Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 253

Reformat results as: short short into frame detailed detailed into frame

_id	acadia08_118
id	acadia08_118
authors	Cabrinha, Mark
year	2008
title	Gridshell Tectonics: Material Values Digital Parameters
doi	https://doi.org/10.52842/conf.acadia.2008.118
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 118-125
summary	This paper begins with a simple proposition: rather than mimicking the geometric structures found in nature, perhaps the most effective modes of sustainable fabrication can be found through understanding the nature of materials themselves. Material becomes a design parameter through the constraints of fabrication tools, limitations of material size, and most importantly the productive capacity of material resistance—a given material’s capacity and tendencies to take shape, rather than cutting shape out of material. ¶ Gridshell structures provide an intriguing case study to pursue this proposition. Not only is there clear precedent in the form-finding experiments of Frei Otto and the Institute for Lightweight Structures, but also the very NURBS based tools of current design practices developed from the ability of wood to bend. Taking the bent wood spline quite literally, gridshells provide a means that is at once formally expressive, structurally optimized, materially efficient, and quite simply a delight to experience. The larger motivation of this work anticipates a parametric system linking the intrinsic material values of the gridshell tectonic with extrinsic criteria such as programmatic needs and environmental response. ¶ Through an applied case study of gridshells, the play between form and material is tested out through the author’s own experimentation with gridshells and the pedagogical results of two gridshell studios. The goal of this research is to establish a give-and-take relationship between top-down formal emphasis and a bottom-up material influence.
keywords	Digital Fabrication; Form-Finding; Material; Pedagogy; Structure
series	ACADIA
last changed	2022/06/07 07:54

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	sigradi2008_175
id	sigradi2008_175
authors	Knight, Terry; Larry Sass, Kenfield Griffith, Ayodh Vasant Kamath
year	2008
title	Visual-Physical Grammars
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper introduces new visual-physical design grammars for the design and manufacture of building assembly systems that provide visually rich, culturally resonant design variations for housing. The building systems are intended to be tailored for particular cultures and communities by incorporating vernacular, decorative design into the assembly design. Two complementary areas of computational design research are brought together in this work: shape grammars and digital fabrication. The visual or graphic aspects of the research are explored through shape grammars. The physical design and manufacturing aspects are explored through advanced digital design and fabrication technologies and, in particular, build on recent work on mono-material assemblies with interlocking components that can be fabricated with CNC machines and assembled easily by hand on-site (Sass, 2007). This paper describes the initial, proof-of-concept stage of this work: the development of an automated, visual-physical grammar for an assembly system based on a vernacular language of Greek meander designs. A shape grammar for the two-dimensional Greek meander language (Knight, 1986) was translated into a three-dimensional assembly system. The components of the system are uniquely designed, concrete “meander bricks” (Figure 1). The components have integrated alignment features so that they can be easily fitted and locked together manually without binding materials. Components interlock horizontally to form courses, and courses interlock vertically in different ways to produce a visual variety of meander walls. The assembly components were prototyped at desktop scale with a layered manufacturing machine to test their appearance after assembly and their potential for design variations (Figure 2). Components were then evaluated as full-scale concrete objects for satisfaction of physical constraints related to concrete forming and component strength. The automated grammar (computer program) for this system generates assembly design variations with complete CAD/CAM data for fabrication of components formed from layered, CNC cut molds. Using the grammar, a full-scale mockup of a corner wall section was constructed to assess the structural, material, and aesthetic feasibility of the system, as well as ease of assembly. The results of this study demonstrate clearly the potentials for embedding visual properties in structural systems. They provide the foundations for further work on assembly systems for complete houses and other small-scale structures, and grammars to generate them. In the long-term, this research will lead to new solutions for economical, easily manufactured housing which is especially critical in developing countries and for post-disaster environments. These new housing solutions will not only provide shelter but will also support important cultural values through the integration of familiar visual design features. The use of inexpensive, portable digital design and fabrication technologies will allow local communities to be active, cooperative participants in the design and construction of their homes. Beyond the specific context of housing, visual-physical grammars have the potential to positively impact design and manufacture of designed artifacts at many scales, and in many domains, particularly for artifacts where visual aesthetics need to be considered jointly with physical or material requirements and design customization or variation is important.
keywords	Shape grammar, digital fabrication, building assembly, mass customization, housing
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ecaade2008_172
id	ecaade2008_172
authors	Pellitteri, Giuseppe; Concialdi, Salvatore; Lattuca, Raimondo; Conti, Giuseppe; De Amicis, Raffaele
year	2008
title	Digital Architectures Generated Using Forces in Urban Environment
doi	https://doi.org/10.52842/conf.ecaade.2008.951
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 951-958
summary	A paper, a description of a software application is given, which allows to generate tridimensional models of buildings, directly inside a geo referential context, following a parametric approach, in which the volume of the building is put in direct relation with forces/law bonds emerging from the urban context. The user is, therefore, able to interactively operate within a project process, in which, by changing the parameters values and by verifying in real time, the results of the changes, he/she is able to evaluate all possible infinite scenarios. The system, thought for Trento’s (Italy) urban context, may also be applied on other cities.
keywords	Generative design, performative architecture
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2008_115
id	ecaade2008_115
authors	Bernal, Marcelo; Yi-Luen Do, Ellen
year	2008
title	Variation from Repetition
doi	https://doi.org/10.52842/conf.ecaade.2008.791
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 791-798
summary	Making double curvature surfaces in architectural design is nontrivial and presents many challenges. Design and fabrication of these complex shapes requires systematic approaches. Most current design and fabrication processes distribute adaptable patterns over modulated variable surfaces. But to produce variation with this method means many machining hours and a budget that a conventional architectural project cannot afford. An alternative method to achieve such complex shapes would be to overlap identical elements on a grid. This paper presents an approach to fabricate such complex surfaces from the repetition of a series of identical elements.
keywords	Double curvature, adaptability: automation, digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss2008-02
id	ddss2008-02
authors	Gonçalves Barros, Ana Paula Borba; Valério Augusto Soares de Medeiros, Paulo Cesar Marques da Silva and Frederico de Holanda
year	2008
title	Road hierarchy and speed limits in Brasília/Brazil
source	H.J.P. Timmermans, B. de Vries (eds.) 2008, Design & Decision Support Systems in Architecture and Urban Planning, ISBN 978-90-6814-173-3, University of Technology Eindhoven, published on CD
summary	This paper aims at exploring the theory of the Social Logic of Space or Space Syntax as a strategy to define parameters of road hierarchy and, if this use is found possible, to establish maximum speeds allowed in the transportation system of Brasília, the capital city of Brazil. Space Syntax – a theory developed by Hillier and Hanson (1984) – incorporates the space topological relationships, considering the city shape and its influence in the distribution of movements within the space. The theory’s axiality method – used in this study – analyses the accessibility to the street network relationships, by means of the system’s integration, one of its explicative variables in terms of copresence, or potential co-existence between the through-passing movements of people and vehicles (Hillier, 1996). One of the most used concepts of Space Syntax in the integration, which represents the potential flow generation in the road axes and is the focus of this paper. It is believed there is a strong correlation between urban space-form configuration and the way flows and movements are distributed in the city, considering nodes articulations and the topological location of segments and streets in the grid (Holanda, 2002; Medeiros, 2006). For urban transportation studies, traffic-related problems are often investigated and simulated by assignment models – well-established in traffic studies. Space Syntax, on the other hand, is a tool with few applications in transport (Barros, 2006; Barros et al, 2007), an area where configurational models are considered to present inconsistencies when used in transportation (cf. Cybis et al, 1996). Although this is true in some cases, it should not be generalized. Therefore, in order to simulate and evaluate Space Syntax for the traffic approach, the city of Brasília was used as a case study. The reason for the choice was the fact the capital of Brazil is a masterpiece of modern urban design and presents a unique urban layout based on an axial grid system considering several express and arterial long roads, each one with 3 to 6 lanes,
keywords	Space syntax, road hierarchy
series	DDSS
last changed	2008/09/01 17:06

_id	caadria2008_51_session5a_417
id	caadria2008_51_session5a_417
authors	Schimek, Heimo; Milena Stavric, Albert Wiltsche
year	2008
title	The Intelligence of ornaments: Exploring ornamental ways of Affordable Non-Standard Building Envelopes
doi	https://doi.org/10.52842/conf.caadria.2008.417
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 417-425
summary	The purpose of this research is to explore ornamental patterns which can be used to enhance materials characteristics in low-cost building envelopes. We use standard building materials (sheets of cross-laminated timber) and develop a parametric design framework for the assembly. Existing rules of ornamental geometry are applied to a parametric controlled structural model so as to endow the building parts both with stability and aesthetics. The concepts of mass customization and “File to factory” support the digital fabrication of a non-repetitive pattern in façade construction and lead to reduced construction costs and building time.
keywords	Ornament, symmetry, parametric design, building shell, affordable non-standard architecture, mass customization
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	cdc2008_329
id	cdc2008_329
authors	Araya, Sergio
year	2008
title	Algorithmic Transparency
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 329-340
summary	This paper describes the procedures developed in the creation of an innovative technique to design and manufacture composite materials with transparency and translucency properties. The long term objective of this research is to develop a method to design and fabricate architectural elements. The immediate objective is to develop the methodology and procedural techniques to design and manufacture a composite material with controlled non homogeneous transparency properties. A secondary objective is to explore different levels of “embedded behavior” or responsiveness by using these techniques to combine different physical material properties on new designed “smarter” and “responsive” composite materials.
email
last changed	2009/01/07 08:05

_id	acadia08_364
id	acadia08_364
authors	Bonwetsch, Tobias; Ralph Baertschi ;Silvan Oesterle
year	2008
title	Adding Performance Criteria to Digital Fabrication: Room-Acoustical Information of Diffuse Respondent Panels
doi	https://doi.org/10.52842/conf.acadia.2008.364
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 364-369
summary	In this research project we explore the defined design and application of digitally fabricated wall panels for room-acoustical architectural interventions. In Particular, we investigate the room-acoustical criteria applying to everyday used spaces. We present a digital design and fabrication process developed to create non-standardised panels and two case studies which apply this process on the acoustical improvement of a specific room situation. Our aim is to find correlations between digitally fabricated surface structures and sound- aesthetical characteristics, in order to utilise these for the architectural design.
keywords	Acoustics; Digital Fabrication; Evaluation; Material; Robotics
series	ACADIA
last changed	2022/06/07 07:54

_id	ecaade2008_194
id	ecaade2008_194
authors	Brown, Andre; Winchester, Martin; Knight, Mike
year	2008
title	Panoramic Architectural Art: Real-Digital Interaction as a Catalyst
doi	https://doi.org/10.52842/conf.ecaade.2008.751
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 751-756
summary	This paper describes an integrated cross-disciplinary project in which digital technologies have been used as a vehicle to bring together material, educators and students from a variety of backgrounds. A significant piece of new art, commissioned for the Capital of Culture year (2008) in Liverpool, has been the centre-piece and catalyst for the project.
keywords	Art: Interactive: Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdc2008_137
id	cdc2008_137
authors	Cardoso, Daniel
year	2008
title	Certain assumptions in Digital Design Culture: Design and the Automated Utopia
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 137-148
summary	Much of the research efforts in computational design for Architecture today aim to automate or bypass the production of construction documents as a means of freeing designers from the sticky and inconvenient contingencies of physical matter. This approach has yielded promising questions and applications, but is based on two related assumptions that often go unnoticed and that I wish to confront: 1. Designers are more creative if the simulations they rely on engage only with the superficial aspects of the objects they design (rather than with their structural and material-specific behaviors) and 2. The symbolic 3-D environments available in current design software are the ideal media for design because of their free nature as modeling spaces. These two assumptions are discussed both as cultural traits and in their relation to digital design technologies. The work presented is a step towards the far-sighted goal of answering the question: how can computation enable new kinds of dialogue between designer, design media and construction in a design process? In concrete, this paper proposes a critical framework for discussing contemporary digital design practices as a continuity –rather than as a rupture- of a long-standing tradition in architecture of separating design and construction.
email
last changed	2009/01/07 08:05

_id	acadia08_340
id	acadia08_340
authors	Chalmers, Chris
year	2008
title	Chemical Signaling as a Model for Digital Process in Architecture
doi	https://doi.org/10.52842/conf.acadia.2008.340
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 340-345
summary	The role of the architect is quite literally one of assembly: synthesizing the various parts of a project into a cohesive whole. It is a difficult job, often requiring the architect to weave many seemingly contradictory concerns into a solution that benefits them all. It is not surprising then, that the many elegant and effective systems found in nature should be inspiring to the architect. Emerging fields like biomimicry and systems dynamics model the patterns of interaction between organisms and their environments in terms of dynamic part to part and part to whole relationships. ¶ Observations of real relationships between organisms and their environments, as they exist in nature, reveal complex feedback loops working across multiple scales. These feedback loops operate by the simultaneous action of two observed phenomena. The first is the classic phenotypic relationship seen when organisms of the same genetic makeup instantiate differently based upon differences in their environment. This is the relationship that was originally proposed by Charles Darwin in his theory of natural selection of 1859. Darwin’s model is unidirectional: the organism adapts to its environment, but not the other way around. It operates at the local scale as individual parts react to the conditions of the whole. (Canguilhem, 1952). ¶ The second phenomenon, which sees its effect at the global scale, is the individual’s role as consumer and producer in the flows of energy and material that surround it. It is the subtle and incremental influence of the organism upon its environment, the results of which are often invisible until they reach a catastrophic threshold, at which point all organisms in the system feel global changes. ; The research presented in this paper addresses the dialectic between organism and environment as each responds reciprocally to the others’ changing state. Such feedback loops act in a non-linear fashion, across nested scales in biological systems. They can be modeled to act that way in a digital design process as well. This research is an exploration into one such model and its application to architecture: the simple communication between organisms as they affect and are affected by their environments through the use of signal chemicals.
keywords	Biology; Cellular Automata; Feedback; Material; Scripting
series	ACADIA
last changed	2022/06/07 07:55

_id	acadia08_082
id	acadia08_082
authors	Del Campo, Matias; Sandra Manninger
year	2008
title	Speculations on Tissue Engineering and Architecture
doi	https://doi.org/10.52842/conf.acadia.2008.082
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 82-87
summary	The main aim of this paper is to speculate on opportunities inherent in the field of tissue engineering, for possible applications in the discipline of architecture. Engineered solutions based on the discoveries within the discipline of Tissue engineering can yield novel building materials and construction methods. These entire conjectures mean a different approach to the trajectories of architectural production, abandoning mechanical solutions for architecture problems in favor of biological, organ driven architectonic conditions.
keywords	Algorithm; Construction; Digital Fabrication; Material; Topology
series	ACADIA
last changed	2022/06/07 07:55

_id	acadia08_300
id	acadia08_300
authors	Doumpioti, Christina
year	2008
title	Adaptive Growth of Fibre Composite Structures
doi	https://doi.org/10.52842/conf.acadia.2008.300
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 300-307
summary	The core idea of this research is the incorporation of the morphogenetic principles found in natural systems in the generation of fibre-composite structures by exploiting, at the maximum, the intrinsic performative capacities of the material system in use. The intention is the integration of form, material, structure and program into a multi-performative system that will satisfy simultaneously several, even conflicting objectives, in order to achieve an optimal compromise. This process involves the combination and implementation of concepts and methods based on precedent studies in the field of biomimetics, as well as form-finding digital and physical experiments that inform a coherent design methodology, leading to a structural system able to be fabricated using cutting-edge technology.
keywords	Adaptation; Composite; Fiber; Integrative; Morphogenesis
series	ACADIA
last changed	2022/06/07 07:55

_id	acadia08_034
id	acadia08_034
authors	Díaz Moreno, Cristina; Efrén García Grinda
year	2008
title	ATMOSPHERE: Material for the digital gardener
doi	https://doi.org/10.52842/conf.acadia.2008.034
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 34-37
series	ACADIA
last changed	2022/06/07 07:55

_id	cdc2008_105
id	cdc2008_105
authors	Friedrich, Christian
year	2008
title	Information-matter hybrids: Prototypes engaging immediacy as architectural quality
source	First International Conference on Critical Digital: What Matters(s)? - 18-19 April 2008, Harvard University Graduate School of Design, Cambridge (USA), pp. 105-110
summary	‘Immediate Architecture’ is an exploratory investigation into possibilities of immediate interactive and constructive interaction with the built environment supported by digital technologies. Aim is to realize interactive reconfigurable architectural objects that support their informational and material reconfiguration in real-time. The outcome is intended to become a synergetic amalgam of interactive architecture, parametric design environment, automated component fabrication and assembly. To this end, computational and material strategies are developed to approach the condition of immediate architecture and applied in real-world prototypes. A series of developed techniques are presented, ranging from realtime volumetric modeling, behavioral programming and meta-application protocol to streaming fabrication and dynamic components for interactive architecture.
email
last changed	2009/01/07 08:05

_id	acadia08_072
id	acadia08_072
authors	Frumar, Jerome
year	2008
title	An Energy Centric Approach to Architecture: Abstracting the material to co-rationalize design and performance
doi	https://doi.org/10.52842/conf.acadia.2008.072
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 72-81
summary	This paper begins by exploring matter as an aggregated system of energy transactions and modulations. With this in mind, it examines the notion of energy driven form finding as a design methodology that can simultaneously negotiate physical, environmental and fabrication considerations. The digital workspace enables this notion of form finding to re-establish itself in the world of architecture through a range of analytic tools that algorithmically encode real world physics. Simulating the spatial and energetic characteristics of reality enables virtual “form generation models that recognize the laws of physics and are able to create ‘minimum’ surfaces for compression, bending [and] tension” (Cook 2004). The language of energy, common in engineering and materials science, enables a renewed trans-disciplinary dialogue that addresses significant historic disjunctions such as the professional divide between architects and engineers. Design becomes a science of exploring abstracted energy states to discover a suitable resonance with which to tune the built environment. ¶ A case study of one particular method of energy driven form finding is presented. Bi-directional Evolutionary Structural Optimization (BESO) is a generative engineering technique developed at RMIT University. It appropriates natural growth strategies to determine optimum forms that respond to structural criteria by reorganizing their topology. This dynamic topology response enables structural optimization to become an integrated component of design exploration. A sequence of investigations illustrates the flexibility and trans-disciplinary benefits of this approach. Using BESO as a tool for design rather than purely for structural optimization fuses the creative approach of the architect with the pragmatic approach of the engineer, enabling outcomes that neither profession could develop in isolation. The BESO case study alludes to future design processes that will facilitate a coherent unfolding of design logic comparable to morphogenesis.
keywords	Energy; Form-Finding; Morphogenesis; Optimization; Structure
series	ACADIA
last changed	2022/06/07 07:50

_id	acadia08_182
id	acadia08_182
authors	Gibson, Michael; Kevin R. Klinger; Joshua Vermillion
year	2008
title	Constructing Information: Towards a Feedback Ecology in Digital Design and Fabrication
doi	https://doi.org/10.52842/conf.acadia.2008.182
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 182-191
summary	As strategies evolve using digital means to navigate design in architecture, critical process-based approaches are essential to the discourse. The often complex integration of design, analysis, and fabrication through digital technologies is wholly reliant upon a process-basis necessitating the use of a design feedback loop, which reinforces critical decision-making and challenges the notions of how we produce, visualize, and analyze information in the service of production and assembly. Central to this process-based approach is the effective and innovative integration of information and the interrogation of material based explorations in the making of architecture. This fabrication ‘ecology’ forces designers to engage complexity and accept the unpredictability of emergent systems. It also exposes the process of working to critique and refine feedback loops in light of complex tools, methods, materials, site, and performance considerations. In total, strategies for engaging this ‘ecology’ are essential to accentuate our present understanding of environmental design and theory in relation to digital processes for design and fabrication. ¶ This paper recounts a design/fabrication seminar entitled “Constructing Information” in which architecture students examined an environmental design problem by way of the design feedback loop, where their efforts in applying digital design and fabrication methods were driven explicitly by material and site realities and where their work was executed, installed, and critically explored in situ. These projections raise important questions about how information, complexity, and context overlay and merge, and underscore the critical potential of visual, spatial, and material effects as part of a fabrication-oriented design process.
keywords	Digital Fabrication; Ecology; Environment; Feedback; Performance
series	ACADIA
last changed	2022/06/07 07:51

For more results click below: