-Prototype of an Evolving Network of Interactive Spatial Components
doi	https://doi.org/10.52842/conf.acadia.2008.174
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 174-181
summary	The art and craft of design and creation of buildings is undergoing a radical paradigm shift. This shift is being driven by diverse novel cross-disciplinary technical possibilities, as well as by ongoing cultural transformations. They all, directly or indirectly, originate from omnipresent advancements in information technologies. Instant and ubiquitous availability of information and immediate access to computing power pervasively penetrating our lives is profoundly transforming our culture. This phenomenon has enormous implications for architecture in a multitude of ways1. ¶ Firstly, the speed of changes that occur in modern-day culture and society makes it inconvenient or even entirely impossible to design buildings with fixed and permanent functionalities. As lifestyle patterns, production methods and environmental conditions, to name a few factors only, may now dramatically change from one day to another, architecture has to become flexible. It has to allow dynamic, active, or even pro-active adaptation and customization of spaces on many levels of its functionality2. ¶ Secondly, these profound cultural changes are not only of technical relevance. In its process-driven character, information technology strongly mandates the already widely recognized ontology of becoming, proclaimed by the prominent minds of contemporary philosophy and science. This process-oriented worldview, supported by latest technological possibilities3, has caused a radical change in the common sense of the manner in which architecture has to be understood and dealt with4. As an effect, it requires an in-depth reconsideration of the nature of processes of both creation and participation in spatial environments.
keywords	Environment; Interactive; Open Systems; Prototype; Skin
series	ACADIA
last changed	2022/06/07 07:52

_id	ecaade2008_190
id	ecaade2008_190
authors	Russell, Peter; Elger, Dietrich
year	2008
title	The Meaning of BIM
doi	https://doi.org/10.52842/conf.ecaade.2008.531
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 531-536
summary	The paper is a position paper, not a report about a research project. It concerns the paradigm-shift that is taking place in the CAAD software and its implications for the business of architecture and more importantly, for the education of future members of the profession. Twenty years ago the use of CAAD software as a replacement for hand drafting was starting. Since then the transformation is complete: hardly a final project in the universities is drawn by hand. Currently, we are witnessing a second paradigm shift and its name is BIM. The meaning of BIM is rooted in two significant differences to current CAAD software and this will have implications for teaching and practicing architecture. The first difference is the way the software structures information in the CAAD file. The standard way to save CAAD information was to organise simple geometric objects according to membership in groups and to sort them according to a layer-metaphor, which primarily controlled the visibility of the geometric elements. Three-dimensional modelling is/was nothing more than the same structure with a more complex geometry. BIM software changes this structure by storing classes of geometries and then to store the specific values of individual geometries according to factors that can be determined by external or internal logical factors. The implication for architects is that we have the chance to be the people in control of the building information model, so long as we invest the time and energy to fully understand what is happening to the building information during the planning process. If we ignore this, the real danger exists that the last control of the building’s final configuration will be usurped. As educators we are currently teaching students that will be leaving the schools in 2012 and beyond. By then, the paradigm-shift will be in full motion and so it behoves us to consider which skill sets we want the next generation of architects to possess. This means not just teaching students about how to use particular BIM software or how to program a certain parametric/genetic algorithm in a form-finding process. We need to teach our students to take the leadership in building information management and that means understanding and controlling how the building information flows, how the methodologies that are used by the consulting engineers affect our building models, and knowing what kind of logical inconsistencies (internal or external) can threaten the design intention.
keywords	Building Information Modelling, Digital Curriculum, Architectural Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ddss2008-15
id	ddss2008-15
authors	Vreenegoor, Rona C.P.; B. de Vries and J.L.M. Hensen
year	2008
title	Comparing district designsScreening analysis of the critical factors at the building level
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	More and more urban designs show the appliance of low-energy techniques. Unfortunately, it is difficult to determine which one of these urban designs has the best results for energy consumption and CO2-emissions because of a lack of methods and techniques at district level. A new energy performance calculation method at district level including aspects like houses, transport and households is presented. In this paper we focus on the critical factors at the building level that should be included in a district data model. Therefore we have executed a screening analysis to indicate what the critical factors are.
keywords	Design support, energy performance simulation, district model, residents’ preferences
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-14
id	ddss2008-14
authors	Zekri, Elyes; Gérard Hégron and Alain Legendre
year	2008
title	Environmental Classification of Urban PedestrianWalkways
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This work is developed in the framework of urban design where we try to understand, to characterize then to qualify the environmental quality of urban open spaces along pedestrian walkways. So, we propose an analysis and a classification method applied to pedestrian walkways, taking into account their environmental characteristics. Analysis method is based on Discrete Wavelet Transform (DWT) in which we exploit the detailed version of the signal representing the evolution of a physical factor of environment along the walkway. This method leads to a segmentation of the signal. Then, a classification technique called Agglomerative Hierarchical Clustering (AHC) is performed to identify classes of walkways in terms of environmental features.
keywords	Pedestrian walkways, physical factors of environment, wavelet, classification
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-03
id	ddss2008-03
authors	Zhu, Wei and Harry Timmermans
year	2008
title	Incorporating Principles of Bounded Rationality intoModels of Pedestrian Shopping BehaviorTheory and Example
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	The modeling and simulation of pedestrian behavior has been dominantly relied on rational choice models in which pedestrians are assumed to be capable of processing a large number of choice alternatives and trade off attribute utilities. In reality, however, pedestrian behaivor shows the evidence of bounded rationality. They simplify the decision problem by considering a limited number of factors as well alternatives, using heuristics to arrive at satisfactory as opposed to optimal choices. Incorporating principles of bounded rationality in pedestrian modeling will benefit the understanding of individual decision processes and planning practice. This paper proposes an approach that models the cognitive processes such as filtering factors, constructing preference structures, deriving heterogeneous decision heuristics, and selecting decision strategies. The approach is also exemplified through estimating the model on pedestrian store patronage behavior data, collected in a shopping center in Shanghai, China. The results show the estimated probabilities of usage of decision strategies and the sequences of factor search. Compared with the conventional multinomial logit models, the results indicate the statistical advantages of the new approach.
keywords	Bounded rationality, decision heuristics, heterogeneity, pedestrian, store patronage decision
series	DDSS
last changed	2008/09/01 17:06

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	ijac20076304
id	ijac20076304
authors	Baltazar, Ana Paula; Kapp, Silke; Nascimento, Denise Morado; Goncalves, Rodrigo Marcandier; Lino, Sulamita Fonseca; Coelho, Mara Lidia Rodrigues; Olalquiaga, Amanda Alves; Gontijo, Felipe Jose; Silva, Joana Vieira Da; Magalhaes, Pedro Arthur Novaes
year	2008
title	Noncopyright And The Digital Interface To Support The Autonomous Production Of Dwellings
source	International Journal of Architectural Computing vol. 6 - no. 3, pp. 279-297
summary	This paper presents the discussions on intellectual property crucial for the research group MOM to develop the system IDA (digital interface for supporting autonomous production of dwellings). It first introduces IDA, its conceptual framework, its database and its interactive interface. Then, it examines the arguments for copyright, identifying them as myths or disguises of other intentions, usually based on perpetuating privileges. From that it discusses the way IDA approaches interaction as a means to break the usual logic of perpetuating privileges in digital systems. This leads to examining some anti-copyright movements concluding that they follow the same logic of register of the copyright. Thus, noncopyright seems to be the best means to protest against the current logic and for conveying information towards autonomy of users in their processes of production of space. It also points to an alternative use of computers in architecture as proposed in IDA, which is not based on representation but on interaction.
series	journal
last changed	2008/10/14 14:00

_id	acadia08_102
id	acadia08_102
authors	Beaman, Michael
year	2008
title	Bio-complexity: Instructing with Relational Generatives
doi	https://doi.org/10.52842/conf.acadia.2008.102
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 102-109
summary	This paper will discuss the use of complex systems in analyzing biological precedence of self-organizing, self-stabilizing and emergent phenomenon. The use of complex biological systems will be used to define relational models that avoid issues of scale. Scalability (the ability to traverse scales) will be presented as a relational construct through the use of scope, not scale. The analysis of biological formation and organization as a relational model defined by scope will be presented as a generative in forming design strategies and solutions and will be illustrated in four undergraduate-level architecture studio projects.
keywords	Complexity; Generative; Scripting; Self-Organization; Simulation
series	ACADIA
last changed	2022/06/07 07:54

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	cdc2008_065
id	cdc2008_065
authors	Celento, David and Del Harrow
year	2008
title	CeramiSKIN: Biophilic Topological Potentials for Microscopic and Macroscopic Data in Ceramic Cladding
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 65-76
summary	CeramiSKIN is an inter-disciplinary investigation examining recursive patterns found in organic matter. Through the use of digital capture and translation techniques, these biophilic systems may serve as topological generators for structural and ornamental consequences well-suited to mass-customizable ceramic cladding systems for architecture. Digital information is acquired through laser scanning and confocal electron microscopy, then deformed using particle physics engines and parametric transformations to create a range of effects promulgated through digital fabrication techniques. This inquiry is primarily concerned with two questions: Is it possible that natural systems may be digitally captured and translated into biophilic structural forms and/or ornamental effects that may foster beneficial responses in humans? / Since natural orders eschew rigid manifold geometries in favor of compound plastic shapes, is it possible to fabricate mass-customized, large-scale biophilic ceramic cladding from organic digital data?
keywords	Ceramic cladding systems, biophilia in architecture, digital design, digital fabrication, masscustomization
email
last changed	2009/01/07 08:05

For more results click below: