Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 481

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2008_41_session4b_335
id	caadria2008_41_session4b_335
authors	Biao, Li; Li Rong, Xue Kai, Liu Chang, Gao Qin
year	2008
title	A Generative Tool Base on Multi-Agent System: Algorithm of “HighFAR” and Its Computer Programming
doi	https://doi.org/10.52842/conf.caadria.2008.335
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 335-342
summary	Utilizing the principle of multi-agent system by computer programming, the paper presents achievement of an architectural generative design tool which implements intelligent architecture design with the focus of the layout in Asian high density “Floor Area Ratio” (FAR). Applying with the software, architects can get a high density FAR planning design in several minutes. From macroscopic position of building agents in geography to encode the agents by computer programming, the paper expounds the process of the generative tool and its mathematics algorithms.
keywords	Multi-agent system, FAR, genetic algorithm, generator
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	ecaade2008_192
id	ecaade2008_192
authors	Fioravanti, Antonio
year	2008
title	An e-Learning Environment to Enhance Quality in Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2008.829
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 829-836
summary	The research project is aimed at enhancing the overall quality of buildings through a suitable exercise of design collaboration, and a delocalized cross-disciplinary learning for university students in the faculties of Architecture and Engineering. The research defines methods, techniques and ICT programs to provide education in the culture and exercise of collaboration for future professionals and technicians who operate in the field of the design and construction of complex building systems.
keywords	Collaborative Design, e-learning, knowledge bases, ontologies, multi-agent system
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss2008-11
id	ddss2008-11
authors	Gohnai, Y.; A. Ohgai and K. Watanabe
year	2008
title	A simulation model development of firefightingactivity by community residents against coseismic firespread using multi-agent systemAs a support tool for community-based disaster preventionplanning
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper attempted to develop a simulation model of residents’ firefighting activity against coseismic fire spread using multi-agent system. The developed model was applied to a case study area. In the application, the simulations were carried out to the existing area and eleven cases of the assumption (virtual conditions) of the area where are implemented various non-physical and physical measures. As a result, the measures with only physical and haphazard multitude of measures did not show a remarked effect of disaster prevention performance. And, it is confirmed that the model can visually, dynamically and quantitatively output results. From these outputs, the possibility of contribution for enhancing residents’ awareness and drafting a plan of disaster prevention was confirmed. However, there are still some problems to be solved for the practical use of the model.
keywords	Community-based Planning for Disaster Prevention, Planning Support System, Fire Spread Simulation, Firefighting simulation, Multi-agent system, Cellular Automata
series	DDSS
last changed	2008/09/01 17:06

_id	ecaade2008_175
id	ecaade2008_175
authors	Jeong, Yongwook; Trento, Armando
year	2008
title	Interleaving Semantics: a Filter Mediated Communication Model to Support Collaboration in Multi-Disciplinary Design
doi	https://doi.org/10.52842/conf.ecaade.2008.643
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 643-652
summary	The purpose of collaboration is to integrate the separate knowledge possessed by the participants in the design process into one meaningful whole. Centralized data structures, showed that the AEC industry is so fragmented that the data-centric approach is not feasible, for technical and procedural reasons. The shared database, minimizing the complexity of translating different form of representation, quickly becomes too large and unwieldy to support the dynamic process of multi-disciplinary collaborative design. In this paper, we propose a distributed model that includes a mechanism to facilitate the participants’ intentions more effectively by incorporating semantics into their representations. We also present how the semantics would be authored and published through the mechanism so that a higher level of shared understanding among the participants would be achieved.
keywords	Multidisciplinary Collaboration, Semantic Network, Ontology, Artificial Agent
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss2008-43
id	ddss2008-43
authors	Katoshevski, Rachel; Theo Arentze and Harry Timmermans
year	2008
title	Simulating Urban Dynamics Using a Combination of CellularAutomata and Activity-Based Models
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	Cellular automata models of urban change have been criticised for their lack of behavioural theory and representation in simulating urban change. It has led to a plea for developing multi-agent models. As a first step into this direction, this paper discusses the formulation of a combination of a cellular automata representation for an initial configuration of land use. This is linked to an activity-based model of travel demand, which generates varying demand for facilities across space. Agents, representing facility providers respond to this demand in locating and resizing their facilities. The interplay between these components then results in urban dynamics. The model is illustrated using a hypothetical example of urban forms.
keywords	Cellular automata, Activity-Based Modelling, Urban dynamics
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-07
id	ddss2008-07
authors	Nijland, Linda; Theo Arentze and Harry Timmermans
year	2008
title	Multi-Day Activity Scheduling Reactions to FutureEvents in a Dynamic Agent-Based Model of Activity-Travel Behaviour
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	In the context of activity-based transport simulation models, multi-day activity planning is receiving increasing attention. The aim of this paper is to develop and illustrate an extension of a needs-based model of activity generation that takes into account possible influences of pre-planned activities and events. This paper describes the theory and shows the results of simulations of the extension. The simulation was done for six different activities and different parameter values. The results show that the model works well and the influences of the parameters are clear and seem logical.
keywords	Travel Demand, Activity-Based Modelling, Activity Generation, Activity Scheduling, Needs, Multi-Day Activity Planning
series	DDSS
last changed	2008/09/01 17:06

_id	ddss2008-46
id	ddss2008-46
authors	Sharma, Shrikant B. and Vincent Tabak
year	2008
title	Rapid Agent Based Simulation of People Flow forDesign of SpacesAnalysis, Design and Optimisation
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper presents a novel static-dynamic network based people flow simulation model applied to design optimisation of circulation spaces within buildings and urban areas. In the current state of art the majority of existing people flow simulation models are driven by analysis rather than design. This is fine for simpler, evacuation type scenarios where a single or a few analyses runs are sufficient to determine the evacuation time. For more complex scenarios such as crowd circulation with complex multi-directional flow, one is as interested in the sensitivity of various design and stochastic behavioural parameters, so the rapid modelling simulations together with design capability become important. This paper presents a simplified network based people flow model that enables rapid simulations and therefore iterative design optimization of circulation space. The work integrates the techniques of graph-theory based network analysis with an origin-destination matrix model of crowd flow, to provide a rapid, parametric model. The resulting model can be analysed in a static as well as dynamic state. In the static state, the model analyses space based on connectivity of nodes, superimposed with the origin-destination matrix of population to provide valuable information such as footfalls, density maps, as well as quasi-static parameters such as mean flow rates. In the dynamic state, the model allows time-dependent analysis of flow using a detailed agent based simulation that also incorporates dynamic route-choice modelling, agent behaviours and interaction, and stochastic variations. The paper presents the integrated modelling technique and its implementation into simulation software SMART Move.
keywords	People Flow, Pedestrian, Agent Based Simulation, Evacuation, Network, Optimisation
series	DDSS
last changed	2008/09/01 17:06

_id	cf2019_009
id	cf2019_009
authors	Veloso, Pedro; Jinmo Rhee and Ramesh Krishnamurti
year	2019
title	Multi-agent space planning: a literature review (2008-2017)
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 52-74
summary	In this paper we review the research on multi-agent space planning (MASP) during the period of 2008-2017. By MASP, we refer to space planning (SP) methods based on online mobile agents that map local perceptions to actions in the environment, generating spatial representation. We group two precedents and sixteen recent MASP prototypes into three categories: (1) agents as moving spatial units, (2) agents that occupy a space, and (3) agents that partition a space. In order to compare the prototypes, we identify the occurrence of features in terms of representation, objectives, and control procedures. Upon analysis of occurrences and correlations of features in the types, we present gaps and challenges for future MASP research. We point to the limits of current systems to solve spatial conflicts and to incorporate architectural knowledge. Finally, we suggest that behavioral learning offers a promising path for robust and autonomous MASP systems in the architectural domain.
keywords	Space planning; Agent-based modeling; Multi-agent systems; Generative systems
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2008_097
id	sigradi2008_097
authors	Nogueira de Carvalho, Ana Paula; Marcelo Tramontano, Marlon Rubio Longo
year	2008
title	D.O.S. Designers on Spot: Communication processes and Learning actions [Processos de Comunicação e Ações de Aprendizagem]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	D.O.S. Designers on Spot: Communication processes and Learning actions This paper introduces some concepts that have been studied at D.O.S. project as part of the learning and communication actions. These concepts are relevant to the project as they brought to the team some improvements about design experiences based on network communication, as well as some reflections done by designers and researchers in different parts of the world. The project proposed by our research group is part of growing demands for experiments able to explore the Advanced Internet for fast transferring large packages of content. The activities are divided in two different instances: one is called exploratory research and aims to identify enrichments that a collaborative practice would add to the design process and to the production of interactive prototypes as well. The other one is related to remote learning strategies. It aims at investigating new methods of collective design and prototyping of objects with integrated media, and the diffusion of these techniques and methods in classroom environments, as a teaching strategy. Following are three different aspects about design experiences. The first one, called communication processes, presents a panoramic view about different ways the participants of a remote design session can share information. It targets to point and to systematize design actions by exploring transversal characteristics among designers, teams and the resulting objects. In order to achieve it, we have to understand some relations between remote communication and design processes, which explore issues in the project phases of conception, production and interaction. This exploration is part of the search for a conceptual scope for the D.O.S. project development, with an emphasis on the communication specificities between remote designers and the design process. The second one, learning action processes, introduces some issues about academic teaching and learning of design through remote and collaborative media. The third one, Virtual Design Studio (VDS), is related to the previous and aims to present a specific kind of remote design sessions targeting to create strategies to use new communication and information technologies (ICT) on remote project instances. The teaching of Architecture and Design is, above all, multidisciplinary – this means that it is not limited to the knowledge of one field of activity but, by a wide range of subjects from different areas - including Computing. The introduction of ICT (Information and Communication Technologies) in the project process is commonly associated to the final stages, and not to the creation. The contribution of the digital environment is provided for the use of various software, which are not restricted to those responsible for graphical representation: programs responsible for the organization of data in tables, for example, enable monitoring developments with clarity. The multidisciplinary consideration supports new variables in the process of design, working quickly and accurately on the possibilities, which modifies the agency of decisions and management tasks.
keywords	Advanced internet, collaborative design, virtual design studio
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	sigradi2008_166
id	sigradi2008_166
authors	Papanikolaou, Dimitris
year	2008
title	Digital Fabrication Production System Theory: Towards an Integrated Environment for Design and Production of Assemblies
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	A Digital Fabrication Production System (DFPS) is a concept describing a set of processes, tools, and resources that will be able to produce an artifact according to a design, fast, cheap, and easy, independently of location. A DFPS project is a complex assembly of custom parts that is delivered by a network of fabrication and assembly processes. This network is called the value chain. The workflow concept of a DFPS is the following: begin design process with a custom geometric form; decompose it into constructible parts; send the part files for fabrication to various locations; transport all parts at the construction site at the right time; finally, assemble the final artifact. Conceptually it means that based on a well structured value chain we could build anything we want, at anyplace, at controllable cost and quality. The goals of a DFPS are the following: custom shapes, controllable lead time, controllable quality, controllable cost, easiness of fabrication, and easiness of assembly. Simply stated this means to build any form, anywhere, accurately, cheap, fast, and easy. Unfortunately, the reality with current Digital Fabrication (DF) projects is rather disappointing: They take more time than what was planned, they get more expensive than what was expected, they involve great risk and uncertainty, and finally they are too complex to plan, understand, and manage. Moreover, most of these problems are discovered during production when it is already late for correction. However, there is currently no systematic approach to evaluate difficulty of production of DF projects in Architecture. Most of current risk assessment methods are based on experience gathered from previous similar cases. But it is the premise of mass customization that projects can be radically different. Assembly incompatibilities are currently addressed by building physical mockups. But physical mockups cause a significant loss in both time and cost. All these problems suggest that an introduction of a DFPS for mass customization in architecture needs first an integrated theory of assembly and management control. Evaluating feasibility of a DF project has two main problems: first, how to evaluate assemblability of the design; second, how to evaluate performance of the value chain. Assemblability is a system’s structure problem, while performance is a system’s dynamics problem. Structure of systems has been studied in the field of Systems Engineering by Network Analysis methods such as the Design Structure Matrix (DSM) (Steward 1981), and the liaison graph (Whitney 2004), while dynamics of systems have been studied by System Dynamics (Forrester 1961). Can we define a formal method to evaluate the difficulty of production of an artifact if we know the artifact’s design and the production system’s structure? This paper formulates Attribute Process Methodology (APM); a method for assessing feasibility of a DFPS project that combines Network Analysis to evaluate assemblability of the design with System Dynamics to evaluate performance of the value chain.
keywords	Digital Fabrication, Production System, System Dynamics, Network Analysis, Assembly
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia08_370
id	acadia08_370
authors	Wallick, Karl
year	2008
title	Digital and Manual Joints
doi	https://doi.org/10.52842/conf.acadia.2008.370
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 370-375
summary	This paper considers the problem of detailing joints between manual and digital construction by tracking the provocations of KieranTimberlake’s SmartWrap research and the evolution of that knowledge into practical architectural instruments that can be deployed into more traditional construction projects. Over the past several years, KieranTimberlake Associates in Philadelphia has undertaken a path of research focusing on problems of contemporary construction systems and practices. One product of this research was a speculative wall system assembled for a museum exhibit. SmartWrap was to be a digitally prefabricated wall system with embedded technology. ¶ While they have yet to wrap a building with SmartWrap, KieranTimberlake have utilized a number of the construction principles and digital tools tested in the SmartWrap exhibit. One of the most important principles, prefabrication, was explored in a fast-track construction project at the Sidwell Friends School. The compressed schedule drove the design of an enclosure system which incorporated performative elements in similar categories to SmartWrap: insulation, an electrical system, view, daylighting, and a rainscreen. Besides being a prefabricated façade system, the rainscreen detailing became a formal system for organizing many other scales of the project including: site systems, thermal systems, daylighting systems, enclosure, and ornament. At a second project, a similar wood rainscreen strategy was used. However, at the Loblolly House the question of prefabrication and digital modeling was tested far more extensively: thermal systems were embedded into prefabricated floor cartridges, entire program elements – a library, kitchen, and bathroom were proposed as prefabricated systems of self-contained volume and infrastructure which were then inserted into the on-site framework. ; In all three projects the joint between manual-imprecise construction and digital-precise prefabrication became the area of richest invention (Figure 1). SmartWrap may not have yielded flexible, plastic architecture; but its conceptual and practical questions have yielded tangible implications for the design/construction processes and the built product in KieranTimberlake’s practice.
keywords	Construction; Design; Integrative; Prefabrication; Skin
series	ACADIA
last changed	2022/06/07 07:58

_id	acadia08_448
id	acadia08_448
authors	Alfaris, Anas; Riccardo Merello
year	2008
title	The Generative Multi-Performance Design System
doi	https://doi.org/10.52842/conf.acadia.2008.448
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 448-457
summary	This paper proposes a framework for an integrated computational design system. This design system builds on the strengths inherent in both generative synthesis models and multi-performance analysis and optimization. Four main design mechanisms and their mathematical models are discussed and their integration proposed. The process of building the design system begins by a top-down decomposition of a design concept. The different disciplines involved are decomposed into modules that simulate the respective design mechanisms. Subsequently through a bottom-up approach, the design modules are connected into a data flow network that includes clusters and subsystems. This network forms the Generative Multi-Performance Design System. This integrated system acts as a holistic structured functional unit that searches the design space for satisfactory solutions. The proposed design system is domain independent. Its potential will be demonstrated through a pilot project in which a multi-performance space planning problem is considered. The results are then discussed and analyzed.
keywords	Analysis; Behavior; Generative; Optimization; Performance
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2008_160
id	ecaade2008_160
authors	Aschwanden, Gideon; Halatsch, Jan; Schmitt , Gerhard
year	2008
title	Crowd Simulation for Urban Planning
doi	https://doi.org/10.52842/conf.ecaade.2008.493
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 493-500
summary	This paper presents a semi-automatic visualization method for the evaluation of urban environments that is based on artificial intelligence. It proposes the use of agent-based crowd simulation software on a mid-scale urban planning level for design evaluation. The information on agents’ movements is noted in standard raster images. The results are maps that are easy to understand. These maps show movement paths of the agents and density and give further conclusion on bottlenecks in planning contexts. Key measures, like the occupant movement in a given district, until now relied greatly on empirical knowledge or data that could be only gathered after an urban design had become built reality. Our method focuses on the adaptation of common software technology that is originally situated in film and TV productions. A practical workflow shows how our method can be easily integrated in daily design tasks.
keywords	Artificial intelligence, agent-based, crowd simulation, urban planning, design evaluation, occupant movement
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2008_103
id	sigradi2008_103
authors	Baltazar, Ana Paula; Maria Lucia Malard, Silke Kapp, Pedro Schultz
year	2008
title	From physical models to immersive collaborative environments: testing the best way for homeless people to visualise and negotiate spaces
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper describes an experiment to investigate the best way for lay people to use representation to visualise and negotiate space. It was motivated by our observations in workshops for digital inclusion in the context of a housing project for a homeless association. Computers were used to make it easier for the community to understand and change the spaces in real time. The first workshops proved that our approach was efficient as an exercise but not certainly effective concerning the understanding of spatial qualities. So we have designed an experiment to compare the usability of different media in participatory design processes. For that we have adapted the ‘Usability’ methodology, which is fully described in the paper. We started with three main questions. The first concerned the effectiveness of different media to represent spatial quality; the second concerned the best way for novices to approach space, whether by refurbishing a pre-existing space or by starting from the scratch; and the third concerned the effectiveness of negotiation by means of discourse and by means of or action. We also had two main hypothesis: one coming from research on digital environments and stereo visualisation, indicating that the more people feel immersed in the represented environment the more they are able to correlate it with physical space; and the other coming from our own observations in the participatory design workshops, in which the collective decision-making was manipulated by those people with more advanced communication skills who use their ability in an authoritative way regardless of the relevance of what they have to say. This paper describes the whole experiment, which was an exercise of spatial negotiation in 5 versions. In the first version we provided fixed digital views of a room in plan and axonometry; for another two versions we provided a physical model of the room in 1:10 scale, with some pieces of the existing furniture in different scales. This was done to check if people were just playing with a puzzle or actually grasping the correspondence between representation and the object or the space represented. One version proposes refurbishment and the other starts from the scratch. And the last two versions repeated the same task made with the physical model, but this time using a 3D interactive digital model. People were required not only to organise the furniture in the space but also to build a full scale cardboard structure and organise the real furniture reproducing their proposed model. Their comments on the spaces they had built confronted with what they had imaged when working with the model has enabled us to compare the different models, as also the different ways of negotiating spaces. This paper describes this experiment in detail concluding that 3D digital interactive models are far more effective than physical models and 2D drawings; when negotiation happens by means of action it provides more creative results than when the discoursive practice prevails; people are more creative when they start something from scratch, though they spend more time. The results of this experiment led us to formulate a new hypothesis leading to the development of an immersive collaborative environment using stereoscopy.
keywords	Visualisation, negotiation, immersive environment, digital interfaces, homeless people
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_186
id	ecaade2008_186
authors	Bourdakis, Vassilis
year	2008
title	Low Tech Approach to 3D Urban Modeling
doi	https://doi.org/10.52842/conf.ecaade.2008.959
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 959-964
summary	Over the last decade various examples of urban 3D models have been created employing various techniques for data collection and model building. The problems faced are well documented, issues of accuracy, complexity and utility of the models has also been addressed. This paper presents a low tech approach to accurate city modeling focusing on engineering applications, browsing/experiencing applications as well as multi-layering time based analyses, historical info overlaying for use in interactive real time applications (museum exhibitions, research projects for behavioral patterns of users in 3D urban environments, marketing, tourism, etc). The pros and cons of the proposed methodology are analyzed and ways forward suggested.
keywords	Urban modeling, photogrammetric techniques, 3D modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdc2008_129
id	cdc2008_129
authors	Breen, Jack and Julian Breen
year	2008
title	The Medium Is the Matter: Critical Observations and Strategic Perspectives at Half-time
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 129-136
summary	This paper critically re-views the professional impact and functionality of the pervasive digital ‘matter’ we have come to believe we can no longer do without. On the basis of a playful exploration of the first ‘half-century’ of our digital age, an attempt is made to draw new perspectives for the next ’level’ of our digital culture in a broader (multi)media perspective and more specifically: the domains of Architecture. To stimulate an open-minded ‘second-half’ debate, the paper puts forward some potentially promising (and hopefully provocative) conceptions and strategies for imaginative interface applications and game-based architectural study initiatives. Furthermore, the paper proposes the establishment of a new cultural platform for the exchange of Critical Digital hypotheses and the evolvement of visionary design concepts through creative digital innovation, with the (inter)active involvement of older and younger team-players…
email
last changed	2009/01/07 08:05

_id	ddss2008-36
id	ddss2008-36
authors	Burger, J.; R.P. de Graaf, and G.J. Helmerhorst
year	2008
title	Dynamic Actor Network Steering And ControlManaging Actor Networks In The Construction Process
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
keywords	Multi-actor, network planning, critical path, linear programming
series	DDSS
last changed	2008/09/01 17:06

For more results click below: