Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 93

Reformat results as: short short into frame detailed detailed into frame

_id	acadia08_382
id	acadia08_382
authors	Peters, Brady; Xavier De Kestelier
year	2008
title	Rapid Prototyping and Rapid Manufacturing at Foster + Partners
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 382-389
doi	https://doi.org/10.52842/conf.acadia.2008.382
summary	Over the last 15 years, rapid prototyping has been an integral part of the design process in the car and aerospace industry (Brad Fox 2006). Recently the architecture profession has started to use these techniques in its design process (Greg Corke 2006), and some architecture schools have begun experimenting with these technologies. ¶ Foster + Partners have been one of the first architecture practices to fully integrate rapid prototyping within its design process. The technology was initially seen as a sketch model making tool in the early stages of the design, in particular for projects with complicated geometries. It surpassed this purpose within a year and it is now seen an essential design tool for many projects and in for many project stages. The office’s rapid prototyping department now produces about 3500 models a year. ¶ Besides, or perhaps because of, rapid prototyping, Foster + Partners have started to experiment with rapid manufacturing. This first was done through the design and manufacture of a Christmas tree for the charity organisation Save the Children.
keywords	Complex Geometry; Design; Generative; Process; Rapid Prototyping
series	ACADIA
last changed	2022/06/07 08:00

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	caadria2008_27_session3b_221
id	caadria2008_27_session3b_221
authors	Al-Haddad, Tristan
year	2008
title	Parametric modulations in Masonry
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 221-228
doi	https://doi.org/10.52842/conf.caadria.2008.221
summary	The focus of the research presented in this paper asks how a designer can create a flexible system of physical making which can accommodate multiple programmatic functions within a smooth whole, rather than creating an a priori singular formal object. This adaptable system of construction works through the development of an intelligent CAD model that can be mapped to a flexible manufacturing mechanism, i.e. a reconfigurable mold. This system of manufacturing can be used to cast totally unique solid modules without creating a unique mold for each part by manipulating the topological structure of the system. This approach takes the notion of mass-customization beyond the expensive and unsustainable one-offs that the design world has seen recently, and into a new paradigm of a sustainable, economically viable world of mass-customizable form and space.
keywords	Parametrics, Variability, Reconfigurability, UHPC, Topology, Molding, Casting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2008_3_session1a_029
id	caadria2008_3_session1a_029
authors	Ambrose, Michael A., Carl Lostritto, Luc Wilson
year	2008
title	Animate education Early Design Education Pedagogy
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 29-35
doi	https://doi.org/10.52842/conf.caadria.2008.029
summary	This paper presents a novel approach to the introduction and use of animation and motion graphics in foundation design education. Design inquiry and understanding as generated from, and translated by, movement is the focus. This work explores animation as a design methodology in the first weeks of architectural education. The proposed design exercise discussed here will probe the concept/context and spatial/visual literacy of the learned sense of space-time in architectural design education and representation. Here the digital application of animation and motion graphics is intended to be process driven to encourage students to find an attitude about solutions rather than a solution to the design project. The intention is to examine the relationship between form and space through a structured exploration of movement within a kit-of-parts design project that explores a three-dimensional spatial construct. Animation as a design method poses unique potentials and pitfalls. Animation and motion graphics, as a collection of instances, is both questioned and exaggerated. This project creates a threshold experience of learning that puts in motion an exploration of integrated digital process and design product.
keywords	Education, design theory, design studies, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2008_53_session5b_437
id	caadria2008_53_session5b_437
authors	Ambrose, Michael A.; Lisa Lacharité
year	2008
title	Representation and re-Presentation: Emerging Digital Conventions of Architectural Communication
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 437-444
doi	https://doi.org/10.52842/conf.caadria.2008.437
summary	This paper examines the theoretical and conceptual underpinnings of digital architectural representation. Emerging digital tools, processes, and methods are sponsoring new conventions for the communication of architectural ideas and motives. New conventions yielded through digital media offer fresh and currently uncodified ways to communicate. These new conventions attempt to communicate the same ideas as the old, sometimes subverting the imperative for drawing as the representation does not refer to information in the abstract, but literally is the information. This research explores the use of architectural conventions, such as plan, section, and perspective, to examine re-presentation—not only a way to convey form and content, but to also to be used as a form of communication. The emerging digital conventions are forms of communication situated between representation and re-presentation.
keywords	Education, design theory, digital design representation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2008_153
id	ecaade2008_153
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 267-274
doi	https://doi.org/10.52842/conf.ecaade.2008.267
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. It observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. It discusses then, the confluence of architecture, information and communication technologies. The architecture has historically mediated the way people interact, but this interaction now has been greatly changed by new technologies. Then, it analyses the hypothesis that the experiments with new media art can bring the field of architecture closer to information and communication technologies. An educational experience is presented, aiming to verify some points discussed on the text. Concluding with an exposition of the potentialities of some hybrid art modalities in qualifying architectural practices.
keywords	Architecture, Information and Communication Technologies, Digital Art, Site Specific Art, Architectural Learning
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2008_025
id	ecaade2008_025
authors	Asanowicz, Aleksander
year	2008
title	How to Find an Idea? - Computer Aided Creativity
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 735-742
doi	https://doi.org/10.52842/conf.ecaade.2008.735
summary	In this paper the possibilities of using computer software in creative searching of design ideas is analysed. At the basis of such psychological theories as Incubation, Synectics, Geneplore, Bisociation, Conceptual Blending, Visual Synectics the implementation of digital technologies in the idea searching – the main stage of design process – is presented. In all computer ‘metaphorisation’ methods presented in this paper pictures are treated as idea triggers. Designer generate the ideas of the form by use the pictures as triggers for free association or for metaphorisation. The two cases of implementation of these methods, which based on graphic transformations, will be presented.
keywords	Creativity, design methods, form searching
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2008_040
id	ecaade2008_040
authors	Baerlecken, Daniel; Kobiella, Olaf
year	2008
title	Math Objects
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 677-684
doi	https://doi.org/10.52842/conf.ecaade.2008.677
summary	The paper discusses mathematical form generation as an academic methodology to develop new approaches to architectural design. The academic design studio ‘Math objects’ investigates the relationship between complex 3d-surfaces and mathematics in order to expand the formal repertoire of architecture. It claims that the process of form generation can be seen as an autonomous entity, which is independent from an overall strategy or any a priori meaning. Architecture has always originated from a concept, eventually progressing towards a certain form. This methodology has been reversed. The paper discusses two studios undertaken in the last year, led by Daniel Baerlecken and Olaf Kobiella at the TU Braunschweig, Germany.
keywords	Generative design, design methodology: architectural design teaching, parametric form generation, NURBS-modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	barchugova02_paper_eaea2007
id	barchugova02_paper_eaea2007
authors	Barchugova, Helena; Nataliya Rochegova
year	2008
title	Visualization and Animation in the Study of Ivan Leonidov's Creative Heritage
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	The investigation was made by the example of the park stairway in "Narkomtyazhprom" sanatorium in Kislovodsk. The results of this investigation are presented in the form of a film combining video materials of the real object with animated images that demonstrate methods of dynamic formation in design practice of Ivan Leonidov.
keywords	visualization, animation, design philosophy of Leonidov, dynamic form creation.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	ecaade2008_055
id	ecaade2008_055
authors	Beirão, José; Duarte, José; Stouffs, Rudi
year	2008
title	Structuring a Generative Model for Urban Design: Linking GIS to Shape Grammars
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 929-938
doi	https://doi.org/10.52842/conf.ecaade.2008.929
summary	Urban Design processes need to adopt flexible and adaptive procedures to respond to the evolving demands of the contemporary city. To support such dynamic processes, a specific design methodology and a supporting tool are needed. This design methodology considers the development of a design system rather than a single design solution. It is based on patterns and shape grammars. The idea is to link the descriptions of each pattern to specific shape rules inducing the generation of formal solutions that satisfy the pattern. The methodology explores, from the urban designer point of view, the capacity of a shape grammar to codify and generate urban form (Duarte et al, 2007). This paper defines the ontology of urban entities to build on a GIS platform the topology describing the various components of the city structure. By choosing different sets of patterns the designer defines his vision for a specific context. The patterns are explicated into shape rules that encode the designer’s interpretation of the pattern, and operate on this ontology of urban entities generating solutions that satisfy the pattern’s concept. Some examples of the topological relations are shown.
keywords	Patterns, shape grammars, ontology, generative urban design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia08_464
id	acadia08_464
authors	Belcher, Daniel; Brian Johnson
year	2008
title	MxR: A Physical Model-Based Mixed Reality Interface for Design Collaboration, Simulation, Visualization and Form Generation
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 464-471
doi	https://doi.org/10.52842/conf.acadia.2008.464
summary	MxR—pronounced “mixer”—is a Mixed/Augmented Reality system intended to support collaboration during early phases of architectural design. MxR allows an interdisciplinary group of practitioners and stakeholders to gather around a table, discuss and test different hypotheses, visualize results, simulate different physical systems, and generate simple forms. MxR is also a test-bed for collaborative interactions and demonstrates different configuration potentials, from exploration of individual alternatives to group discussion around a physical model. As a MR-VR transitional interface, MxR allows for movement along the reality-virtuality continuum, while employing a simple tangible user-interface and a MagicLens interaction technique.
keywords	Augmented Reality; Collaboration; Interactive; Interface; Physical Modeling
series	ACADIA
last changed	2022/06/07 07:54

_id	acadia08_152
id	acadia08_152
authors	Biloria, Nimish
year	2008
title	Morphogenomic Urban and Architectural Systems: An Investigation into Informatics Oriented Evolution of Form: The Case of the A2 Highway
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 152-157
doi	https://doi.org/10.52842/conf.acadia.2008.152
summary	This research paper exemplifies upon a novel information integrated generative design method: Morphogenomics, being experimented with at Hyperbody, TU Delft. Morphogenomics, a relatively new research area, which deals with the intricacies of morphological informatics. This paper furthermore discusses an ongoing Morphogenmoics oriented design-research case: the development of a Distributed Network-city along the A2 highway, Netherlands. The A2 highway, development is a live project seeking urban development on either side of this busy highway. Hyperbody, during the course of this research initiative developed a series of real-time interactive computational tools focusing upon the collaborative contextual generation of a performative urban and architectural morphology for the A2 highway. This research paper elaborates upon these computational techniques based Morphogenomic approach and its resultant outcomes.
keywords	Computation; Evolution; Flocking; Information; Morphogenesis
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2008_024
id	ecaade2008_024
authors	Boeykens, Stefan; Neuckermans, Herman
year	2008
title	Representational Limitations and Improvements in Building Information Modeling
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 35-42
doi	https://doi.org/10.52842/conf.ecaade.2008.035
summary	This paper discusses advantages and limitations of different representation types, illustrated with examples from current commercial Building Information Modeling applications. There is still a potential benefit in more thoroughly adapting additional representations to access and manage project data.The paper presents arguments to adapt a hybrid approach, where multiple representations should form a series of interfaces to interact with a building model. Inspiration is derived from software applications not associated with Building Information Modeling.
keywords	BIM, Representation, Design Software, Digital Building Model
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2008_005
id	ecaade2008_005
authors	Breen, Jack; Stellingwerff, Martijn
year	2008
title	Capital A to Z
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 759-766
doi	https://doi.org/10.52842/conf.ecaade.2008.759
summary	Throughout the history of architecture, the Capital – the intermediate between a column and the beam or surface it supports – has been a recurring feature in architectural composition and articulation. In this paper we describe results and findings from the Capital A to Z exercise within the Ornamatics Course from the TU-Delft MSc curriculum. We will show how this exercise combines various digital and physical processes for form finding and how further insights can come from the actual production of models and prototypes. Conclusions will be drawn regarding the integrated educational setup and regarding the influence of different methods and tools on the design process and the design results.
keywords	Computer aided manufacturing and modelling, composition, prototyping, ornamatics, education-based research
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdc2008_359
id	cdc2008_359
authors	Burke, Anthony
year	2008
title	Reframing “intelligence” in computational design environments
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 359-366
summary	This paper seeks to establish a set of principals that form an understanding of intelligent systems related to design and architecture, through a review of intelligence as it has been understood over the last 60 years since Alan Turing first asked the question “can machines think?”1 From this review, principals of intelligence can be identified within the neurophysiological and artificial intelligence (AI) communities that provide a foundation for understanding intelligence in computational architecture and design systems. Through critiquing these principals, it is possible to re-frame a productive general theory of intelligent systems that can be applied to specific design processes, while simultaneously distinguishing the goals of design oriented intelligent systems from those goals of general Artificial Intelligence research.
email
last changed	2009/01/07 08:05

_id	acadia08_118
id	acadia08_118
authors	Cabrinha, Mark
year	2008
title	Gridshell Tectonics: Material Values Digital Parameters
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 118-125
doi	https://doi.org/10.52842/conf.acadia.2008.118
summary	This paper begins with a simple proposition: rather than mimicking the geometric structures found in nature, perhaps the most effective modes of sustainable fabrication can be found through understanding the nature of materials themselves. Material becomes a design parameter through the constraints of fabrication tools, limitations of material size, and most importantly the productive capacity of material resistance—a given material’s capacity and tendencies to take shape, rather than cutting shape out of material. ¶ Gridshell structures provide an intriguing case study to pursue this proposition. Not only is there clear precedent in the form-finding experiments of Frei Otto and the Institute for Lightweight Structures, but also the very NURBS based tools of current design practices developed from the ability of wood to bend. Taking the bent wood spline quite literally, gridshells provide a means that is at once formally expressive, structurally optimized, materially efficient, and quite simply a delight to experience. The larger motivation of this work anticipates a parametric system linking the intrinsic material values of the gridshell tectonic with extrinsic criteria such as programmatic needs and environmental response. ¶ Through an applied case study of gridshells, the play between form and material is tested out through the author’s own experimentation with gridshells and the pedagogical results of two gridshell studios. The goal of this research is to establish a give-and-take relationship between top-down formal emphasis and a bottom-up material influence.
keywords	Digital Fabrication; Form-Finding; Material; Pedagogy; Structure
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2008_119
id	ecaade2008_119
authors	Celento, David; Harrow, Del
year	2008
title	CeramiSKIN
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 709-716
doi	https://doi.org/10.52842/conf.ecaade.2008.709
summary	ceramiSKIN is the result of an inter-disciplinary investigation between an architect and a ceramics artist. We are exploring natural orders as generators for aperiodic (non-repeating) tiling systems in architectural ceramic cladding systems. Of particular interest are the possibilities offered by digital imaging of organic materials [at various scales from 1:1 to 1:1 nanometer] as a means of form generation. After scanning, shapes are computationally deformed to create a range of biophilic effects promulgated through unique large scale ceramic cladding systems constructed using digital fabrication techniques.
keywords	Ceramic cladding systems: biophilia in architecture, digital design, digital fabrication, mass-customization
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: