Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	acadia08_208
id	acadia08_208
authors	Griffiths, Jason
year	2008
title	Man + Water + Fan = Freshman: Natural Process of Evaporative Cooling and the Digital Fabrication of the ASU Outdoor Dining Pavilion
doi	https://doi.org/10.52842/conf.acadia.2008.208
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 208-213
summary	To the east of Johnson City TX is the Lyndon B. Johnson’s family home. Part of the Johnson Estate2 is given over to a working farm circa 1870 that presents various aspects of domestic practice from the era. This includes a desert fridge which is a simple four-legged structure with a slightly battered profile that’s draped in calico. Its principle is simple; water from an upturned jar is drawn by osmosis down the sides of the calico where it evaporates in wind currents drawn though a “dog run” between two log cabins. Cooled air circulates within the structure and where cheese and milk are kept fresh during the summer. The desert fridge is a simple system that reaches a state of equilibrium through the natural process of evaporation. ¶ This system provides a working model for a prototype structure for an outdoor dining pavilion that was designed and constructed on the campus of Arizona State University. The desert fridge is the basis for a “biological process”3 of evaporative cooling that has been interpreted in terms a ritual of outdoor dining in arid climates. The pavilion is intended as a gathering point and a place of interaction for ASU freshmen. The long-term aim of this project is to provide a multiple of these pavilions across the campus that will be the locus of a sequence of dining events over a “dining season”4 during the fall and spring semester. ; This paper describes how the desert fridge principle has been interpreted in the program and construction of the dining pavilion. It explores a sequence of levels by which the structure, via digital production process, provides an educational narrative on sustainability. This communicative quality is portrayed by the building in direct biological terms, through tacit knowledge, perceived phenomena, lexical and mechanical systems. The paper also describes how these digital production process were used in the building’s design and fabrication. These range from an empirical prognosis of evaporative cooling effects, fluid dynamics, heat mapping and solar radiation analysis through to sheet steel laser cutting, folded plate construction and fully associative variable models of standard steel construction. The aim of the pavilion is to create an environment that presents the evaporative cooling message at a multiple of levels that will concentrate the visitor in holistic understanding of the processes imbued within the building.5
keywords	Communication; Digital Fabrication; Environment; System
series	ACADIA
last changed	2022/06/07 07:51

_id	kasyanov02_paper_eaea2007
id	kasyanov02_paper_eaea2007
authors	Kasyanov, Nikolai
year	2008
title	Study of Architectural Shape Formation in Comparison with Natural Morphogenesis Using Computer Simulation
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	Geometric accuracy of architectural computer models allows to percept and to analyze the three-dimensional spatial compositions using computer images. The concepts and methodology of modern interdisciplinary science, in particular fractal geometry, have already been successfully applied in the various scientific fields, as astronomy, physics, chemistry, biology. Modern ecological paradigm does not separate human life and anthropogenic world from the natural environment considering all as unitary nonlinear ecosystem. The analysis of the architectural shape formation is a part of the study of morphogenesis in such different worlds, as non-living and living nature and man-made forms – real as well as virtual architecture.
keywords	morphogenesis, architectural landscape, computer simulations
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	lapshina02_paper_eaea2007
id	lapshina02_paper_eaea2007
authors	Lapshina, Elena
year	2008
title	Architecture as a Space of Images and An Image of Space-World
source	Proceedings of the 8th European Architectural Endoscopy Association Conference
summary	The architectural space formed within this or that type of culture is observed. The searching of the space basement of the traditional cultures and the modern man-caused civilizations is accented. In both cases the space organization is a reflection of a certain world outlook system. There are some examples of architectural reconstruction of lost space structures of some traditional cultures with using of modern ones within the techno-culture technical devices.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	acadia08_192
id	acadia08_192
authors	Lee, Charles
year	2008
title	The Thermal Organism And Architecture
doi	https://doi.org/10.52842/conf.acadia.2008.192
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 192-199
summary	Throughout the history of architectural discourse the concept of metabolic function in a building and a buildings relationship to its creators is expressed by keen designers who understand the subtle linkage. Organistic homeostasis is a biological function found in all mammals including humans. The interior generation of heat classifies man as endothermic. Endothermic heat generation allows for a very controlled equilibrium and is a characteristic of more complex organisms. The body has produced highly evolved surface systems to help efficiently manage the flow of heat energy in and out of the body. I suggest building envelopes represent the human being projecting itself outwards in a prosthetic extension of the skin. Inherent in this projection are the same demands of envelope put forth in the body. In my research of anatomy I have found one system that has evolved to help facilitate endothermic heat regulation in mammals at the skin level, which is hair. How does hair transcribe into architecture? An analysis into the function of hair and its adaptable morphologies is studied. Hair is a thermal regulating system, its building equivalent are forms of thermal insulation and radiant barriers. Hairs goal is homeostatic equilibrium which has its architectural counterpoint known as the balance point. Hair is an adjustable system that mitigates between internal and external heat loading which is the goal of a building envelope. In conclusion the paper explores these issues and more in new building systems and design tactics that originate from the function of hair.
keywords	Biology; Biomimetics; Design; Environment; Responsive
series	ACADIA
last changed	2022/06/07 07:51

_id	acadia08_272
id	acadia08_272
authors	Perez, Santiago R.
year	2008
title	Crafting Complexity: Material / Procedure / Form
doi	https://doi.org/10.52842/conf.acadia.2008.272
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 272-277
summary	What is the role of Craft, in understanding Bio-Computational Forms & Systems? What is the relation between self-organizing systems & material-component assemblages? ¶ This paper will explore the relationship between material craft, procedure and form, in relation to complex, self-organizing assemblies. A comparison will be made, between (hand) crafted assemblies, guided by physical constraints and procedural methodologies, and digitally mediated fabrication, guided by recursion and algorithmic generative methodologies. ¶ An attempt will be made to connect various scales of making, in terms of module or unit of assembly, both at the micro-scale of biological structures, and the macro-scale of man-made systems. The goal of this essay is to question the relation between physically crafted component assemblies, as a means for exploring adaptive, complex, self-organizing systems, and bio-computational paradigms as a source of adaptive strategies for making.
keywords	Adaptation; Complexity; Craft; Material; Play
series	ACADIA
last changed	2022/06/07 08:00

_id	ecaade2008_161
id	ecaade2008_161
authors	Pupo, Regiane; Pinto Duarte, José; Celani, Gabriela
year	2008
title	Introducing digital fabrication into the architectural curriculum
doi	https://doi.org/10.52842/conf.ecaade.2008.517
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 517-524
summary	The present paper describes two similar experiences in the setting up of digital fabrication laboratories in architectural schools and the introduction of such techniques in the schools curriculum, with the aim of answering the following questions: how long – and how much – does it take to incorporate these new technologies in a traditional architectural course? Both experiences were held in Portuguese-speaking countries, but within very different economic and cultural contexts (Europe and South-America).
keywords	Rapid prototyping, digital fabrication, fabrication techniques for architecture, architectural curriculum
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2008_138
id	ecaade2008_138
authors	Sdegno, Alberto
year	2008
title	Palladio’s Bridges: Graphic Analysis and Digital Interpretations
doi	https://doi.org/10.52842/conf.ecaade.2008.043
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 43-50
summary	The paper presents some results of a research on the digital reconstruction of some bridges designed by Andrea Palladio. The use of new technologies has enabled us to investigate the morphology of every single element and to be compared each other. Using the method of video animation, we have analyzed some of them in order to simulate the human perception and to understand their spatial configuration, but also to visualize the point of view of a man crossing a river or a canal. The last step was to prepare the models for producing some physical maquettes with the technique of rapid prototyping that have enabled us to verify the quality of the digital construction. Some different kinds of powder were used to identify the best one for the representation of architecture.
keywords	Digital reconstruction, geometric analysis, unbuilt projects, video, rapid prototyping
series	eCAADe
email
last changed	2022/06/07 07:59

_id	9609
id	9609
authors	Abdelmohsen, Sherif; Do, Ellen Yi-Luen
year	2008
title	Energy Puppet: An Ambient Awareness Interface for Home Energy Consumption
source	Digital proceedings of the 7th International Workshop on Social Intelligence Design (SID 2008), School of Architecture, Universidad de Puerto Rico, San Juan, Puerto Rico.
summary	The Energy Puppet is an ambient display device that provides peripheral awareness of energy consumption for individual home appliances. The display produces different “pet-like” behavioral reactions according to energy use patterns of the appliances to give homeowners an indication of their energy consumption status. The puppet would raise its “arms” in victory to display normal consumption rate, or its “eyes” would change color to red and “roar” to warn the homeowners when the specific appliance reaches dangerously high consumption rates. The assumption is that the awareness of energy consumption could affect how people consume and control energy use in their households. This paper describes the usage scenarios and the design and implementation of Energy Puppet and discusses future research directions.
keywords	Ambient Intelligence, Peripheral Awareness, Energy Consumption
series	other
type	normal paper
email
last changed	2010/01/30 07:22

_id	cf2011_p109
id	cf2011_p109
authors	Abdelmohsen, Sherif; Lee Jinkook, Eastman Chuck
year	2011
title	Automated Cost Analysis of Concept Design BIM Models
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 403-418.
summary	AUTOMATED COST ANALYSIS OF CONCEPT DESIGN BIM MODELS Interoperability: BIM models and cost models This paper introduces the automated cost analysis developed for the General Services Administration (GSA) and the analysis results of a case study involving a concept design courthouse BIM model. The purpose of this study is to investigate interoperability issues related to integrating design and analysis tools; specifically BIM models and cost models. Previous efforts to generate cost estimates from BIM models have focused on developing two necessary but disjoint processes: 1) extracting accurate quantity take off data from BIM models, and 2) manipulating cost analysis results to provide informative feedback. Some recent efforts involve developing detailed definitions, enhanced IFC-based formats and in-house standards for assemblies that encompass building models (e.g. US Corps of Engineers). Some commercial applications enhance the level of detail associated to BIM objects with assembly descriptions to produce lightweight BIM models that can be used by different applications for various purposes (e.g. Autodesk for design review, Navisworks for scheduling, Innovaya for visual estimating, etc.). This study suggests the integration of design and analysis tools by means of managing all building data in one shared repository accessible to multiple domains in the AEC industry (Eastman, 1999; Eastman et al., 2008; authors, 2010). Our approach aims at providing an integrated platform that incorporates a quantity take off extraction method from IFC models, a cost analysis model, and a comprehensive cost reporting scheme, using the Solibri Model Checker (SMC) development environment. Approach As part of the effort to improve the performance of federal buildings, GSA evaluates concept design alternatives based on their compliance with specific requirements, including cost analysis. Two basic challenges emerge in the process of automating cost analysis for BIM models: 1) At this early concept design stage, only minimal information is available to produce a reliable analysis, such as space names and areas, and building gross area, 2) design alternatives share a lot of programmatic requirements such as location, functional spaces and other data. It is thus crucial to integrate other factors that contribute to substantial cost differences such as perimeter, and exterior wall and roof areas. These are extracted from BIM models using IFC data and input through XML into the Parametric Cost Engineering System (PACES, 2010) software to generate cost analysis reports. PACES uses this limited dataset at a conceptual stage and RSMeans (2010) data to infer cost assemblies at different levels of detail. Functionalities Cost model import module The cost model import module has three main functionalities: generating the input dataset necessary for the cost model, performing a semantic mapping between building type specific names and name aggregation structures in PACES known as functional space areas (FSAs), and managing cost data external to the BIM model, such as location and construction duration. The module computes building data such as footprint, gross area, perimeter, external wall and roof area and building space areas. This data is generated through SMC in the form of an XML file and imported into PACES. Reporting module The reporting module uses the cost report generated by PACES to develop a comprehensive report in the form of an excel spreadsheet. This report consists of a systems-elemental estimate that shows the main systems of the building in terms of UniFormat categories, escalation, markups, overhead and conditions, a UniFormat Level III report, and a cost breakdown that provides a summary of material, equipment, labor and total costs. Building parameters are integrated in the report to provide insight on the variations among design alternatives.
keywords	building information modeling, interoperability, cost analysis, IFC
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ecaade2009_123
id	ecaade2009_123
authors	Achten, Henri; Beetz, Jakob
year	2009
title	What Happened to Collaborative Design?
doi	https://doi.org/10.52842/conf.ecaade.2009.357
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 357-366
summary	In this paper we present the results of a comprehensive literature survey on the development of collaborative design. We reviewed 324 papers on collaborative design, taken from various sources (conferences, journals, and PhD-theses). We grouped the papers based on common themes, and in that way derived a classification of themes through the last 25 years (1983-2008). Each category is described, its development, and key publications are identified.
wos	WOS:000334282200043
keywords	Collaborative design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	5d77
id	5d77
authors	Adriane Borda; Neusa Félix; Janice de Freitas Pires; Noélia de Moraes Aguirre.
year	2008
title	MODELAGEM GEOMÉTRICA NOS ESTÁGIOS INICIAIS DE APRENDIZAGEM DA PRÁTICA PROJETUAL EM ARQUITETURA. GEOMETRIC MODELING IN THE EARLY STAGES OF LEARNING PRACTICE ARCHITECTURAL DESIGN.
source	12th Iberoamerican Congress of Digital Graphics, SIGRADI, 2008, Havana. SIGRADI, Proceedings of the 12th Iberoamerican Congress of Digital Graphics.. Havana : Ministerio de Educacion Superior, 2008. p. 434-438.
summary	This work invests on delimitation of a Geometric Modeling study program directed to students at the initial stages of Architecture. It is considered that the studies promote a qualified control of the form based on recognition of parameters which define it, moreover it also allows the enlargement of the students geometric vocabulary, important to the architectural design activities. In this way, the program advances on the appropriation of new concepts which surround the investigations on architectural design processes, such as the concept of shape grammar. Observing analysis and architectural composition practices based on such concept, contents of geometric modeling which are already being used in the context of post-graduation are identified to be transposed to the graduation context, along with the initial teaching practices of architectural design. The results refer to making the didactic material available, these materials have the objective of building references for the development of design practice which explore the reflection about the processes of creation and composition of architectural form in their geometric aspects.
keywords	Architecture, Geometric Modeling, Shape grammar, Teaching/Learning
series	SIGRADI
type	normal paper
email
last changed	2016/03/10 09:47

_id	bbc9
id	bbc9
authors	Aeck, Richard
year	2008
title	Turnstijl Houses & Cannoli Framing
source	VDM Verlag Dr. Muller Aktiengesellschaft Co. KG, Germany ISBN: 3639078470 ISBN-13: 9783639078473
summary	This work presumes that integrating modeling tools and digital fabrication technology into architectural practice will transform how we build the detached house. Single-family houses come in all shapes and sizes, and in doing so, imply variation as well in certain materials, methods, and lighter classes of structure. Ultimately, houses are extensions, if not expressions, of those dwelling within, yet our attempts to produce appealing manufactured houses have prioritized standardization over variation and fall short of this ideal. Rather than considering new offerings born of the flexibility and precision afforded by digital production, sadly, today’s homebuilders are busy using our advancing fabrication technology to hasten the production of yesterday’s home. In response to such observations, and drawing upon meta-themes (i.e., blending and transition) present in contemporary design, this study proposes a hybrid SIP/Lam framing system and a corresponding family of houses. The development of the Cannoli Framing System (CFS) through 3D and physical models culminates in the machining and testing of full-scale prototypes. Three demonstrations, branded the Turnstijl Houses, are generated via a phased process where their schema, structure, and system geometry are personalized at their conception. This work pursues the variation of type and explores the connection between type and production methodology. Additional questions are also raised and addressed, such as how is a categorical notion like type defined, affected, and even “bred”?
keywords	Digital Manufacturing, Type, Typology, CNC, SIP, SIPs, Foam, PreFab, Prefabrication, Framing, Manufactured House, Modular, Packaged House, Digital, Plywood, Methodology
series	thesis:MSc
type	normal paper
email
more	http://branchoff.net
last changed	2010/11/16 08:29

_id	ijac20086405
id	ijac20086405
authors	Ahlquist, Sean; Fleischmann, Moritz
year	2008
title	Elemental Methods for Integrated Architectures: Experimentation with Design Processes for Cable Net Structures
source	International Journal of Architectural Computing vol. 6 - no. 4, 453-475
summary	Tension active systems are compelling architectural structures having an intimate connection between structural performance and the arrangement of material. The direct flow of structural forces through the material makes these systems attractive and unique from an aesthetic point of view, but they are a challenge to develop from a design and an engineering perspective. Traditional methods for solving such structural systems rely on both analog modeling techniques and the use of highly advanced engineering software. The complexity and laborious nature of both processes presents a challenge for iterating through design variations. To experiment with the spacemaking capabilities of tension active systems, it is necessary to design methods that can actively couple the digital simulation with the analog methods for building the physical structure. What we propose is a designer-authored process that digitally simulates the behaviors of tension active systems using simple geometric components related to material and structural performance, activated and varied through elemental techniques of scripting. The logics for manufacturing and assembly are to be embedded in the digital generation of form. The intention is to transform what is a highly engineered system into an architectural system where investigation is as much about the determination of space and environment as it is about the arrangement of structure and material.
series	journal
last changed	2009/03/03 07:48

_id	acadia08_066
id	acadia08_066
authors	Ahlquist, Sean; Moritz Fleischmann
year	2008
title	Material & Space: Synthesis Strategies based on Evolutionary Developmental Biology
doi	https://doi.org/10.52842/conf.acadia.2008.066
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 66-71
summary	A material system can be defined as a set of self-organized materials, defining a certain spatial arrangement. In architecture, this material arrangement acts as a threshold for space, though space often only appears as a by-product of the material organization. Treating space as a resulting, therefore secondary, independent product minimizes the capacity to generate architecture that is astutely aware of concerns of functionality, environment and energy. An effective arrangement of material can only be determined in relation to the spaces that it defines. When proposing a more critical approach, a material system can be seen as an intimate inter-connection and reciprocal exchange between the material construct and the spatial conditions. It is necessary to re-define material system as a system that coevolves spatial and material configurations through analysis of the resultant whole, in a process of integration and evaluation. ¶ With this understanding of material system comes an expansion in the number of criteria that are simultaneously engaged in the evolution of the design. The material characteristics, as well as the spatial components and forces (external and internal), are pressures onto the arrangement of material and space. ¶ This brings a high degree of complexity to the process. Biological systems are built on methods that resolve complex interactions through sets of simple yet extensible rules. Evolutionary Developmental Biology explains how growth is an interconnected process of external forces registering fitness into a fixed catalogue of morphological genetic tools. Translating the specific framework for biological growth into computational processes, allows the pursuit of an architecture that is fully informed by the interaction of space and material.
keywords	Biology; Computation; Material; Parametric; System
series	ACADIA
last changed	2022/06/07 07:54

_id	caadria2008_27_session3b_221
id	caadria2008_27_session3b_221
authors	Al-Haddad, Tristan
year	2008
title	Parametric modulations in Masonry
doi	https://doi.org/10.52842/conf.caadria.2008.221
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 221-228
summary	The focus of the research presented in this paper asks how a designer can create a flexible system of physical making which can accommodate multiple programmatic functions within a smooth whole, rather than creating an a priori singular formal object. This adaptable system of construction works through the development of an intelligent CAD model that can be mapped to a flexible manufacturing mechanism, i.e. a reconfigurable mold. This system of manufacturing can be used to cast totally unique solid modules without creating a unique mold for each part by manipulating the topological structure of the system. This approach takes the notion of mass-customization beyond the expensive and unsustainable one-offs that the design world has seen recently, and into a new paradigm of a sustainable, economically viable world of mass-customizable form and space.
keywords	Parametrics, Variability, Reconfigurability, UHPC, Topology, Molding, Casting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2008_084
id	ecaade2008_084
authors	Alaçam Aslan, Sema; Çagdas, Gülen
year	2008
title	An Interface Proposal for Collaborative Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.2008.319
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 319-324
summary	The aim of this paper is to explore how new technological opportunities affect approaches of designers during collaborative architectural design process. Which factors affect the communication and the quality of interaction? The study is based on two phases: the data input by the designer via devices to the computer environment and the transformation of data into design product in the software by scripting addition. Input devices that are used are 3D mouse, graphic tablet as a tangible interface and implementation of second mouse besides a standard mouse and keyboard. The potential usage of these interfaces in collaborative architectural design process is discussed and proposals are developed in 3ds max scripting environment.
keywords	Collaborative design, human-computer interaction, user participation in design
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia08_448
id	acadia08_448
authors	Alfaris, Anas; Riccardo Merello
year	2008
title	The Generative Multi-Performance Design System
doi	https://doi.org/10.52842/conf.acadia.2008.448
source	Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 448-457
summary	This paper proposes a framework for an integrated computational design system. This design system builds on the strengths inherent in both generative synthesis models and multi-performance analysis and optimization. Four main design mechanisms and their mathematical models are discussed and their integration proposed. The process of building the design system begins by a top-down decomposition of a design concept. The different disciplines involved are decomposed into modules that simulate the respective design mechanisms. Subsequently through a bottom-up approach, the design modules are connected into a data flow network that includes clusters and subsystems. This network forms the Generative Multi-Performance Design System. This integrated system acts as a holistic structured functional unit that searches the design space for satisfactory solutions. The proposed design system is domain independent. Its potential will be demonstrated through a pilot project in which a multi-performance space planning problem is considered. The results are then discussed and analyzed.
keywords	Analysis; Behavior; Generative; Optimization; Performance
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	caadria2008_3_session1a_029
id	caadria2008_3_session1a_029
authors	Ambrose, Michael A., Carl Lostritto, Luc Wilson
year	2008
title	Animate education Early Design Education Pedagogy
doi	https://doi.org/10.52842/conf.caadria.2008.029
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 29-35
summary	This paper presents a novel approach to the introduction and use of animation and motion graphics in foundation design education. Design inquiry and understanding as generated from, and translated by, movement is the focus. This work explores animation as a design methodology in the first weeks of architectural education. The proposed design exercise discussed here will probe the concept/context and spatial/visual literacy of the learned sense of space-time in architectural design education and representation. Here the digital application of animation and motion graphics is intended to be process driven to encourage students to find an attitude about solutions rather than a solution to the design project. The intention is to examine the relationship between form and space through a structured exploration of movement within a kit-of-parts design project that explores a three-dimensional spatial construct. Animation as a design method poses unique potentials and pitfalls. Animation and motion graphics, as a collection of instances, is both questioned and exaggerated. This project creates a threshold experience of learning that puts in motion an exploration of integrated digital process and design product.
keywords	Education, design theory, design studies, animation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2008_53_session5b_437
id	caadria2008_53_session5b_437
authors	Ambrose, Michael A.; Lisa Lacharité
year	2008
title	Representation and re-Presentation: Emerging Digital Conventions of Architectural Communication
doi	https://doi.org/10.52842/conf.caadria.2008.437
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 437-444
summary	This paper examines the theoretical and conceptual underpinnings of digital architectural representation. Emerging digital tools, processes, and methods are sponsoring new conventions for the communication of architectural ideas and motives. New conventions yielded through digital media offer fresh and currently uncodified ways to communicate. These new conventions attempt to communicate the same ideas as the old, sometimes subverting the imperative for drawing as the representation does not refer to information in the abstract, but literally is the information. This research explores the use of architectural conventions, such as plan, section, and perspective, to examine re-presentation—not only a way to convey form and content, but to also to be used as a form of communication. The emerging digital conventions are forms of communication situated between representation and re-presentation.
keywords	Education, design theory, digital design representation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2008_080
id	sigradi2008_080
authors	Andrés, Roberto
year	2008
title	Hybrid Art > Synthesized Architecture
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	This paper investigates possible intersections between some contemporary artistic modalities and architectural practice. At first, it describes and discusses different uses of art in architectural history. Through the analyzes of Le Corbusier’s artistic and architectural practices, it observes the limits of looking at art as only ‘inspiration’ for architectural form and points to the necessity of surpassing this formal approach. More than bringing pictorial ‘inspiration’, art, as a experimental field, can change our architectural procedures and approaches - a much richer and powerful addition to the development of architecture. It discusses then, the confluence of architecture, information and communication technologies. Very commonly present in our contemporary life, not only on the making of architecture – computer drawings and modeling of extravagant buildings – nor in ‘automated rooms’ of the millionaire’s houses. Televisions, telephones and computers leave the walls of our houses “with as many holes as a Swiss cheese”, as Flusser has pointed. The architecture has historically manipulated the way people interact, but this interaction now has been greatly changed by new technologies. Since is inevitable to think the contemporary world without them, it is extreme urgent that architects start dealing with this whole universe in a creative way. Important changes in architecture occur after professionals start to research and experiment with different artistic medias, not limiting their visions to painting and sculpture. The main hypothesis of this paper is that the experiments with new media art can bring the field of architecture closer to information and communication technologies. This confluence can only take form when architects rise questions about technology based interaction and automation during their creative process, embodying these concepts into the architecture repertoire. An educational experience was conducted in 2007 at UFMG Architecture School, in Brazil, with the intention of this activity was to allow students to research creatively with both information technology and architecture. The students’ goal was to create site-specific interventions on the school building, using physical and digital devices. Finally, the paper contextualizes this experience with the discussion above exposed. Concluding with an exposition of the potentialities of some contemporary art modalities (specially the hybrid ones) in qualifying architectural practices.
keywords	Architecture; Information and Communication Technologies; Digital Art; Site Specific Art; Architectural Learning.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: