Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2008_180
id	sigradi2008_180
authors	Vincent, Charles
year	2008
title	Gulliver in the land of Generative Design
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The current trend in architectural design towards architectural computing has been treated both from a philosophical standing point and as an operational systems’ problem, in a quest for explications which could at last break ground for a more broad development and adoption of design tools. As Kostas Terzidis (2007) puts it, the intuitiveness that architects have put on so high a pedestal seems to be the central issue to be dealt with by both views. There seems to be no apparent shortcut toward the reconciliation between traditional practice and new media and most certainly it is not only a problem of interface design, but one of design method clarification and reinterpretation of those methods into computing systems. Furthermore, there’s no doubt left as to whether computing systems can generate such new patterns as to impact our own understanding of architecture. But even if computer algorithms can make possible the exploration of abstract alternatives to an abstract initial idea, as in Mathematica and Processing, the issue of relating abstract and geometric representations of human centered architecture lays in the hands of architects, programmers or, better yet, architect-programmers. What seems now to be the relevant change is that architectural design might escape from the traditional sequence embedded in the need – program – design iterations – solution timeline, substituted by a web of interactions among differing experimental paths, in which even the identification of needs is to be informed by computing. It is interesting to note that the computational approach to architectural design has been praised for the formal fluidity of bubbles and Bezier shapes it entails and for the overcoming of functionalist and serialization typical of modern architecture. That approach betrays a high degree of canonic fascination with the tools of the trade and very little connection to the day to day chores of building design. On the other hand, shall our new tools and toys open up new ways of thinking and designing our built landscape? What educational issues surface if we are to foster wider use of the existing technologies and simultaneously address the need to overtake mass construction? Is mass customization the answer for the dead end modern architecture has led us to? Can we let go the humanist approach begun in Renascence and culminated in Modernism or shall we review that approach in view of algorithmic architecture? Let us step back in time to 1726 when Swift’s ‘Travels into Several Remote Nations of the World by Lemuel Gulliver’ was first published. In Swift’s fierce critic of what seemed to him the most outrageous ideas, he conceived a strange machine devised to automatically write books and poetry, in much the same generative fashion that now, three centuries later, we begin to cherish. “Every one knew how laborious the usual method is of attaining to arts and sciences; whereas by his contrivance, the most ignorant person at a reasonable charge, and with a little bodily labour, may write books in philosophy, poetry, politicks, law, mathematics and theology, without the least assistance from genius or study. He then led me to the frame, about the sides whereof all his pupils stood in ranks. It was twenty foot square, placed in the middle of the room. The superficies was composed of several bits of wood, about the bigness of a dye, but some larger than others. They were all linked together by slender wires. These bits of wood were covered on every square with paper pasted on them; and, on these papers were written all the words of their language in their several moods, tenses, and declensions, but without any order. The professor then desired me to observe, for he was going to set his engine at work. The pupils at his command took each of them hold of an iron handle, whereof there were forty fixed round the edges of the frame; and giving them a sudden turn, the whole disposition of words was entirely changed. He then commanded six and thirty of the lads to read the several lines softly as they appeared upon the frame; and where they found three or four words together that might make part of a sentence, they dictated to the four remaining boys who were scribes. This work was repeated three or four times, and at every turn the engine was so contrived, that the words shifted into new places, as the square bits of wood moved upside down.” (Jonathan Swift, Gulliver’s Travels, A Voyage to Balnibarbi) What astonishing forecast did Swift show in that narrative that, in spite of the underlying incredulity and irony, still clarifies our surprise when faced to what might seem to some of us just an abandonment of all that architects and designers have cherished: creativeness and inventiveness. Yet, we could argue that such a radical shift in paradigm occurred once when master builders left the construction ground and took seat at drafting boards. The whole body of design and construction knowledge was split into what now seem to us just specialties undertaken by more and more isolated professionals. That shift entailed new forms of representation and prediction which now each and all architects take for granted. Also, Cartesian space representation turned out to be the main instrument for professional practice, even if one can argue that it is not more than the unfolding of stone carving techniques that master builders and guilds were so fond of. Enter computing and all its unfolding, i.e. DNA coding, fractal geometry, generative computing, nonlinear dynamics, pattern generation and cellular automata, as a whole new chapter in science, and compare that to conical perspective, descriptive and analytical geometry and calculus, and an image begins to form, delineating a separation between architect and digital designer. In previous works, we have tried approaching the issues regarding architects education in a more consensual way. But it seems now that the whole curricular corpus might be changed as well. The very foundations upon which we prepare future professionals shall change, not only in College, but in High School as well. In this paper, we delve further into the disconnect between current curricula and digital design practices and suggest new disciplinary grounds for a new architectural education.
keywords	Educational paradigm; Design teaching; Design methods;
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2023_253
id	sigradi2023_253
authors	Cavalcanti, Isabella, Teixeira Mendes, Leticia and Albuquerque, Fernando
year	2023
title	From Modeling to Collective Digital Fabrication: Experience of the "Banco Cabaça"
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 543–554
summary	This paper presents an experience of collective digital fabrication and parametric modeling of furniture made with recycled plastic waste, inspired by natural elements of the Brazilian northeast. In addition to conventional joinery techniques, we highlight the technologies of rapid prototyping (PR) and digital fabrication (FD) (Volpato, 2007, Pupo, 2008; Pupo, 2009); as tools that promote a paradigm shift, both in the design process and in production and materialization (Kolarevic, 2005), allowing recycled plastic to have new applications. We started with a brief review of digital fabrication processes in Brazil, emphasizing collaboration in design and execution. Then, we contain the recycling of plastic and the need for actions for its best destination. Finally, we present a sustainable and collaborative design experience: the modeling and digital fabrication of furniture, entirely produced from recycled plastic, called “Banco Cabaça”.
keywords	Sustainable Design, Digital fabrication, Collaborative process, Parametric modeling, Brazilian design.
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	sigradi2008_012
id	sigradi2008_012
authors	Dokonal, Wolfgang
year	2008
title	What is the state of digital architectural design?
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	What is the state of digital architectural design? The ubiquity of the computer in architecture can be seen in the many computer based presentations from famous architectural practices. BIM (Building Information Modelling) is the key word and we can see implementations in very ambitious projects all over the world. Glossy magazines show the results of this kind of architecture and predict that this is the future of our profession. But when we go out into the “small world” (in Europe) and talk with architects in small firms, there is a very different reality – at least at the moment. Although they all agree that the computer is crucial for their work, it is a love/hate relationship for many them. Most still use the computer purely as a drafting device and AutoCAD is still the dominant tool. Although many of them agree with the statement that you can use the computer for design, only a minority really use the computer as a design tool in the early design stages. To find out more about the reality of the use of computers in design in “small town Europe” we have been undertaking two different kinds of research over the past 4 years. The first one is an educational experiment using first year’s students to find out about the different qualities of designing with and without the computer. The results have been presented at previous conferences and, since we are doing a last run of these experiments this year, we will update and finalise our findings in this paper. To make it comparable to previous years, we use largely the same settings using the same type of student (first year) and the same project/site. We will also be comparing the results for students designing ‘freestyle’ ie in the way that they want against the previous years controlled groups. The second strand of research we have followed is a survey amongst practitioners and some of the above statements came out of this survey. We did this survey using a web questionnaire and focused on a particular region of Europe. Although the numbers of participants for this survey were quite satisfying we are re-running the survey in a different region and country to see whether there are significant differences. The results of our research and our experience as teachers and architects leads us to the main question of how we can give recommendations on how to teach design the new generation of architects. In many aspects most of the teaching that is done in our faculties is still strictly divided into teaching design and teaching computer skills. The crucial question for architectural education are the implications of the ubiquity of the computer will have especially in the field of design. We will try to give some suggestions for these effects this could have on our teaching. In the long run, this is the only way to avoid some of the pitfalls and bring the benefits of computers in design to our small architectural firms. The paper will present a summary of the results of our research and try to propose an answer to the question: “What is the state of digital design in small town Europe?”
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	acadia08_458
id	acadia08_458
authors	Hemsath, Timothy; Robert Williams; Ronald Bonnstetter; Leen-Kiat Soh
year	2008
title	Digital CADCAM Pedagogy Model: Intelligent Inquiry Education
doi	https://doi.org/10.52842/conf.acadia.2008.458
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 458-463
summary	Prototype manufacturing as an educational tool has been very successful at the college level in architecture and engineering design. This paper discusses an innovative inquiry-based learning approach rather than the problem-based learning models commonly utilized by other similar programs. For example, several research-funded technology projects (e.g., Cappelleri et al. 2007) look at involving students in problem-based learning exercises (e.g., building robots); however, these exercises (while providing valuable experiences) have predetermined outcomes ingrained by the teachers, the project structure, and the components used to construct the devices. Therefore, inquisitive and creative problem solving is limited to the “kit-of-parts” in their approach to solving the problem. The inquiry-based CADCAM pedagogy model is more concerned with the process of solving a problem through the vehicle of prototyping than with the specificity of the design project itself. This approach has great potential. First, the need to solve the problem drives learning on multiple levels, integrating interdisciplinary ideas into the problem and solution. Second, the problem interlocks disciplines through inquiry knowledge building in team exercises. Finally, it encourages diversity and flexibility by allowing students to look at problems from multiples perspectives and points of view.
keywords	CAD; Education; Evaluation; Pedagogy; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 07:49

_id	acadia08_174
id	acadia08_174
authors	Jaskiewicz, Tomasz
year	2008
title	‘iPortals’ as a Case Study Pre-Prototype of an Evolving Network of Interactive Spatial Components
doi	https://doi.org/10.52842/conf.acadia.2008.174
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 174-181
summary	The art and craft of design and creation of buildings is undergoing a radical paradigm shift. This shift is being driven by diverse novel cross-disciplinary technical possibilities, as well as by ongoing cultural transformations. They all, directly or indirectly, originate from omnipresent advancements in information technologies. Instant and ubiquitous availability of information and immediate access to computing power pervasively penetrating our lives is profoundly transforming our culture. This phenomenon has enormous implications for architecture in a multitude of ways1. ¶ Firstly, the speed of changes that occur in modern-day culture and society makes it inconvenient or even entirely impossible to design buildings with fixed and permanent functionalities. As lifestyle patterns, production methods and environmental conditions, to name a few factors only, may now dramatically change from one day to another, architecture has to become flexible. It has to allow dynamic, active, or even pro-active adaptation and customization of spaces on many levels of its functionality2. ¶ Secondly, these profound cultural changes are not only of technical relevance. In its process-driven character, information technology strongly mandates the already widely recognized ontology of becoming, proclaimed by the prominent minds of contemporary philosophy and science. This process-oriented worldview, supported by latest technological possibilities3, has caused a radical change in the common sense of the manner in which architecture has to be understood and dealt with4. As an effect, it requires an in-depth reconsideration of the nature of processes of both creation and participation in spatial environments.
keywords	Environment; Interactive; Open Systems; Prototype; Skin
series	ACADIA
last changed	2022/06/07 07:52

_id	sigradi2008_078
id	sigradi2008_078
authors	Lobos, Danny; Dirk Donath
year	2008
title	Top down and bottom up – using BIM to merge these two design strategies.
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Our current research is focused on the optimization and evaluation of the architectural building design (gestalt), related and in balance to the inner organization of a building, the floorplan layout. This paper is focused on the impact of Space Layout Planning supported by Information and Communication Technologies (ICT) applied to Architectural Design. We present an overview and wide description of the „architectural design“, the classical definition and methods; and its evolution in practice since the ICT tools impact of the last forty years. Definition such as space program, space relationships, space function are wide discussed to understand the phenomena of architectural layout design, the parameters, variables, constraints and goals of each design. Second we present the state of the art and the current techniques and approaches (optimization, generative systems, artificial intelligence, genetic algorithms, physically based modeling, etc), a classification structure is generated to visualize the areas of impact and use of each technique (different areas from architectural design). Finally we described a complete framework to research and develop our own methodologies based on a specific case of architectural design, the current CAD tools and the possible develop of new tools using the impact of BIM systems.
keywords	space layout planning, computer aided design, functional planning, architectural floor layout, design methodologies, simulation and evaluation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2008_010
id	ecaade2008_010
authors	R. Lyon , Eduardo
year	2008
title	CAD and CAM Systems Integration:
doi	https://doi.org/10.52842/conf.ecaade.2008.837
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 837-844
summary	CAM systems traduce design information from CAD systems in to different manufacturing routines in order to produce NC code for CNC machinery. The output from the CAM software is usually a simple text file of G and M code, usually containing thousand of lines of code. Later this code is transferred to a machine tool using a direct numerical control (DNC) program. This translation process becomes extremely important in developing a digital design and fabrication approach. Consequently the aim in this research is; to investigate CAD-CAM workflow; to analyze final product deviation from design intent; and to determine where in the workflow, and how design strategies and design decisions correlates to manufacturing results.
keywords	Design Computing, CAD and CAM integration, Digital fabrication
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia08_478
id	acadia08_478
authors	Yan, Wie
year	2008
title	Environment-Behavior Simulation: From CAD to BIM and Beyond
doi	https://doi.org/10.52842/conf.acadia.2008.478
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 478-485
summary	This paper describes our research on environment-behavior simulation and focuses on the modeling of built environments using Computer-Aided Design (CAD) and Building Information Modeling (BIM). Our environment-behavior simulation addresses the problem of predicting and evaluating the impacts of built environments on their human inhabitants. We present simulation systems comprising an agent-based virtual user model and building models created with CAD and BIM tools. We compare the use of CAD vs. BIM with two case studies for environment-behavior simulation, and describe the essential parts of modeling buildings for the simulation, including geometry modeling—how the building components are shaped, semantic modeling—what the building components are, and pattern modeling—how the building components are used by users. We conclude that a new extensible and pattern-embedded BIM system will be necessary to facilitate environment-behavior simulation.
keywords	Behavior; BIM; Environment; Information; Simulation
series	ACADIA
last changed	2022/06/07 07:57

_id	cf2011_p035
id	cf2011_p035
authors	Langenhan, Christoph; Weber Markus, Petzold Frank, Liwicki Marcus, Dengel Andreas
year	2011
title	Sketch-based Methods for Researching Building Layouts through the Semantic Fingerprint of Architecture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 85-102.
summary	The paper focuses on the early stages of the design process where the architect needs assistance in finding reference projects and describes different aspects of a concept for retrieving previous design solutions with similar layout characteristics. Such references are typically used to see how others have solved a similar architectural problem or simply for inspiration. Current electronic search methods use textual information rather than graphical information. The configuration of space and the relations between rooms are hard to represent using keywords, in fact transforming these spatial configurations into verbally expressed typologies tends to result in unclear and often imprecise descriptions of architecture. Nowadays, modern IT-technologies lead to fundamental changes during the process of designing buildings. Digital representations of architecture require suitable approaches to the storage, indexing and management of information as well as adequate retrieval methods. Traditionally planning information is represented in the form of floor plans, elevations, sections and textual descriptions. State of the art digital representations include renderings, computer aided design (CAD) and semantic information like Building Information Modelling (BIM) including 2D and 3D file formats such as Industry Foundation Classes (IFC) (IAI, 2010). In the paper, we examine the development of IT-technologies in the area of case-based reasoning (Richter et al., 2007) to provide a sketch-based submission and retrieval system for publishing and researching building layouts including their manipulation and subsequent use. The user interface focuses on specifying space and their relations by drawing them. This query style supports the spatial thinking approach that architects use, who often have a visual representation in mind without being able to provide an accurate description of the spatial configuration. The semantic fingerprint proposed by (Langenhan, 2008) is a description and query language for creating an index of floor plans to store meta-data about architecture, which can be used as signature for retrieving reference projects. The functional spaces, such as living room or kitchen and the relation among on another, are used to create a fingerprint. Furthermore, we propose a visual sketch-based interface (Weber et al., 2010) based on the Touch&Write paradigm (Liwicki et al., 2010) for the submission and the retrieval phase. During the submission process the architect is sketching the space-boundaries, space relations and functional coherence's. Using state of the art document analysis techniques, the architects are supported offering an automatic detection of room boundaries and their physical relations. During the retrieval the application will interpret the sketches of the architect and find reference projects based on a similarity based search utilizing the semantic fingerprint. By recommending reference projects, architects will be able to reuse collective experience which match the current requirements. The way of performing a search using a sketch as a query is a new way of thinking and working. The retrieval of 3D models based on a sketched shape are already realized in several domains. We already propose a step further, using the semantics of a spatial configuration. Observing the design process of buildings reveals that the initial design phase serves as the foundation for the quality of the later outcome. The sketch-based approach to access valuable information using the semantic fingerprint enables the user to digitally capture knowledge about architecture, to recover and reuse it in common-sense. Furthermore, automatically analysed fingerprints can put forward both commonly used as well as best practice projects. It will be possible to rate architecture according to the fingerprint of a building.
keywords	new media, case-based reasoning, ontology, semantic building design, sketch-based, knowledge management
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2008_190
id	ecaade2008_190
authors	Russell, Peter; Elger, Dietrich
year	2008
title	The Meaning of BIM
doi	https://doi.org/10.52842/conf.ecaade.2008.531
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 531-536
summary	The paper is a position paper, not a report about a research project. It concerns the paradigm-shift that is taking place in the CAAD software and its implications for the business of architecture and more importantly, for the education of future members of the profession. Twenty years ago the use of CAAD software as a replacement for hand drafting was starting. Since then the transformation is complete: hardly a final project in the universities is drawn by hand. Currently, we are witnessing a second paradigm shift and its name is BIM. The meaning of BIM is rooted in two significant differences to current CAAD software and this will have implications for teaching and practicing architecture. The first difference is the way the software structures information in the CAAD file. The standard way to save CAAD information was to organise simple geometric objects according to membership in groups and to sort them according to a layer-metaphor, which primarily controlled the visibility of the geometric elements. Three-dimensional modelling is/was nothing more than the same structure with a more complex geometry. BIM software changes this structure by storing classes of geometries and then to store the specific values of individual geometries according to factors that can be determined by external or internal logical factors. The implication for architects is that we have the chance to be the people in control of the building information model, so long as we invest the time and energy to fully understand what is happening to the building information during the planning process. If we ignore this, the real danger exists that the last control of the building’s final configuration will be usurped. As educators we are currently teaching students that will be leaving the schools in 2012 and beyond. By then, the paradigm-shift will be in full motion and so it behoves us to consider which skill sets we want the next generation of architects to possess. This means not just teaching students about how to use particular BIM software or how to program a certain parametric/genetic algorithm in a form-finding process. We need to teach our students to take the leadership in building information management and that means understanding and controlling how the building information flows, how the methodologies that are used by the consulting engineers affect our building models, and knowing what kind of logical inconsistencies (internal or external) can threaten the design intention.
keywords	Building Information Modelling, Digital Curriculum, Architectural Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	sigradi2008_103
id	sigradi2008_103
authors	Baltazar, Ana Paula; Maria Lucia Malard, Silke Kapp, Pedro Schultz
year	2008
title	From physical models to immersive collaborative environments: testing the best way for homeless people to visualise and negotiate spaces
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper describes an experiment to investigate the best way for lay people to use representation to visualise and negotiate space. It was motivated by our observations in workshops for digital inclusion in the context of a housing project for a homeless association. Computers were used to make it easier for the community to understand and change the spaces in real time. The first workshops proved that our approach was efficient as an exercise but not certainly effective concerning the understanding of spatial qualities. So we have designed an experiment to compare the usability of different media in participatory design processes. For that we have adapted the ‘Usability’ methodology, which is fully described in the paper. We started with three main questions. The first concerned the effectiveness of different media to represent spatial quality; the second concerned the best way for novices to approach space, whether by refurbishing a pre-existing space or by starting from the scratch; and the third concerned the effectiveness of negotiation by means of discourse and by means of or action. We also had two main hypothesis: one coming from research on digital environments and stereo visualisation, indicating that the more people feel immersed in the represented environment the more they are able to correlate it with physical space; and the other coming from our own observations in the participatory design workshops, in which the collective decision-making was manipulated by those people with more advanced communication skills who use their ability in an authoritative way regardless of the relevance of what they have to say. This paper describes the whole experiment, which was an exercise of spatial negotiation in 5 versions. In the first version we provided fixed digital views of a room in plan and axonometry; for another two versions we provided a physical model of the room in 1:10 scale, with some pieces of the existing furniture in different scales. This was done to check if people were just playing with a puzzle or actually grasping the correspondence between representation and the object or the space represented. One version proposes refurbishment and the other starts from the scratch. And the last two versions repeated the same task made with the physical model, but this time using a 3D interactive digital model. People were required not only to organise the furniture in the space but also to build a full scale cardboard structure and organise the real furniture reproducing their proposed model. Their comments on the spaces they had built confronted with what they had imaged when working with the model has enabled us to compare the different models, as also the different ways of negotiating spaces. This paper describes this experiment in detail concluding that 3D digital interactive models are far more effective than physical models and 2D drawings; when negotiation happens by means of action it provides more creative results than when the discoursive practice prevails; people are more creative when they start something from scratch, though they spend more time. The results of this experiment led us to formulate a new hypothesis leading to the development of an immersive collaborative environment using stereoscopy.
keywords	Visualisation, negotiation, immersive environment, digital interfaces, homeless people
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_151
id	ecaade2008_151
authors	Barelkowski, Robert
year	2008
title	Web-based Support for Social Participation and Education in Planning Procedures
doi	https://doi.org/10.52842/conf.ecaade.2008.823
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 823-828
summary	The paper is intended to present the methodological structure of web-based mechanisms related to planning procedures, with particular focus on social participation. The tools provide a link between planners and local community members, allow the acquisition of different sets of data, provide detailed information on the environment and planned transformations, serve as a source of detailed information on the procedure, and last but not least play an educational role, which contributes greatly to the understanding of sustainability, cultural sensitivity, environmental issues, planning concerns on a wider scale. Web-related technology provides many opportunities to reach for a wider social participation and simultaneously to receive more representative feedback from the local community. The article will discuss in detail some results of the implementation of the Citizen project – a web-based platform supporting the social participation.
keywords	Spatial planning, social participation, web-based tools, web-based participation, Citizen project
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia11_242
id	acadia11_242
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2011
title	Parametric Robot Control: Integrated CAD/CAM for Architectural Design
doi	https://doi.org/10.52842/conf.acadia.2011.242
source	ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 242-251
summary	Robots are gaining popularity in architecture. Snøhetta has recently purchased their own industrial robot, becoming one of the first architectural offices to adopt robot technology. As more and more architects are exposed to robotic fabrication, the need for easy interoperability, integration into architectural design tools and general accessibility will increase. Architects are discovering that industrial robots are much more than kinematic machines for stacking bricks, welding or milling - they are highly multifunctional and can be used for a huge variety of tasks. However, industry standard software does not provide easy solutions for allowing direct robot control right from CAAD (Computer Aided Architectural Design) systems. In this paper we will discuss existing methods of programming industrial robots, published architectural results (Gramazio and Kohler 2008) and the design of a new user interface that allows intuitive control of parametric designs and customized robotic mass production, by integrating CAM (Computer Aided Manufacturing) functions into CAAD.
keywords	robot programming; parametric design; mass customization; grasshopper component design; fabrication; robot milling; digital architecture
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2008_005
id	ecaade2008_005
authors	Breen, Jack; Stellingwerff, Martijn
year	2008
title	Capital A to Z
doi	https://doi.org/10.52842/conf.ecaade.2008.759
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 759-766
summary	Throughout the history of architecture, the Capital – the intermediate between a column and the beam or surface it supports – has been a recurring feature in architectural composition and articulation. In this paper we describe results and findings from the Capital A to Z exercise within the Ornamatics Course from the TU-Delft MSc curriculum. We will show how this exercise combines various digital and physical processes for form finding and how further insights can come from the actual production of models and prototypes. Conclusions will be drawn regarding the integrated educational setup and regarding the influence of different methods and tools on the design process and the design results.
keywords	Computer aided manufacturing and modelling, composition, prototyping, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2008_077
id	sigradi2008_077
authors	Briones, Carolina
year	2008
title	A collaborative project experience in an architectural framework, working with Open Source applications and physical computing [Diseño de Plataformas Digitales e Interactivas: una experiencia educativa trabajando colaborativamente con aplicaciones de Código Abierto y Computación Física]
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	Nowadays, thanks to the telecommunication revolution and therefore the massive spread of Internet, we have seen the come up of international architectural offices with branches located in different continent, working in a collaborative fashion, surpassing physical and time frontiers. At the same time, the multidisciplinary work between designers, architects, engineers, programmers and even biologist, between others, have been taking place in the new network society. All transformations also supported by the arising of FOSS (Free Open Source Software) and the virtual communities behind them, which allow the creation of non-traditional or specific software, the association between disciplines, and also, the formation of meeting scenarios for a mixture of individuals coming up with multiple motivation to coexist in collaborative environment. Furthermore, it is possible to argue that Open Source applications are also the reflection of a social movement, based on the open creation and exchange of information and knowledge. Do the appeared of FOSS compel us to re-think our working and teaching methods? Do they allow new modes of organizing and collaborating inside our architectural practices?. This paper would like to address these questions, by presenting the results of the “Experience Design” course, which by implementing teaching methods based on Open Source principles and cutting-edge tools, seeks to approach students to these new “way of do”, knowledge and methodologies, and overall, focus them on the science behind the computer. This paper describes the “Experience Design” course, in which architectural graduate students of Universidad Diego Portales (Chile), put for first time their hands on the creation of interactive interfaces. By acquiring basic knowledge of programming and physical computing, students built in a collaborative way a responsive physical installation. The course use as applications “Processing” and “Arduino”. The first one is an Open Source programming language and environment for users who want to program images, animation, and interactions. It has a visual context and serve as a software sketchbook and professional production tool. Processing is a project initiated by Ben Fry and Casey Reas, at the MIT Media Lab (www.processing.org). The second is an Open Source electronics prototyping platform based on flexible, easy-to-use hardware and software. Arduino has a microcontroller (programmed with Processing language) which can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators (www.arduino.cc). Both environments shared a growing community of people working in related projects and extending useful assistance for beginners. In this paper it is presented the current state of the pilot course and some of the initials results collected during the process. Students and teacher’s debates and evaluations of the experience have been exposed. Together with a critical evaluation in relation to the accomplishment of the effort of place together different disciplines in one collaborative project akin, architecture, design, programming and electronic. Finally, futures modifications of the course are discussed, together with consideration to take in account at the moment of bring Open Source and programming culture into the student curriculum.
keywords	Physical computing, teaching framework, Open Source, Interactive Installation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	6953
id	6953
authors	Derix C, Miranda P and Gamlesaeter A
year	2008
title	Design Support Systems for Sustainable Development in the Thames Gateway area of London: “Smart Solutions for Spatial Planning “(SSSP)
source	Design Computation Cognition conference 2008
summary	This presentation will describe the methods and approaches used to develop applications for Urban Planners for use in masterplanning and scenario building. It was developed using a grant from the Higher Educational Council for England, and the Department for Trade and Industry as part of the “Building Sustainable Communities“ project.
keywords	urban planning, sustainability, masterplanning, computational design
series	other
type	workshop
email
more	http://www.springer.com/computer/information+systems+and+applications/book/978-1-4020-8727-1
last changed	2012/09/17 21:20

_id	732b
id	732b
authors	Dimitris Papanikolaou
year	2008
title	From Representation of States to Description of Processes
source	Proceedings of 1st International Conference: Critical Digital, Cambridge, MA: Harvard University, 2008: 311-318
summary	Introduction of digital technologies in architecture has generated a great amount of hesitation and criticism about the role of design and its relation to the artifact. This confusion seems to stem from the dual nature of design as representation of the form and as a description of its production process. Today architects urge to adopt digital tools to explore complex forms often without understanding the complexity of the underlying production techniques. As a consequence, architects have been accused of making designs that they do not know how to build. Why is this happening today? It seems that while technology has progressed, the design strategy has remained the same. This paper will deal with the following question: What matters in design? The paper will reveal fundamental problems, attempt to answer this question, and suggest new directions for design strategies today. The conclusion of this paper is that digital design should also aim to describe process of production rather than solely represent form.
keywords	Description, Artifact, Digital, Process, Assembly, Value Chain
series	other
type	normal paper
email
last changed	2008/06/16 21:08

For more results click below: